How to Setup Your Goldshell Mini Doge Miner: Tutorial

[@axeloniusl1316]

buddie crushed it great viedo

[@noahpierce5205]

Finally a full setup thats clear cut, thank you!

[@user-bz8le3bv6r]

Solid advice. i came here because its start to finish for brand new miners! APPLIES TO ME hehe

[@user-bz8le3bv6r]

You a Marine Matt? because i felt everything you did in this video was forthcoming. Thanks again!! Semper Fidelis

[@BillGriggs]

Great info Matt. I will look into this more.

[@Petro12822]

I watched 10 other videos and this one was by far the most clear. Both of my mini pro’s worked immediately after following the instructions w/ F2Pool/wallet info. Appreciated!

[@BitTradeguy]

by FAAAAAAR!

[@Alohathegreatpyrenees]

What does sync payout address do? Do we have to click on it?

[@jona2000]

Very helpful video, thanks Matt. The only menu I couldn't find was the "Pool Config" screen where you named your miners 01 and 02. One question: Is it safe to let the Mini-Doge hardware unit run 7 days, 24/7? Temp reading is 77 degrees Celsius. Green color suggests that temp is normal.

[@briantilley3499]

So I’ve got 4 of these running and they’re doing great. Was wondering recently f2pool show more merg mining like lucky coin bel and pep can my mini 2 also mine those as well at the lite and doge

[@Darkforces817]

Great video! Thanks Matt that was super easy. :-)

[@Mywhtjp]

Good clear setup instructions. It's plug n play for sure.. just use a bit of patience. I do GPU and CPU mining with 2 pc's and a laptop as well.. This is my first ASIC though. Also dabbling with USB stick miners too.

[@fishyfiverr]

Hey Matt, once I get it connected to my pool can I then move it to another location like a friends house? Thanks

[@MattMinesCrypto]

You’ll have to set it up again because it’ll be on another IP address. But the username for the pool will be the same.

[@arielblanco6036]

Why doesnt my shovel turn green next to the pool address on the doge mini interface?

[@yacht3167]

thanks bro ..very easy to follow

[@MattMinesCrypto]

Glad it helped!

[@phillipreausaw1774]

Great video. Got me through it. Could use a tutorial on other mining pools. Thanks!!!

[@tillmk6071]

Hi Matt, thanks for the great video. Could you also explain in another video „why“ one would mine or hodl minidoge in the first place? What are the prospects for minidoge and why, where you see it, what you believe will happen, what are the fundamentals and use cases that make it more than a meaningless coin and all that? Thank you so much (btw hodling minidoge and considering to mine, but would live to learn why this would be beneficial and not just waste electricity)♥️nice video!

[@MattMinesCrypto]

Absolutely, great question. And have to say, none of this is financial advice of course :) I only invest my $$ into projects that have utility and a use case and fundamentals like you said. Of course that doesn't mean that profits can't be made in coins that do not currently have utility and are meme coins. I thought the mini-doge miner was a best of both worlds situation for me. For a one time investment in the miner, I was able to mine Litecoin which has strong utility and fundamentals and as a byproduct, receive exposure to one of the most popular meme coins out there. So my philosophy is that I wouldn't put my own money into the coin but I also don't mind earning it & having it in my portfolio because there is value in it. I also believe that for the coin to continue to thrive, the team will need to evolve -- only time will tell.

[@MoobyTooby]

Can anyone help me. I setup one mini doge miner setup works great. I got my kd box yesterday but when i click find my miner, neither miners show up on my list. Am i missing a step

[@lukeholnbach8610]

Thanks for the video Matt. My miner is up and running and has the green symbol on gold shell. It is connected to F2 pool but I cannot get any signal on F2 pool for the miner and shows 0 online and no workers. Please any tips to get this fixed?

[@MattMinesCrypto]

Hi Luke! So I have been dealing with the same thing regarding my MiniDoge miners and I THINK I figured it out. They've been up and running again for 3 days now so fingers crossed. But all I did was DOWNGRADE the firmware to the previous version. I have a video on how to update it, so all you would do is select the previous version instead of the new version. Let me know if that makes sense, and if you give it a try, if it ends up working for you.

[@lukeholnbach8610]

@@MattMinesCrypto Thank you. My software did need to be updated! I also did not have the same name in for the mining configuration. Thanks for the content.

[@LesImmeublesFortin]

Hi Matt, I just got a mini doge miner. I wanted to know if I can put a 240v cord on the power supply? Or just a regular 120v outlet Thanks

[@3sixtymining]

Thanks for the video. Very helpful.

[@MattMinesCrypto]

Glad it was helpful!

[@briantilley3499]

So just a dumb question does what you’re mining have to go to a wallet or can it go straight to a trading platform

[@LearnYourmoney]

I’m getting a oops unable to set new pools in the pool configuration. Any thoughts on what this could be?

[@chrismondak]

What do you do when there’s a solid red light?

[@matthewgleizer8423]

I would like to know if i can only mine one versus both at the same time

[@bongwoophet]

Hello Matt. Justed subscribed. I'm following your sets but my second mini is not green on goldshell home dashboard. I removed it and re added the mini 2 but still not greeen. On the second equipment, there is a red light. Please advise and thank you per request.

[@Cesar.Plascencia]

thanks i was struggling and you helped me ..

[@Imagine-biz]

Thanks for the video!!!

[@NerdThingsAndMore]

Thanks for the info 👍

[@LearnYourmoney]

Please help mine is fired up and on the find my miner page when i hit settings it buffers and says cant reach the page took too long to respond please help

[@LearnYourmoney]

Hey what’s up Matt I’m trying to get my mini doge miner going and as soon as I hit settings where it shows my miner it buffers for a minute and says site can’t be reached took too long to respond. Any ideas?

[@jona2000]

Hi again Matt. This video briefly mentions that you need to mine Litecoin if you wish to mine Dogecoin. Really? Why? Can I use merged mining to mine both of them at once? My mini-Doge miner is quietly mining 24/7 but my revenue is only .004 Litecoin after 3 days. Is this right? How can I convert them to Dogecoin once I have a good quantity? Thanks again for your helpful video.

[@sweetnibblits2263]

Man I set up everything as far as I know but it says it’s running but I have zero hash rate so maybe I’m doing something wrong I set up a wallet on coin base then opened up the laptop I chose unmineable and etchhash algorithm GPUs device miner using phoneixminer but it’s running but not getting anything any suggestions

[@MrNotoa]

Hi Matt, with a higher hash rate and lower price currently is it still profitable?

[@matthewgleizer8423]

Can I just mine doge or it automatic does lite

[@jerryestrada5586]

Who can i trust to buy a Goldshell Kaspa Miner?

[@user-bz8le3bv6r]

watch matt mine new setup

[@benpinder]

what is the standard payout per day and cost in electric etc for one machine? - Great video super useful and insightful

[@MattMinesCrypto]

Thank you, Ben! Right now, on average I'm earning about .004 Litecoin per day which is $.84/day and about 8 Dogecoin per day which is about $1.74/day. Totaling $2.68/day. Electricity to run it costs me about $.67/day. I know I threw a lot of numbers out there but the miner is profiting $2.01/day currently. If Doge or LTC would break out of the lull they've been in, of course I'd be a lot happier and the profit goes up along with that price appreciation.

[@MattMinesCrypto]

this site does a great job of estimating profits: www.asicminervalue.com/miners/goldshell/mini-doge

[@benpinder]

@@MattMinesCrypto this is great thanks!

[@JB-pk1vc]

Thanks Matt, I was wondering about these miners. The payout is a little paltry, after taking in consideration the electrical cost, but after all, it's all about having multiple streams of passive income. I guess the noise isn't too bad, you have it setup inside your living room, yes? The only other concern I have is how long is the lifespan of these units, do they become obsolete over time?

[@MattMinesCrypto]

Paltry is a great word ;) But you nailed it on my philosophy, I'm about as many streams of passive income as I can get my hands on because we don't have a crystal ball and know exactly which and when specific coins are going to explode so I want to accumulate as many of everything that I can get involved with. And the reality is that I'm not going to lose money, they're all going to at least break even for me in less than a year and I'm happy w/ that. They are all in my living room. The noise isn't bad at all. I have a lot running over here and I don't notice the noise at all. Great question about lifespan, I'd imagine that eventually hardware wears out but I'm not 100% certain.

[@jonDoe-ml3jq]

mine says miner name not user name... would it be the same??

[@RedWhiteBlueYo]

How much are you making a day? On this one?

[@LearnYourmoney]

Does Ethernet cable go into Router and if my router is not in the room where I plan to put my miner what are my options?

[@MattMinesCrypto]

Certain Goldshell miners come with WiFi connectivity but not all of them. Outside of that, you could just run a long ethernet cable through the walls but that's obviously not the most convenient.

[@LearnYourmoney]

@@MattMinesCrypto I got it taken care of. I ran an Ethernet cable across my attic and snaked down the wall in my garage where I then installed an Ethernet switch. I got 4 miners up and running and I’m waiting for 2 more. I got 2 CKB miners, 2 mini doge/litecoin miners a Bitcoin miner and a helium miner.

[@MattMinesCrypto]

@@LearnYourmoney amazing! You’re crushing it!

[@ViceCoin]

Compatible with Ubuntu 22.04 on Linux?

[@sgtbosshog2182]

Got one coming in might need a little help setting up

[@karsonmccormick9114]

Hey Matt , by any chance can you help me with setting up . I am on my goldshell login everytime i go to system > Wi-Fi settings and type my log in settings it logs me out the goldshell Wi-Fi network leaving me to reset the rig to have it pop up again ? Can anybody help me

[@vinhle9808]

Hi Matt! happy new year. your video was help me out a lot. thank you Matt. do you know how come the miner is not showing on my worker at F2pool?

[@MattMinesCrypto]

Hi Vinh, that's difficult for me to diagnose without seeing screenshots or your screen unfortunately. Wish I could help.

[@callmebigfish3823]

My says fail to startup cpbo

[@sweetnibblits2263]

Iced tried changing ports and everything

[@larrygiordano1951]

I have 2 to setup this weekend. I might need help

[@Nutrispark_Wellness]

This mini doge is only getting 5 doge coins a day. What happened did i do something wrong?

[@edferriter5586]

Are you plugging this into a 120v outlet?

[@MattMinesCrypto]

👍🏼 yes.

[@askingyou4life]

hi, you choose litecoin but then how you mine doge?

[@MattMinesCrypto]

It automatically does it -- that's how the script is set up.

[@JamesTrujillo1965]

Trying to get my pool url going on my mini doge miner could you help me out

[@MattMinesCrypto]

Have you had any luck?

[@freakshizzle1947]

life saver

[@robertorthwein7680]

how do you log into the IP of the miner>?

[@MattMinesCrypto]

Goldshell.com > Support > Find My Miner

[@robertorthwein7680]

Lol I typed that just as you were saying it in video Had watched other videos that just talked about profitablity and was just wanting to connect, I got connected profitablilty be damned litecoin to the moon!! 😀

[@robertorthwein7680]

Sorry I carried over and vented my frustrations before watching whole video

[@MoobyTooby]

Matt please help me figure this out.

[@MattMinesCrypto]

Email me: [e-mail]

[@MoobyTooby]

Sent

[@andydo143]

I got the minidoge and mine with f2pool. For some reason i only got litecoin, no dogecoin at all. Can you help?

[@MattMinesCrypto]

Hi Andy, when log into F2 Pool, click your account settings in the top right hand corner, click Payout Settings, then LTC, do you have wallet addresses entered for both LTC and DOGE?

[@andydo143]

@@MattMinesCrypto i didn't have wallet address for dogecoin. Just added now hopefully that works. Thanks for the lightning fast respond.

[@MattMinesCrypto]

@@andydo143 Awesome! Hopefully the missing DOGE shows up -- I'd be curious if it does, please keep me posted on that.

[@andydo143]

@@MattMinesCrypto I start mining 4 days ago.. just got litecoin and today I got litecoin and dogecoin after entering the dogecoin wallet. I guess they won't give you any dogecoin if you don't enter the wallet address. Anyhow thanks for you help. Have a great holiday.

[@JayTemaatFinance]

😊

[@flexluther100]

I just returned mine. The price for the miner is too high to receive small profit..

[@NickleNinja2]

its all about collecting the amount of doge. so when the value goes up, youve added a ton of free shares