How to sharpen a drill | Bright Idea With a Drill !

How to sharpen a drill | Bright Idea With a Drill !
On this channel I present everything that I have done with my own hands.
Creative ideas, useful tips !
We turn simple things into unique ones! Subscribe, it will be interesting!
#craft #wood #diy

[@Glicksman1]

After the 11,000th step, I decided to go to the hardware store and buy a new drill bit for $1.50. Thanks for obscuring the end of the thing. Good work.

[@amelbaghdad381]

Too many steps And energy wasted when you can hold the drill bit Free hand with 45;* you can do in 2minutes max.. No value ....try again

[@fev3rd]

The key was sharpening the drill. Did not see it

[@troo_story]

🤣🤣

[@Dr.Nagyonfaj]

Right? I was fast forwarding just to see where this thing was going. . . only to have the main thing obscured. What a complete waste of time!

[@166PolarBear]

Do you think anyone actually tries this crap

[@user-ho4ur1cr8y]

Он наверное чтобы бабу тр....ть будет неделю станок делать....выкинул из жизни и своей и нашей бесценные минуты

[@visitazaitaev5733]

Сколько градусов надо ...для заточки сверла ?

[@user-ff8yl5dn8b]

@@visitazaitaev5733 120

[@ВладСидоров-с9к]

😂😂😂😂 золотые слова

[@user-vu2tg1hc5r]

Согласен. Ничего тупее и бесполезнее давно не видел.

[@ГеворегОбезьян]

🤣🤣🤣

[@alanpiper9614]

The best method is to do it freehand. Practice will get you doing it like a new one. This was a skill we learned as an apprentice in our first month after being given the job to sharpen all the blunt drill bits in the shop. There are many vids on KZbin that show this method.

[@wildfire529]

I was taught as an apprentice to sharpen by hand.

[@newfreenayshaun6651]

Where do i sign up?

[@KennethMeacomes]

I worked in a machine shop for 27 years. Try sharpening left hand drills freehand on a grinder.

[@Juergensry420]

@@KennethMeacomes Try using right handed drill bits like everyone else you may be left handed but a right handed drill bit wont know the difference

[@KennethMeacomes]

@@Juergensry420 I needed a left hand drill when tapping a hole with left hand threads on a Brown & Sharpe automatic screw machine. Yep I'm old school

[@Liberallez]

WHO THE HELL PUTS THOSE "OTHER VIDEOS" THINGS RIGHT IN FRONT OF WHAT'S HAPPENING AT THE ENDS OF THE CURRENT VIDEOS...SO YOU CAN'T SEE THE FINISH????

[@deefree9570]

Ya maw

[@billybillybob-thoughtpants9958]

I agree, absolutely pathetic ain't it

[@djeeves1]

Yah I agree 😡

[@hiruchari2803]

What is the use of watching video wasting time without viewing the results

[@jody6121]

Damn right, that right there made me not watch or subscribe ever again...with a thumbs down.

[@petercarey9954]

Shame I couldn't see the end result. So much work to make that jig and then not see what it does

[@Loan--Wolf]

^

[@erkintek]

How careless about viewers

[@DeveloperChris]

because the end result was probably crap. so it was deliberately covered

[@LegendaryHorse3075]

KZbin Annotations No More addon - The result was great!

[@mikparker2572]

Exactly what i thought, I replayed it twice just in case, feel let down

[@vadimbikov4216]

М-ДА.... ЗДУРЕТЬ И НЕ ВСТАТЬ... ЛЮДИ ....ЭТО ПРОСТО ФАНТАСТИКА..... АВТОРУ БОЛЬШОЙ КИЗЯК. ЗА ТО ЧТО КРАДЁТ ВРЕМЯ У ЛЮДЕЙ.

[@user-rk8yf5hk4n]

Разрешил 🤣🤣🤣

[@user-is8ft8qw4r]

Шедевр мыслитель

[@ланки]

Этому дельцу хочется больше просмотров

[@беляш2014]

Он деньги заробатывает

[@Glicksman1]

Хорошо сказано.

[@Oldjohn52]

the dust collector is pretty good.

[@matg3802]

I've always done this by eye and it works great.

[@danbrownellfuzzy3010]

I always have to do it 3 times but all the sudden it just works again.

[@danbrownellfuzzy3010]

I like his drill press he made using drawer sliders.

[@putnik-l2u]

"Мало кто знает об этой функции дрели!" Я думал он её вставит себе в зад. А иначе зачем вставлять наоборот сверло на главной картинке?

[@user-rk8yf5hk4n]

Я тоже про это подумал и посмотрел))

[@user-ts1rt7bj3m]

Аналогично,ну еще увидел Шурика и пилу.

[@wiwi824]

Не афишируй тут свои предпочтения про зады

[@user-hc3yn7ok6r]

Дольше делать будешь чем сверло точить:) собаке заняться не чем она яйки лижет🤣🤣🤣

[@user-ij3gm8hp1g]

@@wiwi824 тебе муж комментарии подсказывает😅

[@pupochek130]

Картинка со сверлом наоборот, любого мужика заинтересует так и заработал обманом для говновидео просмотры.

[@KurzemnieksRu]

Одно слово - кликбейт и очередная диайвайная хрень от каких ютюб просто ломится

[@tgmerlan]

Это да! Походу у пацана времени с запасом, и наждака нет

[@konstantinzdanovsky8979]

Точно! Я купился именно на картинку!))))))

[@user-ob4qg5er9u]

Это противозапорное устройство!?

[@vvs3821]

@@konstantinzdanovsky8979 Такая же история, а сколько просмотров! И все наверное плюются в его адрес! ☝️🤪. 👽🛸🇷🇺

[@user-gu6gj7ch4e]

Пипец, чтоб наточить сверло, столько трудозатрат и времени, когда можно от руки хорошо наточить зная технику заточки.

[@user-dw4hj1zh4b]

дружыще, я тоже такого мнения что много шума из ничего , но есть намного тупее чем мы, и им нужно по фен шую, это для тех тупых. Пусть смотрят и развивают своё воображение, посмотри вокруг, как тупеет молодёжь.

[@user-wz2wi7jq8d]

@@user-dw4hj1zh4b соглашусь пожалуй. Канал для безруких мерчандайзеров, кои хотят чему то научиться. В целом позитивно. Нет?

[@555KANAL]

@@user-wz2wi7jq8d пАйдёт, годный контент😂

[@user-dw4hj1zh4b]

@@user-wz2wi7jq8d ДА, СОГЛАСЕН, ПОЗИТИВНО И МОЖНО ЕЩЁ ДЛЯ ЧЕГО ТО ИСПОЛЬЗОВАТЬ.

[@johnbishop5316]

well bugger off then.

[@wildwild8479]

В процессе просмотра посетила мысль, что я тупой рукожоп и нифига не понял, но почитал комменты и успокоился, да поржал от души!))

[@ВикторТитов-ж2б]

Пока делает эту приблуду, можно заправить сотню сверл

[@АнрейЛевин]

А я даже и не знал, что дрелью оказывается можно сверлить

[@johnbishop5316]

Is this some Russian troll trying to get me to vote for Trump?

[@user-cn1vl6ol1j]

Результат - хорош! А сборка приблуды на любителя...

[@АнрейЛевин]

@@johnbishop5316 vote for Putin

[@johnbishop5316]

@@АнрейЛевин I don't think I'll be allowed to.

[@АнрейЛевин]

@@johnbishop5316 Russian hackers are already on the way to get you

[@randyexel3655]

I’m a old school guy, had to learn to sharpen drills with a bench grinder, never had a complaint yet, could sharpen 60 bits in the time it took to watch this😞

[@philhoward8768]

More video making practice for you. The end just doesn’t cut it.

[@grahamcarr9566]

Yeah But ?? Now I know what a Wig Wam for a Gooses Bridle looks like ??!! 😂😂

[@storiesfrombelarus8998]

При чем вставленное наоборот сверло на главной картинке?

[@user-se4my5cf9h]

Да потому что он дурак

[@nosirrabiev770]

Думаю он её в зад вставлял а обратно вынул с дрелью

[@storiesfrombelarus8998]

@@nosirrabiev770 хороший,наверное,способ,для определенной категории граждан , но хлопотный :))))

[@Dragon40195]

@@storiesfrombelarus8998 для этой категории граждан сию приблуду будет сделать сложнее чем заточить сверло

[@storiesfrombelarus8998]

@@Dragon40195 гумасеки народ изобретательный,мы о них переживать не будем :)

[@dakrawnik4208]

This is a new subculture of DIY. I call it, DIYB. Do If You're Bored. WDYT? I accept royalties. ✊🏿

[@MrJerrydbarnes]

I went to the hardware store and bought a new bit while you were making this video!

[@colinwilkinson9387]

I was taught as an apprentice how to sharpen a drill, do it by hand to maintain the clearance behind the cutting edge.

[@alttruk6483]

Аффтар - готовый пациент к Доктору Дью

[@user-ow7zx6qo6i]

Доктор Дью скорее терапевт, а это походу клинический случай... Тут даже доктор бессилен, ибо он самоделку, делал другими самоделками, чем он делал самую первую самоделку интересно?

[@alttruk6483]

@@user-ow7zx6qo6i Нда, тут надо подумать....

[@user-ow7zx6qo6i]

Я так думаю, тут нужен экзорцист...

[@user-fy1yy9hi5v]

ПХМ зашкалит и сломается. Тут все 500 полуляхов.

[@trtlgrdl]

Maybe Im just old fashioned, but you are clearly 45 minutes into the process. I went to Menards while the video was playing and bought some new drill bits.. problem solved. ;) Though I did get to see the end while I was playing with my new drill bits.

[@ivanleterror9158]

Trained to hand sharpen years ago doing machinist/maintenance work. Got a good understanding as we could stick them under an optical comparator to check the angles till we got it right. Do have a Drill Doctor and it does a good job if you don't try and rush. A helper for diminished eyesight.

[@richtomlinson7090]

Absolutely.

[@danbrownellfuzzy3010]

Comparator good. Drill doctor was better when home Depot let you return it afterwards

[@bamspay]

The add covering the video was a nice touch.

[@goodwin2500]

Если вы рукожоп-это Вас не спасёт . А если с руками - то сверло можно заточить за несколько секунд , не мудря пол-дня какую-то приблуду.

[@nikolyabusiness1705]

КРАСИВО ПОДМЕТИЛ - СУПЕР

[@user-tm4vm6jk7d]

@@nikolyabusiness1705 Глупо подметил...Когда мне бьіло...ну лет до 50, я тоже как два пальца об асфальт...а вот позже начинаются проблемки. Єто вот тебе только один вариант.

[@user-fd5gc1gj1y]

@@user-tm4vm6jk7d согласен,заточку делал на глаз и вроде неплохо,а сейчас в55 зрение нето...а почемубы и нет!?...

[@user-wz2wi7jq8d]

@@user-fd5gc1gj1y ну я тоже в очках давным давно работаю. Но такую приблуду мастерить.......

[@user-hm2iw7oe1x]

Дед щукарь когда прыгал через лужу и брякнуся жопой ,,,,старость не радость,,,,,посмотрел что не кого нет ,,,я и в молодости такой был, ,,так что ненадо косить на старость окуляры есть ,а старпёрам уже нехрен к инструменту лезть вот такой хренью заниматься кулибин хренов!пиздец триада сам удивляюсь.

[@robertgarcia6140]

It'd be nice to see the final results!

[@HotRodCVO]

Get KZbin Red, worth the monthly fee, NEVER an ad!

[@user-qo7jn1mf1e]

В чем так сказать функция дрели? Правильно анонсируй свое видео. Видео из серии- гавно.

[@user-jv4hh9du6k]

В том что она крутится.

[@СергейСиницын-ж5л]

Шляпа какая-то

[@user-rr9cq8ju9z]

Ролик - убей время, может полегчает...

[@MJ-sq7gd]

Автор насмотрелся роликов, как работают мастера, и вдохновился снять ролик, как сходит с ума рукожоп.

[@user-ob4qg5er9u]

Ещё один полулях!

[@pierome9]

GREAT IDEAS

[@WayneCook306]

The time it has taken you to make that, I went and sharpened my drill set and then came back to watch the rest of your video..

[@frankhornby6873]

....and missed the end!..

[@legoman8960]

Could of made dinner as well

[@WayneCook306]

@@legoman8960 Yes correct I could have.

[@ветерок-й8б]

Какие же мы были идиоты когда сотню лет без этой херни сверла затачивали

[@ihorshpilevoy2742]

В СССР такие многофункциональные комплекты с дрелью выпускались промышленностью и продавались в хозмагах, у меня такой есть до сих пор.

[@АлексейКарташов-й2б]

Я удивлён творчеством этого Человека ! Чтобы иностранец самоделками занимался ... !!! У них наверняка всякие станки есть ... Но он творит !!!

[@user-nh5te2gv2y]

🤣🤣🤣

[@whysoserious7014]

Good idea from scrap materials. Unless you have scrap wood laying around, working with wood in wood shop. It's cheaper and saves time to just go buy a bit sharpener and sharpen all your dull bits in a shorter amount of time and the cost it'll take you to buy the materials and build the jigs.

[@mukundkulkarni8283]

The best innovation

[@Гриша-я9т4ф]

Браво! Автор, теперь Вы много о себе узнали! Как о функциях дрели! Интересно, сколько Вам годиков?

[@markosterman419]

Would be great if an ad didn’t come up right at the point where it shows you actually sharpening the drill! 😕

[@okofilina]

Полезная функция: не смотреть от начала до конца, а сразу смотреть финал. Не потеряешь столько времени.

[@leob6534]

A drill is a power tool. A bit is the fitting that creates holes. Just saying. If you want to illustrate a process, it helps to use the correct terminology. This is a very informative video about sharpening a drill bit. Thanks.

[@НикиКорочкин]

Вот уж да.... Покажи как можно огурцы солить с помощью дрели и пылесоса...

[@sting1111]

Just went to lowes, forgot my wallet, went back, bought some new bits, came home and this video was still running.

[@user-dw4hj1zh4b]

Ну вот про этого парня я на 99% могу сказать что он заточит сверло и без этой приблуды.

[@PJMDValley]

I too was taught how to sharpen a twist drill when I started my apprenticeship. I could do it on a belt sander but preferred a face grinder. If I tried a stunt like this I would have been thrown out of the shop. I was also shown how to sharpen a 1/4" drill to drill a 5/16" hole by one of the senior tradesman ... that's where you learn.

[@aric1666]

Where can I learn?

[@4service459]

Мало кто знает, что у дрели есть функция, собирать 2 000 000 просмотров.

[@1970Mikhail]

😂

[@kanatdos5866]

Уже 3

[@user-wz2wi7jq8d]

Супер!!!

[@igori7560]

Уже 3.6... Чудак реально из говна и палок бабки с ютюба делает...

[@user-fy1yy9hi5v]

Так есть ещё функция "пожаловаться". Если ничего не делать, подобным говном засрут и хостинги, и лифты и улицы.

[@rick_3.50]

I own 2 drill bit sharpeners from Christmases past. I used one of them once.

[@redtop03]

great video, right up until the suggested grinder video blocked the view of the actual sharpening of the drill bit :(

[@legoman8960]

Plot twist: they knew it was a waste of time

[@leandersmith6184]

We couldn't see the end because of the announcement of the next video too bad, it was looking really interesting.

[@fraross6212]

No it wasn't. At best this will only put a point on the tip. Bullshit video. That's why they didn't show the end result.

[@ronmorse3468]

@@fraross6212 I've had the misfortune of watching a couple of his videos now. One was a waste of three minutes of my life and the other was a waste of four and a half. I just went straight to the comments section in this one; didn't (and now won't) watch it due to what I've read. Both other videos also had the end result hidden by pop ups - seems to be an ongoing thing with this hero.

[@ДимДим-ш1о]

Просто нужно начинать смотреть с конца.)

[@mikiemojo]

Two words......... Drill Doctor.....it actually does work.

[@user-st7cr2tt4w]

Браво автор . Мало кто знает что дрель обладает патроном и он может зажать инструмент , при этом надо обязательно включить дрель в розетку , чтобы патрон с инструментом вращался.

[@erikr6101]

He made a drill press from a hand drill, scrap lumber and cabinet slides...I need that video!

[@erikr6101]

Nevermind, I found it. This guy is like Inspector Gadget. Go go gadget drill press.

[@ВячеславПриходько-ю7я]

Гениально!!! Дрель есть а точить нечем!!! Надо станок замутить из бабкиной тумбочки!

[@muhammadshurafa602]

I hate it when you guys overlap things obscuring important steps or final ones.

[@user-pz1np3rv6j]

И это всё для заточки сверла? Столько замарачиваться? Мне проще на наждаке заточить.

[@user-xy8ru4wq4h]

Согласитесь, что хлопец все-таки не дурак, набрал 4,5 млн просмотров за пол года. И посмотрите все приспособы сделаны из дерева, из обрезков! Наверное в этом и была цель.

[@stevetarrant3898]

I find this kind of funny. It's not that hard to sharpen a drill bit free-hand on a grinder. I left school at 16 and got a job at a saw service company. (For 2 years) Boss taught me to sharpen drill bits free-hand in about 10 minutes. I admit I ended up with a lot of experience/practice at it but it's really not that hard. I suggest dedicate about an hour practicing with some old bits and you should be pretty good to go. I'm now in my 50s and routinely sharpen my drill bits in seconds. Also pretty handy sharpening all my knives, scissors, shears, chainsaws etc. Useful skills to learn.

[@robertcase8731]

Cheers . Patience Prevails ! 🤪

[@michaelkorrek7856]

Yes

[@jdjeep98]

Well, that's 5:44 of my life I'll never get back.

[@viktorkachovskyj]

А нельзя было сразу написать заточка свёрл с помощью дрели?

[@user-rc2bx9oi3y]

Можно. Но тогда просмотров будет меньше.

[@1995jug]

I went to machine shop school you sharpen drill bits by hand you will learn after a while.

[@Seazer009]

An old machinist showed me years ago how to sharpen a drill bit on a bench grinder in seconds by hand...Works just fine..

[@stewartw.9151]

Yup. If you know what you are doing it all done by hand and by eye, nothing more needed!

[@busbuilduk1397]

When I worked on site I used sharpen a drill on a angle grinder by eye

[@timjohnson1199]

I will rough it on the grinder and finish it on the belt sander. By hand. Looks great.

[@booifojoe]

@@stewartw.9151 I stick to using my hand. That eye thing is too dangerous - always losing my grip.

[@camgnilpe9300]

@Mikey moo Good for you. Don't forget your gold star!

[@mikegalas9313]

Good idea if you want to sand your drill bits!

[@doughawley8101]

I learned how to sharpen drills by hand when I was 16 years old. Been doing it since for many years. Better than wasting time building jigs and fixtures. Learn some skills!

[@anthonyreyes9084]

I did see d last part on how to sharpen d drill bit!🤣

[@user-dt9gr6zo5e]

Вот станочек сверлильный сомодельный,два раза мелькнувший интересней

[@user-st5wq3gi2u]

И болгарка с пилой,упором и трубой - тоже любопытно!

[@user-sn5to3oz4i]

@@user-st5wq3gi2u я так понял , что это подвод пылесоса. Забавно однако...

[@grahamking8075]

Never see the end as advert covers what you do

[@winfriedsauter4684]

I am a tool and die maker, this drill will never cut. Land end is the same height as the cutting edge.

[@BCDanno63]

But he does love to show his skills with a protractor doesn’t he..??

[@ivanleterror9158]

The only way that would work is to use it on Plexiglas. Also very close heights (shallow) for stainless steel.

[@hutchh.6933]

Yep. No relief on the cutting edge. On the side of the bit it should slope ever so slightly to the back side of the flute.

[@newfreenayshaun6651]

Can you do that again? I didnt catch it the first time.. Thx in advance!

[@FoxAlexey]

Шок, как я раньше до этого не додумался. Из этой серии. Говно короче.

[@velcroman11]

That hole cutting tool looks like a good way to smash a knuckle. The tool is/was designed to be used with a brace, not an electric drill.

[@user-rp4vn6hz8c]

И как же я раньше обходился без таких приспособ

[@hammerheadize]

You have to go to all that process to sharpen a drill?

[@andrewbobucky4612]

With the amount of time, effort and materials put into this, you could have just gone to the hardware store and bought a new set of drill bits. Even the cheapest ones on the shelf would have been better than making this ghetto rigged grinder.

[@In_Rem]

that drill bit wouldnt cut wood it had no relief (the cutting edge was higher on the bit than the lowest point of the flute

[@alchaik]

Prep proess s magnificient. All solid smooth, one step after another. At the third minute i realized i don't care about sharpening drill bit.

[@mattburke988]

The art of sharpening a drill bit by an is very hard to conquer. Apparently this guy has a lot of time on his hands maybe he's retired. Looks like it could work but I have my doubts being a machinist for 15 years

[@umarfarux5639]

Потерял целых шесть минут 🤦‍♂️ я за это время заточил бы пять с болгаркой 😁

[@11calman]

I have always found it quicker to stick my Drill into the Vice with two bits of wood to hold it, then hold the drill bit in place by hand, (as quick as I have written this, is the same speed that it's done)

[@In_Rem]

The title should be how not to sharpen a drill. That drill bit wouldnt cut wood it had no relief (the cutting edge was higher on the bit than the lowest point of the flute

[@bertblue9683]

And mis titled in that you don't sharpen a drill, you sharpen a drill bit.

[@Glicksman1]

I must admit to feeling some compassion for "Worker with Hands". I think that he/she meant well in making this vid, but lost the clear picture at the end, much, I feel certain, to his/her regret. If I was too harsh in my former comment, please pay it no mind. Make more vids, but take more care. Peace and Love.

[@Sockmonkey5600]

My dad showed me how to sharpen bits with a DA years ago and after 20 years of doing it I can sharpen one really quick and it will hold edge for a long time

[@hans-jorgsasse6595]

Yes, my dad also showed me how to sharpen the drill on a grindstone. He had got a hand - technique to turn the drill and changing the angle of the drill to the grindstone at the same time while he was turning the drill. Turning the drill and changing the angle in one movement. The drill later was ss sharp as bought new.

[@jkj1459]

PLEASE TEACH OTHERS

[@hans-jorgsasse6595]

@@jkj1459 What's your problem ?

[@michaelmcguinness10]

@@hans-jorgsasse6595 You !

[@hans-jorgsasse6595]

@@michaelmcguinness10 I think your only problem is you yourself.

[@edwardbreault407]

I can do 20 on a grinding wheel for the time it took you to make that contraption.

[@Unikus777]

4:56 Чувак отмеряет 30 градусов, а затем приставляет деталь к линии прочерченной под 45 ... Чё за нах ? 🤦‍♂️😲 И кстати, заточка сверла не совсем правильная...

[@manatureprofonde4315]

А стружколомы на такой приспособе вообще не выточишь)

[@MrDaiseymay]

OR---JUST BUY A NEW DRILL BIT, THEY'RE CHEEP ENOUGH, UNLESS YOU WORK WITH THEM ALL DAY.

[@gendozgendoz939]

Ахуенная функция дрели- крутится,мало кто знал!!!

[@user-tk5cw5kq3i]

😆😆😆😆

[@СергейСиницын-ж5л]

Не говори...

[@energetik4605]

А еще в патрон можно всякую хуйню зажать.Она и ее будет крутить.

[@user-ui1vk6ib4l]

Уверен, у него есть еще дрель у которой вращения только против часовой стрелки.

[@user-ic7yq3pz5c]

Электродрель надо включать в розетку ?

[@benpress8884]

In the time it took you to make this thing, I could have hand sharpened every bit in all of my indexes. One thing you can usually bet on with KZbin videos; if it says it's a "brilliant" or "bright" idea, it probably isn't.

[@NoLimit37]

Данунах! 5 минут потерянного времени.

[@TechnologTV]

ты состарился за это время)))

[@ЕвГений-ю7р1н]

@@TechnologTV поседел ))

[@spartakd.749]

+44 секунд.

[@TechnologTV]

@@spartakd.749 круто)))

[@colinevans7134]

I think it would be easier to buy a drill sharpener, who has the tools to cut the wood and knowledge anyway

[@tazman9954]

All this time and wood and screws and dulling other bits to sharpen one that has that angel every bit has a different angel. When you can use a bench grinder and be done within seconds.

[@danoakley6538]

Angle. Mr.knowitall.

[@tazman9954]

@@danoakley6538 No just some common sense a waste of time and money doing all this to sharpen a cheap as drill bit while you dull other bits to fix one bit.

[@marcgg9760]

I can't believe I watched this. What is next? Build a canoe out of paper?

[@user-lu1tl7uh7z]

жалобу "введение в заблуждение"

[@УэсСтьюди-ь6б]

СПС - ТИХОНОВ. ВОВРЕМЯ НАПОМНИЛ. ЖАЛОБА - введение в заблуждение - Ложный значок видео !!! - ОТПРАВЛЕНА.

[@user-lu1tl7uh7z]

@@УэсСтьюди-ь6б я думаю, это его отучит нас обманывать!

[@socalRooster]

And a bench grinder has the attachment built in “done”

[@luisb7379]

Benchgrinder

[@redmired1012]

Если бы было нормальное (соответствующее) название то можно было бы и плюсануть, а так, за потраченное время только минус!

[@regortex3364]

Just do it by hand (on a bench grinder or sanding belt/disc), It takes practice and knowing your angles. Drill doctors etc. are a waste of time.

[@scoop4363]

16OCT2020 - In the time it took to fast forward through this I shopped, ordered, received, unpacked, setup, and used a bit sharpener.

[@apiligrim1026]

Good.Ok

[@sambow4u]

This IS NOT the way to sharpen a drill bit .

[@gekolizzard]

Buying a new drill bit is cheaper and faster than watching this…

[@coburnlowman]

Go to Amazon and buy a sharpening gauge , go to any machine shop and ask them to teach you how to sharpen a drill. Give the man a $10 or $20 for his time and you'll have a skill that you can pass on to anyone ,plus sharpen all or any of your drills at any time or any place there is a grinder handy.

[@davidinthedesert3532]

Exactly. I was less than 1 minute into the video and thought how I'd already have it sharp.

[@jbnrusnya_should_be_punished]

He can't do that. It is a fake account somewhere in russia. All the tools in video from china. All the materials in video are rubbish. They just put USA in About channel to get better monetization from KZbin and keep silence 'cause they don't know properly their so-called russian language.

[@WagonLoads]

They should have warned us that we won't see the end result of what it was made for.

[@Svjatoslav_Jar]

Труля-ля сплошное. Нахрен я смотрел🤣

[@magabalgarin]

Теперь твоя жизнь уже не будет прежней после просмотра этого видео 😁😁😁😁

[@Svjatoslav_Jar]

@@magabalgarin истинно так! ☝️

[@robertwalsh5461]

I just sharpen by hand eye coordination, works great!

[@martingolding4951]

I thought this video was going to show u how to sharpen a drill bit but to everyone's disappointment don't see anything

[@karrynmittge3866]

Martin Golding thanks

[@fuzzymath6240]

5:29

[@DonJohnSpain]

The commercial at the end destroys the view on how it goes and the result. It completely covers the most important part.

[@pijnto]

When do you show the part "how to sharpen a drill"

[@charlesknaack1042]

What ?

[@pijnto]

@@charlesknaack1042 no sharpening of a drill shown here at the he put a couple of flats on the end of a drill but does sharpen a drill

[@travisspinks5354]

Ha haa!

[@fuzzymath6240]

5:29

[@pijnto]

@@fuzzymath6240 If you think that is sharpening a drill you have a lot to learn

[@genyavolkov3828]

Читаю, отрицательные коменты и офигеваю! У человека есть руки, есть голова. Изобретает и делает. У кого, остался только желудок и задница, что бы сидеть на диване, пишут отрицаловку, т.к. сами ничего не умеют.