How To Set Up Rockville ROCKFORCE W2 192 Channel Wireless 2.4Ghz DMX Lighting Controller

Rockville:
www.rockvillea...
Amazon:
www.amazon.com...
eBay:
www.ebay.com/i...
AudioSavings:
www.audiosavin...
Walmart:
www.walmart.co...
Includes:
Lighting Controller
Power Cable
Wireless Transmitter Antenna
Manual and Warranty Card
Features:
Rockville ROCKFORCE W2 192 Channel Light/Fog DMX Lighting Controller With Built In Wireless DMX Transmitter
Built in wireless DMX transmitter and antenna
Model DMX-WRE receiver available in our store is a DMX receiver compatible with this
This is also compatible with all of our wireless DMX lights
12 Scanners of 16 channels each
23 Banks of 8 programmable scenes
192 DMX channels of control
6 Programmable chases of 184 scenes
8 Sliders for manual control of channels
Automatic mode program controlled by speed and fade time sliders Fade time /speed
Blackout master button
Reversible DMX channels allows fixture to react opposite to others in a chase
Manual override allows you to grab any fixture on the fly
Built-in microphone for music triggering
DMX polarity selector
Power failure memory
4-bit LED display
Power Supply: 110-240Vac, 50-60Hz (DC9V-12V)
Electric Current: No less than 300mA
Power Consumption: 10W
Control Signal: DMX512
Control Channels: 192CH
Product Dimensions (L x W x H): 19" x 5.24" x 2.76" inches
Product Weight: 3.75 lbs
Wireless DMX Features:
Daisy-chain multiple lights using master/slave mode and use one receiver to control all of the connected lights. This setup requires one receiver or if your light has the receiver built in it requires nothing else additional
Each light can have a receiver built in (or use our DMX-WRE on each light) and each light will have its own channels on the controller so they can all be controlled independently (this can be done with up to 7 lights/groups)
Makes it easy to set up all of your lights without a mess of wires!
Controls work without any delay. These are extremely reliable
The product uses the 2.4GHz frequency band
Efficient GFSK modulation with 126 channel high-speed frequency hopping (FHSS). Hops 1100 times per second for interference-free operation
3-color LED displays status and parameters
One-touch operation
7 selectable groups of lights can be controlled independently
Connect up to 25 receivers
Requires you to hold the button to change linking - this prevents accidental un-linking
System Information - CPU: 32-bitARM Core
Distance: 1968 feet (600 meters)
Modulation: GFSK maximum transmit power: 23 dBm
Receiver Sensitivity: -94 dBm

[@YungBuscemi]

Thanks for making this tutorial. Unfortunately, every time I connect a par wedge 54w wirelessly it just keeps blinking randomly. And I get no color control, etc. Would that indicate that my W2 DMX controller is defective? I tested all 12 par wedge lights and they all worked properly on all other modes except when connected to the W2 DMX controller. Any tips, help, etc is greatly appreciated.

[@RockvilleAudio]

Hey! sounds like it could potentially be working incorrectly - have you reached out to technical support?