How to Set the T-Lock Servos | Traxxas TRX-4

[@toniwetzel4263]

How can i change the direction the servo is turning? My front servo is turning in the wrong direction. Is it possible with the transmitter?

[@MrYessireebob]

Already have most electronics readily available for a TRX-4 kit, please consider releasing one!

[@aaronchurchhill1508]

Ebay will probably have rollers up for sale soon.

[@MrYessireebob]

naphen I'm hoping like hell

[@m_atrix]

it was enough at the level of the apparatus settings to create the possibility of adjusting the operating range of the servo. I admit that after traxas I expected more

[@chepecho]

Hi, any info on how to turn the micro servo counterclockwise ?

[@christopherlessley6202]

MY FRONT DIFFS DONT UNLOCK STRAIT OUT THE BOX:(

[@OverRevvedRacing]

Mine burnt up because it started freaking out and buzzing in the "unlocked" position... Have to send it back with an RMA... Kind of sucks that i have to send it in, then wait for them to look at it before they send me a new one.

[@callmetoaster5980]

Mine did the same

[@sonorangaming449]

Will these fit on any other non- traxxas RC?

[@ryanwalker9472]

ive stripped like 4 of these

[@1elaijah]

They broke in 8 hours total use! Now what?

[@hondafreak8613]

On TRX-4 is it better to lock differentials while wheels are rolling, stationary? Same with 2 speed transmission. 2 speed made a loud snap first time I shifted it

[@askewentree233]

Probably cause you were giving it throttle while shifting

[@adnebijleveld61]

Is there a video for the trx-6?

[@insertnameherereee2802]

Working on a customer vehicle his controller, receiver fried and his diff lock in the front is backwards now with the new controller & receiver

[@lualrosaal]

Is it the same orientation for the TRX-6??

[@Mattt7940]

Thank you

[@ka4172]

The steering servo runs on mine TRX4 over the stops on the axel,i set up the servo to a small space.

[@3LD3VIL]

How you set the low high servo please

[@alcurrie7620]

Can i make the rear lock rather then the front locking first in the middle position of the switch?

[@dezervon8285]

Hey, you can do it by switching the servo plugs in the receiver. Default is front-channel 4, rear - channel 5.

[@GastonMaqueda]

Traxxas RC cars have a great quality. I'm so happy with my TRX4 But the electronics are terrible bad. For the price of the products needs to come with much better electronic I have my TRX4 for two month and I already repleace the steering servo (Broken after the third use), and now 2 weeks after, the front diff lock servo. Happy with the truck Very dissapointed with the electronics.

[@me-rn7jx]

ive had mine stock for a year now driving daily with 0 maintenance and zero broken parts i just know my shocks need oil those are dry 😂 but idk ive had no issues driving in any tempature

[@GastonMaqueda]

@@me-rn7jx Lucky you bro

[@JUMBOs-RC]

Mine is bad out of the box, front diff lock won't fully disengage

[@ThAsocialypseNow]

Mine also ... really bad solution.

[@christopherlessley6202]

Johnboy have you fixed front DIFFS not unlocking yet?

[@christopherlessley6202]

Johnboy I have figured it out!

[@dillonwhite9581]

Where do you get those horns?

[@CCBSRC]

hey how do I replace the reciver in my traxxas slash? is the one cord just the wire that goes through the attenna

[@TraxxasSupport]

Yes that is the only wire attached to the receiver. Unplug the other components like the ESC and servo and plug them into the new receiver. Stick the receiver down with double sided tape in the receiver box, and you may need to bind the transmitter and receiver. See our video on that topic and also how to properly seal the receiver box.

[@CCBSRC]

Traxxas Support do you have a video on it

[@TraxxasSupport]

No but there are instructions in the manual: traxxas.com/sites/default/files/58034-2-OM-N-EN-R00.pdf

[@scribby2667]

how to unreverse the tlock front servo

[@t.t.6398]

My receiver went bad replaced it but now my front diff is reversed and I can't figure out how to correct it! So frustrating! Gonna call Traxxas in tomorrow hopefully they can tell me how to fix this cause the instructions are useless. Blinking green light, WTF?

[@ethanhenry7553]

Terry Tiell me too

[@ethanhenry7553]

Terry Tiell just search how to reset your remote to factory default then it should be good

[@t.t.6398]

Ethan Henry Hey Ethan give Traxxas support a call, they walked me through step by step how to do it and it's all fixed now! Traxxas is great with the support! I wish I could help you more. Good luck and keep me updated! 😁👍

[@findleyjull]

Man I should have watch this video before I snapped it

[@justinbarnard7868]

Same with trx6

[@MarcoMayhem]

Is this the same for the trx6?

[@msdos32]

The front servo is the same, the rear isn’t. Because the rear is locking two cables at once, it has a different horn. You want both horns perpendicular on the TRX-6

[@ozzyg82]

1:39 that appears to be turning clockwise...?

[@tikkabrno]

It turned to the left. What do you mean?

[@JonR35]

Wished it was rear lock instead of front lock

[@timommering7645]

You can reverse the channels, this way rear locks first.

[@zanehaselden5573]

Mine just keep clicking after you engage the diffs. Even with a brand new servo. So done with this servo bs.

[@midavIV]

bad servos. For that kind of money you need to buy TX-4

[@hamiltonadventures8537]

Fucking junk dont buy one