This video will teach you how to adjust your valve. Wrong setting could make your generator not to start. Kindly subscribe. Thank you. @jcondon1 @Generatorguru @RepairGeek
Пікірлер: 145
@truthteller198615 күн бұрын
Thank u bro. Ur video help me alot today. , I was unable to reach any technician due to today being Sunday. I was able to fix set the valve myself.
@jaywealthmechanics928511 күн бұрын
You are welcome 🤗
@chibuzoronochie6042 ай бұрын
I tried it and it work very fast. Thank you so much, Sir. I have learnt a lot from you. You have saved me time and money again. I always enjoy your videos. You are always straight to the point and have clear explanations. Keep up the good work. Remain blessed.
@jaywealthmechanics92852 ай бұрын
Amen 🙏
@okiemutejeffrey17112 ай бұрын
Nice work man, your lecture is very clear and straight forward thanks ❤
@jaywealthmechanics92852 ай бұрын
Thanks 😊
@rasaqsalami33292 ай бұрын
How do you manage the engine that over speed after lowered the adjustment to end ?
@GuardianApe2 жыл бұрын
You don't even know how amazing you are . I always look forward to you content . No boring talk of too dead center etc just straight to the point solutions .
@jaywealthmechanics92852 жыл бұрын
Thank you 😊😊. Your comment gives me joy
@acorenuche Жыл бұрын
Guardian APE, U just too funny 🤣 Top dead center and bottom... U know like theory
@GuardianApe Жыл бұрын
@@acorenuche my brother , story na sleeping pill. Once the grammar don begin plenty I move .
@jaywealthmechanics9285 Жыл бұрын
@@GuardianApe smile 😃
@arinzecharles2193 Жыл бұрын
Good coaching. African, straight and the local way. Interesting!
@arnoldmoses2952 Жыл бұрын
I love your videos, I did it and it worked like a miracle, thank you God bless you bro
@jaywealthmechanics9285 Жыл бұрын
You welcome 🙏
@apostleemma69 Жыл бұрын
Thank you very much for the simple way you explain complex issues. God bless you.
@jaywealthmechanics9285 Жыл бұрын
You are welcome
@1622felixАй бұрын
I like how you get to the point thanks for the video
@jaywealthmechanics9285Ай бұрын
You are welcome
@moalemnou4363 Жыл бұрын
Thank you very much sir, after watching your video I manage to fix the starting issue on my genset. I like your videos, no bullshit but straight to the point.
@jaywealthmechanics9285 Жыл бұрын
You’re welcome
@raukawa4732 Жыл бұрын
Thank you bro, you explained this way better than any other videos I’ve watched.
@jaywealthmechanics9285 Жыл бұрын
Thanks for watching 😃
@edabikestar Жыл бұрын
From Pa, USA Thank you so much bro!
@jaywealthmechanics9285 Жыл бұрын
You’re welcome 😁
@jaywealthmechanics9285 Жыл бұрын
You’re welcome 😁
@ezeanivitalis43636 ай бұрын
Thanks bro. I was able to fix my sputtering generator.
@jaywealthmechanics92856 ай бұрын
You are welcome 💯
@opeyemiafolayan15414 ай бұрын
Thank you, this is a life saving tip
@jaywealthmechanics92854 ай бұрын
You are welcome
@samuelekanem43802 жыл бұрын
Pls make a video on how to reduce the noise from tiger generator. I service my tiger gen through ur tutorials it's so amazing
@jaywealthmechanics92852 жыл бұрын
Noted 😁.
@HorizonWealth5 ай бұрын
You are a Life saver
@jaywealthmechanics92854 ай бұрын
🩷💯
@edwardbarrett75814 ай бұрын
Hi brother great video all the way from Ireland here 👌 I’ve taken apart a engine on a pressure washer it was starting before I went around it , but I lined up the timing and everything I’ve a spark but I messed with these lads and now it’s hard to pull but won’t even come up and my carbs clean and I have spark so I’m clueless here I’ve used a small blade but no joy for me any help would be greatly appreciated
@jaywealthmechanics92853 ай бұрын
Firstly confirm if your timing is well set and the valve settings.
@Joysoftinfo2 жыл бұрын
I am using elepon epg3910, please can you make a video on how to service the generator, with a full explanation. It will help. Thank you in advance. You are great
@jaywealthmechanics92852 жыл бұрын
Okay will do that. Watch out
@peteroluwabunmi125310 ай бұрын
Kudos to you Bro..
@jaywealthmechanics928510 ай бұрын
❤️
@user-nb3kf9iz3f Жыл бұрын
الف رحمه على والديك
@jollyrobotics15257 ай бұрын
Thank you sir I like this
@jaywealthmechanics92857 ай бұрын
You are welcome
@ajayitemidayo5225 Жыл бұрын
I love you bro God bless you!
@jaywealthmechanics9285 Жыл бұрын
Amen 🙏
@user-cm4mx7ly5f7 ай бұрын
I like that😊want to see more
@jaywealthmechanics92857 ай бұрын
Okay ✅
@chiefdenis Жыл бұрын
Love your work bro, wish you more growth on KZbin
@jaywealthmechanics9285 Жыл бұрын
Thanks 😊
@ClaraMwamba-gd4zk4 ай бұрын
How are gensets classified? Do they all have the same dimensions of parts regardless of the manufacturer? Or maybe each manufacturer has their own dimensions and design of the parts?
@jaywealthmechanics92853 ай бұрын
Generators can be classified in various ways based on their function, size, fuel type, and application. Each manufacturer have is own dimensions and design
@olubunmiayoola7954 Жыл бұрын
You're the best! Keep it up
@jaywealthmechanics9285 Жыл бұрын
Thanks
@user-yg5qv7cq9fАй бұрын
Thanks Where are you from? And why do you need to use this generator?
@jaywealthmechanics9285Ай бұрын
From Nigeria lagos. I use the generator because the generator is having issue which I need to fix and teach others how I fix it.
@DaveLockwood-d6e24 күн бұрын
The piston should be at top dead center before any adjustment is made.
@jaywealthmechanics92853 күн бұрын
They are different methods of adjusting it though.
@RachelWhite-vs7dc8 ай бұрын
Looked pretty easy
@EbenezerOgbeh-xq1iu11 ай бұрын
Wow very good that is how I will b doing it What of if the calm is having issue and sometime starting it will b strong how can u detect that d calm have problem Because there was a time like I set and set not knowing is d calm how can u know is the calm
@ambasghana744 ай бұрын
❤
@jaywealthmechanics92853 ай бұрын
🩷🩷💯
@lasource811 Жыл бұрын
subbed because of your video five days ago. my govenor sproket came out and had no idea how it all fits back together. So appriciate that and looking forward to more videos. Can I ask a question in regards to setting the valves. From what I understood one needs to do the check on the compreshion stroke. How do we know the engine piston is at top dead centre when just after copreshion, as there are two strokes. One for copresion and one for exsaust. Bit confused about this? Thanks.
@acorenuche Жыл бұрын
You can know when it's as the top dead center by removing the spark plugs and putting a screw driver through the hole to check when the piston comes up most...
@chinaecheremchukwuma97054 ай бұрын
👍👍👍👍👍👍❤
@jaywealthmechanics92853 ай бұрын
🩷🩷💯
@shamxykillz12972 ай бұрын
What did you do to make the ex valve go downward?
@jaywealthmechanics92852 ай бұрын
You draw the generator handle.
@allThingzEngine Жыл бұрын
You are doing a really great job 👏. My question is when is one suppose to stop ringing a generator? Also when is one expected to buy a half engine ?
@jaywealthmechanics9285 Жыл бұрын
You stop ringing a generator when your engine block is bad. You are expected to buy new half engine when your engine block is blown.
@allThingzEngine Жыл бұрын
@@jaywealthmechanics9285 thank you 😊
@timothy61772 жыл бұрын
Nice
@jaywealthmechanics92852 жыл бұрын
Thanks 😊
@Howessolo5 ай бұрын
Thanks
@jaywealthmechanics92855 ай бұрын
Thanks
@RachelWhite-vs7dc8 ай бұрын
Can see . . Love it
@EdogaRejoiceАй бұрын
The person I called this morning to check mine said that the valve needs to be changed and he collected 4500 to buy new one
@jaywealthmechanics9285Ай бұрын
Wow.
@WillsOdiong5 ай бұрын
Can Gen make noise if the Valve is not well set?
@jaywealthmechanics92855 ай бұрын
Yes it will make noise when the valve is not set well.
@jollyrobotics15257 ай бұрын
Please sir how to rinse generator
@jaywealthmechanics92857 ай бұрын
You can raise or throttle from the carburetor spring.
@emekavictor17782 жыл бұрын
Can u do a video on how to tune a Elepaq carburetor for less consumption of fuel
@jaywealthmechanics92852 жыл бұрын
Noted 💯
@emekavictor17782 жыл бұрын
Thank u for ur time
@user-eb7gw6jh7d6 ай бұрын
Teach me how to senting value 1900 engine thanks
@jaywealthmechanics92856 ай бұрын
Watch out for the video
@timothy61772 жыл бұрын
Can you do a video on how to fix piston rings for a big generator thank you
@jaywealthmechanics92852 жыл бұрын
Okay noted.. I will do the video soon
@jaywealthmechanics92852 жыл бұрын
Have drop the video ... Check my latest video.
@clintonugonna32995 ай бұрын
My thermocool gen starter became hard to pull after the mechanic reset the valve i noticed the generator is now consuming oil. What could be the cause
@user-pu8ez1tg3m6 ай бұрын
What's about if the pressure is too much and is damaging the starter
@jaywealthmechanics92856 ай бұрын
Is either the valve is not set or the camshaft is bad
@gbadamosiabdullahi71 Жыл бұрын
My generator is hard pull to start and I have changed the cam shaft pls what is happening
@jaywealthmechanics9285 Жыл бұрын
Set the valve well or did you shorten the connecting rod.
@Ca_Lyn_Dion Жыл бұрын
Please i need your help mine is a medium senwei generator
@jaywealthmechanics9285 Жыл бұрын
What is the fault of your Generator
@michaelosamudiamen261 Жыл бұрын
Please sir my Generator. Seems kinda loose , when I try to draw and start the generator it’s as if there isn’t pressure on the generator. What should I do ?
@jaywealthmechanics9285 Жыл бұрын
Set the valve or grind the valve.
@hamzatidris3349 Жыл бұрын
I have a 1.9kva that doesn't have pressure......how do i set the valb Its just solf whenever i want to start it
@jaywealthmechanics9285 Жыл бұрын
Does it have this kind of valve structure or it is butterfly own.
@dezlintemiyon2295 Жыл бұрын
Pls what causes a generator to make a loud noise which obviously is coming from the valve area?
@jaywealthmechanics9285 Жыл бұрын
Check if the valve is set well. The carpet valve might increase the noise if it is not set well
@efijemuehphilip542 Жыл бұрын
Hi, please what's the wattage of a small tiger generator
@jaywealthmechanics9285 Жыл бұрын
950 watt
@user-xo9yn9id7i Жыл бұрын
Please jay can valve make a generator to be giving gun shot sounds when trying to start it
@jaywealthmechanics9285 Жыл бұрын
Yes it can. Change the valve or you ground it.
@atewogbadewonderful736710 ай бұрын
It can also be Spark Plug sometimes
@user-zi4ej4ck2s10 ай бұрын
Hi my brother put 2 stroke mixed fuel on our 4 stroke generator with oil going into the oil plug and now it's not running. What could be the problem?
@jollyrobotics15257 ай бұрын
How to rinse generator
@jaywealthmechanics92856 ай бұрын
You can raise generator from the throttle spring
@RachelWhite-vs7dc8 ай бұрын
What size razor blade what type carpet or reg
@boyojoysoft42842 жыл бұрын
Please, my generator went off after running for like 15 to 30 minutes, I have changed the oil and spark plug but it still doing it. What can be the cause
@jaywealthmechanics92852 жыл бұрын
Firstly check if the fuel tap is supplying fuel.. then service the carburetor.. the carburetor might have diet
@MoreBlessings-ph6nj8 ай бұрын
What did you mean that the gen does not have compreyour
@muhammadshettima422 жыл бұрын
Pls what could be the issue of a generaor that almost gets shut off and then comes back to normal it does this like every 30min or so
@jaywealthmechanics92852 жыл бұрын
Bad Carburetor could cause it
@muhammadshettima422 жыл бұрын
Is it advisable to change it or clean it
@jaywealthmechanics92852 жыл бұрын
@@muhammadshettima42 change it
@kabirmele Жыл бұрын
I try it but the generator just short notice like a gun. Then i switched off the generator what is the problem?
@jaywealthmechanics9285 Жыл бұрын
Change the plug or the valve.
@solomonayi6683 Жыл бұрын
My fireman generator start but not firing what could be cause
@jaywealthmechanics9285 Жыл бұрын
Check the carburetor or plug
@francisvazquez13Ай бұрын
No tdc setting?🤔
@indeko2408 Жыл бұрын
At what point do change the oil seat
@jaywealthmechanics9285 Жыл бұрын
You change the oil seal when there is leaking of oil.
@matttafakt Жыл бұрын
This is a terrible way to lash valves .. won't last long. Use the proper feeler gauge to adjust valves and torque specifications and make sure your pistons are at top dead center on the compression and exhaust strokes ! Anyway, good luck!
@KsbWills Жыл бұрын
Was about saying this...most people are not aware of tdc and valves should be set on compression stroke with exhaust having a thicker feeler gauge.
@PreciousZabeth-yz5ms6 ай бұрын
Please I need your help o
@PreciousZabeth-yz5ms6 ай бұрын
My generator whenever I on it to power my AC it will shake and off the AC and my generator is 3.8 kvA but whenever I use my friend Generator 2.2kva the AC will work well
@jaywealthmechanics92856 ай бұрын
How many horse power is your AC
@juliusobende1246 Жыл бұрын
Good morning Sir, please my generator do jack and stop immediately. What could be the cause of it Sir? Secondly, it will work for some time, before you know it the plug gets soak with engine oil. If I pull out the plug and clean it, as soon as I insert the plug back to the generator, the generator will work for like a minute and goes off again. What could be the problem?
@jamesabiaka1293 Жыл бұрын
It's smoking right
@jaywealthmechanics9285 Жыл бұрын
The generator needs overhauling.
@AlfonsinaSada11 ай бұрын
Mister klepnya banjir kenapa yaa
@fredyounes12799 ай бұрын
What language is this guy speaking?
@kellingtonsampson59763 ай бұрын
I dont believe this, at first you offed the generator
@jaywealthmechanics92853 ай бұрын
Now you believe
@hondageneratorexperts9 ай бұрын
Aoa dear apka tariqa ghalat hai.
@user-yv2yh5qq6k Жыл бұрын
Sir if i want to set the valve i don't need to remove plug before I set it?