How to Setup Inverter with SolarGo

SolarGo is for commissioning of GoodWe grid-tied inverters. Currently, you can use SolarGo to do commissioning for GoodWe grid-tied inverters DSS, DNS, SDT G2, SMT, MT and HT series. With or without LCD is no longer a concern for using SolarGo.

[@mooner84one]

I have GW6KDT inverter in my on grid solar system. I configured it in my solar go app, but when I try to connect it, wrong PASSWORD message appears. It's GPRS based inverter.

[@katakouzina]

try: 12345678 or admin

[@bodytechnic]

Can I use SolarGo on Goodwe 5048EM with Pylontech UP5000 battery?

[@ludocassys]

AC is off and you can still setup the inverter. This means you can only setup the inverter while the sun is out (daylight) and not in the dark (night) ? Correct ?

[@katakouzina]

i am not sure i understand your question, but i am only able to connect to inverters' wifi during sun.

[@maikovandeneynde4747]

battry is not zeroing wich settings to use?

[@linitara]

If the inverter has WiFi module, I assume that I can monitoring my solar system by sems portal?

[@katakouzina]

yes. though not all settings are the same between the two apps.

[@sangtranminh5117]

How to increase the Vac setpoint protection. With GW3000-NS and GW5000-NS. Thank you

[@katakouzina]

may i ask what is vap setpoint?

[@nhanleduy1624]

How to config %Power Limit by app with GW3000-NS Please!

[@GoodWeSolarAcademy]

gotcha that

[@GoodWeSolarAcademy]

You can short press the button on the inverter's creen to find the "Power Limit Off", then long press to turn this on and short press to set the power limit percentage. For detailed instruction, please refer to the user manual of NS&DNS series user manual.(en.goodwe.com/downloads.asp)