How to setup and use Eachine TX03 3-in-1 FPV Transmitter and Camera

[@doh3541]

Thank you. Just needed to be reminded how to change power, bands, and channels. You are the best.

[@lorenzoisrael6619]

Not sure if anyone cares at all but I just hacked my girl friends Instagram password by using Instaplekt. You can find it by Googling if you wanna try it yourself

[@ReplicateReality]

the end was exactly what i was looking for when i clicked the video thanks, imma watch more

[@robojax]

You are welcome. I am glad you found it useful..

[@longboardlouie5816]

Excellent instructional video! I was able to learn more in that short time than many other videos I've watched , Thank you very much.

[@robojax]

you are welcome.

[@thercbat]

Thanks for making this video! Was very helpful.

[@bigmannick2]

Thank you for making this video friend, it helped me with my own setup. Keep up the good work.

[@robojax]

good to hear that. You are welcome.

[@seeithappen1]

Very good information for use with building your own drone. Thanks for uploading.

[@lyleposadas2727]

This was very useful

[@V_channel_]

Thanks for this helpful video, Robojax! 👍

[@robojax]

You are welcome.

[@Tony-ow3if]

Great!! Very Imformative thanks !!

[@robojax]

Glad it was helpful!

[@johnthompson4848]

Excellent presentation of your video as I'm not the sharpest knife in the drawer, I was able to get it right on my first try. Will be asking you for more help in the future for sure thank you!!

[@myknowledge5253]

Thank u so much to explain how it works I thought that if we switch on the fpv it will directly connect to camera but u showed that it directly won’t connect.please in next video please can u tell how to connect and uses the camera off eachine and how to use fpv of eachine which we wear on our eyes or WiFi googles

[@robojax]

this is only working on FPV with 5.8GHZ which is not on wifi.

[@JamesKing2understandinglife]

Thank you for helping me with my tiny camera system. Aug 24, 2019

[@robojax]

you are welcome.

[@MessingWithCode]

Grerat video thanks a lot

[@jeremyheng8573]

Thanks for sharing

[@robojax]

My pleasure

[@bormaier6102]

How much power does the camera use and how long can you use it with a 1000mah battery

[@fa300ry]

What is the best way to install this camera on the plane ?

[@samberr.y]

Great, informative and helpful video.

[@robojax]

Thank you

[@caman1628]

hi i have some questions which monitor you think i need for those cameras ? and which is better Eachine TX01 or Eachine TX06 or Eachine TX02 i buy it in aliexpress because only those camera send to my country (which camera will go 500 meter do you think?) and what do i need for the fpv system to work on rc plane? hope you will answer because im noob at this hobby and i want to fly fpv

[@robojax]

just search for FPv monitor here on AliExpress www.aliexpress.com/wholesale?&SearchText=FPV+monitor

[@robojax]

? no reply? I spent time to search and made link for you so you click and find it, and you just left it like that?

[@gran4404]

Does your camera heat up when you use it? I'm using a 3.7v 500mAh battery and on the 200mW setting the camera gets really hot, almost burning me. I'm gonna try to reduce power output to 25mW if that will help it

[@robojax]

Yes it does. it is getting hot and it should run for very short period. Or just lower the power.

[@aviislive9101]

Thaks bro

[@ricardotaveira7197]

obrigado, pela explicação.

[@MikeRM399]

hey Robojax what power i have to set the camera to get the best long range of it or what band?thanks

[@robojax]

The larger number, is the more power and longer distance.

[@BorderlineStrength]

sir, what is the model of your fpv display or monitor?

[@robojax]

It is called Diversity LCD with Receiver RX-LCD5802

[@hakbak5186]

Please, I need your help, I have this camera and I don't know how to connect it with four wires

[@robojax]

We have ground and + for power. We have composite video out and perhaps you got microphone out.

[@sailesh4951]

Does it have to be a Eachine googled or lcd to display or any branded googled works?

[@robojax]

it works with any FPV display. FPV has special receiver where it receives the video.

[@familyman8644]

How do you know when you have the best channel or band? This works with rotg02?

[@robojax]

I would have to test it. I am not sure.

[@Valde006]

Pode conectar uma bateria de 3.7V na tx02?

[@robojax]

Assisti ao vídeo para responder sua pergunta. funciona de 2.2V a 5V. Acabei de adicionar legenda em português para que você possa entender. Saudações do Canadá.

[@nicandrotorreon4034]

Hello robojax. What type of plug it can be combatible with a battery

[@robojax]

The cable to connect it to battery is JST-DS LOSI see it here snag.gy/myogLf.jpg

[@cio-_mhai6699]

..robojax i have a question.?,can i use that camera to my android phone using EACHINE ROTG.?,

[@robojax]

no.. check my other video. Search for "android" in my channel.

[@garybailey2720]

Very nice video, you have been very helpful. I have a question concerning the battery. I have a 3.7 1s 600mah will that work fine or do I need a 3.7 250mah. Thanks for your help.

[@robojax]

This camera needs very little current (or power) comparing to the drone. It can work with your battery no problem, and any battery 2.2 V to 5.5V.

[@howtomakeanddo6979]

Can we use this camera in computers

[@robojax]

If you watch the video, you will see that you need 5.8GhZ receiver to receive the video. You will need this www.ebay.ca/itm/202152205339 to receive video. If you use regular (www.ebay.ca/sch/i.html?_osacat=0&_odkw=boscam+fpv+receiver&_from=R40&_trksid=m570.l1313&_nkw=boscam+rc+832&_sacat=0) type of video receiver, then you will have the video output. which composite video like VCR (old 1990s) quality with yellow RCA jack (snag.gy/yT671H.jpg). So if you computer has composite port with RCA jack, then yes you can view it on computer but you need RCA input. This device has RCA input for computer www.amazon.ca/dp/B072KRZQVF

[@Paxl3y]

will it over drain the lipo battery and ruin it?

[@robojax]

yes it will. you need to have lipo buzzer like this kzbin.info/www/bejne/d2Gom3eqfLiYptk

[@defhubris]

Can i put it on my neighbore cr?

[@victorbeauchamp5511]

How do we decide which power setting to use?

[@robojax]

start with lowest and if it works for you (you can see better video), then good. if not, increase it.

[@skillradius9867]

It works for any fpv reciever????

[@robojax]

Yes any 5.8GHZ receiver.

[@johnbrown2072]

yes

[@adityashukla6767]

Can i Use Jst plug to power this camera???

[@robojax]

The connector is: JST-DS LOSI . See the battery here www.ebay.ca/itm/281689872538

[@farmeralex22]

do you need an extension cable or anything for the battery?

[@lakshyagaynar7520]

Can i use a 2s lipo with it?

[@robojax]

no you can't . Operating voltage is 2.2 to 5V. So anything above 5V will kill it. 2S is 7.4V.

[@RodisOne]

If you use a 5 volt regulator you can. Otherwise it will get fried.

[@mohemahmoude3356]

sir I am new,can i use it with eachine vr800 goggles without any extra tools

[@robojax]

I just checked VR800 and it has 5GHz receiver with antenna. so yes you can use. Just power up this camera and it will start sending video and your goggle will receive it.

[@mohemahmoude3356]

​@@robojax thank you sir ,and one more question ,can i use all the TX02-3-5 camera with vr800 if so how can i decide if this camera suitable or not (sure without extra tool) and how can i know the range of the camera i mean how far i can fly with my airplane sir thank you again

[@foellerd]

Why do these cameras have a zero transmission option. Its not like it really turns the system completely off right, its still blinks and drains power? If thats the case I don't see the point of that option. Doesn't bother me, interesting talking point.

[@petfrogg]

My LCD does not blink through the three phases of showing Band, Channel and Power. It just shows a 0 and nothing is sent to my googles...can I reset it somehow?

[@petfrogg]

dunno but after fiddling I got it working!!!! Thank for the inspiration

[@robojax]

You are welcome.

[@juansmusic858]

Would it can be powered with any Lipo battery?

[@robojax]

It needs very little power. Yes you can power it as long as the voltage is not above the limit which I have explained in the video.

[@juansmusic858]

@@robojax thanks, but my battery has a jst connector will it connect to the fpv camera

[@robojax]

You can solder your own connect on the battery and the camera.

[@PilotDroneRC]

Where is the transmitter located?

[@robojax]

the back side is all traqnsmitter. Camera is at the front.

[@jlchulilla]

My tx03 shows an horizontally mirrored image when showed on an android smartphone using a Eachine ROTG02 receiver. Do you people know any solution for that? Thanks!

[@robojax]

this is not from camera. You have to change settings on your monitor or goggle.

[@jlchulilla]

Robojax hey, thanks. Precisely, changing the microusb smartphone for a usb C one un-mirrored the image, although I don’t understand why

[@jlchulilla]

actually the problem was related with ROTG02 and it is not controllable. It appears also with USB C smartphone. Any advice?

[@jatinsingh2276]

What about range of the camera?

[@robojax]

we never talk about range. you mean distance?

[@jatinsingh2276]

@@robojax yes distance

[@rezaulkabir3287]

What will it be cost?

[@robojax]

The link is in the description. Always check description of the video.

[@minhaznabil8786]

please tell me the price of this camera in bangladesh?

[@robojax]

I purchased it from eBay.com or AliExpress.com

[@Wuzzapy]

1:41 where can I buy that cable?

[@robojax]

I had to watch the video, do eBay and Amazon search. You will need to make with using two connector: 1- www.ebay.ca/itm/10Pcs-Mini-Micro-PH-2-0mm-JST-2-Pin-Male-Connector-Plug-Wires-Cables-200mm-HK/223292054305 2- www.amazon.ca/dp/B079PL6KQ7

[@cerezokarlanthony4138]

what will i use battery?

[@robojax]

because of your comment, I had to watch the video and sure enough I saw that I have explained it. Please watch the video.

[@mehedihasan-xh4en]

what is this camera price?

[@robojax]

the price is changing check eBay or AliExpress or Banggood

[@furulevi]

Try to avoid Interlaced videos! :)

[@robojax]

All videos are recorded and encoded in non-interlaced format. but viewing from another screen in the recorded video has the issue.

[@autome4374]

Black wire is + red wire is Gnd ,thé camera is off am I wrong in wiring???

[@anthony3D]

👍👍👍😃

[@SiddeshChoudhary]

can I transmit audio with the same?

[@robojax]

no. it can't. There is no microphone with this camera.

[@SiddeshChoudhary]

Thank you for replying. Can you please tell me can I connect wifi camera to eachine E010 drone over wifi to my android mobile without fpv goggles. here is the link: www.banggood.com/Eachine-E55-RC-Quadcopter-Spare-Parts-0_3MP-Camera-With-WiFi-Receiver-p-1142806.html

[@robojax]

I have not used the item you sent me the link for. But I have got a video for Android Camera Transmitter kzbin.info/www/bejne/a6rKloWPdpejbas

[@SiddeshChoudhary]

I saw your video and i will try with it. thank you for your time :)

[@miakhalifa3671]

how far we can put camera

[@robojax]

Are you talking the distance of signal? maximum 30 meters in direct line of sight.

[@chamdaracay3122]

@@robojax any oder way to increase the meter can reach?

[@DeepakKumar-ef7dt]

I can buy this camera pleas give me ₹?

[@robojax]

go to eBay and search for TX03 and you will find it.

[@pawneep20]

My cam isn’t transmitting

[@robojax]

If wiring and power is okay, then it is broken or dead

[@myknowledge5253]

I mean vr

[@mehedihasan-xh4en]

what is this camera price?

[@robojax]

the price is changing check eBay or AliExpress or Banggood