Рет қаралды 2,478
The Rockville wedge series battery powered wireless dmx led lighting system has simply been the easiest par lighting system I have dealt with.
**The instruction manual gives an improper charging method.
-Trouble setting up DMX Channels? The Following includes some basic theory of operation and general information.
-LIGHTING CONTROLLER or APP controller wired or wireless. (NOT REQUIRED FOR ROCKVILLE WEDGE LINKING, UNLESS YOU WANT TO PROGRAM A LIGHT CHASE OR MULTIPLE PRESET SCENES; YOU WILL NOT NEED A CONTROLLER FOR THESE LIGHTS)
Controllers can have multiple channels (1-8) or(1-16)+ and controllers can also give multiple banks for use of those channels, usually changed by pressing a bank A/B/C) Button on the controller thus turning say an eight/sixteen channel controller into a 16or32 channel controller. These A/B/C/ banks are used to tell each light exactly what functions and settings you want active for the current scene/snapshot. Depending upon the light type model/make or version of a light they will usually have 9-18 channels of functionality; I will usually give each light a full 16 channels when addressing them.
Setting your light's address: [L1/ _001] L2/_017[L3/_033...+16...+16...]
Addressing your lights with a controller?
Let's Say Light 1,2 and Light 6 are all going to be controlled using only one Fixture/Light button on your controller.
Let's also set each other fixture up as if they are their own light with there own address thus if we want to talk to it we must click the proper fixture button on the controller, this part can be tricky if you have never worked with dmx before.
LIGHT-Add. / FIXTURE BUTTON [ON CONTROLLER]
L1_001 / LIGHT1
L2_001 / [L2 will be controlled with fixture/Light 1 button]
L3_017 / LIGHT2
L4_033 / LIGHT3
L5_049 / LIGHT4
L6_001 / [L6 controlled w/ Fixture 1 along with L1&L2 Add. _001]
** Wired DMX connections: If everything is working how you want it but you have a light flickering or possibly losing signal/reseting or otherwise acting a fool; the cause is possibly due to a feedback loop or some other startrek term and usually purchasing a dmx terminator and placing it in the last light at the end of your lighting chain will stop the problem!
www.amazon.com/Pin-DMX-Termin...