How to Set Up Your Pangolin FB3 and Quickshow for your Show Laser Unit

[@youandme12345]

Thank you for the video. How to sync music from DJ controller? Thanks

[@LasershowLab]

Hello, i suggest you have to use time code to sync music using Beyond software, if you have Pangolin TC4000 much better for that.

[@youandme12345]

I really appreciate your help ! @@LasershowLab

[@namkent]

My fb3 is using normally. I switched to another computer with Windows 10 64 bit. When I plug in the fb3, the computer says Usb device not recognized. What should I do to fix this problem?

[@LasershowLab]

did you install first the QS to another computer and register the fb3 license? If still not recognised, you may need to check and update your USB drivers, or probably the USB port is damage, there's a lot of factor that causes that, but the technicalities i have mentioned can be helpful for the issue you have experienced. One thing try to use another cable connector from fb3 to your pc.

[@rimonpaul]

How much will it cost in Bangladesh?

[@LasershowLab]

i dont know about that country all i know that you need to order that from pangolin at around 900usd

[@henriquedelben]

With fb3qs, how could I control multiple lasers with a DMX controller?

[@LasershowLab]

you only need one pc controller using QS DMX settings but 1 FB3 per laser. You just need to manage projection zones for your DMX.

[@henriquedelben]

@@LasershowLab Could I daisy chain each laser using DMX or ArtNet. I have a enttec dmx usb pro

[@LasershowLab]

yes you can if you are using traditional DMX connection but if your lasers have an actual DMX in and out port, but i all i know about artnet is almost the same procedure as you are connecting FB3 or FB4

[@rimonpaul]

I can use any animation laser?

[@rimonpaul]

I use a 3-watt animation laser from The Kate King Company. I can use it.?

[@LasershowLab]

as long as your laser has ILDA input port and you have original fb3 module you are fine

[@rimonpaul]

@@LasershowLab Thank you.

[@rimonpaul]

I'm learning a lot from watching your videos.

[@felipemtz7705]

Cual es su precio y donde la adquiero

[@LasershowLab]

Lo compré directamente de Pangolin con su precio minorista publicado en 2018, pero ahora han aumentado, visite su sitio web para saber más.

[@patvlog4874]

How to solve the problem of FB3QS signal not showing light?

[@LasershowLab]

Either reinstall the software or check your connector cable or your USB port

[@LasershowLab]

its another issue if you accidentally drop your FB3QS on the hard surface

[@amolpote3978]

How to buy

[@LasershowLab]

you purchase it through here pangolin.com/collections/laser-control-hardware

[@reinardace0301]

Why is that its show that it needs pangilin hardware

[@LasershowLab]

what do you mean it needs pangolin hardware. Laser that has an ILDA input connector can be driven by Pangolin FB3 hardware it has already a license key for Quickshow when you download and install the software from Pangolin website

[@hindurajabhaiyamaharashtra427]

Price

[@LasershowLab]

$490 usd

[@amolpote3978]

How to buy

[@LasershowLab]

purchase it here pangolin.com/collections/laser-control-hardware

[@Rudralightshow]

How to buy

[@LasershowLab]

I just bought it directly from Pangolin Laser website last 2018. You can try to go to their website for that one.