How to Setup the Tascam DR-40 | (Step by Step Tutorial)

[@rdtaguestudios]

Not really "...every menu...walk thru entire process..." when on the 1st menu settings you state, "I don't even know what it does. Just turn it off." Just because you may not know what low cut filters do, doesn't mean it's not applicable to others.

[@MarceloPinto-fw5sw]

Basically he understands that the DR 40 is used in weddings

[@daliasantiago3867]

You don’t need that...don’t know what that does...😂😂🤣

[@reeseg.6766]

I'm a Film student and my professor was so completely vague on how the hell this works. Best video ever, complete life saver.

[@invi_carlos]

Thank you so much for making this video. I feel much more confident going into filming my first wedding!

[@drstew1]

Hey man just want to say thank you for this video. I bought this same device the menu doesn’t have the same as yours . But it’s funny because it appears you did video 5 years ago and in tech land thats yonks ( Ages) but still this recorder was made well and sound is incredible…

[@indigodeep6609]

Line level is for guitar cables and any other quarter inch cables like keyboard left and right or even mixer output etc. mic is XLR mic calbles with the 3 pins. Basically if you have the end that looks like a guitar cable plugged into the hole, use line, if you have the circular mic cable with 3 pins, use mic.

[@ImAPCTech]

Correct, that is an input selector, not a level selection.

[@danzai]

hey thanks, i didn't even realise you could plug a guitar jack into this thing, I thought the hole was for XLR only, but lo-and behold, you can! game changer! thanks!

[@liveshotsvideoproductions]

Tip; Auto Record (when switched on) means that the device will start recording as soon as it gets an input signal above the threshold you set. In theory, you can leave it on standby and it will trigger the recording function when the band starts playing or someone starts talking. I've got the function on my DR-70 but I don't trust it, just don't think the 'convenience' is worth the risk.

[@moltchanoph]

When I start recording with my Tascam DR-7X, it's recorded for only 7sec., Why is it so? Thank you for your time.

[@ekphotography]

I wish you would have gone oversaw to stop recording properly. I had an experience a while back where if I did not press stop to stop recording, it would just pause then continue recording on the same track which was a nightmare in post as my files from different takes were all on one long audio track. You have to press stop, I was accidentally pressing the record button again which was actually pausing the recording. Just a heads up for everybody.

[@dontjumpunit4318]

Thanks !! I am an old guy. I grew up with much simpler devices; like volume, tone and record. I HATE reading instruction manuals and always try to fumble through it. You made the introduction to the Tascam very easy; so thanks for that.

[@tylerherrinton]

You're welcome! I'm glad you found it helpful!

[@paulwooton4390]

@@tylerherrinton great video! My date is stuck on jan 1, 2018. I can change it, then it defaults right back. Never has worked. Thanks for the excellent explanation on everything else!

[@royvandeborne326]

Can you show how the XLR is connected to the speaker? I'm stressing out about how to connect them together.

[@t33nyplaysp0p]

Next time just take 10 mins to talk to a sound engineer (who are always present at weddings) what these functions do. Auto-record is super neat. You set the threshold of volume for it to start auto recording at. That way you don't have to run over (or forget) to hit the record button when somebody starts speaking

[@visualthoughtsproductions9936]

Made my life easier and thank you for being so direct about everything. Wonderful and informative.

[@FosterMedia]

I just received this device and have aNTG2, i need to be at like 80 input to get to around -8db, is that normal?

[@tylerherrinton]

It’s definitely not abnormal. As long as you aren’t getting a ton of noise you should be fine!

[@FosterMedia]

@@tylerherrinton I found it far better and louder with phantom on, as opposed to a brand new aa battery. Ni-ca batters were not as good in the ntg2 as they only have 1.2v, a fresh all battery with 1.5 was better, but phantom power was the best. Thanks

[@motavision]

Nice! I have a question? My Tascam 40X Records but after an hour or so it doesn't record audio on the card, its blank. Before I used to record over 2 hours straight without any problem. Is there a reset or a special setting I to know about? I'm using the external XLR input.

[@mheadstate21]

Clarification on the side Line is for quarter inch cable, Mic is for xlr cable that doesn't require phantom power like off a mixing board, Mic Phantom is for microphones that require Phantom power

[@Jake12399]

Thanks, but can it record dual external mics? A Safety track of External 1 and 2 on both the left and the right? Otherwise, it's better to get the DR-10X or two of them. lol

[@nerdtendoplus195]

Cool cool!

[@urosjandric]

Hi, I have probelm with sync drift about 8 frames for a 30 minutes of recording. I use GH4. Does anybody has the same problem as me?

[@djnamelessnyc]

Is the dual recording will it give you a louder mix cause that’s basically my only problem with recording is making it much louder im a dj and doing post production sucks when all i need is more umph in loudness

[@Danietz]

How do I get the tascam to recognize my mic when Im using it as an audio interface? I made sure that the source was the bottom left xlr jack but it refuses to pick up

[@danielvalenzuelaguitar]

Tyler: "I don't know what Initialize does" Also Tyler: "Sometimes it will reset the settings, I don't know why" Thanks for the great video, just a short tip back: Initialize actually does not format the card, but all the settings back to factory settings. Hope that helps too! :)

[@FrankDiNardi]

Shit don’t have have, EXT IN 1! I have EXT IN L, EXT INDEP, EXT IN L/R. What do I use?

[@danzai]

Under Rec Mode:: Source, I don't have the "EXP INDEP" options.. That option is just not there on my Tascam DR-40. What gives? * Update * I updated the firmware, and all those extra settings appeared. It's worth leaving this comment here in case anyone else has the same issue.

[@Mary2020Jane]

Happily used Tascam DR-40 for years. Then this morning a perplexing problem with XLR cable. Was a brand new monoprice XLR cable, and the first time I plugged it into the DR-40 it became stuck. Never happened with my previous XLR cables, of different brands. I read the likely problem: there's an open notch/hold on my monoprice XLR that is used when I connect it to the Tascam and this opening then ensures the XLR gets locked onto Tascam. But then I can't get the Tascam to release it. Anyone else have this experience? This was an older DR-40, so not sure if it's any different with newer ones. And I'm pretty sure the reason is that hole/notch in the monoprice XLR connector. Is there such a think as locked vs unlocked versions of XLRs?

[@aksharacreations6611]

I would like to connect DR-40 to Nikon D-750. Please suggest the cable that I need to buy for connecting from DR-40 to DSLR. Thanks

[@svetlinburgudzhiev2235]

Thank you for the effort to help me and everyone understands how to set up the TASCAM! One question, what is XRI Mode? The tree options that are under it are OFF, ON, and ON+GPS; should I leave it off?

[@jefferson.castillo]

Im shooting a short film. Im going to run a rode ntg 8 on channel 1. On channel to can I run a xlr splitter for rode go 2 and record an additional left and right or will it just be mono?

[@danzai]

Thanks, still slightly confused though. I want to use this with two lavalier XLR mics. Which will plug into two ports. If I choose Mono, it only records one of them, if I choose Stereo, it seems like it will record one lav mic on the left track and one on the right track.. which isn't what I want.. So I have to use 'dual', which creates two sound files at different levels? It seems like this is the option I have to choose.. ?

[@Ibibiogal]

Why call the video a 'Step by Step' tutorial when you literally skip steps because you don't use it for your work? The recent thumbs down is from me. I'm also asking KZbin never to recommend your clickbait useless tutorials then I'm going to go and read the manual.

[@johnkemas7344]

I have this same recorder but haven't used it for a while. When I put it in record mode I hit the record button for second time but it will only record for about 5-6 seconds then goes back into standby mode. Driving me nuts!! Any suggestions?

[@gcprost]

Mic level is for dynamic mics. Phantom power is for condenser mics.

[@dalemettee1147]

Tyler, also I forgot to tell you that back then, there was no sound tech, i was it. Had to place all the mic's and mix them myself. So, the preacher had a mic, the couple had mics at the kneeling pads and if anyone else wanted to speak, a mic had to be available. So, I was busy, plus afterward, I had to out of there before the next event. What a rush!

[@authortimwickenden]

If you’re going to do a video explaining how a product works you need to know your subject - some helpful stuff but not very professional, sorry!

[@HipHopJunkyRadioShow]

I wonder how you get rid of ALL OF THE AIR once you recorded?

[@UrbaNSpiel]

I lost a setting and I can’t find it. Trying to see if it can block out my ac noise.

[@imagesoneandmany]

bought a couple years ago and even with ;manual never could figure out how to actually get this to record so it went in a storage box and I use my trusted applications on my phone. Dolby has a great app for smartphones and you don't need to have the waste of money on this.

[@marius.ardereanu]

with a correct level of recording , the recording sounds to low .why ?i only take the signal from the musicians` mixer

[@GilProdLLC]

Excellent

[@tylerherrinton]

Thanks!

[@kevinjack5184]

Thanks! I've had this thing for a year and now know how to use it - almost. Can I use an adapter and plug a lav mic in?

[@tylerherrinton]

Awesome, glad it was helpful! I've never tried that but theoretically you could get a 1/8-1/4 inch adapter and use a lav mic? worth a shot!

[@ivanica23]

I don't usually comment on KZbin, but this video helped in so many ways.

[@marknye51.thefixitguy]

How well would this work for Motovlogging..?? I want to set up a moto vlog for my goldwing.

[@GusBRASMR]

KSJKASJKAJSKAJSKAJKAJS DJ VERY CRAZYYYYYY

[@KevonialJemonathoy]

Bought 2 sd cards. Both don’t work. This should be the whole video

[@skiphupp6387]

My recorder breaks one long audio into multiple files even though I have it on 2g

[@endrizo]

mics can be flipped in or out but can they stay in the middle both facing front ? thanks

[@Pe11ePD]

I'm still stunned that no one found out about difference in noise level between 44.1/48 and 96khz recordings. I tested it several times in the completely quiet room, and 96khz has a slightly softer noise and less hiss = a bit less noisy overall. You will not hear the difference unless you are recording a quieter ambient like living room, nature, etc.

[@devanwoodruff7289]

Yeah, 96khz is great for ambient sound. I love this little device

[@Pe11ePD]

@@devanwoodruff7289 DR40 is great, but mostly for outdoor recordings, phenomenal audio. I found that interior recordings, like rooms, offices etc, will produce very pronounced echo.

[@devanwoodruff7289]

@@Pe11ePD for sure. I hardly ever use the built-in mic, but its nice for certain circumstances

[@4144758]

Shoot, I mostly use the built in mic that's great to know, the noise floor sometimes bothers me. Be sure to use one of those $25 24db preamp booster adapter on those dynamic mics

[@DuckMany]

Does this work with the Tascam DR-40x to?

[@real_Nadventures]

good but you didn't tell me how in REC menu to move right and change the setting.

[@JozzyPOPProductions]

When i do a play back , it sounds echoing ….

[@rowbyrowby]

The absolute best Tascam DM 40 tutorial on KZbin. Thanks!

[@pjpj1517]

Bro ..one question Can i charge Tascam with my phone adapter and plug to wall plug for charging Tascam DR-40

[@tylerherrinton]

No unfortunately it can't be run on USB power. It only takes AA batteries so it's not rechargeable.

[@CloudCraftStudios]

Track Inc. is for Incremental recording, saves multiple files over time in case the unit dies or the files corrupt. Very very useful!

[@singerreid4624]

Yes and it doesn't stop the recording or even slightly pauses it

[@NoodyProd]

Hi thanks for the tips ! But How to record simultaneously the DR40 stereo mic on a track (ambient) + an external mic on an other track ? while keeping the input levels settings independent ? Thanks

[@OpenbaarVervoer2D]

Selecting 4 channel mode and selecting independent

[@robertcowellsuperstar]

Just found this and this is THE MOST INFORMATIVE TASCAM DR40X TUTORIAL I have found. Exemplary.

[@tylerherrinton]

Haha well thank you!

[@porfformelyn9851]

Heyo I have the newest tascam linear pcm n i still dont know how to transfer audio to computer using usb because everytime i plug it in, nothing comes up on my laptop, if you know how to do it much appreciated :)

[@tylerherrinton]

It would probably be easier to just get a SD card reader haha. But I think the recorder needs to be turned on to transfer? Not sure honestly I've never tried!

[@baldeagle242]

Thanks for sharing. 🦅🇺🇸

[@vlingres]

Do you use the limiter or the peak reduction functions ?

[@Protegit]

Can I record 4 mono mics simultaneously with this recorder?

[@tylerherrinton]

No unfortunately. It only has 2 inputs. You can record 4 tracks from 2 sources but not 4 tracks from 2 sources

[@Protegit]

@@tylerherrinton Arent the inputs stereo?

[@fileyigit]

can i use my tascam dr40 for streaming on twitch ?

[@TheSpotboyfilms]

Why does it only take 2GB card. I couldn't find a firmware update- is there a way to make it accept greater GB?

[@tylerherrinton]

Hmm good question. I use bigger cards in mine with no issues!

[@fullcirclegla]

Super tutorial, in depth and easy to follow.

[@adtobbi2005]

niet echt geholpen bro. 3 uit de 5 sterren. maar je lijkt wel een aardig persoon. kusjes

[@AbdullahNLM]

thank you so much man for the video. just bouaht a used recorder. thanks once again.

[@tylerherrinton]

You're welcome! Thanks for watching!

[@jellymixxtvonlineproductions]

hi there Tyler l really love your tutorial video, you nailed it,

[@samliske1482]

Thank you so much. Just got my tascam and I was dreading going through the slow and meandering tutorials-this was quick and concise!

[@63MacGuy]

Great video! on my screen on the right side it says SPEED & EFFECT. I have EFFECT turned off

[@heintzreckons]

Major error right off the bat. the machine adjusts to mic / line difference.

[@tylerherrinton]

What do you mean? There is a physical switch on the side to choose?

[@trop1calfilm]

Thank you sir! I've had this recorder for a while and every time I plugged it in to the dj speaker or system I always end up with a bunch of mumbling noise in the background lol🤦‍♀ I just found out why, because I didn't set my source right, and all the videos I watched on YT didn't explain that clearly. So, thank you!

[@ilikedesk]

hi mate i've lost the usb lead for mine and not sure which one it is to get a replacement, do you know?

[@tylerherrinton]

I think any USB cord should work!

[@eitanmam924]

how do i connect it to a mixer to record a live band?

[@lets_get_it]

You should of explained how to turn it on.

[@Vampbloodskii]

WHY IS YOR SCREEN YELLOW MNE IS BLUE ISH

[@kevinjack5184]

Time stamps would be great

[@NevinXavier]

thank you so much bro

[@Carmen-Ray]

THANKS A LOT FOR ALL THIS INFORMATIONS

[@awillingvessel238]

we need an update!

[@curt_on_wh33lz]

Asante sana..you helpes

[@bearzproduction]

thank you🙏

[@bruceciccarelli6118]

Thanks - I needed this video. I’m going to use one from a friend to do a live band recording for a demo and really don’t want to read through pages and pages of manual.

[@ericsanimeshorts]

Nice One

[@ChandraSGanne]

Thank you very much, now I'm able to record clean audio with this tutorial, although I have 40X.

[@kevinjack5184]

I need to record nature sounds with mine

[@njbestvideo5977]

Well done

[@missygordon]

Thank you!

[@photofather1]

thanks

[@NelsonStJames]

Great starter tutorial, and a must watch for newbies to the Tascam as the manual gives you next to nothing on operations and settings.

[@TimWhyman]

Thank you so much😊

[@4144758]

Awesomeness this thing confuses me

[@roybell4387]

You still don’t know

[@liveshotsvideoproductions]

6:25 assuming it's the same as Windows; 'Quick Format' just wipes the list of recordings and makes the SD ready for re-writing, the files can be recovered with special software. 'Full Format' actually deletes the data and defines the file-system type (FAT or FAT32). 'Initialize' is for new SD cards; does a full format and installs a system file. Both Full Format and Initialize only need to be done on an SD card new to the Tascam.

[@kuttychattan1]

Great.... one of the best tutorials ....thank you so much.

[@tylerherrinton]

Glad it was helpful!

[@beatstar]

I brought this into the Empire State Building and they confiscated it because they thought it was a taser. They gave it back to me, but man oh man was that an experience I won't soon forget.

[@corkcamden9878]

A bit overblown.

[@AnthonyVideoMinistry]

Thank you 😊!!

[@Stefanosinf]

wondering if the DR-40X firmware can be installed on the DR-40....

[@tylerthecreative]

BIG Thanks!!

[@kimiweintraub1866]

Hi! Thanks so much! What a great video! Question: I am using this recorder to film commercials at home with the Sennheiser MKE600. Is there any reason I need to record in Dual mode or can I use mono? What is the benefit? I am an audio beginner

[@luisguerra217]

JAJAJAJA wooooorst tutorial EVER!

[@tylerherrinton]

Well that's a bit rude.

[@wtpaige]

thank you!