How To Sharpen A Step Drill! Even Professionals Don't Know This! Razor Sharp

[@kwkstar]

I worked as a Tool Maker for 40 years. I could sharpen this bit in 5 minutes by hand😮

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@aleksandrseregin1068]

Не всё такие мастера, как Вы!

[@nonRefundable444]

how by hand or grinder/drill

[@kwkstar]

@@nonRefundable444 It takes practice

[@terencephilipstrydom4838]

I agree, I used to use our workshop surface grinding machine...with white stone. Did a great job on his drill bits as well.

[@bobbg9041]

You can use a knife sharpening stone, or sand paper glued to glass Like a 3000 Emmy cloth. The correct way is a slow moving grinder used on tools. Even a dimond stone will keep the edge keen.

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! I would love to learn your methods! Wish you all the best!

[@normanlesmerises792]

The drill point tip is as important as the side surfaces. Sharpen the tip!

[@InventorSC]

Hello! Thanks for watching and sharing your great experience! I would love to learn your methods! Wish you all the best!

[@rogerboughner7842]

By grinding the flute back he probably did sharpen the tip. But it is hard to say how good of A job was done.

[@joequinn710]

fantastic great video

[@InventorSC]

Glad to hear that! Thanks for watching and sharing your feedbacks! Wish you all the best!

[@pawelg3800]

I'm sure I couldn't manage to do such a simple thing in a more complicated and bizarre way 🙂

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@cornfusedatbest3980]

😂😂😂 ya see what the guy did there pawelg3800? He makes money with EVERY comment whether good or bad. Regardless, sometimes they come up with something that's entertaining or maybe even useful. Food for thought.😜

[@РоманГромаковский-ъ5б]

Столько действий, для того чтобы просверлить деревяшку сверлом по металлу 😅😂

[@ЮрийШевчук-ш9з]

@@РоманГромаковский-ъ5б Оно,пожалуй , скорей только по дереву. Купил три штуки разных и убедился...

[@РоманГромаковский-ъ5б]

@@ЮрийШевчук-ш9з ну видимо не те свёрла вы купили Юрий, или не так применяете , они хорошо под импакты идут сверлят огонь 🔥, но могу из недорогих порекомендовать Матрикс 👍ну и Деволт конечно но те очень дорогие

[@richardkatzman1215]

Nicely done! I think a 3 part diamond files would work as well and takeoff just what you need to get it sharpened.

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@СергейАлексеев-с5т]

Умиляет, например, операция по зачистке остатков клея на подложке из фанеры. Просто перевернуть дощечку любой другой стороной не лучше? Но лайк заслужили. 👍

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@ilhanmutlu4336]

Merhaba ben Antalya/Türkiye de ikamet ediyorum teşekkür ederim.

[@InventorSC]

Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@nilsonprado5763]

A broca escalonada não é para iniciar o furo e sim para aumentar o furo 👍👍👍

[@InventorSC]

Thanks for watching and leaving your comments! Wish you all the best!

[@СергейПАРШИКОВ-л3м]

Специалисты по заточке инструментов посмотрев ролик сразу уволились с работы ! :))

[@ИгорьКарпов-л1о]

Согласен....

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! Can your share how you do it? I would love to learn your methods! Wish you all the best!

[@gillesklr650]

A good hand file would have been sufficient and a hell of a lot safer and less complicated.

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! Wish you all the best!

[@kwkstar]

Hand files do not work on hardened metal

[@bokiste7536]

it is not meant to drill wood, its for metal work. its obvious that you burn the drill( marks are visible) due work with wood. and first of all you didnt sharpen the point that tells you will again use it for wood

[@InventorSC]

Thanks for watching and leaving your comments! Wish you all the best!

[@Олег.Иванович]

Зачем вы сверлом по металлу сверлить дерево и почему вы заточили только одну сторону режущей кромки🤔⁉️

[@txno-pro]

После такой заточки им сверлить только дерево от металла они так же быстро затупится

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@metalwarrior4959]

Técnica guatemalteca,a finales del siglo XIX ya era usada,fue llevada con los descendientes mejicanós y de ahí se universalizó.

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@michaelschauseil6109]

Sehr gute Idee!

[@InventorSC]

Glad to hear that! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@rogerboughner7842]

As A professional you need some training on how it's done. You method did work, I will give you that. But insulting true professionals by saying we do not know how to sharpen A tool only shows your own lack of knowledge. And there are faster and better ways to do this.

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! I would love to learn your methods! Wish you all the best!

[@Redmi9a-sg9wk]

А ты на металле попробуй свою заточку,умник

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@alexv5481]

Во во

[@ДмитрийТолстой-ф5ъ]

Эта заточка и фанеру с трудом сверлит а металл даже тонкий это вообще капец . Не Хейтер но по видео понятно что результат не очень.

[@ЮрийШевчук-ш9з]

@@ДмитрийТолстой-ф5ъ Они только для фанеры и годятся...

[@StephenEllis-fq3nh]

He's to busy trying to sharpen his scissors after cutting the emery paper and it's supposed to be used dry.he also altered the cutting angle the edge had more taken off

[@PASHAI-x2b]

Как-же этот парень все усложняет.

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@stevelloyd5785]

Could drill a pilot hole, since most of the steps of the step drill looked to be unused and therefore still sharp

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! I would love to learn your methods! Wish you all the best!

[@nicolasthe4726]

Спасибо, принцип понятен, но делать я буду по другому.

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@ИванПетров-л5я7п]

Когда сверлить убедись что в ту сторону дрель крутит, а то и острым ничего не просверлить.

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@bryanherman1035]

"Creates a sort of Roloc disk for a 4 1/2 inch grinder with superglue and sandpaper (would like to see a video on how you sharpen those scissors, by the way), then proceeds to use said Roloc disk." Professionals "don't know how to do this" because they do it with a Roloc disk. Get some, it will open up a whole new world for you.

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@Niemals_Anal-lena]

Ich habe gerade meinen Kontoauszug mit WD40 eingesprüht, danach war da mehr drauf.

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@ダイハツ農協農耕車]

平のダイヤヤスリでやったら（100均）簡単にできるよ。

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@agn855]

Was ne geile Idee den Bohrerschaft mit dem Hammer seitlich abzuschlagen. Spätestens jetzt eiert der Bohrer und die ganze (unnötig komplexe) "Schärfaktion" war für die Tonne…

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@UdoWerder]

Holzleiste , Schleifband drauf kleben und die Kante darauf schärfen . 😊

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@Emilio421]

Para madera perfecto pero para metal una vez que se embote, poco hay que hacerle

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! Can your share how you do it? I would love to learn your methods! Wish you all the best!

[@anthoraviles4137]

Ciudad de México

[@InventorSC]

Hello! Nice to meet you! Glad to hear that! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@Mogutniy8h2]

Я давно так не смеялся !!!

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@トシ君-h2w]

サンダーにペーパー付けるのがいいのかな❓最初からオービルサンダーではダメなの❓

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! I would love to learn your methods! Wish you all the best!

[@viktorgrechin14]

...все просто -- необходимо прикупить инструмента ,по цене в десять раз дороже ,чем само ступенчатое сверло ,плюс работа ---- а в остальном ВСЕ ПРОСТО !!! 😂😂😂😂😂

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@СергейГаничев-ь1е]

А нельзя насадкой для фрезы?

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@zdenekjenacek302]

je potřeba se k vrtaku a všeobecně k nářadí chovat pěkně a ne ho mít samou korozi a špínu!!!!

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@markmawson1]

Just a bit of effort would have seen that step drill go through that wood

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@СергейЗемцов-э4л]

Пробовал много раз,как такие мастера советуют,по металлу это не поможет.Покупаю новые.Всем советую.

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@berndferger2767]

Gute Idee.Würde eine Diamant Feile auch funktionieren?

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@zohbasileiou7072]

From creece😅

[@InventorSC]

Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@zeriousvolt1245]

Really, really stupid and complicated idea, since it's only the tip that needs to be sharpened.

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! Can your share how you do it? I would love to learn your methods! Wish you all the best!

[@richards200]

You are correct in everything apart from only the tip needing to be sharpened. This is a step bit, each step needs to be sharp or it won't cut through.

[@serkorlist]

Жаль потраченного времени

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@ДмитрийКовалевский-х8к]

Именно так и затачивал мой дед.

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@OhYeah-me1cg]

Use a flap disc.

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! Wish you all the best!

[@davidhardaker192]

How to make a simple job ultra complex

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@clintonbutton712]

Pretty sure designed for thin sheet metal, not pine planks. I could blunt anything overheating it pushing through wrong material with no waste material movement designed into it.

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@bubbyscoresagain1720]

Perfect example of brain stem vs brain cells.

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@КостантинПилипенко]

Я оттуда откуда все люди.

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@markmawson1]

The operator doesn't even know how to use a drill correctly, he doesn't have it in drill mode he's got it in torque mode.

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@joshuabartley1279]

That's just so it don't break his hand when it grabs lol

[@johnhall8455]

How to turn a simple job into something really complicated…just fit a diamond disc..🙄

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! Wish you all the best!

[@JasonCouch-c9e]

The drill is running backwards to begin with

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@tomd6588]

Hyes professionals do know that but professionals don't use a butcher tool like that...they use the correct size

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@stewartbrand4086]

Step drill bits aren't ment for wood! Dress the tip and have fun!

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@richards200]

Using a spade bit, or a forstner, or an auger bit or even a holesaw instead of a bit thats meant for metal sheet would have been a lot quicker 🤣

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@후-두부]

녹 조심해

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@viki4837]

совсем бедный, диск на липучке купить не может!

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@viki4837]

@@InventorSC 🤛

[@sashapetrov6624]

С каждой такой заточкой диаметр сверла уменьшается.

[@InventorSC]

Glad to hear that! Thanks for watching and sharing your feedbacks! Wish you all the best!

[@СергейПомилуйко-ъ9е]

С чего вы взяли,что профессионалы этого не знают?

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@PromasterHOF]

If you would have added a little down force the first time you tried to drill the wood the bit would have worked

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! I appreciate that! Wish you all the best!

[@АлександрШалагин-ь2ъ]

Ещё шлифмашинку к рукам приклеил бы

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@정호균-r3q]

그라인더로 홈 벽에 붙여서 좀 갈면 됨..

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@ВалерийПешкин]

Такую хрень можно и спростым пильным диском по металлу провернуть.😂😂

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@VladimirShibichenko]

Нитрид титана снимается

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@karlnapf491]

3er set für 9,99 euro bei norma....😂😂😂😂😂😂

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@ВладимирСоколов-у4щ]

Сверло по металлу, что дерево и гвоздь просверлит. Видео для лайка , который и не получишь.

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! Can you share how you do it? I would love to learn your methods! Wish you all the best!

[@ВладимирЕмельянов-д6ч]

Зачем эти качели с доской!? Почему просто не зажать в тисках за хвостовик... ????

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@АлексейГуров-ы5ю]

Это слишком про то😂

[@uwegartner5572]

Bohr mal in Metall.

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@ralphnewcomejr]

I believe the phrase is ..."Count on stupid people to create stupid ways to fix a problem."

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@seregazolotoi9119]

Ступенчетое сверло это расходник, снялся титан - посадил сверло, выбрось не дуркуй купи новое, старое себя окупило...

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@ВладимирСоколов-у4щ]

Имею такое сверло, чушь полная , металл мягкий точил толку нет.

[@ВячеславАстахов-ы5ц]

Поколение ЕГЭ

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@jaquesNewimp]

C’est quoi ce bricolage Avec une mèche à tôle et pour la tôle pas pour du bois ne fait pas sa 😮😮😮😮

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! Can you share how you do it? I would love to learn your methods! Wish you all the best!

[@breezybmetal8646]

Seems like the tip was what was dull and I love the fact that it’s a harbor freight two dollar bit

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@carloszambrano6047]

Una manera de hacer las cosas fácil, complicándose la vida, demasiada tontería en un vídeo le faltó afilar la punta y rectificar los pasos porque también se afectan; con un esmeril y una piedra de grano fino, se consigue el mismo resultado, pero la verdad es mejor reemplazarlo.

[@InventorSC]

Thanks for watching and leaving your comments! Wish you all the best!

[@robbiexiong3508]

This is funny at best. Professional dont have time for this. If its dull buy a new one and don't waste time. This is for people too broke, have little options or just too cheap. Lol

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@MrKundala]

Ну что за тупое название?Профессионалы знают не только,как его заточить,но и как сделать.

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@임장사-o1g]

멀쩡한 센드페퍼 놔두고

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@ИгорьКарпенко-о9ы]

Дурости нет предела

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@andrelevoir9581]

avec un ponçeuse à bande cela aurait largement suffit à le faire que cette technique totalement debile mais bon. Pourquoi faire compliqué alors que cela aurait été plus simple.

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@timisprenger446]

was für ein Aufwand 🙈 habt ihr keine Feilen?

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@kz-ssd]

白背景に白文字…せっかくいい内容なのに

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@krivzerkrivzerov2998]

Кликбейт

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@0301052698009]

Wieso kaufst du nicht einfach einen neuen.....?

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@ИгорьЧехов-й1н]

Много лишнего

[@InventorSC]

Thanks for watching and sharing your feedbacks! Have a good day!

[@ИгорьЧехов-й1н]

@@InventorSC ответ нужно писать на русском языке

[@miguelmantecas2513]

Si no lo traducis al español no merece la pena ni mirarlo

[@InventorSC]

Hello! Thanks for watching and leaving your comments! Have a nice day!

[@덕-u1j]

놀고 자삐졌내 하나 새로 사람 너백수라 인건비 안나가냐?

[@InventorSC]

Thanks for watching and leaving your comments! Wish you all the best!

[@qwertymnbvc-k9x]

worst tool ever to sharpen a drillbit. get a diamond stone for 3$ and do it by hand in 5 minutes.

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@PeterSeifert-e9h]

Unsinn,nimm einfach einen Holzbohrer.

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@NahMaybe]

Dude step bits are not dripp bits the tips are blunt as they are ment to be used to enlarge existing holes. Learn how to use your tools before making a video about them

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@bobkillion9681]

The dumbest waste of time I’ve ever seen…flap disc …

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@piotrekchlebda939]

Fake video, everyone how has a minimum knowledge about machinning knows , that such bad guality sandpaper simply can't grind off such big amount of high speed steel with this precision, but it was already explained in some other comment, why somebody does that kind of videos.

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@elpadre7035]

Was für ein Schwachsinn. Einfach Feile oder ein Multifunktionswerkzeug hätte es auch getan und wäre deutlich schneller gegangen. Solche unsinnigen Videos sind echt keine Hilfe und gehören gelöscht

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@jurgenschomberg3707]

So ein Blödsinn die härte ist doch nicht mehr gegeben in Holz vielleicht aber alle anderen Materialien geht gar nicht. Müsste unter Hitze neu angelassen werden.

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@Tenko-Kuugen]

新品買え

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@titostsolias4039]

Bad video

[@InventorSC]

Hello! Thanks for watching and leaving your comments! Can you share how you do it? I would love to learn your methods! Have a nice day!

[@steelthunder76]

Bullshit

[@InventorSC]

Thanks for watching and leaving your comments! Have a good day!

[@shcherbaniuk4562]

ПЗДЦ! Нах такие сложности! Отрезной на болгарке или алмазный круг работают намного проще.

[@InventorSC]

Thanks for watching and leaving your comments! Wish you all the best!