How to setup your dig quad for the first time!

In this video I show you how to setup your Quin LED Dig Quad. Same process is used for the Dig uno.
WS2812B 5v LED Strips 5 meters 60 led/meter IP65 - amzn.to/3Ubtzh0
WS2811 12V RGB 12mm pixels - amzn.to/3UoAjsi
5v Power supply - amzn.to/3u3raKS
12v Power supply amzn.to/3GOKe7k
Diffuser channels 1 meter - amzn.to/3EGIBpk
Diffuser channels 2 meter - amzn.to/3XEq45J
Junction box - amzn.to/3VosbbS
Solderless butt connectors - amzn.to/3VbtGKV
18AWG 3 conductor wire - amzn.to/3GNme4g
18AWG 2 conductor wire - amzn.to/3VbSz9t
Cable Gland Joints - amzn.to/3AP3iyl
Dig quad controller - quinled.info/p...
Song: Lensko - Let's Go! [NCS Release]Music provided by NoCopyrightSoundsFree Download/Stream: ncs.io/letsgoWa... • Lensko - Let's Go! | H...
Dreams by bensound
www.bensound.com
IG: @drift_dad_official

[@Random-rt5ec]

Excellent video - For me the most challenging part was finding a project/junction box that didn’t break the bank and looked good.

[@nitroedge]

great vid and nice and new! Mine arrives tomorrow and thanks for taking the time to shoot this vid and share, greets from Canada!

[@DIYD_Do_It_Yourself_Dad]

Awesome! Good luck and have fun!

[@captainsage2444]

Thank you!

[@marcusunivers]

Is it possible to use 2 types of powersupplies with the Dig-Quad v3? Because I want to run a 24V and a 5V LED Strip at the same time but I dont wanna buy 2 ESP32s

[@canalemersonmendes2023]

Acompanhado aqui

[@jsodeman1]

Very helpful. Thank you very much for the information. One question, how do I know which GPIO are the correct numbers?

[@DIYD_Do_It_Yourself_Dad]

Go to quinled.info/quinled-dig-quad-pinout-guide/

[@DIYD_Do_It_Yourself_Dad]

Led1 is 16, led2 is 3, led3 is 1, and led4 is 4

[@fatbomb7832]

I bought some led TM1814 puck lights. I have been unable use them with my WS2811 controller. Will the Dig controllers work with them?

[@DIYD_Do_It_Yourself_Dad]

WLED does have an option for TM1814 however I have never used those types of lights.

[@dale3645]

Dude, at what point did you plug your ESP32 back into the board???

[@DIYD_Do_It_Yourself_Dad]

I like to wait until after I setup the wifi, but you can probably go ahead once the software is loaded.

[@davidfleck1654]

Do you need a computer to set it up or can it be done from an iphone. I just ordered one but did not get the cable.

[@DIYD_Do_It_Yourself_Dad]

I think the newer ones come preloaded with the latest software so it’s probably possible to do the rest with your phone.

[@davidfleck1654]

Thank you we will see in a few days @@DIYD_Do_It_Yourself_Dad

[@DIYD_Do_It_Yourself_Dad]

@@davidfleck1654 yeah try powering it up and checking your phone for the wifi signal.

[@scotprice8553]

how many pixels/strands of lights can you control with the dig quad?

[@DIYD_Do_It_Yourself_Dad]

Website says 1500+. I have 1800 on one of mine with no issues at all.

[@TheMrclean2006]

How do you connect pixels to the dig quad?

[@DIYD_Do_It_Yourself_Dad]

You can find that info here kzbin.info/www/bejne/m3ibiH6Id5qGfcU

[@Unleashed75]

Considering this title says how to set up the dig-quad for the first time, I only got to see the quad once and even then it was just the top part. Magically it was wired up to leds and power. This was more of a video about wled and didn't cover the dig-quad at all. I appreciate your time but the title is misleading

[@niagaravdub]

One bit of constructive criticism, please have a consistent volume level. Having the audio go from whisper levels to screaming levels constantly makes this unwatchable. Was the information good? No clue, I refused finish it because I was sick of having to turn the volume up and down and up and down.

[@seanemclean]

Dude, shut up.

[@healyfamily1323]

Ok, boomer. I didn’t have that problem at all. Great video. Thank you for the nice slow step by step that I needed.

[@niagaravdub]

@@healyfamily1323 is a good thing that no one asked you. Pretty boomer of yourself always assuming everything is meant for you.