I'm getting a Jumper transmitter for Christmas, thanks for showing this tutorial, because I have a war bird also!
@79ltd3 ай бұрын
Thank you for posting this. I never would have set up my new Jumper to my War Bird without it. Great tutorial!
@PropsWheels3 ай бұрын
Thank you for your kind comment! 😁
@raptor23302 жыл бұрын
how do you calibrate and turn on the aerobatics with this remote?
@Vosper3853 жыл бұрын
Thank you for sharing, Just got an E-Flite A-10 UMX and I'm looking to bind it to the Jumper T-Lite, not quite the same but very, very helpful.
@33narim2 жыл бұрын
gread vid. works with the new jumper too. how can i put the "stunt" button?
@lazyjerryguitarman5 ай бұрын
Impressive instructions on setting this up. I need to try :)
@jgme6273 жыл бұрын
Awesome instruction to bind 👍👍👍.
@PropsWheels3 жыл бұрын
Thank you mate!
@tombyrne114210 ай бұрын
Thanks to you I was able to bind to my Rage Spitfire. I have two questions. How to I program the stunt feature? program ch6 to a 2 position switch, but all that did was lose all controls except for throttle. I had to delete model and start again. Secondly, might you know the protocol for the Skynetics mini warbirds? It is not V761 and it is not Futaba. Thx,
@PANTHERBURNS4 ай бұрын
Is it possible to use the radio to add some expo and dual rates to your mini warbird?
@DougEfresh.3 жыл бұрын
Very cool man, thanks for the great video. I got all three of my warbirds bound to the Jumper T lite now! I never knew what the protocol was and didn't know how to get the 3 position switch to work which was the main reason I never tried. Now I need to see if the F22 will be the same. If so maybe I can get it to finally fly because I didn't have much luck with the f22 before. Maybe because it's a pusher? IDK but you made my day for sure. Thanks again.
@PropsWheels3 жыл бұрын
Hi Doug. Glad I could help! I love my jumper. I am now using it with all my VolantexRC mini airplanes. The latest one is a Mini Trainstar 3CH high-wing airplane. It should not matter of it is a puller or pusher prop. If it had been designed and manufactured well, it should fly well. However, the toy controllers that come with these airplanes sometimes can have dead areas in the middle, which usually caused the planes to do abrupt changes. It is worth trying it with your Jumper and see if it flies better. Good luck!
@DougEfresh.3 жыл бұрын
@@PropsWheels thanks again. I got the Eachine F22 just after I bought all the warbirds. I can't seem to get it to fly. Actually got it to fly for about 30 seconds so I know it will. Hopefully the Jumper will help. Just gotta wait for all this rain to stop.
@stevenwebb30073 жыл бұрын
@@DougEfresh. my F22 will fly ok for a bit (better at the field at full speed than crabbing around in the back yard) then it will struggle to make a turn. Like I will tell it to go right and it will be stuck in a left turn. It is super frustrating. I am considering getting the Jumper T Lite to see if it smooths out or if I need to rip the guts out and just put a spectrum receiver in there.
@DougEfresh.3 жыл бұрын
@@stevenwebb3007 I have mine bound to the jumper now and doesn't make any difference. I watch all the reviewers doing it with no problems. Albert Kim mentioned maybe I got a bad one. Not sure about that, but it's very frustrating.
@burdok45913 жыл бұрын
@@DougEfresh. I had to cut the bottom open on mine and move the elevator rod to outer hole for more throw then it flew much better
@FrankDoylezw3 жыл бұрын
Really useful, thanks. On the original transmitter you can calibrate the gyro. How would you do the same with this transmitter, please?
@butchking1546 ай бұрын
this is the best set up vidio iv seen so far on binding the jumper great job
@Raptor50aus Жыл бұрын
Thanks my T28 connects fine but the gyro will not disable with switch B? thanks
@mathieupeers6496 Жыл бұрын
Bonjour savez vous si ce protocoles est dans la radio Jumper t12 , ? Pour lier des petits avion de ce genre
@Indy647383 жыл бұрын
Hi, thanks for this cool video.. I have the T8SG V2 plus TX with a similar menu, but for some reasons the 4 channels are absolutely not correct (except the throttle)... how to change the channels?
@Jeff-nu4lm7 ай бұрын
Brilliant is that a jumper t lite version 1 or 2 ?
@user-cc3cq7xi6p Жыл бұрын
Thanks man, great work!
@fordboyzzzz3 жыл бұрын
thank you very much for making this great video. is it easy to swap channels around for changing from mode 2 to mode 1?
@jakelang43873 жыл бұрын
Mr I'm trying to set up a heli with this radio and I'm so lost on how to make the pitch rase with my throttle
@vassargo83803 жыл бұрын
Great video, very informative. Is that the CC2500 or the JP4IN1 radio?
@longjammeriii33233 жыл бұрын
Hi thanks for the great information on the setup but do you know which channel the stunt button is on? Thanks in advance and best wishes from Alan in the UK 🤗🤗🤗👍👍👍
@PropsWheels3 жыл бұрын
Thank you Alan. I did not program the stunt (flip) button, but it is listed to be on CH7: www.multi-module.org/using-the-module/protocol-details/v761 Also, calibration function is listed on CH6. Greetings from Boston!
@tombyrne114210 ай бұрын
@@PropsWheels That is helpful.
@messybench9742 жыл бұрын
I have the radio and a mini convergence but I got how to bound it but it does nothing, does anyone had successfully make it work? Thanks
@gabrieladominguez.5025 Жыл бұрын
Dear friend: I install My Piper Super Cub 500 Volantex to my new Jumper T Lite the first fly was good, the second fly I have troubles as interference and crash my model, I put the radio to a Ranger 600 the first fly was difficult, little turn left, normal turn right, ok. for the second fly the throttle no operate and the ruder and elevator yes operate. Is the radio bad?... I fly the models whit his radio normal and no troubles. Please tell me I do.
@AirFrames213 жыл бұрын
Great video thanks - but my T-lite has no V761 protocol - did you have to update firmware or something? it goes SLT, V911S but no V761 - any idea how to fix it please?
@burdok45913 жыл бұрын
Mathew did you buy the CC2500 version or the JP4-in-1 transmitter?
@Gorillatoes213 жыл бұрын
@@burdok4591 I thought I was buying 4in1 bit they sent cc2500 I guess this is the reason I have no V761… Thanks for reply
@nicksuger11203 жыл бұрын
I don't get the "Bind" option when trying to bind crossfire :(
@PropsWheels3 жыл бұрын
CrossFire operates on 900MHz frequency, so as far as I know these planes on 2.4GHz frequency will not work with that module.
@M4rkmcc213 жыл бұрын
If I connect this controller to the plane does the original controller still work on the plane?
@paulopc77 Жыл бұрын
Very Very good 🎉
@nickhayley3 жыл бұрын
Still been meaning to get a little Trojan... haven't bothered to click that crazy button just yet lol
@PropsWheels3 жыл бұрын
Although I love T-28 Trojans in general, the F4U Corsair in this Eachine Mini Warbird series flies better.
@hollycool291011 ай бұрын
@@PropsWheelsI don't think that the Trojan is more maneuverable and much smoother to land, without the rapid stall of the F4U .
@butchking1546 ай бұрын
@@PropsWheels the f4u is awsome plane in the air it flys greatttttttttt
@butchking1545 ай бұрын
what buttons or program is for rudder ,aileron, and elivater trim