If you need more help, join our Facebook Group today! facebook.com/groups/tplinkmy
@faizulazri7524 жыл бұрын
Nak connect kat device hitam ke putih ni?
@mozuka51294 жыл бұрын
In the first few minutes of this video we were asked to connect the main unit to the router..but in the app and in the guide, it ask us to connect the main unit directly to the modem..Which is correct?..are both ways correct?
@mozuka51294 жыл бұрын
@@jackysew262 ..I just followed the video to the tee..and it worked at first try..😊
@fazillahfaizanharithsufi62434 жыл бұрын
Nk guna tplink lama atau unifi
@salemmarzuke94404 жыл бұрын
Hi TP Link team, i just install the Deco M4 like ths video for double terrace hse.. so may i know main deco at living hall i put 1 n other 1 1st floor hallway, so if im stay at room 1st floor, is it internet connected direct from 1st floor or from g floor? Pls advise...
@goranpjevac72343 жыл бұрын
I do not believe the improvement this brought to a home WiFi. Bedroom was hovering around 8-10 Mbits, with frequent disconnections (being at the end of an apartment). I've placed main Deco in the living room, second one in kid's room (in the middle of the apartment), and the third one in the bedroom. Bedroom speed is 70+ Mbits! I am amazed! Excellent product!
@jackysew2624 жыл бұрын
For those who may still having problem after following the video. Here is my experience. 1) Use the PDF guide it is clearer. Unlike this video at 1:14 , it is saying "We already done the wiring in the previous steps" (Which is NOT specific & confusing), The PDF wrote "IGNORE this step", which is much clearer. 2) Secondly, you MUST use the black router provided by UNFI. Turn your router around, the router model MUST BE AC1200. Don't be like me, I was using a third-party router that is not provided by UNFI. Since the guide DID NOT say we can't use third-party router, GG. I wasted HOURS figuring the problems. Good luck there guys. Hope this helps.
@adamzikri49964 жыл бұрын
Okay now i understand why you were confused, sorry for my previous reply, glad you found your way around it
@ironvip4 жыл бұрын
Thank you for this comment. Now at least i know I am not stupid.... The idea of having one router plugged in to another the whole time next to each other was so riddiculous to me that I thought I am doing something wrong the whole time.. i thought with two M4s I will be able to cover the whole house, but now its clear it wont be the case without buying next devices. I am not going to spend a cent more for this shit...
@serennabee4 жыл бұрын
hieee. i am using the old unifi modem Alcatel-Lucent-I240G and i already connected the LAN cable from the modem to my deco e4 but i still can't seem to get any wifi. HELPPPPPPPPPPPPPP T_T
@jianjunwong82054 жыл бұрын
@@serennabee if connected directly to modem, the setup is different than shown in this video one
@sharonng64713 жыл бұрын
Your comment helped! Thank you so much
@virgiliu_life3 жыл бұрын
Thank you very much! Works great! My problem was that at the end I could'n connect to internet, but now it's solved. I was connecting my media converter and then ethernet cable inserted in deco, but in the end was not working. Your video solved the problem! From media converter to the existing gigabit router, then ethernet cable from router to deco. Than fallow app on phone and solved! Thank you again!
@_ELzY_4 жыл бұрын
Remember when they said it was easy. It’s funny how people can’t take a joke
@pritamsetty84 жыл бұрын
It is easy
@TPLinkMalaysia14 жыл бұрын
Do send us a PM on our Facebook page if you face any difficulties.
@_ELzY_4 жыл бұрын
TP-Link Malaysia no no i worked it out now
@jackysew2624 жыл бұрын
@@TPLinkMalaysia1 Ya right. "PM" us.. For days I am still pending to join the group. Please don't expect us not be able to use Internet for days".
@adamzikri49964 жыл бұрын
jacky sew bro these are some basic stuff, if youre not able to do this you might as well just not use a phone
@izwandywan57614 жыл бұрын
Received mine yesterday,love it..now i can get strong wifi signal near kitchen :) thanks tplink deco m4..my current sub package is 100mbps,before installing my speed is around 80-90mbps.finally after using deco m4 my speed is around 150mbps👍🏻👏🏻
@aimann74374 жыл бұрын
what is your max speed you can get?
@kimfailimlim71584 жыл бұрын
do u play mobile legends?
@izwandywan57614 жыл бұрын
Aimann 110-150mbps 😊
@izwandywan57614 жыл бұрын
kimfailim lim I don’t but my relative play mobile legend,im just playing call on duty mobile
@nazrinothman24004 жыл бұрын
Adakah setup sama macam dalam video ni? Sebelum ni berapa pakai? Modem & router ke? Or modem saja? Sbb saya kat rumah pakai modem & router tm provide tp kalau saya pakai ni adakah router lama tak pakai lagi?
@benz_putraАй бұрын
Easy to installed. Follow the steps, and for me it takes less than 10min. I was here on 05 September 2024 🇸🇬
@coaljig29033 жыл бұрын
Thanks for this video guide TP-Link Malaysia. it's straightforward and simple enough to understand and follow. cheers!
@mohdshukor3 жыл бұрын
Easy and well done guidelines setup! Superb unifi + tp-link product!
@kyrafiffyfluff54553 жыл бұрын
I think it is better for TM/TPlink to put a guideline/link to this video in the box. The TPlink app asked us to turn off the existing router and connect the LAN cable directly from modem into the main Deco. It is contradict & confusing.
@drzacks3 жыл бұрын
Exactly, i wasted my time figuring out their written instruction and video at time it said router and modem at another place.
@SuzannaJuwita4 жыл бұрын
Apparently for unifi users, when setting up the main unit, we need to connect directly to router, not modem. Not as the instruction in the app/manual. Which brings me to my question, do i need to ensure my first unit is continously connected to my router, then setup the second (and subsequent) unit(s) wirelessly?
@TPLinkMalaysia14 жыл бұрын
Please connect the main unit to the wireless router as Malaysia ISPs require special conditions unlike global ISPs.
@hanreussing9183 жыл бұрын
I have the same problem as you, have you fixed it yet??
@leeda74802 жыл бұрын
No wonder it kept disonnecting. I followed as in modem. Ok tq2
@netster2 жыл бұрын
@@TPLinkMalaysia1 damn! That’s sucks! No wonder ummm
@rorymcgrath89163 жыл бұрын
Does the main one have to be beside the Wi-Fi router or can you connect it and move it to wherever you want afterwards?
@karenpimentel630911 ай бұрын
Thank you for helping me connect my router 🎉 specific , fast and easy👍
@ShereneTan3 жыл бұрын
Very stress, failed to set up although follow all.the step, call hotline no body pick up, request to sent technician to set up.....
@ajaybangi4 жыл бұрын
can i connect both deco units thru wifi & not thru LAN cable?
@Carmidian3 жыл бұрын
Why do I have to create another Wi-Fi name as well as password? I just want to make it boost the one I already have down the other end of the house. It has power and an ethernet cable
@larryy6467 Жыл бұрын
You could just get a extender 😊
@SantomPh10 ай бұрын
You have to disable the original modem/router's wifi and use it in bridging mode
@KiSS_190.5_North_Bay2 ай бұрын
Just name it the same wifi name and password of your original wifi!
@sohce3 жыл бұрын
The video will be better if you showed the option of connecting directly to modem. But then again, the option of Modem-Router-Deco also works. It’s just that we will need more plug points
@agumontaichi4223 жыл бұрын
I also wonder the same..as for now, i use Modem>Router>Deco..but my wifi has two connections now, the old one (from router) n the new one (from deco)..if possible, i dont want to use the router anymore as the deco is enough already..so u still using ur router?
@sohce3 жыл бұрын
I am currently not using my router. I connect my modem directly to deco. So I only have 1 Wi-Fi connection instead of 2. I can switch between 2.4 and 5 using the app. But connecting it to modem directly requires me to connect to PPPOE and therefore I need to get a PPPOE password from Unifi, my local internet provider. The downside of using this method is I can’t use deco as access point though.
@victoriawest10272 жыл бұрын
Do I have to keep the deco connected to the router lan:? So I can't ever place the other decos everywhere in the house because it must always be connected to the router and lan
@sohce2 жыл бұрын
@@victoriawest1027 if not mistaken, one of the deco has to be connected to router/modem directly. Other decos don’t need to be connected to router.
@alifaiman191411 ай бұрын
@@sohcein term of Internet traffic , would it be better connected direct to modem or existing unifi router
@MrNornizamyusof3 жыл бұрын
My house is just next door from my father's home where the Unifi router is located. At the moment i just pulling the 15m ethernet cat 6 cable from the router to my PC at my house. Can i buy this DECO M4 and plug to the ethernet cat 6 cable ive pulled earlier and setup as per shown in this video?
@areksachanel64244 жыл бұрын
Kalau ta pake kabel LAN... apa kah bisa ke sambung ke modem???
@garudaeagle40772 жыл бұрын
Tq.. so complicated at first .. who has problem actually something has missing in this toturial..
@chuansiow0073 жыл бұрын
my M4 always showing red light LED , is it pro with the M4 ??
@asyrafmus4 жыл бұрын
I'm using 300mbps unifi but after successfully setup the Deco M4, the speed I'm getting only less then 100mbps. Help please?
@yakuzakasaima3 жыл бұрын
@NekoNii? to increase the coverage? i guess..?
@cychuanyong7473 жыл бұрын
mine too the speed i get is around 50% or even less
@derrickjr9923 жыл бұрын
Hi, the instruction said connect with modem but your vid shows different. Mana nak follow? If pakai router, i terus saje boleh pakai tanpa M4. So what crap unifi bagi free?
@eveyjd3 жыл бұрын
I received this unit from TM after upgrading my Unifi package. TM upgraded my modem. Setting up the unit to modem didn't work, the mesh cannot find the internet. It only work when connect from router. The setup guides is confusing. Modem or Router?? Pls clarify. Tq
@mawar_kasturi3 жыл бұрын
Did they come and install it for you? How is it now
@chiaty86422 жыл бұрын
Same problem. The apps instruction misleading us. Do not connect the deco to modem, but to connect to rounter instead.
@RayMak3 жыл бұрын
I like this
@jelopiepio23 жыл бұрын
Bruh, you are everywhere
@trollin41763 жыл бұрын
Wow cant believe that your here XD
@Forklore213 жыл бұрын
He is everywhere lol
@tubewongaming10603 жыл бұрын
How are you here????
@iqbal._3 жыл бұрын
if you see him everywhere, you are everywhere too
@thaniisnaaidu92954 жыл бұрын
Thank you so much.Now I can play ps4 peacefully without lagging
@azhadahlami4 жыл бұрын
Same bro 😂 What games u play?
@thaniisnaaidu92953 жыл бұрын
@@azhadahlami fortnite fifa 19 nfs payback Mainly:rocket league
@azhadahlami3 жыл бұрын
@@thaniisnaaidu9295 lets play nfs payback tgthr soon? Add my psn up: azhad7
@rafie63103 жыл бұрын
Stable without disconnecting? Are this mesh support 5g ?
@daaniesa86723 жыл бұрын
@@rafie6310 yeah they're dual band so they have 2.4ghz and 5ghz connection
@wenwei8750 Жыл бұрын
the main mesh must cable with the router? can I use only one mesh without cable with the router?
@bigbrainson2673 Жыл бұрын
For the first deco can put place it anywhere after I connect it with my router? For example after I connect it I place it inside my bedroom without the router
@TPLinkMalaysia1 Жыл бұрын
The main Deco must be connected to the Internet source with an Ethernet LAN cable
@aquaventus4 жыл бұрын
this is a guide to set your m4 as a wifi ap, should work with any isp as long as you have a router that connects to the modem in the middle, or if you want to create a different mesh network, then also still need to connect to switch/router, important thing to do is to turn off the router's wifi, which they didn't mention at all here not a guide on how to setup unifi to work on m4
@sweetcandy2ful4 жыл бұрын
how to turn off router wifi?
@aquaventus4 жыл бұрын
@@sweetcandy2ful login to router, click on wireless, tick off the box next to wireless radio, best to do this on a computer connected via ethernet this will turn off wireless signal from the router, only do this if you are certain you don't want to use the router for wireless connection
@mawar_kasturi3 жыл бұрын
@@aquaventus Does this mean I'm using the wifi from the main mesh, if I turn off the router?
@aquaventus3 жыл бұрын
@@mawar_kasturi the router would be the one connecting you to the internet, it routes your traffic to the modem, if you turn the router off you wont have any internet connection my original comment is to turn off the wifi from the router so it doesnt conflict with the wifi from the mesh only if you connect your mesh network to your router like the video shows (mesh>router>modem), if you use the mesh directly as a router then you dont have to turn the wifi off (mesh as router>modem)
@Megalonsheru4 жыл бұрын
I just got it today by promotion and it works well... Does this mean that I am able to have more than 2 deco??
@jianjunwong82054 жыл бұрын
Yes, and any model of deco can work together
@chesie113 жыл бұрын
Hi, just a question, what will happen if i reboot my deco mesh? Are those devices that were connected will be deleted?
@ketgutz54752 жыл бұрын
can the lan cable be removed after setting up? or it must be connected all the time?
@victoriawest10272 жыл бұрын
This is also my issue !!! I removed it to place the mesh somewhere else and now it won't connect anymore when I plugged it back in
@Randomvideosmh4 жыл бұрын
I can't get it to work, everytime I'm connecting to my WiFi, the deco light is red and no connection. What is the problem?
@galaxymini3023 жыл бұрын
@Lunatrics :D Hi, so when you use, you have to remain all three router, modem and deco on?
@CaptainWarfare-cj8is3 жыл бұрын
@@galaxymini302 Yes, everything must be turned on and connected.
@vivekgupta29109 ай бұрын
Can i use 2 pieces for one network in mother child config and 3rd one for another network as Mother and extender independently.
@atdream1053 жыл бұрын
Solid. Can't connect Internet during set up. What is the correct setting, dynamic IP or PPoe? I chose ppoe because that was the connection setting with previous router
@ItsMe-yc7ck3 жыл бұрын
This Deco are available for all unifi package?... Even unifi lite?
@talia81713 жыл бұрын
does deco have to be plugged in with this black charger look alike while using everytime?
@jimmanhart3516 Жыл бұрын
Great guide and easy to understand. I saw another video which used parts of this video but also added to change the original IP provided wireless router to Bridge Mode. This video, which I am assuming is TP Link Official, does not say to change the router to bridge mode. Is this needed or can I skip that step.
@thirusullan3926 Жыл бұрын
Can the main device placed somewhere else once its done setting up?
@jeffreychen31014 жыл бұрын
Hi, i just connected successfully to T p-link Deco M4 through the Unifi router. How do i disconnect the unifi wifi so that it doesn’t appear in the search?
@bharathansivabalan51914 жыл бұрын
Go to your router link. 192.168.0.1, under section wireless..disable the 2.4 n 5ghz.
@mohdazam28514 жыл бұрын
mine asking for Admin password.. is there any password?
@Orcishihi4 жыл бұрын
@@mohdazam2851 try admin
@jhaycabunocjr72852 жыл бұрын
it is ok to unplug the main deco?? and place to another area? without ethernet cord???
@lian54613 жыл бұрын
Bro connect the router or the modem. U say router here then the app say modem...
@farhanmizra3 жыл бұрын
I have the exact question.
@nirhaber61493 жыл бұрын
Are most mesh systems used with an existing router? Please answer, TP Link 🙏
@afiq3583 жыл бұрын
Not really. Some do like asus with their ai mesh system.
@SonicHacki3 жыл бұрын
I keep having problems with the Deco M4 dropping speed all the way till 0.01Mbps even when I'm beside the Deco, also using unifi and followed this step. What's going on?
@1.N.Decent3 жыл бұрын
You could reconfigure the thing with help from Wifi Analyzer android app.
@mikahhakim51553 жыл бұрын
now i;m stuck at "power off your modem" which one is the modem? the one with unifi logo or the one with fiberhome logo?..this is not plu and play..easy to say but damn so hard to install
@kabby24113 жыл бұрын
The one in the video is router(unifi logo) the one that is connected to ur house cable and optic fibre is your modem
@mikahhakim51553 жыл бұрын
@@kabby2411 tq sir
@baharmusachannel Жыл бұрын
hi.. I am a tp link user, the only thing I don't understand is, to change the setting from 2.4Ghz to 5Ghz for mesh tplink. options in deco ssid application, 2.4Ghz & 5Ghz 2.4Ghz only 5Ghz only. when I change to 5Ghz only, the wifi signal is lost. and I get a low speed, and I can't connect to the second deco m4. it gets disconnected easily.
@mna8691 Жыл бұрын
hi what kind of LAN Cable is that? is that CAT5e cable? my original M4 cable is broken, going to buy new one
@YangYoon935 ай бұрын
suggest cat6 above
@PotatoChixMoMo Жыл бұрын
Plz help. Im conected using Tm Unifi. From modem to router, from router to mesh wifi....but i get better internet instead of using tp link mesh wifi. Why?
@dawdaw26293 жыл бұрын
do i need to set it up at the place i need to place it or i can set it up at any places?
@dgyta4 ай бұрын
How if i want to connect LAN cable to my device ? From router or mesh device ?
@paminadiaipad34993 жыл бұрын
Thank you @TP-Link Malaysia, very easy to install
@Shan-wb5nf4 жыл бұрын
To be clear the deco that we connect through LAN to the modem always stays with the modem right? We cant relocate it once done with the setup?
@manuelalejandroo5804 жыл бұрын
Shan Always stay connected with the main router .
@azhadahlami4 жыл бұрын
Yup. The 2nd unit you can relocate
@denisedx Жыл бұрын
Can the main deco be moved after it’s been connected to a different room
@stephenmead72962 жыл бұрын
Hello can I ask if these will help with my speed and latency,my Blink cctv cameras struggle with my setup you see. Thank you 👍
@sawamura78833 жыл бұрын
Is it possible to connect without the lan cable. Because my wifi is in our living room. And our bedroom is upstairs
@ibraheemsaed79334 жыл бұрын
can I connect both pieces wirelessly or I need to connect one of them to the main router ? thanks
@Shan-wb5nf4 жыл бұрын
Bro did you find out? 😅
@manuelalejandroo5804 жыл бұрын
Shan You need to connect the main router to one of the mesh after that all the mesh can be connected wirelessly.
@yazidjaafar4 жыл бұрын
@@manuelalejandroo580 I had tp-link wifi6 router with four external antenna. So wifi devices will connects to the wifi router or to the main mesh wifi unit?
@maryelferrero72794 жыл бұрын
Help! Both decos are successfully set up but when I connect to them, it says "connected, no internet" How do i fix this?
@azhadahlami4 жыл бұрын
It means you plugged the mesh to the modem .u need to plug it in your router.. The black thingy.. At the back it says ethernet. Not lan which is on your modem
@PrinceAzeemPlatinum3 жыл бұрын
Thanks @@azhadahlami
@fifizalika85143 жыл бұрын
@@azhadahlami thank youuuu
@galaxymini3023 жыл бұрын
It kept saying my deco is offline…I thought everything is easy
@maxhowaixhun58393 жыл бұрын
Same here whats going on
@mohamadedzhan9 ай бұрын
basically, this mean the main mesh act as the primary router with new ssid for another mesh, then can use same ssid for all the mesh. with mean, got 2 ssid, 1 from unifi black router, and this mesh is new ssid...?
@vicky.editz.4 ай бұрын
Yes
@likjou3 жыл бұрын
Can I SSH into the device because I see an open port on port 22. If yes what is the default credentials??
@Toggymok3 жыл бұрын
THESE UNITS DO NOT ALLOW YOU TO SELECT YOUR 5G OR 2.4 GIG CHANNEL. DO NOT BUY IF YOU WANT TO BE FORCED TO USE CHANNEL 44 on 5 GH. THEY CONFLICT with Australia's Telstra Gen 2 WiFi on channel 44. I have buyer's remorse!
@OrareEt3 жыл бұрын
Bruh that's why its a mesh wifi it only acts like a router but its not
@totosetiawan50184 жыл бұрын
Thanks for the video.. I managed to connect deco m4 with existing unify router. However the old network before I used deco is still active and I can connect to that old network. I thought once a new network being created with deco the old network would be deactivated but it is not. How to make the old network deactivated ?
@ahmdikrm4 жыл бұрын
Go to your old router’s ip, and then switch off the wifi there. Thats what i did so it wont bother my mesh wifi signal
@izwandywan57614 жыл бұрын
Kena buat manually bro,gi setting router turn off wifi both 2.4-5ghz..sebab deco m4 dah support both 2.4-5ghz...then baru lah connect ke TP-Link Deco M4
@nazrinothman24004 жыл бұрын
Izwandy wan kat mana nak buat setting manual?
@izwandywan57614 жыл бұрын
NAZRIN OTHMAN tengok bawah router yg tm bagi tu,cth “205.168.1.1” kat browser.isi username dan password..dkt dlm tu blh disable wifi router lama
@sendoh7x4 жыл бұрын
Seriously igtkn extend original wifi je..tp kena setup network lain pulak 🤦♂️
@rennuke2 жыл бұрын
Lampu indicator dekat atas jer..siapalaa bijak sgt design..last2 kene baringkan br nmpk lampu nyala kaler apa..
@amed.ismail2 жыл бұрын
Meaning to say TM router always ON with the deco? Thanks
@dnyl.mp43 жыл бұрын
do this have to be open 24/7
@k.medivironalamjaya62134 жыл бұрын
Can this device provide internet remotely? Meaning if you take your 2nd deco to another house/location, can it still connect?
@TPLinkMalaysia14 жыл бұрын
Cannot Sir, it doesn't work that way.
@nikazlin41644 жыл бұрын
Gud question...i had been informed that i can bring it anyway...as long as that placed have internet connection and i remember the password😭
@raidisoleh36204 жыл бұрын
Bruh i dont think so
@raidisoleh36204 жыл бұрын
@@nikazlin4164 they meant in your own house?
@jesteralfonso84092 жыл бұрын
I avail Deco M4 and follow the instruction! It's connected but the light stayed red and cannot use the internet?.
@andifitriani762 жыл бұрын
You need to reset the deco - Look at the bottom of the deco cylinder and find the small hole (Reset). Get a small pin and simply insert the pin into the reset hole and it should work fine.
@jesteralfonso84092 жыл бұрын
Oh ok Thank you very much! I will do it right away.
@93SupaFly3 жыл бұрын
Hello, i have a question. if I place one E4 beside my router as the main node, then 2nd node in different room / level, DOES the wifi also limited to 100mbps, because of the first node connected via ethernet to my router, which E4 limitations are 100mbps via the port ? so it is why i better get deco M4 ?
@yeahyusuf73 жыл бұрын
Yes. E1 is limited only 100mpbs
@airalakwatsera12183 жыл бұрын
Why when we put our new name for the wifi it becomes red color? Whats the problem?
@ijopotzgenio34423 жыл бұрын
Can this be reset if i transfer house and get a nee wifi from a different wifi provider?
@timsavvy3 жыл бұрын
Good Content! What if you connnect this to a fast TP-Link AC Router? Will that Router be part of the mesh assuming that you use the same AP name? Or will the Router act as a wifi range extender (different MAC id) and not part of the Mesh? TIA! 😊
@OrareEt3 жыл бұрын
Same Result bro
@abdulrhafiqmahzan82722 жыл бұрын
Hi, deco e4 sesuai ke utk 100mbps? Atau akan ada limitation speed nanti?
@agumontaichi4223 жыл бұрын
The instructions are confusing, the guidelines at the 1st page show the Deco connect to unifi router (black) while the router connect to TM's modem (white)..then on page 5, it said disconnect old router (the unifi's router) n connect the Deco to modem..so which one is correct? As for now i ignore the instruction to remove the old router, n just connect the deco to router instead of to modem..but my wifi got two connections now, one is my old wifi connection n another one is from my deco..can someone tell me, if i disconnect the router from modem, then connect the deco to modem directly, will it got no problem?
@dnyl.mp43 жыл бұрын
do the wifi only has one even with two deco m4?
@vgg88073 жыл бұрын
Is it really necessary to DL the app or can i just skip that?
@calamitywall3 жыл бұрын
Do I have to connect the mesh to the existing router? Can I connect the mesh to the UNIFI BTU Directly?
@shahidaibrahim82953 жыл бұрын
Subscribe to 100mbps but slow. Got speed between 45-60mpbs only. After buy mesh wifi. I got my speed that i was supposed to get which is 100mbps. I thought this mesh wifi help to booster my current wifi mybe up to 150-200mbps. After 1 day used.. speed got only below 60mbps and almost 10 mbps. help me, why?
@zzhkszz3 жыл бұрын
Hi,i just bought this product, i have a problem which is i successfully added main deco, but when i try to add 2nd deco, the whole process is exactly same as your video, but after i click “i done for now” the 2nd deco straight away disconnected and cant connect ,and just blink red
@reynaldobirog962 жыл бұрын
As for me Deco M4 did not work since it is very slow. My pldt fiber is 100Mbps while Deco M4 directly connected through cable reada only 10-15 Mbps or even less. For 6 months until now it is not working,,,very hard to get technical assistance
@christianjunetubera6654 жыл бұрын
How to configure if I just want my Deco's to act as an Access Point only because I already have a dedicated router?
@TPLinkMalaysia14 жыл бұрын
Once you finish the setup process, you can change it to access point mode in the Deco app.
@christianjunetubera6654 жыл бұрын
@@TPLinkMalaysia1 thanks!
@ajiseloo4 жыл бұрын
@@TPLinkMalaysia1 what is the difference between deco as main router that sit beside unifi black router to access point? When i change the router setting means all my electronic devices need to do reconnection? Like my 6x units cctv etc?
@MegaDenden1234 жыл бұрын
Quick question, I use ethernet connection for my desktop computer. Will the app detect the connection on the device list in parental controls?
@sijianliaw28463 жыл бұрын
I just got this product today with the new unifi plan. But I think 300mbps is already enough and unifi in my area is quite OK, no need mesh wifi. Can I sell this product to anyone who also subscribe to unifi 300mbps plan? Or I just leave it aside... Hope for reply...
@jennieteddybead5533 жыл бұрын
help me why my deco’s light is color white and red not blue
@miyae243 жыл бұрын
Mine just arrived. I only put on the main Deco M4 to power. Do i need to use another one too? Both?
@amiryusuf37914 жыл бұрын
Just wondering, why is the setup shown in the app is so different from what is shown here, for example, the app ask u to connect to MODEM, while this setup video is clearly show to connect to your ROUTER.?!!
@nickyan28804 жыл бұрын
amir haizad exactly bro. I tried mine connect to modem unsuccessful everytime & the lights turn red
@amiryusuf37914 жыл бұрын
@@nickyan2880 mee tooo, kinda frustrating tbh
@TPLinkMalaysia14 жыл бұрын
Hello Guys, if you wish to direct to modem, you will need to call TM to obtain the PPPOE username and password for setup. This is why we recommend our customer connect to the existing router instead.
@syigloo4 жыл бұрын
TP-Link Malaysia TM kata tambah RM15 sebulan utk service Mesh Wifi ni diorg yg install!
@rudyludinata71464 жыл бұрын
Mia Damai tidak. Kita kena install sendiri ketika saya register haritu. Jadi buat sendiri akhirnya.
@Leeya284 жыл бұрын
I use unifi lite - modem ZTE ZXHN H267A. Took me hours to set up because I chose the connection type as PPPoE (and it was confirmed by unifi people when I contacted them through live chat). After numerous reset, I chose Dynamic IP and voila; it’s connected. The speed isn’t that good though. Before mesh - 3.03Mbps. After mesh - 4.21Mbps. Lol where did I go wrong?
@zuhairymy4 жыл бұрын
After connect n configure deco wifi network, there will be 2nd ssid added up after unifi ssid am i right? Or should i disable wifi from existing unifi wifi router or rename it same to deco?
@ellisbarnes47613 жыл бұрын
Wha did you do please?
@mariaj9may3 жыл бұрын
Hi! Can we setup the second deco at the next floor of our office? Thank you.
@pdas93763 жыл бұрын
Use the apps. And then press add new deco. And select ur deco. It will auto pair with the first deco unit
@mariaj9may3 жыл бұрын
@@pdas9376 even if it will be placed outside the triangle layout?
@interviewer10683 жыл бұрын
After the set up, can I extend the lan wire and place the deco to other room?
@OrareEt3 жыл бұрын
Yes
@dansonong40734 жыл бұрын
How does it works? The 2nd unit of Deco M4 act as wifi repeater or amplifier? I was using TP powerline adapter & connect via LAN Cable but it recently stopped working, maybe something wrong with the power line, does Deco M4 works the same way like powerline adapter? Thinking to get it but worry it might not work with the power line status in my house.
@myjpkl3 жыл бұрын
How do i set my time/clock on Deco.. I use parental control to block 10pm+7am ... and the blocking took effect mid of afternoon 3pm. My kids missed their online class...
@coeurblanc49994 жыл бұрын
Does it mean that the home will have 2 wife networks? 1 is the main router’s wifi, another 1 is from mesh (emitted from mesh). In order to enjoy the mesh’s wide coverage, i have to disconnected from the main router’s wifi
@edwinekasumaputra79003 жыл бұрын
Hi tp link ive been wondering where can i buy the power strip ? it looks amazing and ive been trying to search for it
@nightfury201014 жыл бұрын
Can we have legacy web GUI setting or cli support in next update? Mobile app control only is painful.
@AMJ.553 жыл бұрын
baru je install deco m4, connected level atas kat 2nd unit mesh.. internet lagi slow compare dgn direct connect dgn modem wifi kat tingkat bawah.. rugi plak langgan RM15/month for 2 years woiiii...
@linakaseh36543 жыл бұрын
ya ke. bru smpai brg ni.
@ahmadmuhammadjohari883 жыл бұрын
@@linakaseh3654 baru update firmware yg terkini.. still lagi masih dpt latency spike setiap 10 saat.. sy check speed dlm game tu yg bole nmpk latency (ms).. hope so dorg update firmware baru.. and sy dah order cable lan cat7 utk connect main mesh dgn router..
@drzacks3 жыл бұрын
Ya yang untung unifi dan tplink
@ahmadmuhammadjohari883 жыл бұрын
@@drzacks last2 sy beli cable cat7 dgn cat8 cucuk router to mesh1, mesh2 to pc.. baru sedap dapat max 100mbps.. rasanya beli kat shopee terus lebih berbaloi daripada beli bayar bulanan rm15 kat unifi. barang sama
@0ninns4 жыл бұрын
Thanks very fast and easy user friendly guide
@anasaziz97503 жыл бұрын
Somebody please help me, why can I register my account at tp link?. It said already sent a message to my email but I didn't receive any of it
@mohamadzulkarnain489 Жыл бұрын
How to setup if the router already link to the modem ??
@congcong934 жыл бұрын
Hi tplink, can I put my second router in my room then connect lan cable to my desktop PC?
@TPLinkMalaysia14 жыл бұрын
Hello there, both LAN ports on the mesh node can be used to connect LAN cable to PC.
@zeuslink1868 Жыл бұрын
sorry to tell you that still no network pls advice thanks