How To Sharpen A Dull Rusty Metal File !! Amazing Method !! Razor Sharp

[@VintageVet-64]

First off, if the file surface reflects light, the teeth have been laid down from improper use. You demonstrate improper use near the end of your clip. Do not drag the file across the material on the back stroke, lift the teeth off the material during the back stroke. Once a file rusts to any great degree, the edge of the teeth have rusted as well destroying their edge. Acid washing and scrubbing a misused and abused file leaves one with a clean, dull file. Learn proper filing technique and how to use a file card. Then after carding a file, oil it, and for Pete's sake hang it or put it in a makeshift sheath and do not chuck it in a drawer loose with other files. They will ruin their hardened, sharp, brittle edges by contacting each other. Pretty soon you have a chunk of hardened high carbon steel material for making scrapers, a utility knife, a paper weight, or to use as land-fill.

[@danneumann3274]

regarding dragging the teeth on the backstroke, We have all been taught this. Fireball tool did an amazing in depth test and showed that the files did not dull due to back dragging. It surprised me but the results were hard to argue with. kzbin.info/www/bejne/a2PHYYejorZor6s

[@InventorEye]

Thank you very much for your feedback! Stay tuned for more great content!❤😊

[@InventorEye]

Thank you very much for your feedback! Stay tuned for more great content!❤😊

[@MichaelWysocki-ks5xt]

Argue all night and day if you like, what I have found is files don’t get dull from ‘ back stroking ‘, they get dull from filing things that are too hard. You can use picture perfect filing strokes and lift up for return stroke with every cut, if material is too hard it will dull right out.

[@nealesmith1873]

Great job!

[@garymucher4082]

Looks like pretty good results. Files can be cleaned that way and using an acid will dissolve the stuck material. Of course the type acid you use depends on how long you put the file in the acid as well... Thumbs Up!

[@chadwickwoodturn]

Use one stop liquid with great care to clean files

[@vlogtv2085]

Good 👍

[@bill29-g3b]

Great way to restore an old file instead of scrapping it. My parents grew up in the Great Depression and there was an old saying back then, "Use it up and wear it out. Make it do or do without'.

[@kidkv]

An old book says about rusting the file and using a file card cleaner on it, I've tried it, it works.

[@rubenzampieri8127]

👏👏👏👏 Te felicito muy buen trabajo. Quedó como nueva. Saludos desde Buenos Aires 🇦🇷

[@InventorEye]

¡Muchísimas gracias por tus amables palabras desde Buenos Aires! Me alegra mucho que te haya gustado el video y que lo encuentres útil. ¡Estoy emocionado de poder compartir más contenido contigo en el futuro! ¡Gracias por ver y espero que te mantengas atento para más! ¡Saludos! 🎉👍

[@mikebauer4541]

Your title should be how to CLEAN and remove surface rust and dirt from a dirty rusted file, without a file card. Also claiming razor sharp??? You didn't sharpen anything, you just cleaned it. If you clean your file when you're done using them, they could last you a lifetime. Storage of file is just as important . I see guys with drawer of their toolbox loaded with a pile of files, and they wonder why most of them are not sharp anymore. Although it is better than some people I have worked with who clean their files on a spinning wire wheel on bench grinder. Please don't ever touch my files.

[@geertrebreps191]

Vollkommen korrekt!

[@chriserickson4417]

File card, okay, I didn't know what it was called for sure when I made my comment, but I have a file brush (card), has short metal bristles and gets the crud out from the cuts. Thanks for the correct name for that brush.

[@uwemaurer2027]

Das ist nicht ganz richtig , es fand keine mechanische Schärfung statt , sondern eine Schärfung durch Chemische Reaktionen . Es wurde schon Material gelöst und so die Kanten schärfer . Wir gehen im Handwerk immer von einer Mechanischen Schärfung wie Schleifen aus , aber es gibt auch andere Abtragsverfahren wie Laser , oder Chemisch wie hier gezeigt . Beim letzten Reinigungsgang war das gut zu erkennen !

[@seamusphelan228]

Agree a file card dies the job.

[@Notmanable]

😊​@@chriserickson4417

[@FernandoHenrique-cb4ng]

1 - limpe bem a lima com uma escova de aço. 2 - deixe-a por 12 horas imersa no caldo de limão. 3 - lave-a com água e sabão. 4 - enxágue e seque bem. 5 - aplique óleo spray.

[@InventorEye]

Thank you very much for your feedback! Stay tuned for more great content!❤😊

[@ricardomariani5178]

Es muy bueno devolverles la vida a las herramientas... y no tirarlas en un rincón 💪👍👌un fuerte saludo desde Uruguay 🇺🇾

[@InventorEye]

¡Totalmente de acuerdo! Devolverles vida a las herramientas es muy gratificante y práctico. ¡Gracias por tu apoyo desde Uruguay y por valorar ese enfoque! Estoy emocionado por compartir más consejos y técnicas contigo en futuros videos. ¡Gracias por ver y espero que te mantengas atento para más contenido! 💪👍👌❤😃

[@samesaw]

Use a brass brush instead of a toothbrush

[@InventorEye]

Thank you for watching, and stay tuned for more content!

[@psdaengr911]

Use a hardened wire steel brush .

[@nikitai.t.o.todoterreno5464]

a new file cost $3. bottle of vinegar $3, backing soda $1.5, plus 3 days and more to mess about. All that to have an used file?

[@kukipett]

A good quality file cost much more that that, probably 30$, well some harbor crap may cost 3$ but it wont last!

[@ZaraPoeta]

While looking at this.... that's my same thoughts...... don't forget the labor anand the 63+ hour's....trash the dam thing...

[@benholstad4343]

So true. However, it's obvious that it's not about obtaining a good file. It's about making a monetized video that has already gotten 100's of thousands of views in just a few days - which we have been pulled into like mouths to flame. d: )

[@ZaraPoeta]

Yha.... clearly we're the "usefull idiots"..... but the good news for me spesifically I see no ads.....so "zero dollars 4 dolph" on this 1....

[@chuckandjanegoodguys2451]

Let me know where you can find a 3.00 file 😂

[@whojahbless1560]

Bought a new file time is important to me. And doing all that just takes time.got more productive things to do.

[@itfzr-ek9qf]

Very knowledgeable and intresting ❤ Thanks for sharing 🎉

[@InventorEye]

Thank you for your kind words! I'm delighted that you found the video knowledgeable and interesting. Your support means a lot! 🎉. If there's something specific you're interested in, stay tuned for more insights! I'm here to share and explore more with you.❤❤

[@bozidarrastovic7885]

Majstorsko hvala Pozdrav iz Srbije ❤

[@StanislavVALIS]

Serbia? It's different, next to North Korea.

[@jolox.]

Nice music! Went well with the instructional video! I have lots of files from garage sales. This will come in useful! Thanks for posting!

[@charlescoker7752]

When I was in the US Navy 50 years ago. We were taught to use chalk to keep the file from rusting. Worked great. You take the chalk and rub it into the teeth of the file. Totally filling up the file's teeth.

[@mikeford5106]

the chalk is primarilly to stop the file clogging , particularly when filing soft metals.

[@antonioguariento880]

Não houve modificação alguma, apenas uma boa limoeza e propaganda do wd

[@InventorEye]

Muito obrigado por assistir e pelo seu apoio! O seu engajamento significa muito para nós. Fique atento para mais conteúdo interessante que está por vir! ❤❤😊

[@VictorKennedy-q6d]

Living half mile from my local Lowes store, I would have deposited the old file in the trash bin and purchased a replacement before I would have gone to this trouble.

[@nicholasbeck1558]

Great job! And an important tip: I really enjoyed your music and voiceless presentation; they made everything calmer and stress-free.

[@InventorEye]

Thank you so much for watching even more! Your support is greatly appreciated! Stay tuned for lots more exciting content coming your way! ❤😊

[@ramirovasquez8938]

Great job 👍😮😅😂👍

[@InventorEye]

Hi! 😄 Thanks a lot for your fantastic comment! I’m glad you enjoyed the video and found it entertaining. Your support and positive vibes mean a lot to me. Keep an eye out for more interesting content coming soon-I’ve got some exciting stuff in the works. Thanks again for being such an awesome part of the community!❤❤😊

[@bobbg9041]

In high-school my shop teacher said use lemon juice, but vinegar is an acid too. As far as using a toothbrush buy a card file. Wire brush used to clean files. The file wasn't dull it was full of rust deposits that clogged the fillets.

[@astonartigosesportivoseire2877]

Great tip! My grandfather made this using lemon juice that he had in abundance on the farm.

[@InventorEye]

That's amazing! It's wonderful how your grandfather used what he had to create something useful. Thank you for sharing! Thank you for watching, and stay tuned for more useful ideas and content every time!❤😊

[@CreativeTopTrick]

This innovative approach not only embraces the power of natural ingredients but also encourages sustainability by encouraging the reuse of products that would otherwise have been discarded.

[@InventorEye]

That's wonderful to hear! Thank you for highlighting the innovative use of natural ingredients and promoting sustainability by reusing discarded products.Thank you for your positive feedback! Your interest and support mean a lot!❤❤🎉

[@Ron-d2s]

@@InventorEye I've got a file almost exactly like that, maybe even worse. And after watching your video I realized how much I don't care about restoring it.... and how lazy I am.

[@АндрейКозлов-л4б]

​​@@InventorEyeА Нобелевскую премию за инновацию не дали?😂😂😂 Маразм.

[@InventorEye]

@user-wm3bf7pi3u Thank you for your honesty and reflection. Sometimes realizing our own tendencies can be a catalyst for growth.Stay tuned for more insights and motivation on our channel!👍👍❤

[@Ron-d2s]

@@InventorEye LAAAAAYYYYYYY ZEEEEEEEEEE ... but GL with it all ;-)

[@2shortplanks]

Thank you, looking after your tools is time well spent i have never seen this method before and cant wait to try out many thanks.

[@InventorEye]

Thank you for your enthusiastic comment! I'm delighted that you found the method useful and are eager to try it out. Thank you for watching, and stay tuned for more helpful tips and techniques!😊❤❤

[@josebonini6010]

Gran trabajo, hay veces que la herramienta lo justifica por su costo de nueva 👍👏👏😁🇺🇾

[@InventorEye]

¡Muchas gracias! Nos alegra mucho que encuentres útil el vídeo. Estén atentos para más contenido interesante.😊❤❤

[@justmeva]

WOW!!! Looks and cuts like new!! 👍💥

[@InventorEye]

WOW!!! Looks and cuts like new!! 👍💥 Fantastic! Thank you for your feedback! Stay tuned for more useful ideas and content! 😊👍💥

[@jtveg]

Thanks for sharing. 😉👌🏻

[@InventorEye]

Thanks! 😊 I’m glad you liked it. Stay tuned for more great content!

[@chriserickson4417]

Haven't you ever heard of a file cleaning brush. That's what they are made for, to get the crud out of the cuts. Thanks for the video.

[@tomdoty8334]

Yeah, a file card.

[@countryside8122]

@@tomdoty8334 Learned to use those in High School in woodworking class...lol

[@ИгорьМартынов-ь3ъ]

Доброго времени суток всем! Работа сделана и не вернуть того времени! Самое трудное это справиться с отходами химии так как она уже долго не пригодится в хозяйстве! За видео и работу спасибо!

[@b2yes]

Great video！

[@InventorEye]

Thank you! Cheers!😊❤

[@InventorJ88]

Where are you from? The way you do things is very convincing to me. I'll follow your example and recreate some of your ideas.❤❤❤

[@InventorEye]

Thank you for your kind words! I'm glad you find my approach convincing. Feel free to follow my example and recreate the techniques demonstrated in the videos. Thank you for watching, and stay tuned for more useful ideas and content! ❤️❤️❤️

[@tatodelgado2707]

Saludos desde Venezuela 🇻🇪 Yo las meto en jugo de limón que las cubra toda una noche, luego las lavo con agua, las seco y les pongo un tanto de aceite del mismo que usas para las máquinas de afeitar y listo. Quedan genial, bien limpias del óxido y sucio acumulado.👍👍👍🙏🙏🙏🇻🇪🇻🇪🇻🇪💪💪💪

[@InventorEye]

¡Muchas gracias por tus excelentes consejos! Es genial saber cómo limpiarlas tan bien usando jugo de limón y aceite. ¡Voy a probarlo! Gracias por ver el video y quedarte atento a más contenido. 💖❤😊

[@dano6943]

Congratulations you cleaned a file.

[@bobjimenez4464]

thanks for the video, I never would have thought of using acid to restore the cutting teeth of a file. : ) A good file is expensive and there is a tool designed to maintain it....the tool is a "file card" which is used to remove material embedded in the cutting teeth of the file.

[@InventorEye]

Thank you so much for your feedback! I'm glad you enjoyed it! Stay tuned for more excellent content coming your way!❤😊

[@lloydflorane3659]

,,,, ,show me what a fille card looks like.please

[@Rudimentary007]

Damn smart work.👍💪🇺🇸

[@InventorEye]

Thank you very much for your feedback! Stay tuned for more great content!❤😊

[@ЕленаВаракина-в3ц]

В камере -одиночке этим заниматься,там времени много,да и решётку потом пропилить.... 😊😊

[@brandynfrahm4837]

all these people really trying to crucify your vid 🤣💯 Looks good to me though👌

[@Mano-qw2ou]

Las personas no se dan cuenta que si afilaste las estrías con el tubo de cobre al bruñir las aristas.....Muy buena técnica, si funciona yo lo hago en ocaciones 👏👏👏👏👍

[@BWilly-tq6po]

I put rusty files in vinegar and let them soak for a few days. They clean right up like new. Use a file brush when you take them out. Soak as many as you can get in whatever you use. I fill a glass jar to the top with all files submerged. They will look like new.

[@Edwin-sr6be]

Y no es mas fácil y barato comprar una nueva lima, jeje, ...estoy bromeando, se te agradece el tutorial ( la enseñanza ).

[@InventorEye]

¡Hola! 😄 Me alegra que hayas disfrutado del tutorial, ¡y tu broma es muy divertida! Gracias por ver el video y por tus amables palabras. Tu apoyo significa mucho para mí. Mantente atento a más contenido interesante que estoy preparando. ¡Gracias por ser parte de la comunidad! 💖💖

[@int31cm]

well done, thank you!

[@InventorEye]

Thank you so much for your kind words! I'm glad you enjoyed the video. Stay tuned for more interesting content coming your way soon! Keep watching! 😊👍

[@davidgriego278]

I could have cleaned, and sharpened it; in less than an hour. With all the work, and time, you spent, it would have been easier to buy a new file!

[@amanami4126]

How would you do it?

[@davidgriego278]

@amanami4126 I would have used Baking Soda, and Vinegat to begin with, let it set for 2 hours, then dryed it it, and used W-D 40, and let it penetrate! I am sorry, if you thought I was being a Critic! Your method did give me ideas for using it!

[@aartdirks4188]

And that is less then one hour????​@@davidgriego278

[@steveolson69]

And then make a knife out of the old one!

[@davidgriego278]

@steveolson69 I have a Knife(s) I even made one, ptrobably not as Good as you can.

[@claylynn6391]

I thin it looks pretty darned good! I like it!

[@InventorEye]

Thank you so much for your fantastic feedback! We're delighted that you think it looks pretty darned good and that you liked it! Your positive comments inspire us to keep delivering great content. Stay tuned for more exciting videos and updates. Thanks a lot for watching and being a part of our community!❤💖

[@bobburnitt5761]

Try using a file card. If you card the file once in a while and keep it oiled with thin oil it will stay sharp for a long time. Then always use the file PROPERLY. Don't file on the back stroke The file card is just a fully looking wire brush MADE for cleaning and maintaining a file.

[@InventorEye]

Thank you so much for your feedback! I'm glad you enjoyed it! Stay tuned for more excellent content coming your way!❤😊

[@edgardodanielwitt725]

Muy bueno gracias!

[@carloszapparelli4074]

Excellente !!!

[@InventorEye]

Thank you so much for your feedback! I'm glad you enjoyed it! Stay tuned for more excellent content coming your way!❤😊

[@CarlosSanchez-kg6ux]

Buen día, mira ese metodo lo hacían los lamineros uojalateros en los años 50 usaban unas limas como de pulgada y cuarto las metían en una charolita o recipiente , con ácido muriatico rebajado le ponían unas gotas de metal llamado antimonio y la dejaban como mediahora la sacaban y lavaban con agua y tenias limas nuevas , yo era ayudante de mecánico 😅😅

[@kellymartin7474]

I liked the guitar solo and whistle

[@ianbruce6515]

Don't you realize that the part of the file that rusts away first is the sharp edge? If a file rusts--it is now blunt. Permanently. Removing the rust does not sharpen it The sharpness is gone forever.

[@InventorEye]

Thank you very much for your feedback! Stay tuned for more great content!❤😊

[@tribulationcoming]

Very good, Thanks.

[@InventorEye]

Thank you very much for your feedback! Stay tuned for more great content!❤😊

[@mrinventer360]

Great method. Thank you🤗🤗🤗

[@InventorEye]

I'm glad you found the method helpful! 😊 Thank you for watching! 🤗

[@pintakchan767]

Hard work really pay.

[@InventorEye]

Hi! Thanks a lot for your encouraging comment! It’s great to hear that you appreciate the hard work that goes into the videos. Your support really means a lot to me. Stay tuned for more interesting and exciting content-I can’t wait to share it with you. ❤😊

[@ljprep6250]

Yup, just like the professionals do, but with a slightly quicker acid. It eats metal away, so the sharpening is automatic. I didn't realize it cleaned and derusted files that well and will have to try this.

[@InventorEye]

Thank you very much for your feedback! Stay tuned for more great content!❤😊

[@MrForsmajor]

А какая ещё бывает напильник, кроме металлической? Неужели деревянная или пластиковая? 😂

[@AdaoFerreira-li2uf]

Não precisa fazer tudo isso, só colocar caldo de limão no canudo de pvc e deixar de um dia pra outro fica novinha, muito mais prático, faço sempre.

[@budmcnew7763]

Nice video but the cost of hydrochloric, vinegar, baking soda plus all the hours spent on it. Not only that it wasn't sharppen it was just thoroughly cleaned. I'll just purchase a new one. Can't be that expensive.

[@rccritch5505]

Wire brush same angle as the groove or make a knife later

[@sbkujur5536]

Improving sharpness by cleaning❤

[@marvinostman522]

It is a great video and it works. Now you need to learn how to prevent it from happening again. Don’t drag your file back across the work piece. That bends the sharp cutting-edge over making it dull. Also invest in a file card or a small wire brush. While you are filling fell for when the file fells like it hits a bump. That is a burr caught in the teeth of the file. Used the file card or wire brush to clean out the teeth. The WD40 is a good idea. The name WD40 stands for “water displacement formula 40. It will retard the rust process. Also keep some chalk handy especially if you are filling soft materials especially aluminum. It keeps the soft material from clogging the file which will also give you a smoother finish..

[@InventorEye]

Thank you very much for watching and for sharing such insightful tips with us! Your advice on file maintenance is invaluable and will certainly help improve our techniques. I truly appreciate your contributions. Stay tuned for more engaging content in the future! If you have any more tips or ideas you'd like to share or see covered in future videos, please feel free to let us know. Your feedback is always welcome!😊😊❤❤👍

[@zanderday4466]

and then store file back in its plastic holder it was sold in, so it doesn't bang around your tool box against other hardened steel objects - be nice to your files and they will be nice to you!

[@jordanscottmacaulay]

Can't remember the video but some youtuber did comprehensive testing of using a file like that and found quite the opposite.

[@fivecrosses9040]

Looks good. I think brake cleaner and a copper brush could have same results in a fraction of time.

[@CP-wh1md]

When does the sharpening happen? It’s clean but no more sharp than it was at the beginning.

[@InventorEye]

Thank you for watching, and stay tuned for more content!

[@leopeters5252]

what rockwell is the file? low rockwell files not worth it to start with

[@inventer369]

Thank you so much

[@InventorEye]

Thank you so much for your feedback! Stay tuned for more excellent content coming your way!❤😊

[@pedrotome9119]

What are the liquids you use here?? Thanks for the video!!! ❤❤

[@InventorEye]

Thanks for your interest! I used vinegar in the process. I'm glad you enjoyed the video! Stay tuned for more tips and techniques! ❤️

[@wh0tube]

Oh the copper pipe and old shoe trick! 😂

[@InventorEye]

Thank you so much for your feedback! Stay tuned for more updates and content. Thanks for watching!💖😃

[@jimschowe2770]

Brass is a better alternative to copper in the last stage of sharpening.

[@ManfredOelhaf-ft8wk]

Super Idee

[@InventorEye]

Thank you very much for your feedback! Stay tuned for more great content!❤😊

[@eniobolognesi102]

Gostei de ver o resultado e tenho linhas para fazer este processo!

[@InventorEye]

Fico muito feliz que tenha gostado do resultado! É ótimo saber que o vídeo foi útil para você. Muito obrigado por assistir e por deixar seu comentário. Continue acompanhando, pois teremos mais conteúdo em breve! 🎉❤😊

[@gersonrodrigues8425]

Só o trabalho e o gasto fica mais caro que uma nova😂😂😂😂😂

[@marciomanoel9202]

Quais produtos forma usados e por quanto tempo dura esse processo.

[@tecnologiasimprovisadas7333]

There is another process to clean and sharpen an old file very quickly, which consists of leaving the file immersed in pure lemon juice for twenty four hours and then washing it in running water to remove the acid from the lemon, washing it with liquid detergent and then drying it well with a cloth, spreading it on the Use a lot of wd file or any other release agent and let it dry in the sun, I can guarantee that the file will look like new. 👍

[@InventorEye]

Thank you so much for watching and sharing this valuable information with us! It's amazing how effective and practical these methods can be for cleaning and sharpening old files. Stay tuned for more interesting content coming your way! 👍

[@hansnelsen3960]

Idea being that the acid actually thins down the edges of the individual ridges on the file making them sharp again? Certainly cleaning always helps a dirty or rusty file, but sharpen it? I think a microscopic examination would be required to tell the truth of it

[@yusufarabac54]

Merhaba usta. Benim eye de hemen hemen aynı. Coca-Cola bu konuda etkili olur mu? Teşekkürler 🙏

[@InventorEye]

Merhaba! Yorumun için teşekkürler. Çok yakında daha ilgi çekici içerikler kanalımızda olacak. Takipte kalmayı ve videolarımızı izlemeye devam etmeyi unutmayın! 🙏😊

[@cliffhaskett7703]

Did we hear Axl Rose whistling " Patience " in the background ?

[@robertlundquist5450]

I use a copper penny with oil to remove rust from a gun barrel.

[@InventorEye]

Thanks for sharing your method! It's great to hear about different techniques for rust removal. I appreciate your attention to the video, and I hope you found it helpful. Stay tuned for more content and tips coming your way! 😊❤❤

[@DalecioDaSilvasouza]

Valeu pela dica

[@АлександрНиколаевичБорисен-л7й]

А может дешевле и быстрее купить новый напильник?

[@InventorEye]

Спасибо за ваш комментарий! Я ценю вашу точку зрения. Спасибо за просмотр и следите за обновлениями!❤😊

[@Serzh56ak]

После наших просмотров,купит обязательно😂😂

[@jorgealvaro6323]

🤣🤣🤣🤣Gracias, pero yo mejor me compro una nueva. Ni que costaran tanto🤣🤣🤣🤣

[@garbo8962]

A machnists told me over 50 years ago the way to sharpen a file is to place it in a container of acid. Never told me how long. Have 40 to 60 year old files from 4 to 10" long still fairly sharp because I store them on pulley lagging ( Grover rubber mat ) not touching another file and never place anything on top of them in one of my tool chest.

[@InventorEye]

Thanks so much for watching! Stay tuned for more awesome content coming your way! ❤

[@DalecioDaSilvasouza]

Recomendo espremer limão e colocar também um pouco de vinagre num recipiente e colocar a lima de milho pôr pelo menos um dia ou uma noite solta toda ferrugem

[@alexandremagno7247]

É mais fácil comprar outra lima nova 😂😂😂😂

[@InventorEye]

Muito obrigado por assistir! Fique ligado para mais conteúdo incrível chegando em sua direção! ❤

[@manoelferreiradeoliveira2145]

Meu pai ponhava pôr dois dias, em limão rosa puro, ficava zerada.!👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏

[@InventorEye]

Muito obrigado por assistir! Ficamos felizes em saber que gostou. Fique ligado para mais conteúdo interessante em breve! ❤❤😍

[@davidsilos7241]

I enjoyed the video despite what the experts say in the comments. I am going to try it. Thanks

[@josemaestro8088]

Esa lima estaba bien, solo sucia y oxidada

[@InventorEye]

Thank you so much for your feedback! I'm glad you enjoyed the video and are going to give it a try. Your support means a lot. Stay tuned for more content, and I hope you find the upcoming videos just as engaging! 😊👍❤❤

[@eduardopecchio6872]

Ficou limpa, mas por ser nova voltou a funcionar e nao foi afiada, nem sei se tem como afiar lima

[@InventorEye]

Muito obrigado por assistir! Fique ligado para mais conteúdo incrível chegando em sua direção! ❤

[@antonionetocomitre7598]

Não gasto com produtos químicos...uso apenas suco de limão....

[@sjww7503]

El WD40 es dios, es un líquido que me tiene impresionado

[@melodystaats5215]

Do they not have wire brushes in India?

[@tbcarleton]

Might I suggest evaporust?

[@InventorEye]

Thank you so much for your feedback! Stay tuned for more updates and content. Thanks for watching!

[@das250250]

Do the job properly , place in side a pipe with ends blocked so the file is entirely cleaned

[@leszekpaterek2389]

No dobra, ale co zrobić kiedy nie mam wolnego mokasyna???

[@MohamedGamal-zk4if]

He bought shoes 😂

[@leszekpaterek2389]

@@MohamedGamal-zk4if Pewnie masz rację 😁

[@okzeus2000]

You need a bench grinder with a wire wheel.

[@InventorEye]

Thanks so much for watching! Stay tuned for more awesome content coming your way! ❤

[@gregfrimodig5240]

Almost fell asleep, I'm going to buy a new file.

[@InventorEye]

❤👍

[@MrThemold]

Just 10 minutes with a file card will get you the results you want.😅

[@James-ru4jx]

You ever seen or heard of a file card ? 2 minutes and clean.

[@januariobifulco5547]

Quais produtos realmente são usados para limpar

[@InventorEye]

Muito obrigado por assistir!❤

[@syedabuthahir8289]

New one low price This working ?

[@InventorEye]

Thank you so much for your feedback! Stay tuned for more updates and content. Thanks for watching!

[@ozarked2363]

The best way to sharpen a dull file is to turn it into a knife. 😊

[@InventorEye]

Thanks for sharing and for watching the video! We appreciate your attention and support. Stay tuned for more tips and content coming soon! 😊❤❤

[@bretteee]

To keep files safe just put them in a filing cabinet, also use toothpaste to clean them because it works for my teeth. ?

[@InventorEye]

Thank you so much for your feedback! Stay tuned for more excellent content coming your way!❤😊

[@IA_Information_Paris]

Je ne savais même pas qu'une lime ça s'affûtait !!!!! Je pensais que c'était réservé aux ciseaux et aux couteaux !!! Il va falloir changer la définition dans les dictionnaires !! J'appelle de suite Larousse, le Petit Robert et l'Académie française !!

[@jamesk5172]

I use a file brush 😁

[@InventorEye]

Thank you so much for your feedback! I'm glad you enjoyed it! Stay tuned for more excellent content coming your way!❤😊

[@allredtail]

Just surprised a file card didn't come into play anywhere here.

[@nelsonsilvera8013]

Hay cepillos de alambre para limpiar los surcos de las limas