How To Set your Zero-Stop (Helix, Titan & Nexus)

[@transadwens]

Oh, I was seeking for Vector Optics zero-stop tutorial and this is the same construction. Thanks ;)

[@kr6dr]

I have been using a few Helix scopes for a while and think they are outstanding compared to other scopes I have used, but I just started using a Titan scope on my FX Wildcat BT Sniper and I am even more impressed!

[@miga2622]

Wow this scope is simply amazing. Just bought a 400ish dollar hawke scope and im ditching it for the titan.

[@caseG80]

Haven’t used a hawke but I really like the titan. Cheers

[@benstriker4546]

The titan is so darn heavy, you could use it as a baseball bat.

[@sean19]

​@@caseG80 I have a hawke . It's a great scope but however you haven't got the options that you have with the element scopes so that's why I'm also changing to a Helix.

[@jh19811215]

Can you do a video on your SIG range finder, kestrel and element scope working together? When you setup a 100 yard shot, walk through your ballistic calculation and translate to clicks you dial into element scope.

[@georgeforrest6811]

Thanks for the information/demonstration. Heading to my gun dealer who has received a batch of them to try one.

[@sean19]

Thanks for making this informative video

[@frankcross2297]

Thanks, very helpful!

[@tomiliff7591]

Feb 29 is when I placed an order for the Titan I hope it is worth the wait

[@Laulangzuh2014]

Hello! Matt Dubber sir, I have a personal request for you and the company to add scope mounts along with the Element scope for the shooters world wide to minimize their hardships for availing scope mounts at their own. Please please think about it and consider accordingly. Your well wisher from India.

[@thegunmasters8570]

✊

[@laneerwin968]

Just bought a helix I hope it’s what I’m looking for

[@baasjan9488]

I just got mine how is yours?

[@cthatcher85]

Please make that Neoprene cover available for aftermarket purchase.

[@ElementOptics]

We're on it!

[@stevenlee9713]

Great vid Matt , just what I needed to see to help me ☝️☝️☝️

[@MrRockstar1968]

I'm still struggling on which scope to buy? I think it's a shame the Titan doesn't have a parallax starting at 10 yards as I like the fact it has 5-25x MAGNIFICATION RANGE, 34mm TUBE DIAMETER, 56mm OBJECTIVE LENS DIAMETER, 23.2 MRAD ELEVATION and WINDAGE, compared to the NEXUS - 5-20x, 30mm, 50mm, 14.5 MRAD WINDAGE. If only the TITAN parallax began at 10 yards then I probably would have bought one by now. Though also after recently watching footage of a long range shooter explaining how they find SFP preferable due to the FFP crosshair starting off too thin at short range and ending up too thick at long range, they prefer the SFP. So I'm not in two minds between the HELIX and the NEXUS.

[@ElementOptics]

They are both great scopes. I don’t think you will be disappointed with the Helix if you want a SFP scope. Total turret travel is less, but value for money is brilliant.

[@seanhammond4527]

Need a bit of help looking at buying one of these but it’s between this and the Nikko Stirling long range diamond which is better

[@MrRockstar1968]

@@seanhammond4527 would that be the Nikko Stirling long range diamond 4-16x or the 6-24x ?

[@seanhammond4527]

@MrRockstar1968 6 24 mate it's going on a hw100

[@MrRockstar1968]

@@seanhammond4527 Between the Nikko Stirling long range diamond 6-24x and the Element Titan 5-25x there isn't much difference in the field of view. A few differences that do stand out is that the Element Titan is considerably heavier weighing 1105gr, where as the Nikko Stirling is 788gr, that's 318gr difference. Also the Element Titan only has a parallax down to 15 yards yet the Nikko Stirling has a parallax down to to 10 yard. The Element Titan doesn't have the option of a parallax wheel as Element do not manufacture or supply and yet Nikko Stirling do have the option of a parallax wheel. The Element Titan is also a 34mm tube which has less option of scope mounts, where the Nikko Stirling has a 30mm tube with a broader range of scope mount choice. The Element Titan is also a First Focal Plane scope though the Nikko Stirling Long Range seems to be a Second Focal Plane scope from what I can find and would make sense given Nikko Stirling manufacture both the Nikko Stirling Long Range Diamond and the Nikko Stirling Diamond FFP. So depends on whether you want a FFP or SFP scope and also depending on all the other factors I've mentioned. The Nikko Stirling Diamond FFP 6-24x50 which is the first focal plane, this scope has a smaller filed of view which is about 3 to 4 feet less field of view than both the Nikko Stirling Long Range and the Element Titan. There is also the factor that the Nikko Stirling Long Range Diamond is considerably less expensive than the Element Titan by about a third of the price less, and the Nikko Stirling Diamond FFP is about half the price of the Element Titan. Hope this is of some help.

[@naelina2887]

thank you for your video. sorry if I don't write well, I'm French. I am going to buy your titan 3-18x50 and I would like to know where I can find the spirit level on the scop of your video please? Thanks a lot

[@askaritayyib8354]

I am big fan from Pakistan good man

[@micahjdiamond]

I really like that bubble level you have mounted on your scope! Can you please let me know who the manufacturer is, and/or where I can buy it?

[@stephj765RS]

Accuracy 1st. Likely the best scope level on the market. gundigest.com/gun-reviews/gun-accessories/best-scope-level-for-long-range-accuracy/amp

[@stevenslavicek9711]

Still waiting to buy one in Australia ! When do you think we will be able to purchase one?

[@ElementOptics]

Our distributor in Australia hasn’t placed an order yet, they are still deciding on numbers. So it will be a good few weeks at least, possibly longer. Sorry about the wait!

[@johnatkinson3218]

Good vi . .thanks! Is there a way to make sure that the 0 lines up on the turrett INNER dial as well??

[@michiel.]

maybe a stupid question but i notised that the revolution marks dont line up with the zero how do you set a zero and make sure that ist on te bottom of the rev counter

[@soundcrazy9802]

so what is the point of removing turret housing with your hands and then you have a ring where you need to use an key ?

[@mytube3687]

I have a helix 6-24x50 ffp mrad scope. On elevation turret I can adjust the elevation to 42 clicks only it doesn’t go beyond that is this normal? . Or there any adjustment I can make it to adjust more than that?. I am using clicks for adjusting the elevation for my shooting.

[@UberRuthlessOld]

Where I can find such spirit level?

[@seanhammond4527]

Hey Matt looking at one of these but it’s between this and the long range diamond which is better

[@stuartsurkitt2585]

if i set a zero stop on my scope, how do i go beyond one full revolution of the elevation turret?

[@satched]

As you rotate then turret It will lift up past the zero stop pin allowing for more than one revolution

[@Electroal1y]

Patriot Outdoor website still down? I am in the market for a new scope. Delta Stryker HD is high on my list and scope I am leaning towards. Really would like to see pricing on these scopes.

[@clayjensen2892]

Matt were you have used expensive scopes like night force and now are using a Nexus can you tell me what the differences between the expensive night force scope's and the nexus and if they are similar with their optics?

[@920Tactical]

I noticed the black zero stop has a lip, does that go down or up when installing?

[@TTV_kryptic_gaming]

Does the left and right come off too ?

[@fedehuber4486]

Se puede usar en un calibre 270..…?

[@davidricci3101]

My concerns are different. I went in the wrong direction to adjust the height. Then I did it again. I would like to get my turret settings back to factory settings before I zero the rifle again. Can anyone assist? Thank you.

[@joegalea608]

How to set the zero stope? First thing you will have a scope with the turrets turns on both sides the same ...

[@joegalea608]

My helix model the windage turret on one side he can turn about 15 clicks and on the other side he has a lot more clicks... why?

[@andqt]

Does it work on the 2-16x50 olso?

[@baasjan9488]

Mine is out of elevation and im only shooting at 30 yards with a air arms s510 ultimate sporter? What do i do?

[@seanhammond4527]

Think you will need shims mate

[@MrRockstar1968]

Is there any footage of the element scopes showing the focus, the parallax and the crosshair at each stage through the lenses, to show their performance?

[@caseG80]

Ya there’s a bunch on there videos hunting ect

[@MrRockstar1968]

@@caseG80 I've seen a bunch of their videos many times over, but none of them show the focus, the parallax and the crosshair at each stage through the lenses, to show their performance.

[@MikeS1944]

When sighting in my Helix if I move my head slightly in any direction I get a “halo” effect. I have not figured out how to correct this problem. Can you point in the right direction?

[@michedmck]

This is where the parallax adjustment comes in. The numbers on the (left hand) dial are just indications to bring you into the general area. Let's say you're shooting at 30m. Set the parallax for 30m, but then move your head side-to-side or back and forth, whilst adjusting the parallax. Once it's right, you should have a clear, undistorted view of the reticle. Hope this helps!

[@MrRockstar1968]

Why did you state the inside of the turrets are brass, I thought they were meant to be stainless steel?

[@ElementOptics]

The internal parts that move against each other are stainless steel - The only brass part is the center pillar which the grub screws of the zero stop need to bite into.

[@atruckerstail4254]

I’ve just fitted the helix to my impact, am sub12 lbs. my concern is I’m near the bottom of my elevation at 27 yard zeroing. I was planning to use the turrets instead on the reticle out at long distances. So do I shim the scope or so I no limit mounts. I’m pissed off because I just spent £100 on mounts.

[@ElementOptics]

That is unfortunately one of the downsides to shooting with a gun like the Impact with a close zero and a scope that is pretty high above the bore. It is a very common problem with PCPs - The only way around it is to use tilted mounts or a 34mm tube scope. FX is working on this by introducing 20 MOA pic rails to many of their models.

[@atruckerstail4254]

@@ElementOptics cheers for your reply. I’m going to buy some no limit sports match mounts this morning and try and get around the problem. Oh where can I get a cover for my scope?

[@MrRockstar1968]

Shame the HELIX doesn't have illumination.

[@steefsteef1632]

Does this telescope withstand shocks

[@michedmck]

It's able to handle the recoil of a .50 BMG.... hope this helps!

[@karnukarbakarunachalprades1388]

Sir I want to buy ur element po price pls

[@rycwe]

Where can I buy the helix or is it out yet?

[@ElementOptics]

It is available at many dealers worldwide - Just visit our website and find the dealer closest to you:)

[@dewetpuren8044]

When can we buy in S.A?

[@ElementOptics]

The first shipment of Nexus scopes has just arrived and should be available any day now, Helix and Titan are on their way from supplier and should take 3-6 weeks if all goes smoothly (holding thumbs!)

[@Electroal1y]

Matt we love you. But please stop doing videos for your scopes until it's available to purchase here.

[@ElementOptics]

The model used in this video is available.

[@hasangondrongsniper1372]

🔭🔭🔭🔭🦌🦌🦌🦌🦌

[@morfeas1132]

Hi between helix hdlr 2-16x50 SFP and helix 6-24x50 FFP which one you choose?

[@andqt]

Does it work on the 2-16x50 olso?