How to set the Intermatic Sprinkler timer (irrigation controller, valves, etc)

[@nadiagraveran3289]

I don’t think you understand how much you’ve jus helped me. My father recently passed away and It’s been nearly impossible to understand how to do everything that is now up to us to maintain the yard and essentially everything from toilets to tub fixtures... thank you so much for this! I tried messing with our sprinkler system and messed the timer up so I’m so thankful that now I have a firm understanding due to your video. God bless you!!!🙏🏻🙏🏻

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@lilyb5968]

Thank you Mark, we are in Central Florida & appreciate your video help.

[@fortlauderdalegirl]

You are a life saver for this! Thank you very much from a fellow South Floridian 😎👍🏼 These control panels looked like Egyptian writings to me, your video is done in a timely, yet not too fast, manner. It was quite explanatory, thanks again!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@hellwitch6663]

Great video! Very comprehensive. Viewers can make the decision as to frequency of watering. if it’s looking dry and brown, add more days/time. if it’s green and growing like mad, cut down a bit.

[@markrogge3098]

Please take a minute to subscribe to my channel. That really helps me.

[@sarahdashew]

Thank you so much!! Just moved from Arizona and couldn’t figure out why the timer wouldn’t work automatically. Turns out every pin was pushed in to skip! 😂

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@intrepid_wandering]

Summer kicked up again and had the system off for 3 months, couldn't remember which was on or off, push or pull. Of course the highlighted answer on google was wrong, so thank you for this video, once again.

[@markrogge3098]

Please take a second to subscribe to my channel. It's free and that helps me

[@Nterprises]

Mark, thank you so much for this video! I just had my system re-done and was not sure if the timer was set properly. It's an Intermatic, too. Your video was SO helpful and I learned so much. Funny thing is, I am also in So FL - and the [side of the] house looks just like mine. :) You're the best!

[@jermaineallen2879]

Thanks here in south Florida. Video was very help ful. I had the days reversed. And didn’t know that one was for day advancement. Thanks.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@lindataylor5980]

Well spoken. Comprehensive video! I'm keeping my fingers crossed. Will know in 30 minutes, if I have success. The only thing I would add is to say, " To pull out the pins on the days you desire the sprinkler to run." ( I had to watch the gentleman's fingers.) It was a great video, and he spoke at a normal pace. I am very grateful this video has been produced:)

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@annecarson8942]

Amazingly clear, concise and straightforward! So helpful. Thank you!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@ejej6934]

Fantastic information. Believe it or not, the only instructions Intermatic gives you is the small sheet stuck inside the door of the timer housing. Really glad I found your video!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@lindataylor5980]

My sprinklers NOW run automatically because of this video!!!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@alinatomas8458]

I have gone for years depending without looking for a video; thank you.....:))

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@FLHunter3006]

Thank you so much for the video, just had one installed by somebody and I couldn't understand his quick instructions. Your really make sense!

[@toorgeman]

Intermatic needs to put you on their payroll. Great video

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@sergio089]

Thank you so much for the good explanation! New home owner here that had no idea how to use this in my new house

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@ablelili]

Thank YOU!!! Finally I understand how to set up that controller.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@CoolestDadEverWas]

Thank you so much for this video Mark! VERY well done and incredibly helpful.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@josephman5357]

Thank you very much for an awesome explanation! Finally I understood how this works!!!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@alexm4515]

Best video on this topic I found on KZbin. Thanks! Question:. 1. How to snap the board back correctly? 2. How to test it for first run? Thanks kindly

[@markrogge3098]

The board shouldn't be removed. If you replaced it I think you can tilt the top inward then the bottom where you add the screws.

[@frankpino7062]

Awesome vid, wished I had seen this before. Step by step info and well explained. TY

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@thebossman60]

Thank you very much. EXACTLY what I was looking for.

[@markrogge3098]

Please take ten seconds to subscribe to my channel

[@thebossman60]

@@markrogge3098 Done

[@pilotbarbie]

An incredibly helpful video. Thank you! 🇨🇦

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@pilotbarbie]

Consider it done!

[@mschristophersclass4149]

Thank you so much. I could not figure this thing out to save my life!!! Lol.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@crxmassive]

Great video. Sure didn't know how this thing works.

[@deapy1955]

thank you for sharing, this really has helped me.

[@markrogge3098]

Glad to help you... but help me by subscribing to my channel. Once i have enough subscribers to moneyize it I will start making a lot more videos.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@davidk4682]

Thanks, very helpful. I only have 4 zones, so i used 4 pins, with a space between each, starting at 4am. And then, only selected every 4th day. South Florida here too.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@Mtavarez1972]

Great video man! Very informative. My timer does not seem to be working automatically. I now no what to look for. Thanks for sharing

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@deannalebedz851]

Great video. Finally got it set correctly.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@timonlewis]

Thank you sir Liked 👍

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@bobhernandez7848]

Thank you for this video. I was going a bit nuts trying to figure my sprinkler system out. I actually have this same exact model. I think I may have to call you guys out to test my system completely. I live in Jupiter.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@user-fw6my3by1m]

very well explained

[@markrogge3098]

Glad to help you... but help me by subscribing to my channel. Once i have enough subscribers to moneyize it I will start making a lot more videos

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@williambrown9283]

Excellent descriptions and video work! Best yet on this subject.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@kristin4ik1984]

Thank you for this super helpful video (I’d never figure this whole thing out by myself), and Hello from Boca Raton! 🦎 😇 💚

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@isabellest-denis8662]

Great video Mark, thank you. However, you said you wanted to start watering at 4:00am but you put the pins backward making the watering start at 2:00am instead of 4:00am, just an observation..

[@markrogge3098]

Glad you picked up on that. Truth be told... i hate these timers and replace them all day long with smart controllers

[@Avtomav]

@@markrogge3098 Hello Mark, thank you for the video, it really help me to understand how my sprinkler system works, do you think I can replace this Sprinkler system with a smart system like the Wyze Sprinkler System ? Best Regards from Florida

[@JulioSilva-mt4rw]

you save my life, I was about to change this unit . Works perfect!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@inkyvoids]

thank you for this, really helped

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@marcusrobinson-Live4Love]

AWESOME video. God bless you. 😂. Seriously. All of a sudden my sprinklers stopped coming on at 7am and started coming on at noon on the set days. Couldn’t figure out why because I was not the one who set it previously and hand NO experience setting the timer and frequency. After watching your video I’m now educated on the matter and was able to put 2 & 2 together and realize that the guys putting a new roof on my neighbor’s house must’ve rotated the clock without asking me so that they wouldn’t get wet when they were working in between our homes. Dirty rats!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@joeilaria4785]

Thanks Mark. simple and quick.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@karenhennessey343]

Great video! Information is explained clearly.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@andrepurchases]

super helpful video thank you so much :) ... it's been years since I've had to change the pins/ times sprinkler goes off and honestly I was afraid of breaking something if I messed with the timer box :) ... your video gave me the reassurance I needed to go ahead and change the times (have a family member working a very early shift who is getting water sprayed at her now when she goes out in the morning :P ) .. thanks again :)

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@andrepurchases]

@@markrogge3098 already subscribed but you're absolutely right of course subscribers help a lot :) .. I don't know a lot about how the actual mechanics of it works but I've noticed a lot of youtubers saying "please subscribe " so it's got to help somehow :) .. thanks again :)

[@markrogge3098]

@andrepurchases thank you!! I used to get paid a few cents each view. Got a check for a hundred or two every few months then they changed the rules and you onky get paid if you ALSO have subscribers. Once I'm getting paid again I'll make a lot more videos.

[@lisarhein2300]

Thanks for this informative video!!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@mh5709]

I did what you showed with one exception. Should the day change pin be at the 12 AM position ( not 12Pm)?

[@peggypuskar8263]

I have an older model which needs replaced. Who would be the person to install a new model? Do I need an electrician or do I need someone from a water sprinkler company?

[@DLTHays]

Hello. I have this exact model but the clock doesn’t work. What do I have to do? Thanks!

[@tarus55]

Thank you so much, your video really helped me.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@lorenzanob]

Thank you so much for this video! Is rainy season here in Florida. I have the same one and I’ve been looking to find a rain sensor compatible with it. You help will be very much appreciated!

[@markrogge3098]

What city. Text 954-599-2602

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@bobd3707]

Still a great informative video. I have different size zones. Some need much less water. How do I set or know which zone starts the cycle.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@sandrasaladrigas5731]

I have the same timer, brand new, just installed. The settings are all correct on the timer, however it turns on at a random time, that is NOT set, and usually stays in for hours! Sometimes is goes to another zone. Ive spent over $1500 and the SAME thing keeps happening. Can you help me!? I live in WPB

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@enzorti6465]

What a great video.

[@venomous0229]

Thank you. Super informative

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@HotgyalB]

Thanks so much for this video!!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@andybrody]

I need to water each of my 4 zones for 24-36 minutes. Should I have 12-16 pins or can I just space out pins for longer watering? Say 8 pins?

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@SloJoeRacing]

Can we upgrade from a Intermatic controller to a rachio or does it require sprinkler system change?

[@markrogge3098]

Where are you located???

[@carltuzza8076]

Thx for your info, your a big help

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@henryecheverria239]

Gracias felicitaciones y siempre adelante

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@turtlecat7856]

Hello. Thank you for the help. Do you know how can I shut up one zone? I have 6. One I will cap the pipes and make a side walk. But than I still have 6 zones pipes. Im thinking about having only 5 clips of 12 min each . will it works?

[@markrogge3098]

The inherent problem with an index valve is that you do not have individual valve control. If you've got a 5 zone valve assuming you also have a 5 zone cam... you'll need to use 5 zones worth of pins.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@KellySGoins]

How do you make him run longer than 12 minutes?

[@drewsg3]

This was very helpful. Thank you. I have the same indexing valve setup, how difficult would it be for me to switch an individual solenoid setup?

[@markrogge3098]

Difficult, not for a professional. Expensive, sure. You would need to replace everything including the internamatic.

[@billlindsey411]

Great info, thank you!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@daisy0116]

HI Mark - great video, thanks! I have a timer like this (model R8806P101C) and everything seems to working EXCEPT that the time does not advance. There's power to the unit, but when I flip it to auto, it just sits there on whatever time I set it on. Am I missing something? The timer is only about 6 months old.

[@markrogge3098]

Broken clock motor. Replace the timer. Or upgrade. If your local callme and i can do.

[@mussfeldt]

Dude you just save me such more money!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@PappyNet01]

Great instructional video; thank you for sharing your knowledge. Now I am a bit frustrated with our Intermatic R8806P101C Sprinkler/Irrigation Time Switch with 14-Day Skipper. I am testing my settings again for the %&#& time; I set the pins according to the time-slots I want to water the lawn; however, when set in "Automatic" mode and after the clock-wheel advances to the next day - I expect to see the sprinkler's spraying water in the front yard on the contrary our system will always commence watering in the backyard. I am beginning to wonder if the backyard is the system's default "First Zone"? I am wondering if I have to add two-(2) additional gold pins for Index Valve Rotation; then that means I am watering two areas of the backyard before the front yard. Our system has the ability for four-(4) index valves, but whoever installed the irrigation system many years ago installed only three-(3) index valves. I just tested the Index valves; they rotate according to my test - yeah, but after midnight I am not too encouraged for tomorrow morning the true test if the front yard gets watered in the morning and the backyard gets watered in the afternoon.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@PappyNet01]

@@markrogge3098 I left a comment 3-years ago and I get a response today in 2023? How do you know if I am a subscriber or not?

[@bridgetsmith113]

Do you still assist customers in South Florida? I am having issues with mine where only one zone is turning on?

[@jefflane9737]

Replace the index valve, this happened to me as well.

[@brois841]

@@jefflane9737 test the valve first... you have to keep turning it on and off for it to index to the next zone. Every time you turn it on a different zone will come on.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@robertbutcher96]

Mark, I added a new Intermatic sprinkler timer here in sunny south Florida. However, it's not watering properly. I set it to water Mon, Wed, and Fri, but it's watering every day. So I adjusted it and the same problem. I pushed all the pins in to test it and it watered every day I pulled all the pins out and it watered every day. Should I return it to Home Depot? I hate disconnect it. Help.

[@davidrussell8871]

Very helpful! How do you manually advance the zones? Thanks!

[@adfeddon78]

I would like to know this also!

[@christopherjohn944]

If your trying to do it manually , flick knob to permanent on and to switch to the next zone turn off wait about 10 seconds then flick it back on and it’ll advance to the next zone

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@jimm2031]

I am renting a home in south florida and there is the exact same timer installed. The first day we were here the power was shut off thus messing with the timer.I was able to set the time correctly but noticed the system wasn't turning on anymore. All the day pins were pushed in.They have 4 zones but the timer had 8 pins starting at 4 AM. Am I correct in assuming there should only be 4 pins with one space in between each and not 8 pins with a space in between as it is now? Thanks

[@markrogge3098]

The timer is motorized. If the time isn't changing the power is off or the timer is broken. If your near 33327 weston we can handle the upgrades for you

[@jimm2031]

@@markrogge3098 You state that you like to start watering at 4 AM but the way you put the pins in you are actually starting a 2 AM. Wouldn't you put the pins in moving toward 6AM and not backwards toward 2AM, right? Also if I can ask, the way it was set up before you started pulling pins, the system was watering each zone for 24minutes if each pin waters for 12 minutes as there were 2 pins together then a space, then 2 pins etc. You said they were just watering 1 zone but that doesn't seem to be right. Just trying to learn. The way they have it here is 4 zones but 8 pins 2 together then space then 2 etc. Is 24 minutes per zone too much? Thanks

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@jimm2031]

Please help me on this one, Mark. My first water bill was close to $300 for just six weeks. The bill said usage was 65,300 gallons in 44 days. I find this amount to be excessive for 1 person to use. Thanks in advance for your reply.

[@speakeasy911]

I would like to upgrade my sprinkler timer to a smart timer that I can control from my phone. I was told that I have a 220 outlet but I need a 110 outlet for the smart sprinkler. How do I make it possible to upgrade to a smart timer? How expensive will it be? I'm in your service area.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@pni5ewz]

Thank you!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@wislypaul4671]

Very helpful video

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@fireresqlt]

Thanks great video

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@jackfntwist]

Hey. I have this exact same scenario, down to the paint. Lol. Except I only have 2 zones. Thanks for this explanation. The days are still confusing. I'm trying to find a "smart / wifi" controller that will replace this one and turn the pump on and off with an app. I think it's a 220V line. Can you recommend one inexpensive? The ones I see online seem to just be timers or something and can't figure out if they're for a hardwired electrical pump switch or not.

[@stevel.romero4754]

Awesome and clear video. You just saved me some money so thank you!!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@recetasdeliciosasyfacilesc1795]

Excelente video

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@JennaQuinter]

Mine are rusted so I can’t pull the little pieces out

[@wilsonlanza1]

Hello! Thanks for the great video. My irrigation controller is always ON, even if I flip the switch to off position, I have to keep the water valve off and manually come open the water myself on and off when I want to water the yard! Any tip advice will be appreciated.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@luisvillacis7759]

Dónde puedo encontrar un Video así pero en Español gracias

[@cristireyes8528]

Thanks so much. Our pin that advances the day is missing. Where do we get a replacement? Thanks.

[@paull.5921]

Hey cristi did you ever find it I need the same thing - tnx!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@wilsonline90]

helped e a lot!!!!!!!!!!!!!!! amazing vid. thanks

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@jorgepadilla392]

This is awesome, thank you very much I have to adjust my conroller, I should have bought the one with internet connection, the instructions in the box are not really helpful and probably and app is much more easier to use, out of curiosity, what was the brand of your favorite smart controller ?

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videosGlad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@nidiacastillo1901]

Am I supposed to turn the power off before removing pins?

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@larb1228]

You don't say whether to push day pin in or out to set for watering.

[@ronaldsoifer567]

This clip was fantastic. I’m sooo appreciative that I Found you. I’m In Deerfield Beach and have an AIR BB .Do you replace these with the smart? Please let me know. Thanks so much again. Ron

[@jefffriedman5660]

can you cancel a zone with the timer? one of my zones has a crack in the pipe near the pool equipment

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@DrewKap]

I have this same exact timer (no pump). Is there anyway to connect my rain sensor without hooking up a relay box? Or can I buy the one that says for pumped water since that has the rain sensor connections?

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@RyanClarkFisherII]

Anyone found where to purchase another one those large pins that changes that day? Can’t seem to find it anywhere online.

[@paull.5921]

Hey Ryan i need the same thing did you ever find it?

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@luisvillacis7759]

Dónde puedo encontrar un video así pero en Español

[@DC-pk5np]

Thank you very much 👍 You should have a link with one of these under your video, to your Amazon store. For example, I want one you are talking in the video about. The automatic one 😊 but I have to search now. Cause you don't have a link 😏

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@DC-pk5np]

@@markrogge3098 I can't. Your content is very specific. Your subscribers are professionals or people who are dealing with these issues every day. I am not the one. But I can help you by giving you customer feedback. You should create good-looking thumbnails for your videos. Hire someone who knows how to do it, and you will have more views and subscribers. Plus, search on Google for the problems that people are dealing with every day and create content based on that. Good luck to you.

[@ericksandoval2646]

MUCHAS GRACIAS Sr.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@erinmyles213]

Many thanks!!!

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@janetbarber7493]

Great instruction yet I need information on rain sensor connected to timer not working Also how to locate you in South Florida

[@robbythepan5796]

Is it possible to set it for evenings and early mornings?

[@markrogge3098]

Watch the video. Set the time of the day. Set thr time of watering. Yes.

[@markrogge3098]

Please subscribe

[@rickviola]

Why to you have the day pin at noon? The instructions say to put it at midnight, not 12 PM.

[@YaYaNope]

I’m wondering same thing. I remember my sprinkler tech said sometimes if you run your zones too close to the silver pin there could be issues. He set mine to noon. But I would like a clear explanation.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@andrewmorales7647]

I am a beginner on this how to do that the irrigation

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@superdoopercooper1962]

So watering begins around 2a.m. ?

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@AdventureClubFL]

Is it simple to switch from the Intermatic to a Rachio ?

[@markrogge3098]

Absolutely not. But it's Absolutely worth it. If your in broward callme

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@anthonyparada2896]

Hi Mark, If I have 1 zone. I would not need to put a space in between pins, correct? I could just put 2 pins side by side for 24 mins of watering?

[@markrogge3098]

Yup

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@hendricksanchez5776]

Saludos,muy buen video . Hermano me podrías mandar el esquema como se conecta al motor .

[@jaysallstar]

I noticed my time always changes on my timer by hours. Any recommendations as to why? Is it a wiring problem. The sprinkler guy said its power surges. I dont have them that often and if so its not for hours. Maybe seconds. And its off by 5-6 hours. I have to keep going in there to set the time.

[@markrogge3098]

Bad clock motor. Or the power is controlled by something else down the line... i.e. pool timer etc. Power surges wouldn't do that

[@jaysallstar]

mark rogge thanks for replying. It is a brand new one. And my pool timer is separated on the other side of the house. So its not wiring. Maybe I got a bad one?

[@markrogge3098]

@@jaysallstar I suppose either one is possible. If it was not professionally installed certainly. I really don't recommend this type of controller to anyone. The technology is 1950. If you wanted to get a smart controller it would give you an alert every time there was a power issue.

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos

[@dionnedadd8142]

thanks for your video. where can i get replacement pins?

[@markrogge3098]

Glad to help you... but please help me by subscribing to my channel. Once i have enough subscribers to monetize it I will start making a lot more videos