How to Set-Up the Jumper T-Lite Multi-protocol Radio

[@DEADGLOW]

Flawless tutorial. Everything perfectly set up and flying by the end of the video. Much thanks.

[@knowlestucker9752]

Dear sir, ive been flying DJI and toy style quads for 4-5 years, I recently took the dive and bought a tinyhawk freestyle rtf, and i bought a tinyhawk S, bnf, and a t-lite about 10 days ago.. i have struggled with getting it set up , ive watched so many videos that just confused and frustrated me , then i saw your video, your expression "lets take it from the top" was spot on, you helped me grasp the whole open TX aggravation. i was even able to get the freestyle and set that one up also..... im an old guy, 50 +, a disabled vet, Im enjoying learning new stuff, your video helped me a lot today , thanks

[@Datfpv]

glad it helped you out mate, hopefully it will all click into place its a bit of a mind field to get your head around at times! remember to subscribe, thanks

[@billybob-jv1cz]

excellent tutorial you saved my bacon! was just about to box up all my fpv gear and drop it off at the local tip, then i found this video!! delivery was very precise and easy to follow and got me out of trouble. now off to watch some more of your videos please keep up the good work and you now have a new subscriber.

[@Datfpv]

thank man, great to hear I do help out, stay flying!

[@PieceMaker]

Thank you. After doing all this, I was finally able to add reset and restart switches in DRL Sim.

[@Datfpv]

glad it helped, remember to subscribe! thanks

[@ricardoagmejia]

Me salvaste la vida. 2 días intentando todo y con tu vídeo se resolvieron mis problemas. Saludos ✌️

[@lowrevsrc]

Absolutely cracking video sir. Precise concise and start to finish was brilliant. Subbed and look forward to more of your videos on this tx. Thankyou for your time doing a proper tutorial

[@Datfpv]

thank you! all appreciated, plenty more to come.

[@albaniansuperiorshqipetari8055]

Very Helpful Video, Well Done, im hoing to follow your instructions

[@auck1969]

That was fantastic. Thank you. I'm fairly new to the hobby and your explanation for switches and mixes was excellent. New Sub here. Thanks again!

[@airdevil21]

Thank you this was very helpfull.Iam new to open tx so this was my first setup on the jumper t lite.

[@Datfpv]

Glad it helped!remember to subscribe, thanks

[@rckyfpv]

Just back from a flight with the T-lite! In my T-lite a wire disconnected from the motherboard. They forgot to put glue to it. I solderd it and it's working now.

[@Datfpv]

they forgot? that pretty bad... but at least you sorted it.. its a great controller. remember to subscribe, thanks!

[@LowVoltage_FPV]

This worked perfectly for me. Just one note that the menu locations for inputs and mix is reversed after flashing to current firmware. Other than that everything works.

[@knowlestucker9752]

And.... i had the sticks not lining up problem also. that was , an easy fix , thanks again

[@Datfpv]

Glad it helped

[@BongToker]

Thank you very much I'm backup in the air instead of using the original controller that came with the tiny hawk I am now using this awesome controller

[@Datfpv]

Glad I could help, thanks man

[@BongToker]

@@Datfpv no no thank you sir

[@torrezani]

What a great video sir, thank you!!

[@Datfpv]

Glad you liked it! hope it all helps!

[@HaveFaithInGod]

You really don't need to set up the "External RF" area of the menu since you are using the "Internal" modules for Frsky. Also something I accidentally found is that the bind button for all the Tiny Hawks can be engaged simply by depressing the battery cage under the button without a battery in place. It clicks the button one handed quite easily not requiring some small tool .

[@overfly_pt]

I don't have this radio but I liked to learn from the master👍🤗👌

[@Datfpv]

thanks man!

[@adrianau4246]

Thanks for this video very good job

[@Datfpv]

no worries, thanks!

[@supfly51]

External is for the add on module on the bay on the rear and not the receiver, the internal is the built in board in the radio

[@MainAccount.1]

Crossfire demo coming?? Keep up the great work bro

[@kristerius3093]

Hi, Im new to fpv and bought ELRS version. I have a little dumb question, Can I somehow use it without buying an external module?

[@AJ_FPV_Quads]

Hello! I just watched your video and i still cant connect my TineyHawk 3 plus. I have tried many times already but it wont bind. Please help! Thank you!

[@raps55]

The djenty intro always gets me

[@duce1nik823]

Thank you. This is great tutorial.

[@Datfpv]

Glad it was helpful! remember to subscribe

[@mkingwell45]

As you prefer arm switch reversed i think you should have explained how not to have a switch warning on powering up....

[@angelofmusic477]

I only get the display to *model 3 then I can't get to " setup mode". Which button did you select to get to setup mode? Thank you in advance.

[@flyfpvfish4962]

Nice that was a great review 👍.. for the one's that's just getting started.. Thanks...

[@Datfpv]

glad you liked it, thanks, remember to subscribe.

[@c47force15]

Regarding switches. If you are not mixing inputs you can just enter the switches directly in the mixer. No need to mess with inputs.

[@theoztreecrasher2647]

Yep. This tutorial is not without its faults. But it will help some real beginners. Then they should look elsewhere. 😉

[@beckykey7811]

the external rf switch controls the module bay, right? so if using internal d8, external rf does not need to be on..... am i wrong?

[@theoztreecrasher2647]

That is correct. There are quite a few such useless bits of misinformation in this video! 🤔🙄

[@adrianau4246]

15:10 what’s the min and max for and why did you make it smaller then what it originally was?

[@Datfpv]

you don't have to make them smaller, its meant if you have loads of positions so you don't have any overlaps with switch positions really...

[@jml4798]

Great video. But I am having an issue connecting my T-lite to a FrSky R-XSR receiver! Its driving me nuts. Do you have any ideas on what to do?

[@mcemtpockets1775]

How do u upgrade the multi protocol? I dont have card reader on v2

[@MrGarywells]

I understand the inputs 4 switch set up….what does the mixers do thanku

[@ChrisParayno]

This earned you my sub. Thank you for this!!!!

[@Datfpv]

Thanks for the sub!

[@rhysezfpv]

I did everything perfect like in your video. Step by step. Works perfect. Its after all settings are saved in Beta Flight, Disconnect to it, Power off drone and controller where the problem starts. When I turn on controller. The Model I named and created turns back into its original name " Model #1 " Like the Controller reset itself clean with all the work I did back to factory settings. Ive tried 3 times and same results. Controller came with SD card with Voice and lots of stuff in it :(

[@مصطفىالمحمود-ن8ب]

I did everything exactly and the plane and controller are the same as in the video but it tells me that the throttle channel is too high how do I adjust it?

[@ivobruinsi6093]

I have a question, I have a prandtl wing can you help me out to program a "wing". I have to combine controls, elevator and eilerons. In my t lite.

[@626jonny]

Will this set up work for a hummingbird BNF F4V3 and it uses ELRS. I’m new to this

[@molotovec]

Have you find out why failsafe toggle(to set up no pulses) isn't available at the t-lite for the frSky d8 (tinyhawk freestyle)? I had setup for the RM 161 earlier and it's there. Have no idea what I've missed.

[@sakimacro2422]

Thank you very much die your help

[@Datfpv]

Glad you liked it! hope it all helps!

[@suvenr]

Hey i wonder if it's possible to help me with an issue I've been experiencing with my jumper T lite controler. The left gimble doesn't seem to be responding when I try to accelerate or deccelerate. On the display the gimble indicator just slowly moves up and slowly moves down. Is there any way I can recalibrate or do something else to sort this issue out?

[@Techzino1]

I’m new to this. please can I use jumper tx module with my jumper t lite v2 jp4-in-1 transmitter and still work as multi protocol? I wanna confirm this before I get jumper tx module order placed on AliExpress 🙏🙏🙏

[@gadgetman404]

Love your channel can you do video on fitting receiver setting up binding etc cheers keep em coming I've subbed you

[@Datfpv]

thanks man - and particular receiver - I've done crossfire all over the place and will be doing tracer soon - some of the whoops on my channel are frsky - anything in particular you need ?

[@GorillamansGarage]

So if you set up switches in Beta flight to your controller... why do it twice just on the controller first?

[@cablecutter9044]

Fantastic

[@Datfpv]

Thank you so much 😀

[@dronefilmsgermany]

my throttle is on PITCH although my betaflight is AETR can u plase help how to change.

[@ecenarro]

Hi. Where did you buy or where can I find those thumb sticks? Thanks.

[@Datfpv]

here you go, grand lotus (do subscribe!): www.banggood.com/2-PCS-Original-Frsky-Transmitter-M3-CNC-Aluminum-Gimbal-Stick-Ends-for-Frsky-X9E-X12S-or-M9-Gimbal-X12S-for-RC-Drone-FPV-Racing-p-1162867.html?p=LG060056157431202101&custlinkid=1413593

[@gadgetman404]

Hi great video as always can you help I've got Diatone Roma L5 finally got Express Lrs working but one thing I've noticed got GPS resume but it not set up in Betaflight pc or speedy bee mobile so when I pick switch etc add range it doesn't light up and input my Google's on.to see what mode I'm in when try to arm it needs and says gls rescue SW so when I look into it more no matter which Aux switch I pick it always takes Aux 1 and you know need Aux 1 to arm express lrs can you help me set this up as default when fail safe is to drop also if tick land in failsafe option takes Aux 1 and I can't arm drone but if i select drop it arms and all switches work any help pleay cheers from heatwave uk

[@JoseandAsh]

Amazing Tutorial Sir! Can’t thank you enough to show step by step for those of us dipping our toes in the hobby, When You made the Switches in Beta for the arm beep flip, Do you have to do it in the controller first ? Also if you were to add angle mode and others On page 5 and 6 if there’s no more space where do you put them? Or could you scroll down?

[@set.adrift.somewhere]

I’m very new to this hobby. After much reading, Jumper T-Lite is my first purchase. I’m convinced this radio will last me a while. Thank you for this setup video. This has help me understand this aspect of FPV. I’m still learning to fly. I’m learning with the Hubsan H107C LOS. This drone says it has 4 channels. Does this mean that I cannot add Arm or Beeps on my switches? The 4 channels are taken up by the flying controls? Also I’m also getting RF signal critical but don’t notice any flying control errors or lags. Thanks again! Subscribed.

[@Datfpv]

I can't really comment abut the Hubsan H107C LOS. - I don't know anything about it, but it does look pretty cheap, and I think it comes with a controller anyway, so for that one I'd stick with the controller they send with it ?

[@gabrieladominguez.5025]

How test the trassmision power?

[@craigdavo]

Hello 👋 is it possible to lower end points on this tx? Thanks.

[@MarkFisch]

Where does one get those thumb pads u are using

[@Datfpv]

they are these ones: kzbin.info/www/bejne/m2Wth2iBjbeaZpY grand lotus...

[@yogician]

Thank you 🙏

[@Datfpv]

You’re welcome 😊

[@patterdalebt]

Great demo but I also fly fixed wing mainly DLG and other gliders. Do you have a simple basic setup for these crafts. Would appreciate your input as this is a new system for me .Thanks Colin

[@Datfpv]

no sorry, never done fixed wing :(

[@honestreview9019]

Great video. Can I bind a mobula 6 to it frsky receiver on board

[@Datfpv]

thanks and yes you can: kzbin.info/www/bejne/f5qolWp6bK-Vn9U

[@narecardoso1]

Thank you 😊👍

[@Datfpv]

No problem 👍

[@gadgetman404]

How do you Change power on jumper t lite Cheer's buddy

[@pietervisser9445]

Do u need to arm the drone via a RC switch before u can fly,is the switch just for safety?Can u bind and fly without any switches? Many thanks.

[@Datfpv]

hi - yes you need to set the arm switch etc else you can't fly :(

[@pietervisser9445]

@@Datfpv When setting up switches,does the RC respond to arm as a command when u name it 'arm',How does the specific switch know what to do?

[@georgeaura]

If I have the jumper t16pro 2 can I just put the sd card with all my models in the jumper lite and it work?

[@Datfpv]

not sure to be honest mate... you might need to transfer somehow ?

[@jordyb323]

I'm doing everything to the letter and it's still not wanting to bind

[@DavePinnock]

Thanks for the guide, one thing though mode 'multi' means you are selecting the multi protocol module its not just for multirotors ;-)

[@Datfpv]

Thanks for the info!

[@earlhelm515]

Thank you! If you have a few D8 micro quads can't you bind them to the same model position in the radio and just name it D8? That way you could fly all your small D8 quads on the same model selection...

[@Datfpv]

yes mate you can - I normally dupe just incase I want a slight diff switch set-up on a quad or something like that.

[@suvenr]

What would be the protocol for a mobula 6 drone with a frsky receiver bought from banggood

[@Datfpv]

frsky d8 mate: kzbin.info/www/bejne/f5qolWp6bK-Vn9U

[@suvenr]

@@Datfpv thank you

[@mcemtpockets1775]

I hope this helps me

[@supersaiyamarimo]

If you don't mind me asking, what size threads does the stick ends use?

[@Datfpv]

hey - they are M3 thread size - remember to subscribe! thanks

[@anatoliistukalenko4564]

please help. when the remote is connected to the pc to play the simulator, it beeps every time you move the throttle stick to the center. thanks

[@Datfpv]

not sure mate sorry :(

[@cG-es8mb]

Can I use this controller with drone that you don’t use beta flight with? I have the betafpv advance starter kit 2.

[@Datfpv]

its a multi protocol radio so it does cover a lot of recievers, theres a full list of what it covers on the jumper website. It all depends whats in that quad you have and if the radio covers it, you'll have to check out the specs.

[@zico3239]

i been trying to bind a lemon satellite rx to my t lite .the red led on rx start blinking but when I press the enter it still continue blinking and doesnt bind 'i think I am doing something wrong setting the rx or something that I should setup when binding a sat rx .

[@Datfpv]

I don't know them? don't know the set-up for them.

[@zico3239]

@@Datfpv thanks i did it aventually

[@zeusworld1046]

Nice review! Have you idea what is the "key stack" that says on mine? Thanks 👍

[@Datfpv]

what is that? no idea? haven't heard / seen that one before?

[@zeusworld1046]

@@Datfpv sorry! I mean key stuck...

[@jamesceastep8874]

I had just received my Jumper T-Lite in the mail and your video popped up on my You Tube selections...how timely! I had an Emax Tiny Hawk S that I had not set up containing a Fr Sky D8 receiver. So your wonderful instruction took me step by step through almost all the steps I needed to configure my quad on my new Tx and in Betaflight. All that remains is for me to choose a 3 position switch to control Angle, Horizon, and Acro modes. Thank you for your excellent, well photographed, and clearly described tutelage! As the result of your video I have subscribed! Do you think that the Jumper T-Lite would be a good candidate for either the Happymodel ES915 or ES24 modules? I haven't received mine yet and I am not sure if the included Jumper backpack for modules could be adapted to these long range rf modules, or if they could somehow be inserted internally. - Jim

[@Datfpv]

Hi! many thanks for the kind words glad it helped you out - for the modules, I'm not sure, it would depend on what volts / power they need to run, I know there's issues with the crossfire module on the t-lite just dying / not working the controller can't maintain the power need to run the long range module... and thats the last thing you need.

[@cG-es8mb]

I got my tinyhawk race 2 binded with jumper t16 but it want do anything. Only thing that works on the quad is the beeper.

[@cG-es8mb]

Never mind. I got it fixed. In the manual the mapping is TAER1234. My jumper t16 default is AETR so once I changed the input map to TAER it works

[@Datfpv]

cool, I also cover this in the vid and link it in, its the most common thing ! kzbin.info/www/bejne/bYu4lmCpeJygo7c

[@cG-es8mb]

@@Datfpv yeah. The manual for the drone isn’t the best. Does the tinyhawk race 2 seem slow to input response in angle mode? I know in acro mode it is very responsive.I fly in angle mode. Also, do I need to get into beta flight to change anything with the tinyhawk race 2 or leave it stock?

[@joeery5699]

My tinyhawk 2 is rtf,should i re-execute the BNF CLI file to use this jumper t-lite?

[@Datfpv]

all you have to do is bind the controller with the tinyhawk. thats it.

[@mikemkm7521]

Hello Datfpv I installed an SD with the sounds files, I get the welcome sound, lost telemetry sound, and switch sound. But I do not get the arm sound, angle, and acro sound. I understand that special functions are required, can someone help with a guide with the procedure, I am having trouble with that part.

[@joeyparraga2513]

What do I do if it refuses to go solid blue? It keeps flashing even though it looks like its bound

[@Datfpv]

have you checked the sticks / connected it to betaflight if you think its bound: kzbin.info/www/bejne/bYu4lmCpeJygo7c

[@samcollins6394]

Hi. What stick ends are you using?.

[@Datfpv]

hey - they are the frsky grand lotus M3 stick ends. - remember to subscribe! thanks

[@jpmat2878]

Hi, I cannot turn ON the Jumper T-Lite anymore. I received it 3 days ago. It was working good and I used to charge with USB, so the battery was in the correct position and the voltage good. I use it at home only for 3 days to check my drone before the first flight. Is the radio already dead ?

[@Datfpv]

sounds like you should send it back and ask for a replacement.

[@jpmat2878]

​@@Datfpv I bought it on Aliexpress. I have to wait the agreement of the seller. It will take a long time. I have seen on Reddit that some people, having the same problem, received an email from Jumper asking them to remove the "Capacitance" but I don't know what it means ??

[@PieceMaker]

Remember that you can't turn it on when USB is connected.

[@jpmat2878]

@@PieceMaker You can imagine that I tried everything to turn it on... but nothing

[@PieceMaker]

@@jpmat2878 I guess you also did bent the battery contacts slightly inwards in case your 18650 does not have an extended plus-pole?

[@jeffreyhofma1943]

I tried and tried to follow still no good for me ,,so difficult to pair to a meteror 65

[@SleepsSam]

how to tell if i should use D8 or D16?

[@Datfpv]

normally the quad has the specs of what is needed to connect to it, but you can try both and see which one connects if the quad didn't have any specs with it?

[@pietervisser9445]

Hello.Can u fly with only setting up 1 arm switch?

[@Datfpv]

yes you can if you like... the vid shows you how to set up the switch etc follow that and you'll be fine.

[@HaveFaithInGod]

You assigned "Beep" to Input 6 which is the acro/ angle/ horz flight mode input. Beeper is Input 7 and Flip Over is on imput 8. Input 5 is of course Arm. That's how mine all defaulted anyway. Confusing for me now.

[@billybob-jv1cz]

if thats how you like you controller set up then set it up like that!!! Datfpv was just showing us how to set up the switch's not defining what went where, thats personal choice now you know how to set it up do it your way then no confusion!!

[@HaveFaithInGod]

@@billybob-jv1cz goober I'm not talking about the switches it's the default channels I was referring to. Also, be chill no one was barking at you just peacefully commenting.

[@samuelevinti]

Hi, great video! Do you think this radio (which I’m getting in the mail soon) is compatible with radiomaster receivers? I’m waiting for a rmaster R81 rx as well). I need to replace my r-xsr which is probably not bindable to the t-lite because of all the frsky recent BS

[@Datfpv]

full list of supported protocols: www.multi-module.org/basics/supported-protocols

[@samuelevinti]

@@Datfpv radiomaster d8 rx ate supposed to be clone of frsky d8 right?

[@Datfpv]

@@samuelevinti don't know to be honest mate...

[@samuelevinti]

@@Datfpv thanks!

[@jamesparoline3757]

Do you need the SD card? if yes where do I get the SD files?

[@Datfpv]

sd card files are from here if you need them: doc.open-tx.org/manual-for-opentx-2-2/sdcard

[@davidgodleski9034]

Do I have to go into betaflight to change switch positions

[@Datfpv]

yes have to use / do both betaflight and controller for switches to work / change etc!

[@davidgodleski9034]

@@Datfpv thank u

[@Hdjeudhdbhajus]

Is this Jumper T lite support TBS Nano Rx receiver???

[@Datfpv]

yes but you have to buy a seperate crossfire module (nano module) for the controller, also it does have battery drain issues... so I don't think I would recommend it if you're after crossfirewith it.

[@brettwilson2092]

Trying to use this vid for connecting this remote to my cinelog 25 without any luck. I don’t know if I need frsky x or L or Rx ect: to bind to drone, new to fpv flying and always had RDF drones. If someone can help me out here would be much appreciated

[@Datfpv]

the quad you purchased should state what receiver is in it - then you use the same one in the controller - you just match them up.

[@troyrichardson3420]

Wow.... 🤩

[@Datfpv]

its a great controller!

[@troyrichardson3420]

@@Datfpv one day

[@morpheusone7755]

Brilliant video but iv just watched it all an still I don't know why my 3 pos switches will only behave as 2 pos ones

[@Datfpv]

you just need to set 3 positions in betaflight for the same switch thats it - if that is not your issue your switches are broken ?

[@morpheusone7755]

@@Datfpvthanks I actually did it last night after some tinkering with the controllers screen you go to mixer,, select the input after option rather than edit on the already there 3 way switch I'd set up that wasn't working then just set the 3rd position as a switch on the input after screen, that worked its all one 3 way switch on the same aux channel now. .

[@Rc_nozza74]

followed as shown still no luck with my mobula 6

[@the_steko]

how to make arm and disarm with no bettaflight

[@Datfpv]

you can't ! - you could get hold of a speedy bee adapter and do it that way...

[@solen1849]

am I the only person that uses 3 position switches? Thought that would have been useful because its not as easy as a 2 position switch

[@Datfpv]

some do mate - I'm sure you're not alone...

[@machinedred]

I copied from my x7 to t-lite . I need to change my F switch to the C switch across all models . How do I do that in radio setup not model setup . Thanks

[@pumapants9689]

where is video for where if your gimbals are not orientated correctly

[@Datfpv]

this one mate: kzbin.info/www/bejne/bYu4lmCpeJygo7c

[@osmanycubano]

PRO

[@SkyBandit45]

Doesn't work well with umx models

[@SkyBandit45]

Multi doesn't mean multi copter it means multi protocol.

[@Datfpv]

yes mate... its honestly just nerves when the cameras on ... and not being able to speak properly!

[@garplin]

please fix the gain on this video.

[@barryfredrick2731]

*first thing should have been* WHAT KIND OF BATTERY SHOULD I BUY WITH IT BECAUSE IT DOESN'T COME WITH ONE!!! NOW I GOTTA WAIT ANOTHER 2 WEEKS BEFORE THEY GET HERE!😔😭

[@Datfpv]

sorry mate :( this is the battery I purchased: www.amazon.co.uk/gp/product/B085C7Y4M4/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

[@barryfredrick2731]

@@Datfpv All to the good family, thank you for the reply. Respect✌️

[@kroppotheclown6288]

they need to put a bigger and brighter led on that thing.