You purged the yellow line by pressing the schrader valve at the manifold, but isn't there air in the blue line also? Shouldn't that be purged also, and if so, how?

Did you turn the car on before you started to fill? About to try this on my truck

Thank you much brother man!! My Massimo Warrior wouldn't idle after 8 months in storage. After this video, I found the problem and fixed my mini bike. Thank you ❤😂😊

i wouldnt even bother hooking up the high side. you're just asking for the valve to leak again.

Thank you! I have oil on my spark plugs, seeing this video affirms that I can do this myself.

Cuánto se cobra x el trabajo

Yepper that’s the ticket. It cleared my vehicle right out 30 minutes

I ignore every counter offer and let it sit. For those who get a counter offer, REFUSE EVERY SINGLE ONE. You aren't legally obligated to buy the car for anything more than your bid.

Thanks man 👍

For some reason my 2010 Highlander doesn’t have that button in the glove box. It’s just a flat piece of plastic. Nothing that says on or off. Is there a A different location in mine?

So its easier than the 2wd?

You not concerned that the cheap flywheel will blow apart

This video is well done. I followed your steps to the "T" to charge a friend's AC, and everything went perfectly. Thank you!!

if you try farting hard in there (or i can help you out) the cig smell will be gone

I've checked those things. It sounds and acts like it wants to engage, but then won't actually open. Any other ideas?? Please and thanks!

Good news lmao. I bought the test pipes. And we lowkey almost sound the same. I'm running the same exhaust as u, but I have the stainless z1 y-pipe and the test pipes.

You did a really nice job explaining this. Someone mentioned adding PAG. That is incorrect. Note to others, you do not put PAG in when recharging the system. It must be added when the pump is replaced or a line ruptured and oil leaked out. If that is the case, the system must drained first and the correct amount replaced. Adding PAG to a system with enough oil will tax the compressor shortening its life. It will also not be as cold.

Why didn't I see this video 3 months ago could have saved $220 . Exact reason I bought a new one.

I have the exact same car (2012), color, and it's lowered. I'm changing the front end along with the rear coil over suspension. Beautiful car!

Might get a 2013 m37x rwd, 29k miles they asking about 19500

this work with the weed smell too?

Great video and full transparency!! Do you have a video about How to register Copart car ? What is the process and steps?

Thank you for this video. I must have accidentally pressed the button when cleaning the interior of my car. Phew… 😅 here i thought some thing broke

Excelente video, Gracias a tu video puedo hacer este trabajo en mi infinit M37s, si llego a tener algún problema( espero que no) le preguntaré 🙋🏻‍♂️ acá en su canal para alguna Orientación, gracias 🙏🏻

Update - House caught on fire because of using cheap non-UL lights from China.

I appreciate the video. Like the person below, I pulled the carb off a couple of weeks ago and could not remember the metal gasket placement. I, too, tried cleaning it but the seal for the bowl would not seal and it was dumping gas everywhere, so, I bought another carb. Curious as to why you omitted the original metal gasket. Thanks to your video, I should have it back together in a little bit. My engine is for a tiller. same engine, different purpose. :

Thank you! Easiest fix I've ever done!

Thank you for the video, I have a few cars on the boat now. Do you know how long it took to clear customs once landed?

You have no idea what u doing

Very much appreciated

Thanks

Excellent video - For me the most challenging part was finding a project/junction box that didn’t break the bank and looked good.

I did this but the cigarettes smell returned..... should I do it for a longer period of time?

I didn’t see the first motor mount get taken off ?? 🤨

Thank you for video!

After 10 years this finally fixed my truck! Thank you.

In 2015 I bought a 2012 Infiniti M 37 with about 78,000 miles. I’ve been driving it every day for the last 12 years with about 170 thousand miles now of hard driving. Other than oil change and tire rotations I have never had any work done thank God. Every time I wash it it looks brand new and even after 170 thousand miles it runs like the day I bought it. Not sure how long would this party go on but I intend to keep driving it as long as possible. couldn’t be happier with my car. The only other car I loved as much was my 1999 Lexus GS 400. I had 265 miles on it and it was still running like a champ till I sold it since I rarely drove it and the battery kept dying. I had a GS350 2009 model but I was not happy with its interior fit and finish and I had traded that in for my 2012 M37 and I think that was a great trade. i’m thinking of buying a 2018 Tesla model S 75D as my second car and hoping I’ll have as good luck with it as I did with my Infiniti.

Awesome video

My remote only has the rear window opener . There is no button in the glove box. There also is no button on the dash control panel on the left of the steering wheel. I still can't get it open. Any ideas?

I will add its easier just to pull tje condenser and radiator out as well only 2 more bolts on the condenser holding the lines in

I'm husband is replacing it right now but he said it looks small it doesn't reach where the other one was, I don't know but he's having a hard time.

Did you do any paper work at the port office or was it all done before hand at a CBP office?

Didn’t work still not working

You need to know about fees before bidding. Also and most importantly go inspect the car before the auction. You cant test drive but can start it and bring a flashlite to look at damage.

thanks for sharing !!! i need to try this! bought a used vehicle and they had masked the smell.. it’s summer time and it’s smells so bad… my eyes are always irritated. i hope this works for me!

So you just pull the lines out u don't need a special tool?

Is it possible to use 2 types of powersupplies with the Dig-Quad v3? Because I want to run a 24V and a 5V LED Strip at the same time but I dont wanna buy 2 ESP32s

Thankyou for posting this video . I am currently in the process of repairing a cat n car from Copart. Imagine my dismay when it turned up like a filthy ashtray. I like you stripped and wet vacced complete interior including the head lining and yes it still stinks . This is my next move.

my coleman b200r won't idle what should i do? it's brand new and barely have riden it.

This worked! Only took 5 minutes.