How to SETUP a "Get Your Pet Right" thermostat / Hygrostat - Cookies Critters - 2020

[@SeanSteggs]

Great Vlog, How do I set up a 24 hour Cycle ? Basking 07:00 - 19:00 (35'c) and a 00:00-07:00 (25'c) and a 19:00-23:59 (25'c) ? When is the ST1 & ST2 recognised/link to the timer ? Heat Projector in A, UVB in B.

[@timothyds7453]

Awesome tutorial. Apparently this exact item is sold by lots of different dealers around the world (I got mine from the Netherlands), all with their own brand name. But, the device is identical. Thanks to this vid I don't have to bother with the rather spartan paper manual. The manufacturer should be paying you for the exposure of their product AND making it easy to use right out of the box ^^ I literally unpacked it 15 min. ago and just set it up while watching and pausing this vid ... and it's now up and running ^^

[@Leeriggs1]

Hey mate. Do you know how to turn the back light on for the control panel? Cheers

[@timothyds7453]

There is a switch on the back of the control panel that you can slide in the 'on/off' position and that's used to control the backlight. It's the only one on the entire device.

[@lorrainesalon8569]

Can I sent the time to ealier in the morning say 530/6 instead of 7am? and also the light goes off at 6pm instead of 7pm even though I am pretty sure its set to go off at 7pm.?

[@sair.velicious]

I’m trying to set up the CHE on the third plug but the time will only go up to 23:59:59 when I set the start time at 19:00:00 am I doing something wrong?

[@CookiesCritters]

If you only want the CHE on at night do the following. Time on = 00:00:00 Time off = 07:00:00 This allows for the midnight to morning. Time on = 19:00:00 Time off = 23:59:59 This covers the night start to mid night.

[@alexanderhellbom1337]

Great instructions! Bought a used one which I installed yesterday. But have problems with it not showing humidity? It only says "--%".. Anyone had the same problem?

[@THEMIGHTYCB]

After 7pm, shows humidity light but Fogger doesn't actually start. How does it keep going 0700-1900 but cover after 1900 to 0700 the next day?

[@petertokes65]

If I m using a heatmat, where should I place the heat probe? I m getting a ball python and I ve come to a stop because I dont know how to set up a thermostat. I set up the timer and the temperatures for the day, tho I didnt quite understand what to do with the "A", can you explain it for me please?

[@beauanderson6199]

How do you turn the backlight for the screen back on? Accidentally turned it off. Thanks.

[@CookiesCritters]

If no display is being showed, it isn’t from something that you have done. Some thermostats have a fuse or a reset button where the lights get plugged into. You could try this first, otherwise I’m concerned that the display may have failed.

[@cookiepieification]

There's a switch at the back

[@CookiesCritters]

@@cookiepieification definitely worth a try, sometimes the resent pin at the back won’t bring the LCD back though.

[@blake_fishing]

Hi! Do you have a link to where I can purchase one of these from?? Thanks!

[@CookiesCritters]

Where are you located. We sell similar thermostats/hydrostats like this.

[@blake_fishing]

@@CookiesCritters I'm located in QLD on the Gold Coast

[@CookiesCritters]

@@blake_fishing if you want to flick me a message on FB. The link is in the description of this video. I’m happy to help

[@selahattindagli1939]

Hi mate, my female bearded dragon is around year 1 year and a half and I'm wondering which month do I change the temperature to drop. I'm located at Sydney and im noticing she always pretty much goes to the cool area. My temperature on the hot side is 30deg and basking is around 38 Cool side around 27 degrees. I do put her in the sun in the morning for an hour if that helps. She stop basking starting from this month. Is it because she gets all her heat from the morning sun . Thanks mate

[@CookiesCritters]

Hi mate. This time of year, bearded dragons will start to brumate. When they start to cool they will spend most of their time in their hide or on the cool side. Do you measure your basking spot with an infrared temperature gun?

[@selahattindagli1939]

@@CookiesCritters yes I do mate. Is the basking temp 38 to hot ?

[@CookiesCritters]

@@selahattindagli1939 38 is on the low end. Their basking spot can go up to 42-45 degrees. 36-38 degrees is where bearded dragons metabolise food.

[@selahattindagli1939]

@@CookiesCritters and the hot part of the side of the enclosure, 30 degrees enough?

[@CookiesCritters]

@@selahattindagli1939 we aim for a 26-30 degree cool side, 35 degree warm side and 42-45 degree basking spot.

[@rampantreptiles8818]

Hi! Can you run 3 tanks off that one thermostat if all 3 tanks have the same type of reptile in there. I have a 3 bay enclosure and just trying to figure out how to set my thermostats up so there aren’t wires everywhere so it looks a bit neater and isn’t so confusing. Ive been told you can sometimes run 3 tanks of the one thermostat if all tanks have the same requirements?

[@CookiesCritters]

Hi Sophie. If you are using 1 thermostat for a 3 bay enclosure there will be inconsistencies with the temperature gradient. For example, if you have the probe in the middle enclosure it will be spot on but the enclosure above will be hotter and the enclosure below will be cooler. This is created by 2 factors: 1. The light in the lowest enclosure will radiate heat upwards affecting the enclosure above. Same with the middle enclosure light radiating heat into the top enclosure. 2. The room has its own temperature gradient with the cool air being down low and the hot air rising We recommend 1 thermostat for each enclosure.

[@rampantreptiles8818]

@@CookiesCritters Thank you! Thats what i was concerned about 😁

[@CookiesCritters]

@@rampantreptiles8818 no worries. Happy to help.

[@lol-rv6uc]

Hi there, it only shows set2and 3 of each channel I set and I have no idea to get it back. I tried setting the first one 7am, second one 7pm then rest of them 7pm. It showed set 1 and 2 again but I am worried is it gonna turn on at 7pm next day and off at 7pm another day which is 24 hours and never get back to 7am?

[@CookiesCritters]

If you are concerned that you have set it up wrong. You can disconnect the power and remove and reinstall the battery in the LCD display. That will wipe the memory and you can start again.

[@lol-rv6uc]

@@CookiesCritters I fixed it. Now it's just the humidity rise crazily at midnight which goes to 60.

[@CookiesCritters]

@@lol-rv6uc what do you have plugged into your humidity socket?

[@lol-rv6uc]

@@CookiesCritters there is nothing in the humidity socket. The humidity is usually 34-45 in the day but it rises to 60 at 9-10pm and sometimes midnight.

[@lol-rv6uc]

I removed the water bowl ages ago.

[@msquared016]

Mine is showing an error in the humidity reading, it's displaying an LL and its flashing, anyone experienced this?

[@spoonsounds9576]

Means humidity is very low, would recommend spraying misty water around the tank as it boosts the humidity back up for a while