How To Set Up An Audio Interface Using Bandlab

[@OfficialFrost_wrz]

How do I do this on a hp laptop

[@ChasingTheGoose]

Hey. Most steps should be the same…the difference will be setting the interface as your audio in and out. Find your settings and then go to sound settings and it should be there 👍

[@OfficialFrost_wrz]

@@ChasingTheGoose thank you

[@lordseventhmusic4073]

@@ChasingTheGooseI’ve been trying this. But there is a 99-150+ latency. How do I fix that????

[@ChasingTheGoose]

@@lordseventhmusic4073 in your headphones or after you’ve recorded?

[@lordseventhmusic4073]

@@ChasingTheGoose In my headphones, sorry for late response. But it’s very important for me to use monitoring while recording. So I was wondering is it BandLab that’s causing the delay?

[@CosasdeDios1089]

Hey, thanks for this clear and to-the-point video. I browsed through too many videos fattened with wordiness and fancy music and I continued to get confused as to what to buy to start my little home recording thing and BandLab. This worked. Thanks!

[@reemphillyable]

This deserves 1 million views

[@seglord1960]

Hi Ryan, thanks for your video, i just purchased my scarlet Focusrite interface and watching your video for setup

[@nbnfizick8575]

You just saved my night 💪🏽

[@callmeceed]

Best of all the interface setup videos

[@thunderbirdbrown3002]

Thank you so much ,mate!🤘😎 Finally a video with everything 1would need for the complete process!I'm so bloody grateful And happy!! GetchaPull-Cheers 🤘😈🥃🍻

[@DatBoyJames]

got yourself a like homie!!! much appreciated!!

[@KingRizo59]

Wow thanks a lot brother very very helpful 🙏

[@NkirukasWrld]

Hey, so my vocal recording has a clicking and I even turned off the meternome to see if that was the problem. I have a Shure SM 58 and the Presonus AudioBox

[@nadiacarolinariossarmiento2064]

I have the same problem when I used de bandlab with my scarlet solo 3 generation, all my records have a clicking, somebody can help me please?

[@ChasingTheGoose]

What kind of a clicking? Is it constant like a metronome or random? Is it only on loud sounds or all the time? If it's bandlab, how good is your internet? You might be better downloading Reaper or another DAW...

[@NkirukasWrld]

@@ChasingTheGoose I actually fixed it thank you!

[@jessicabowen7254]

I appreciate you so much for this! Thank you!!

[@ThaSouthMU]

Very informative. Thank you.

[@IamS4t4N]

A very helpful video 📹. Thanks bro

[@GalacticSpaceInvader369]

Thanks bro it really helped❤️❤️

[@stephenmcmahonmusic8275]

Top job cheers Ryan👌

[@nightcorefox5195]

Do you have to use an audio interface or does a simple phantom power supply work?

[@ChasingTheGoose]

Depends what you’re plugging in…if you’ve got a usb mic then you don’t need one

[@ChasingTheGoose]

Hey. Thanks for the comments. I'm afraid I'm not particularly active on this channel..I made these two videos for a specific project. It might be something I would consider doing more of in the future...nice one

[@zdenekflitar6041]

Heyy I would like to ask if I can plug a normal mixer instead of the focus rite? I dunno what cables to use and how to connect.. If u could help that would be quite nice

[@ChasingTheGoose]

@@zdenekflitar6041 Yes some mixers can function as interfaces too....it really depends what you have...your mixer would have something to come out to USB etc if it was capable...?

[@tylervision707maul]

mine says driver error on the USB .. brand new usb interface

[@ChasingTheGoose]

Thanks for answering the question @Zdenek. Really helpful. I try and get to all the comments but sometimes it takes me a while as I'm concentrating on other projects.

[@ChasingTheGoose]

@@tylervision707maul if you are on PC then it's possible you need to download the drivers. Just do a google search for it and it should be easy enough...and free!

[@verxxe]

What headphones is that at 1:55

[@ChasingTheGoose]

I forget now I'm afraid....it was for a specific project and they provided the headphones

[@exotichordz819]

@just another side hustle Hey I followed u all the way up until u said you were on a Mac and u had to make sure that it's set to focusrite Scarlett for the mic..u selected focusrite 2 times input and output..I am using a Samsung Galaxybook 2 pro 360 run by windows 11 I believe.how do I make sure my condenser mic is being utilized on my laptop?..I literally am so new to this and I just want to record my vocals thru import or making a beat in the bandlab studio. It's been a very frustrating go. That's why I'm using bandlab RN bc it's a lot more simple the pro DAWs. I'm going to try to switch to Ableton once I can make interface content with bandlab. Thank u

[@ChasingTheGoose]

Hey. Most steps should be the same…the difference will be setting the interface as your audio in and out. Find your settings and then go to sound settings and it should be there...you want to set your interface as the input and output!!

[@exotichordz819]

@@ChasingTheGoose thank you for getting back to me so quickly. You are honestly the first person on KZbin that has broken it down to me in a way that was simple and to the point.i know bandlab isn't a real daw but I gotta start somewhere..I've had the Scarlett 4i4 3rd generation for 6 months now and I've been working so hard to beable to create something with it..I was able to get my edifier speakers to run thru my Scarlett Wich I was happy about 😂😂...then I used bandlab to try to create any vocal recording with the Scarlett and i did it by mistake bc I couldn't figure it out again after that..I used the splitter tool that bandlab has now and imported a song of a band that inspired me and I was able to get the song into studio. I got shit from ppl on reddit for doing that but I don't give a fuck im learning this from scratch I have no recording experience and minimal computer experience. Because I have the Scarlet 4i4 3 gen I have to use the focusrite driver because my interface has no buttons on it except for the phantom power and that's also sort of giving me a bit of an issue because the driver is asking me what analogs do I want to set for which inputs for my interface. I'm only going to click air because I'm only using the microphone right now. Each little window on the driver has a little dropdown window that says use as one and two, play from DAW or custom and I don't know what is what.lot to unpack I know...when I record my vocals to the song with just the instrumentals playing, do I have to press record right away and then start singing or do I have to be record the instrumentals first then put my vocals to it?..sorry for all the lame questions

[@ChasingTheGoose]

@@exotichordz819 OK, so....on Focusrite Control you should see at the top of the page 'Input Settings and Output Routing'. Your input settings are where you control things you are plugging in. Here you can set whether your analogue inputs (xlr/jack etc) are line level or mic level. The output routing is setting where the audio comes back out. You probably just want to leave this how it is for now. As far as the absolute basics of recording (what order etc)...I have an unlisted video that might help you...it's talking about garageband but it will all still apply. 🙂 kzbin.info/www/bejne/eHeknJ1ueLChe6s

[@exotichordz819]

@@ChasingTheGoose I upgraded my speakers...had the unbalanced edifier speakers..I just ordered Sterling Audio MX5 Pair Powered Monitors.. That will be an upgrade I think..can use XLR port or the TRS cables..I'm not sure what the better choice would be though I guess I'll buy both just in case..also got an external CD DVD drive so that will be cool too.. I'll check out your video link thanks

[@ruthallen8391]

Enjoyed your video...very clear and concise. I have the Scarlett Solo and no midi keyboard...yet. I've set up my PC computer's audio input and output for the Solo, can hear you, and for example the Acoustic Guitars fine, BUT cannot hear any of its sub sounds (specific guitar sounds) when I click on them. I'd like to peruse through the different loops and packs offered, but for some reason, I can't hear them! Help & thank you!

[@ChasingTheGoose]

I'm not sure what you mean...are these loops that are in your DAW? Can you hear them if you drag them on to the timeline? And what program is it? If you found this video because you are on Bandlab I would highly recommend getting Reaper instead!

[@redsodred]

Goodnight brother. Firstly I want to say thanks for the detailed video, it's really helpful but I need to know why my mic stopped being picked up in Bandlab. I also don't see the levels raising at all when I hit record. I get no sound whatsoever when I recorded multiple tracks with this same mi, please help.🙏🙏🙏 I also notice that the interface is much different today than it was 3 years ago so I'm unable to follow these instructions 100% accurately.

[@ChasingTheGoose]

if you're not seeing any levels...that's a sign that the signal isnt getting that far...are you on mac or pc? in your sound settings (not in the DAW) check that the interface is selected as your input. On a mac thats in settings and then sound...

[@StoneD780]

I’m on a Chromebook, how can I get the sound settings

[@ChasingTheGoose]

I think the audio settings are somewhere near the volume control in the bottom corner 🙂

[@edub9930]

I'm using window's 11 and focusrite interface along w condenser mic. Checked sound under system configuration. Everything OK 👍 input, output etc yet when I go on bandlab the mic isn't picking up signal on bandlab. I have a feeling it may be bug issue because when I click on "input -> no device" I choose "device 1" (my only option) but still no signal from mic. Anyone else having same problem? *I usually use cakewalk by bandlab software btw & can record there. Just wanted to try bandlab app as well

[@ChasingTheGoose]

Ive heard good things about cakewalk but ive never used it. To be honest I normally try and persuade people away from Band Lab where possible ha ha

[@alxmaru]

The focusrite doesn’t show in my input options, i can only see audio device #1 but no sound comes out

[@ChasingTheGoose]

On what computer?

[@lincolnmarlboro3740]

Just a question: does it all come in that big black box, or do I have to buy all that separately?

[@ChasingTheGoose]

Yes this was for a specific project and they bought the flight cases separately 🙂

[@noraa_erayi]

but for my interface i have a small delay of what comes out

[@ChasingTheGoose]

While you are tracking or after you have recorded something? If it's while you are tracking some audio interfaces have 'direct monitoring'...if you can see that button press it. If you can't, just leave monitoring off and take a headphone off one ear. If it's after you have recorded, that kind of latency can be caused by buffering issues...it's trickier to fix, Bandlab has a built in 'latency test' which is meant to adjust for this but it's not available on all platforms...this is worth or try...or just get Reaper 😀kzbin.info/www/bejne/o6DPc2l-oNeWoqc

[@terrencebaker5194]

I’m using an iPad and scarlet interface to record my guitar but for some reason I believe the iPad mic is recording as well whenever I record so I’m getting all kinds of feedback back and outside noise .Any suggestions?

[@ChasingTheGoose]

Are you using headphones? Is there a chance that you have monitoring turned on? When you play can you hear it in the headphones speakers live? If so turn it off or plug headphones in…. Try it and let me know 🙃

[@marcosmusicstudio]

Thank you for your great video. You mentioned in the video that you can use the virtual instruments of bandlab, what about using your own sounds from the keyboard or external plugins, is that possible in bandlab? Thank you!

[@ChasingTheGoose]

You can't use external plugins but you could use the sounds from your keyboard by just plugging it in through the jack input on your interface.

[@marcosmusicstudio]

@@ChasingTheGoose thank you appreciate the quick answer very much!

[@milzhinrandom5839]

Hello. Is there still a squeeky sound in focusrite when using acoustic guitar?

[@ChasingTheGoose]

Are you plugging it straight in? Always use a mic on an acoustic

[@glojaylan8965]

Bruh thank you so much.

[@Californiagent]

awesome

[@ghulamqasim7361]

Nice demonstration I hve Q? If I set up my focusrite the way you demonstrated, after I record singing do I need put vocal effects from bandlab or recording as such is enough

[@ChasingTheGoose]

There is no right and wrong...if what you recorded sounds amazing raw then just leave it 😀

[@stitchmywoundz17]

For Dynamic microphones DO NOT USE PHANTOM POWER!!! youll break your mic by doing that!

[@Big_Iced]

Didn’t know that. Thanks 👍🏼

[@Rxckstarrrr]

what is phantom power?

[@StikZ]

for more power u can use one of those charging + usb ports

[@Clutchsupreme]

This is a lil to old but I have a problem with my mic it picks up On BANDLAB everything perfect but i keep getting like a muffle type sound that sounds very weird everytime i try to record it sounds so muffly in buggy but its perfect in i put the Input on the right one my mic is on its just a muffle problem thats it Hopefully you can help me🙏

[@ChasingTheGoose]

Does the mic sound like that in other applications? Do you have another DAW you could try it in? If the mic is working and getting signal it could just be the mic...

[@maxavierr]

So I got everything else set up, but my headphones aren't working. They are plugged into my interface but no matter what I try the audio always comes out of my MacBook. Help?

[@maxavierr]

How do I change the audio output on Macbook? Theres no options for it

[@ChasingTheGoose]

go in to your main settings on your computer...choose audio, output and select you interface from the list 😀

[@jah.montanna]

Hey so I got all my stuff connected in the focus right and my mic and MacBook but when I want to record it’s just making a robotic noise when I speak in the mic

[@ChasingTheGoose]

Could be a lot of things...dodgy lead, problem with the mic, just a glitch ...have you tried just restarting the program?

[@Twoklean]

Wassup Ryan I got audio technica and I’m currently using BandLab I been having trouble recording my voice when I do record it on BandLab the mic doesn’t pick up no signal

[@ChasingTheGoose]

Audio Technica interface? What's the mic? Does it need phantom power (48v)?

[@KoaztalYT]

is there any way to use an audio preset on pc as the input? example: using my “no noise, echo, muffle” sound preset on discord

[@ChasingTheGoose]

@@KoaztalYT I want to say yes…but I’m not sure what you mean 🙃

[@jatchuanosh]

My scarlet turns all lights on then off then only leaves air light on what does this mean

[@ChasingTheGoose]

Is everything working ok? Sounds like you've just got the 'air' button turned on.

[@aliwhiteel4808]

I know this video was a long time ago hopefully you can still help me if you're still checking your channel but I have an M-Audio interface trying to use bandlab it shows me that my interface is plugged in on bandlab but there's no audio coming out of it how do I fix that issue

[@ChasingTheGoose]

you're in luck 😀are you on mac or pc?

[@aliwhiteel4808]

@@ChasingTheGoose pc

[@ChasingTheGoose]

@@aliwhiteel4808 is the interface working, generally? If you play a video on yt for example...can you hear it in your headphones/speakers?

[@ChasingTheGoose]

i had the m audio 'fast track ultra' or something like that...when i last bought a new mac, it wouldn't recognise my interface anymore...i tried to find the drivers but they had stopped updating them so nothing i could do....it still works totally fine on my 2012 mac! Is yours an old M Audio?

[@aliwhiteel4808]

@@ChasingTheGoose I usually use Cakewalk by bandlab and my microphone works fine but every time I try to use just bandlab on the PC it never picks up the mic the icon used to be there but now it's not even there at all

[@dwiputranto81]

Sorry, just wanna make sure. So you can use the Scarlett directly on your Mac PC and connect with the Bandlab without installing any Scarlett driver?

[@ChasingTheGoose]

The sign up is for your warranty and the extra software...I didn't have to install any drivers.

[@ghulamqasim7361]

2nd Q? I sing on harmonium box and harmonium sound gets recorded along with vocals and can not be spilted. If I put reverb or echo, harmonium sound is roaring, so how I put effects on solo vocals Please reply

[@ChasingTheGoose]

The only way to get total separation is to record them separately...if you recorded it down one mic then there's not a lot you can do...you could try eqing the reverb if they're on separate channels and it's just bleed that's the issue?

[@officialwhiteboyswag103]

Hello if you see this I hooked up my M audio box to BandLab with my brand new mic and I don’t know why the mic’s not going through BandLab if anybody can help out thank you

[@ChasingTheGoose]

Did you get it working? Have you selected the M audio box as your input and output in your sound settings? Does the interface require drivers that you need to download?

[@rajnaidu5521]

Hi,,I've got a Allen n Heath Zed 16Fx mixer. It came with the Cakewalk bundle. But I can't seem to get to work it.Its USB, connection type. Do I have to use Audio interface,,,?. Somebody help,,,coz I can't get in the sound input to the DAW from the keys/guitars etc etc.

[@ChasingTheGoose]

Sorry for the slow response. Did you get it working?

[@Damian310875]

Hey man and thanks for your video! I've some problems with my acoustic guitar using Bandlab. I use a behringer umc404hd and a PC but when i register the guitar the volume is too low and some rumors disturb the sound. what could be the problem? Thanks!

[@ChasingTheGoose]

Hey man. Are you plugging your guitar in directly? You will normally get better results putting a half decent mic in front of an acoustic guitar although it is possible to plug straight in. You should make sure to select 'instrument' on the front of your interface...check the pad button isn't on....then you should be able to control volume with the gain knob. Also make sure your guitar volume is up full and you have a battery in your pickup. Hope that helps?

[@chrismichael1984]

Do I plug the headphones into the audio interface or my computer to be able to hear previous tracks (like drums) while recording a new track (like guitar)?

[@ChasingTheGoose]

You can do either...it depends where you are sending audio out to in your settings... I would recommend using your interface as the input and output device then you can plug your cans or speakers in to the interface...sorry for the slow response...I'm lost in Pokemon at the minute

[@drdrummer87]

I'm having the same issue I can record guitar but can't hear drums I've recorded so I can't play along with it with my gweetar ! So all I need to do is plug headphones onto the interface and I'll hear the drums to play along to yea ??

[@chrismichael1984]

@@drdrummer87 When I switched to GarageBand on iPad all the issues I kept having with Bandlab went away. Also, when I tried Bandlab on iPad/Apple it worked 100x better than it does on PC

[@JSee]

The mocrophone is not working bro It wont let me change the device of the input. please could really help me ive been trying to make it work all night ive got a PC

[@ChasingTheGoose]

Did you get it working?

[@JSee]

@@ChasingTheGoose yeah bro I got it sorted, I have no idea what the fuck.this KZbinr is talking about or doing matter of a fact. This man is talking nonsense lol what Audio Interface do you have? I can direct you with it

[@gemcloudd7087]

@@JSee you’re replying to that KZbinr

[@sjjz1880]

@@gemcloudd7087funniest interaction I’ve seen all month.

[@Kdotjr666]

@@gemcloudd7087he’s dumb asf lol

[@suprhero1]

how about the Delay? how do i fix that?

[@ChasingTheGoose]

Do you mean latency in your headphones. That depends on your DAW and setup but what I normally do is leaving monitoring off and just have my headphone off one ear when tracking.

[@jacobkonradsen8255]

Hi. I have a pc and my pc is aware that the interface is plugged in. Ive even recorded some stuff some days ago but today on bandlab it just says no device. I dont understand anything.

[@ChasingTheGoose]

In your sound settings (thinks it's bottom right hand corner?) what are your inputs and outputs set to? In your computer settings, not in Bandlab 🙃

[@IamS4t4N]

What do you do when you press record but it doesn't save the recording and so it won't playback ?

[@ChasingTheGoose]

Hi. Are you seeing the audio record in...as in, are you seeing it create a block in the timeline with a waveform in it?

[@IamS4t4N]

@@ChasingTheGoose yes it shows it recording. The source is picking up but after I record my part the track that I just recorded disappears. I'm wasting a lot of time in the studio.

[@parkersimpson9308]

i have the focusrite scarlett solo and a rode nt1a, daw is bandlab, but after doing everything the website said and everything youtube tutorials have said i still cant get any sound picked up by the mic, theres no indication of sound on the scarlett or in bandlab and its lowkey annoying me, any help?

[@ChasingTheGoose]

After you have set it all up in bandlab and created a voice/instrument track....at the bottom left of the screen do you have your interface selected as the input? If it's still not working...try downloading reaper (it's free) and see if it works in there...good luck

[@parkersimpson9308]

@@ChasingTheGoose on it just now, thank youu

[@dozedaze]

Hi, I just got BandLab on my mac along with the focusrite and I don’t know how to use it. I tried setting up my focusrite to BandLab but it’s not connecting. I did the input and output like you said. Can you help me out?

[@dozedaze]

I have a video to show you.

[@ChasingTheGoose]

Did you get it working yet? My first piece of advice I give anyone who watched this video is....download Reaper instead. Bandlab is fairly rubbish and unless it's for school or solely for the collaboration options (not even worth it for that though really) I would get a different program. Reaper is a great place to start. Let me know if you can't get it working on Reaper. Nice one

[@XyzyX154]

Bro when i want to record using 2i2 my recording is cracky, what should i do?

[@jameshet8309]

But the electric guitar with the effects from the program ? Ps : I tried one time and I musted use direct monitor to hear the effects but its sounds with much latency and by the way, what latency is the best for this program ?

[@ChasingTheGoose]

To avoid latency when recording...a quick and easy fix is to only have one headphone on and monitor yourself in the room...then you don't have to worry about latency at all...just turn monitoring off

[@PsychoNatural]

For some reason when I plsy it back I have no pan on but it only plays back my voice in the right side of the headphones.

[@ChasingTheGoose]

All the time? Or just your voice? I might need more details to be able to help. Tell me a bit more about it

[@Pinoystory311]

Can you use guitar effects there?

[@ChasingTheGoose]

Where, sorry?

[@1eporis]

Im using a pc and a at2020 mic and when i record vocals my focusrite solo picks up audio on the instrument track causing feedback. How do i fix that. SOS

[@ChasingTheGoose]

Hey. I don’t quite know what you’re saying…if you have the solo then there isn’t another track that could be picking anything up…it’s only got one channel. After you have recorded your instrument make sure that track is no longer ‘armed’ to record…hope that helps?

[@jakerattle95]

Can it be hooked to a phone that supports bandlab?

[@ChasingTheGoose]

You mean the interface? I’m not sure about that particular model but you can get an interface for your phone!

[@jakerattle95]

@@ChasingTheGoose ok awesome

[@haroldlongakit6477]

Hey man, any idea why I can't hear any sound from my earphones that I connected to my interface?

[@ChasingTheGoose]

Hey man. What setup are you using mac/pc, what interface etc? Are you getting sound from speakers that are plugged in to the same interface?

[@quinixs2725]

@@ChasingTheGoose I have the same problem I have windows a laptop

[@sixtomerlos4129]

Maybe you need to go yo settings and click on "monitoring" Also my wanna make sure that the preference on your computer are selected to go through your interface

[@meatdtb8390]

I have the same problem and with a Mac also I turn on the 48v it buzzes and I can only hear myself and not the song off BandLab

[@Hipurchase]

Ok so it’s picking up the mic audio but it’s extremely low I tryed turning up everything

[@ChasingTheGoose]

Is it a condenser mic? If so it will need phantom power...can you see a button on your interface anywhere marked +48?

[@lorenzokersey187]

Hi Ryan,I just downloaded the software, I have a hard time hearing any sound from my head phone p/s ( MacBook Pro) thk you

[@michaelshipley8878]

When i allow my mic on bandlab website it muffles playback can someone help with this

[@ChasingTheGoose]

@@michaelshipley8878 it changes the sound of things you had already recorded? Or the mic sounds fuzzy?

[@michaelshipley8878]

@@ChasingTheGooseyea the stuff i already recorded sounds muffled i cant even hear the beat

[@ChasingTheGoose]

@ is it the same speakers with both set ups (computer audio and interface)? Does it sound muffled if you plug headphones in? 🙂

[@noti2723]

Hey man if there is a way we can contact so u can show me how to use this band lab on this HP laptop that would be dope lmk please

[@ChasingTheGoose]

I'm not currently offering this but it's something I would consider

[@lorenzokersey187]

I like to see more videos because I have the same software thk you

[@TrulyMikoyOfficial]

Hey man, I am planning to make a full cover of a love song. What fx of the recording should be used?

[@tylervision707maul]

brand new usb interface... just plugged in.. it reads driver error... on the spot where you describe 7:42 minutes into the video... now what? oh my

[@ChasingTheGoose]

Did you fix this in the end? Sounds like your interface needs a driver..should be easy enough to download...unless it isn't

[@needforspeid1861]

How do I get rid of the delay on the audio after recording

[@ChasingTheGoose]

That means it was latent when you were recording...the only real fix for that after you've recorded is to manually drag it back

[@korruptnovellst4751]

Do you how i can fix latency issues? Theres a lag on mine

[@ChasingTheGoose]

What's your setup?

[@korruptnovellst4751]

@@ChasingTheGoose a laptop. Scarlet 212. Condenser mic. And bandlab

[@ChasingTheGoose]

@@korruptnovellst4751 I would highly recommend Reaper....much more useable platform than Bandlab and you should get far less latency issues 🙂

[@ChasingTheGoose]

@@korruptnovellst4751 kzbin.info/www/bejne/o6DPc2l-oNeWoqc

[@brandonsulak]

I have a Scarlett Gen 2 interface and when I set it up for Cakewalk, it shows up and allows me to select it, but no sound and program crashes. When using the Bandlab website studio, as shown in the video for the guitar recording, I am not able to select my interface for the input setting. Even though the option for my interface is there, I cant select it. It keeps switching back to "No Device". I do not know how to fix this issue.

[@ChasingTheGoose]

If I were you I would try Reaper...this video was made for a specific project where they had to use Bandlab but it's not the program I would recommend...try Reaper and let me know if you have the same issue

[@brandonsulak]

@@ChasingTheGoose i ended up using Reaper and I got everything to work. Only issue with Reaper when using my interface for my guitar is, i get a static noise coming from my interface. I don't know how to get rid of it completely when using my plug-ins. It's on the master track.

[@ChasingTheGoose]

@@brandonsulak I'm glad that worked...a noisy guitar could mean so many things...you could try micing it up in an amp if it's noisy when it's plugged in to the interface....you might just need to try a different lead.

[@ChasingTheGoose]

Wow…so many comments I haven’t responded to. Sorry about that.

[@Jayammo]

It won't record my vocan and guitar separately it all just goes into one track only both vocal an guitar

[@ChasingTheGoose]

Not sure what your setup is to know what your problem is here…are you plugging two mics in to two separate channels, arming both tracks to record and setting the input for each track?

[@Jayammo]

@ChasingTheGoose i figure it out had to enable multi track recording

[@xboxsolox]

Do you need to turn on phantom power for guitar/instruments?

[@ChasingTheGoose]

No but there is normally a button to specify that your are plugging in a line signal....normally marked 'instrument'

[@dreskifrmdag7842]

my mic sounds muffled a bit how do i fix that?

[@ChasingTheGoose]

Did you fix this? Make sure you’re singing in to the front of the mic (sounds obvious but it’s a condenser and you are in cardioid it’s worth checking….does it need phantom power (48v)?

[@fbmusic7647]

Need help asap. When I do this on my hp laptop within bandlab it doesn’t want let me use my device (audient id4) i have to choose between analogue 1/2 and loop-back 1/2 I dont even know which one and when I click it says again no device. Please help

[@ChasingTheGoose]

where are you having to make this choice? in BL or in your audio settings on your PC?

[@fbmusic7647]

@@ChasingTheGoose both actually The audient device shows that it pic up sound. But when I test it in control panel it doesn’t pick up any sound

[@ChasingTheGoose]

@@fbmusic7647 maybe you need the drivers for your device…Google the name of your interface followed by the word driver and see what you find…

[@fbmusic7647]

@@ChasingTheGoose thankyou sir

[@fbmusic7647]

@@ChasingTheGoose i have changed my laptop and now its working. One last thing. When I record and playback my voice is totally of beat, how can I fix that in bandlab

[@ripant3165]

hi i have the first gen and for some reason i can’t hear out of my mic can you please help me

[@ChasingTheGoose]

Hi there. the 1st gen of what, the scarlett? and what do you have plugged in to it? headphones or speakers?

[@drdrummer87]

@@ChasingTheGoose hi I can record guitar but can't hear my drums to play along with do I plug headphones into the interface to hear my drums to play along to ?? I've tried plugging headphones into laptop to hear the drums but can't hear anything

[@marakii2x]

where can i get the white piece

[@ChasingTheGoose]

www.johnlewis.com/apple-mj1m2zm-a-usb-c-to-usb-adaptor/p1973248?sku=234418518&s_ppc=2dx92700055386115156&tmad=c&tmcampid=2&gclid=Cj0KCQiAv6yCBhCLARIsABqJTjZ8l4xySrSaHAFR5kL2_7CZGt5oID5wxEp0bgUeIoV53_kY9-t31hAaAqJsEALw_wcB&gclsrc=aw.ds

[@lyneicehaynes4922]

I only doing Acapella Without The Music from BandLab because I love singing.

[@dababyletsgooo6949]

Does this also work for a HP windows computer

[@dababyletsgooo6949]

Laptop*

[@ChasingTheGoose]

@@dababyletsgooo6949 Yes it should work fine on windows

[@louisedwards1826]

Hi mate, for a hp laptop how do you get on to system preferences?

[@ChasingTheGoose]

For PC it will just be in your settings under audio I imagine...id you find it?

[@edub9930]

System Configuration for window's 🪟

[@upchurchsmusicradio6784]

Can you use just plug your mic 🎤 to the laptop without the interface. I kept getting a lot so clear sound

[@ChasingTheGoose]

Only if you have a USB mic...these are available but the quality won't be as high as if you use a mic and interface.

[@keylowboyz2132]

I still can’t get my recordings to record i followed the steps too by the way i am using Scarlett solo 2

[@ChasingTheGoose]

What's not working?

[@keylowboyz2132]

@@ChasingTheGoose it says my audio is not working

[@keylowboyz2132]

@@ChasingTheGoose knowing i followed all the steps

[@ChasingTheGoose]

@@keylowboyz2132 the error message doesn’t say ‘your audio is not working’…what does it actually say? If you’ve got no sound are we talking about on the way in or out? Or both? Check the audio settings on your computer and also check the settings in your DAW…you need to pick the interface as the way in…the way out depends where you are trying to hear it…headphones/speakers etc

[@sixtomerlos4129]

So my question is: How do I split the channels? Like can I get the bass to come through one channel and piano on another channel

[@ChasingTheGoose]

Do you mean to record or when you are playing it back? If you are recording and have the two instruments plugged in the two inputs on the interface....you just need to set up two tracks in your DAW and choose to record input one for the guitar and input 2 for the piano...if you are talking about after you have recorded it you can pan sounds left to right to be able to place them in different speakers...hope that helps?

[@Mylesssss-zb1te]

I’m having trouble with the headphone? Can’t connect them or hear anything

[@ChasingTheGoose]

@Mylesssss-zb1te do you have speakers connected? Is the sound coming out of them? If yes, should just be a case of plugging them in and turning them up. If no, have you selected your audio interface in your settings?

[@keepdreamingyk8035]

Can I do it on phone with my Scarlett?

[@ChasingTheGoose]

i don't think so....

[@ramishahmed1860]

Yeooo I got a apple laptop that doesn’t have that fat USB plug in what do I do it’s like it has the new Samsung gen insert charger holes on it

[@ChasingTheGoose]

You need one of those adapters I show in the video. Thunderbolt/USB-C to USB converter

[@jameshet8309]

But the electric guitar with the same soundboard ?? Becauase here at me it doesnt work at all !!

[@ChasingTheGoose]

To record electric your best option is to amp it up and put a mic in front of the amp...unless you have some amazing plugins like Universal Audio that can get good sounds in the box

[@jameshet8309]

@@ChasingTheGoose And that plugin I'll put into the program or how ? And another think... after I record my voice, its hear with spatter and I really dont know why so, what I can do to hear her clear ?

[@ChasingTheGoose]

@@jameshet8309 Very hard to know without seeing for myself...tell me your whole setup and i'll see if I can work it out...what computer/interface/how its connected etc

[@jameshet8309]

@@ChasingTheGoose Well, the computer has procesor intel (R) core(TM), i3 3220 CPU, 3.30 Ghz 3.30 Ghz, RAM 4 GB (3.90 GB usable), 64 bits...soundboard focusrite scarlet 2i2...2 gen...and the interface is connected to the computer and I use and dinamic shure beta 58 A for recording vocal, and who is connected at this soundboard, but in cubase i havent this problem so, why I have it here, cos I cannot understand ???

[@floridaboycelo233]

What to do when my mic isn’t syncing into BandLab with the focusrite

[@sorrowfulsinner6655]

Did you ever figure this out?

[@sorrowfulsinner6655]

It was working for me but now it says no device

[@urbeastboy424]

@@sorrowfulsinner6655 did u ever figure this out?

[@keengkoong]

Hey dude can you help me out, im trying to setup my ai with my android phone

[@ChasingTheGoose]

Did you fix this in the end? I know they have endless problems with the android version

[@endayehusolomon7633]

Cool man

[@Kingkaidozw2]

how do i fix the delay

[@ChasingTheGoose]

If you are talking about latency then it depends what program you are using....in some programs like Ableton you can change the buffer to lower the latency but I doubt you can in Band Lab....to be honest I rarely use monitoring and just leave one headphone off to hear myself in the room

[@AjivJabar]

I cannot get it to recognize my stupid fucking mic in bandlab or fl i have a condenser mic phantom powered but it wont show audio levels in bandlab i installed drivers and everything im tryna make an ep so im extremely frustrated because I need to finish this ep but i cant record any vocals because it wont use the mic as input

[@ChasingTheGoose]

what's your interface?

[@blessingebruphiyo4082]

Same things here

[@blessingebruphiyo4082]

Mm using ​scarlet 816

[@ChasingTheGoose]

@@blessingebruphiyo4082 just download Reaper and sack BL off 🙂

[@IMSOREALL]

Spirit mic best in industry after Neumann maybe better because the switches

[@brenttonI]

Thanks

[@lowlikeyou]

This video was very useful, but the way you wear your hat pisses me off

[@ChasingTheGoose]

sorry...oh wait, no i'm not

[@kinglebricks5833]

13 mins for 5 mins of content.

[@ChasingTheGoose]

You can always speed it up

[@handsome_man69]

handsome man

[@jadenewton6222]

Hey i tried connecting my audio interface called mackie onyx producer 2-2 but after i connected the jack to jack from my guitar to the interface there is no signal picking up in bandlab.. but there is a signal picking up directly to the audio interface... What do i do.. genuinely confused

[@ChasingTheGoose]

in the audio settings on your computer have you selected the onyx as the input? kzbin.info/www/bejne/nJ7KqppqepuAZpYsi=DiRSzg8BUh6ZxXS_&t=423

[@heartthrobvin]

How I fix the delay in my vocals when I hear it as am recording?

[@ChasingTheGoose]

on the front of your interface change the monitoring option to 'direct monitoring'...it's sometimes represented as a small circle and then a double circle (on a two channel interface)...that should help. another option is not monitor at all and just leave one headphone off. Hope that helps