HOW TO SHARPEN A CHAINSAW WITH AND WITHOUT A FILE GUIDE, ADJUST DEPTH ADJUSTERS

[@vestnpants]

Hi steele829, please don't take this the wrong way, but it sounds as if you have the chain on backwards. Your comment reminded me of when I did it. In a hurry, I just chucked the replacement chain on & proceeded to burn my way through the wood, hopeless. Just like you, the chain was spinning & making so much smoke, then came the lightbulb moment! Take a look at which way your chain is on, which way the chainsaw rotates & most importantly, which way the actual cutting teeth face, it's a super simple tip, but so easy to get wrong. Cheers

[@Tuin-toolsNl]

Hi Rob,Thanks for your comment! You can be assured we assembled the chain correctly!

[@dalewhatfor7098]

Hi Marie, sounds like he has as you thought. Gave me a smile as i think most would have it happen, once or so!!

[@yambahadurbohara5129]

Good

[@tinadan308]

Nice, practical video. Thank you. No expensive tools needed with a little bit of practice.

[@liberttiakok3060]

Terima kasih atas perkongsian anda sahabat. .

[@akkinimuthusmuthu8093]

Good explain

[@markalexander5380]

You guys are so good at making videos you should totally quit your day job and become a videographer

[@thomasgronek6469]

that's side play; either the rails are splayed out, or the chain is the wrong gauge.

[@Filmfare-c1i]

Nice video 👍

[@ClaudeSac]

Toiantools for da win!

[@thefarmlifeinhd]

Is this the same guy from How It's Made?

[@elydanification]

how did you determine 30 degrees sharpen angle?

[@Tuin-toolsNl]

You just follow the marking on the file guide. Without the file guide you need experience or a chain with a 30 degrees marking line.

[@danuwbroto5756]

*L i k e* V I D E O 💪🖒🖒🖒

[@mikemeneray1437]

very helpful video--thanks!

[@aidanduncan8187]

Love how you he engine cover has a smiley face 😊

[@petersack5074]

...just draw aline, on your work surface. place saw bar at 30 degree angle. clamp down, WITH LARGE C CLAMPS...........use line as visual ' file guide '...... then, file away....

[@desembolandofacil]

How to take care of your chainsaw: kzbin.info/www/bejne/pJqqdKB7rZljeZo&pp=gAQBiAQB

[@Nartacahndeso]

Salam satu profesi bos..

[@imthiyaspp1826]

Where to get it? Plzz rply 😇

[@steele829]

My saw is burning the wood and not cutting just spinning and burning

[@Tuin-toolsNl]

This can be a good opportunity to practise your sharpening skills on this saw chain.

[@aguileratreeservice9189]

You don’t have to count your strokes! So if you hit a rock your telling me your still going to count your strokes!

[@solarr5143]

You count your strokes so your saw cuts in a straight angle, having uneven teeth can make your saw cut in a banana shape, not fun lol

[@jerrbear7048]

@@solarr5143 The teeth don't need to be the same length at all as long as the depth gauge in front of it's cutter tooth is taken down to the correct height for that particular tooth. They all can be at different lengths throughout the entire chain. No need to count the strokes

[@texp87]

You do that so the teeth are sharpened evenly. Sharpen unevenly and you will notice it in how.it cuts. So you seriously are a tree service with that kind of statement. That statement says a lot about your know how.

[@jerrbear7048]

@@texp87 The teeth can be of all different lengths on both sides as long as the teeth are sharpened properly and the depth gauges are taken down in accordance with the tooth in front of it

[@KiranKumar-xb9up]

👌👌

[@ranbocani4475]

Beginner wood cutters use that tool to get motor tickets, but you're used to it, you don't even need that tool

[@billorights7486]

file into the bit, not out the bit fail

[@adrivanpeer4591]

Toyen tools (Y)

[@mubarakislam4131]

Hindi voice bolo

[@faizyabkhan229]

0