How to Set Up and Program an LCD on the Arduino

[@aaronharis2008]

Finally after several tutorials, I got my LCD working! Thank for your simple and informative explanation. Great video.

[@lurkingcorsa10]

what's value of ur trimpot and resistor .bro?

[@evergreenworldtrailer]

Super Awesome! I hardly will comment on here. This Guru made it simple as ever. Giving the PINS numerical values of 1-16 made it Easiest for any newbie! In 6 mins All Understood! I had to share this video with my STEM students! Great Work! Namaste!

[@Azizlol9]

I have to admit i was struggling with this on my senior project, thank you for this helpful tutorial. :)

[@Skull-dh8co]

thank you bro bcoz of u I got 7th rank in my school project

[@daselectronic9759]

अतिशय मनोरंजक आणि उपयुक्त ट्यूटोरियल

[@CircuitCreator]

PIN 1 》GROUND PIN 2 》POSITIVE PIN 3 》10K POT PIN 4 》A12 PIN 5 》GROUND PIN 6 》A11 PIN 11 》A5 PIN 12 》A4 PIN 13 》A3 PIN 14 》A2 PIN 15 》220 Ω PIN 16 》GROUND

[@marvellmontoya]

I made mine say Hello!, with your tutorial!! Thank you so much!!

[@shinobipanda2331]

Thanks so much! for years I've wanted a working LCD screen! thank you for helping me with this video! many thanks! I've also found a way to put different text on the screen, look at the code, it will say ("Hello World") then just change the text. like so here ---> ("Your text here") then whatever you put in the code it will say! just a quick tip. thank you! 👍 😀

[@tirumalacharikummaripalli5709]

This is became very simple by your explanation

[@progyansaikia4610]

I was struggling with this from a very long time, finally did it , Thank you

[@maxc500]

Thank you so much I finally got my lcd working!!

[@no.va981]

Thank you Sir, Finally seeing this video and trying to do the experiment it worked😊

[@MadMackz]

Thanks for this bro, I hope it works, you made it really clear and easy bto understand. I apprec iate it bro.

[@sbslightingsolutions6888]

very nice tutorial, real helped a lot 😄😄😄😄😄😄😄😄😄

[@CreativeStuff]

Thnx

[@thianesh9097]

If incase anybody didn't have a potentiometer connect that pin to GND not 5V it will work good..

[@PecanWoodPaper]

Thanks a lot Thianesh INDIAN AERO! I do have a potentiometer but your suggestion to move my pin to ground worked regardless. My screen was blank at first, but I replaced one of the 5 volt connections to my potentiometer with a ground connection and it displays "hello, world!" now. It has a blinking text cursor, although the text doesn't blink. Not sure if it's 100% working right now, but a huge improvement.

[@outfit7mass]

which pin?

[@RamaKrishna-hl7rd]

We have to include library or not. If we have to use means which library we have to use

[@RamaKrishna-hl7rd]

Or not

[@alimahamud9]

can you plz help bro. I followed all your instruction to connect everything but my lcd is not displaying any character on the screen

[@CreativeStuff]

Rotate the potentiometer knob

[@alimahamud9]

Creative Stuff How do you do that? I’m even trying to adjust the brightness on the screen but it’s not working

[@snappyceiling1003]

@@alimahamud9 Sam's here:(

[@snappyceiling1003]

@@CreativeStuff it's not working

[@sangeetawadhwani5515]

wow, so nice video, keep it up!!

[@rathikaliappan7999]

Clearly explained. Neat quick and simple... hats off to you...

[@AyushW3172]

@Rathi Kaliappan yes 👍🏻

[@meawmeaw1959]

Thanks al lottttttt brother. You saved my project 🤩🤩🤩🤩🤩🤩🤩🤩🤩👍👍👍👍👍👍

[@nurulnazifahnajwa7283]

Thankyouuuuu sooo muchh !! you helped me a lot !

[@sgayle]

can you use this for timer ?

[@ssemwangalawrence1487]

how can i connect it together with fingerprint sensor module such that the LCD can display sensor records

[@raghavsharma31310]

what does pins 5,4,3,2 do on arduino when connected with lcd

[@Misc_useful]

This is exactly what i wanted... NIce one bro

[@13mayank]

my lcd panel is only glowing in green light and I am not able to even see any blocks inside the lcd..after uploading the code , nothing is being changed on the lcd .. can someone help me?

[@burairhaidarj.inayatullah1660]

Did you find out why?

[@sandipchatre676]

It is good project i made it it works but the coding my freind so i had a question that how much text we can type which will display on the lcd screen

[@استغفرالله-م7ه7ط]

شكرا لك يا اخى ❤❤ استمر

[@manojbhagat2040]

Thanks, very well explained

[@Rassy_]

What do you call the pins that you soldered on the LCD display?

[@CreativeStuff]

Male Header pins

[@maheshnelarapu5995]

technoelectronics44.blogspot.com/2020/08/16x2-lcd-display.html you will get code file it will guide you

[@bidhirudiscovery]

Thank you it was of great help in learning the LCD connections

[@azym_equinox]

Can I do without soldering

[@aravindeswar4089]

Good explanation 👍🏻

[@belikebhai]

make a video on Arduino nano programming for R2S15902FP 6CH Volume control

[@a.santhoshkumar9473]

shall we use the 5k potentiometer instead of 10k

[@maheshnelarapu5995]

kk no prblm technoelectronics44.blogspot.com/2020/08/16x2-lcd-display.html you will get code file it will guide you

[@Starmoon_888]

my arduino turns off if I connect 5V and ground to my breadboard. what should i do?

[@shashwatpratap]

check for short circuits,for context dont connect t both pins to the same line

[@primevigilante7259]

how to determine which side of breadboard for positive and negative connection?

[@macyo2573]

Its your choice, you can even do it in vertical lines as well where the led has been connected, check a tutorial on "current flow in breadboard" and you'll understand

[@talabattulanagasaikamesh6846]

How can we get date and time on LCD display

[@srinivasaprasanth]

Thank u but display is not visible to me even after changing potentiometer knob why??

[@maheshnelarapu5995]

technoelectronics44.blogspot.com/2020/08/16x2-lcd-display.html you will get code file it will guide you

[@colman.sstephen1694]

Check your soldering. It might be shorted.

[@tomadhar5514]

Please give the code in Description( Copy and peste)

[@sittieayeesahamerol649]

Does this work on all kinds of LCD?

[@CreativeStuff]

No

[@CreativeStuff]

It will work with other type LCDs with some change in code according to the LCD module

[@FrostyG87]

Good tut 👍👍

[@pritisonar2568]

Sir I have connected the pins but lcd Is not printing anything. I am using arduino nano.

[@CreativeStuff]

Rotate the potentiometer knob

[@maheshnelarapu5995]

technoelectronics44.blogspot.com/2020/08/16x2-lcd-display.html you will get code file it will guide you

[@pritisonar2568]

Thanku very much sir

[@minravex9919]

If u are less busy....I need lcd display for project........a speaker.....so I need to display the following Name of speaker Model Battery level Charging indicator

[@JemappelleGigiBuffon]

Why my arduino board going in protection?

[@jahidhassan9329]

mine still not working. Help me please

[@maheshnelarapu5995]

technoelectronics44.blogspot.com/2020/08/16x2-lcd-display.html you will get code file it will guide you contc me

[@Hitman_2111]

Please make footstep power generation system

[@Ecoedventures23]

where do you go to code??????????????????????

[@michaeldeguzman5571]

my lcd doesnt show "hello world"

[@ArduinoExperiment]

Nice tutorial ✌☺ ❤❤❤❤

[@DigiBlendz]

I'm getting errors when I uploaded code

[@pradeep6736]

thank you so much

[@srinivasaprasanth]

Thanks bro but what if we have given 3.3V instead of 5V

[@anitajha4215]

That should be fine or else if ur lcd uses more than 3v then you'll need relay switch to power your LCD from external power supply

[@ranimotwani2401]

It did not work

[@theshirehighlander7292]

Thank you man

[@Sachinsharky]

My lcd is showing nothing why is it so please reply me

[@PecanWoodPaper]

I replaced one of my 5v pins to my potentiometer with a ground pin. The LCD screen displays "hello, world!" now. it doesn't blink though, so no promises your project will be perfect if you try what I tried. Good luck!

[@Sachinsharky]

@@PecanWoodPaper thanks buddy

[@DanialADHOfficial]

mine is diplaying solid block.. not word

[@CreativeStuff]

Rotate the pot knob

[@DanialADHOfficial]

@@CreativeStuff same it just blocky stuff on 1st line.. idk what happened

[@sammy7448]

@@DanialADHOfficial if your remember, could you tell what worked for you?

[@DanialADHOfficial]

@@sammy7448 i buy the new one.. maybe mine is faulty board unit

[@someshwari1]

Bro mine is not working

[@Daggersofdemon]

NOTHING HAPPENING JUST LCD TURNING ON NO TEXTS ON SCREEN

[@CreativeStuff]

Rotate the potentiometer knob

[@abong-b4p]

​@@CreativeStufftried this but still no words displayed

[@ahmedsaeed8751]

Same problem here

[@Your_localAndrew]

I'm a young arduino programmer i have been there you need to check the serial clock and the serial data is connected right and also if it doesn't work your arduino serial port might be malfunctioning if it says done uploading you need to check for loose connections or worn out pins

[@vivekims97]

sir, where to connect pin 5

[@CreativeStuff]

Gnd

[@ashokpandys9676]

Connect Pin 5 To Negative rail

[@dhruba2063]

please give the code here.

[@minravex9919]

Hello buddy

[@minravex9919]

Please can we partner for a project

[@SbeveAmogus]

This lcd module is straight up horrible. My phone has fewer wires than this. The video is good tho, thank you

[@naserjnealhouti5289]

I love you!

[@asilvaanil]

nice

[@tresabritto5684]

Please give the code

[@eva6287]

This is make bu Arduino Uno r3 damage

[@maheshnelarapu5995]

technoelectronics44.blogspot.com/2020/08/16x2-lcd-display.html you will get code file it will guide you

[@randomguyplayingminecraft3671]

i am getting errors thanks

[@tirumalacharikummaripalli5709]

🎉

[@class9supw2023]

Bhupendra jogi

[@ranimotwani2401]

I tried many times

[@rahulsrivastava1129]

Code😅

[@wasanthawimaladharm]

code???

[@CreativeStuff]

Watch the full video,you will find the code

[@maheshnelarapu5995]

down load here ..scroll down the post technoelectronics44.blogspot.com/2020/08/16x2-lcd-display.html you will get code file it will guide you

[@nasimahamed5758]

bro why are you using such kind of irritating music...?

[@randomguyplayingminecraft3671]

:(

[@GWorxOz]

Undecipherable gibberish.

[@1234gulder]

Thank you so much

[@Rana_Dastgir007]

Code??

[@CreativeStuff]

In the arduino library