How to Sharpen Chisels with Sandpaper

[@Paoson_Woodworking]

Chisel Sharpening Jig Plans: bit.ly/3fELutP

[@Безделию-НЕТ]

You show a good original ideas! Thanks! Glad to see your video from Siberia!

[@c-rod1403]

Very straight to the point. I love your voice. No nonsense, senseless, useless talking, love it. Glad i found your channel. Subscribed!!

[@therealsparkman]

And to think that I was toiling over what whetstone(s) to buy, and the cost of them overall because of the various grits to have. After watching this video, you have eased my mind and offered a quick and easy solution to sharpening my timber frame chisels. The beauty of this sandpaper process is, that you never have to spend time re-flattening caused by hollowing of the sharpening motion of the various sized tools. Plus, your surface (glass or otherwise) are always flat. Then, you just discard the used strips and start fresh the next time. Love it! Thanks for sharing! Cheers!

[@dervorrichtungsbauer]

Great idea. Many thanks for showing this. Regards, Arne

[@EricK-tb2dn]

Chisel is now sharper than when I bought it. Liked/subbed

[@user-OstroVityanin]

Спасибо за познавательное видео. И отдельная благодарность - за русские субтитры. Всех благ.

[@donovanlucibello6420]

Your channel is full of simple, but elegant brilliance - thank you for sharing your talent here with us!

[@СергейА-б3м]

Искренняя благодарность за русские субтитры. Подписан на вас, а сейчас с ними, ещё больше удовольствия от просмотра вашего контента. СПАСИБО!!!!!!!

[@СергейДрагун-ч9ф]

Всё просто, понятно, без использования дорогих приспособлений - великолепный ролик. Отдельное спасибо за русские субтитры.

[@ded_Fedor]

Самый лучший пример из тех, что я видел на эту тему!

[@independenttntn3276]

BRILLIANT!!!! You're ideas are awesome friend! Thank you!

[@AJIoH3o_XaPPuc]

Спасибо за видео! И спасибо за русские субтитры!

[@stewartmcmanus3991]

This is a great vid. I will do it this way tomorrow. About 20 blunt chisels, look out !!! Thanks mate, Stewie South Western Australia.

[@jasonthomas1760]

very simple and easy concept. much better than the jig\puzzle i came up with.

[@MaxBorges888]

Alles is eenvoudig, verstaanbaar, bekostigbaar! Dankie

[@shaver5959]

Brilliant, solved my sharpening problems at a stroke. I'm going out today to get a piece of granite. I wish you were close so I could buy you a beer !!!

[@Paoson_Woodworking]

thanks!

[@davidolson4058]

If you want to test whether or not you have gotten a blade in perfect alignment before going very far with the first sandpaper step: Put ink or thin layer of paint on the blade and do one or two passes on the sandpaper. Stop and inspect. You can determine then if further sandpaper passes are going to be of value. Felt tip pens or machinist lay-out fluid are both nice to use. Dykem is a brand name in the USA of layout fluid and gives good contrast between silver colored steel and dark blue.

[@Paoson_Woodworking]

It is a good idea, thanks!

[@davidolson4058]

A standard machine shop technique to sharpen tools. Same with knives, helical sharpened cutters, like a milling cutter, etc. The stone or abrasive does not good until it takes a bit off of the edge. The rest is just in-the-way.

[@ИванГурьев-ч3о]

Круто. Молодец мужик. Все просто и понятно. Спасибо.

[@rickprice407]

After a normal use you can likely get by with just your top 2 grits, especially if you add a strip of leather and some green or gold compound to strop on. Compound on the rough side of the leather and maybe 10 strokes and then a few stroke on the smooth side. This knocks off micro burrs and polishes the edge. It can also help to use a secondary bevel of 5° or so that you aren't sharpening (and removing metal from) the entire bevel each time. Nice sharpening jig by the way. May want to look at Matt Estlea's video on this type of jig to see how to make a jig to quickly set the angle on the blades.

[@marcelopazmino4861]

Muy buenas instrucciones, gracias por compartir, excelentes filos. Un saludo cordial desde Quito Ecuador.

[@antitheist9976]

Awesome tutorial, sharp and to the point :)

[@manueladrian6599]

A great detail the subtitles in Spanish, greetings from Spain

[@מיקלהציזק]

Ok.

[@מיקלהציזק]

Cezar eMiclea

[@מיקלהציזק]

Ok!!!

[@АлексейВикторович-ы8ы]

I liked the grinding drum very much.

[@Волоха-коп]

Станок мне понравился 👌!

[@tbc210]

I am a big fan of your projects and have followed your channel for a while. I notice you continue to improve the production quality of your videos as well. I hope that you will have great success with your channel! I also appreciate that you create videos in english, which I assume is not your native language. Thank you for that! I just thought I'd let you know - in english we pronounce the word "jagged" as "jah-ghed". Don't ask me why.. english is a strange language. Keep up the great work!

[@Paoson_Woodworking]

thanks for letting me know!

[@ИгорьЛитвиненко-л3у]

Все просто, понятно, доступно! Благодар

[@EstebanHerp]

Me encanta porque aquí en Costa Rica la gente siempre fabricó suspropias herramientas para trabajar ya que las herramientas salían muy caras. mi papá es un afilador profesional, ahora esta enfermo y probablemente las maquinas que el fabricó me van quedar a mi que soy el menor. son maquinas para afilar las sierras de banda gigantes de las aserraderos las que aserran troncos. yo fabrico muebles para salones de belleza .

[@Paoson_Woodworking]

espero que saques partido a esas herramientas!

[@datoall1648]

Another great vid, you make very good jigs

[@ogarridoa]

wonderful as usual. A stropping wheel would be a good addition and subject for a new video.. thanks

[@Paoson_Woodworking]

you're right, thanks!

[@RK-je9nc]

great video! can you please do one showing how to sharpen drill bits?

[@BDM_PT]

Hi there from Portugal, Nice :D Obrigado(Thanks)

[@forestlampcraft472]

COOL!!!

[@Alex_science]

Grear! Nice and simple.

[@nikolaystreletsky9064]

Good work!!!

[@tangowood]

Very precise and informative video. I will recommend your channel. Can you tell us how long the piece of sandpaper lasts with this method? And how much pressure do you use when going back and forth with chisel?

[@Paoson_Woodworking]

hi Morten, it takes little pressure, just the weight of your arms... With the sandpaper you can sharpen about ten chisels.

[@nicstr28]

Seems like the grinder could be skipped and do the entire job w just your jig. Nice vid👍

[@ЕвгенийБубнов-к5и]

Класс , спасибо за видео !👍

[@luissaya3882]

BRAVO, BUENA DEMOSTRACION !!!!!

[@thomasmarliere2505]

Thanks for the good advices 👍

[@jojosworkshop1344]

Thank you for this really good explanation.

[@deemdoubleu]

Love your jigs!

[@HyperactiveNeuron]

That's excellent! I love this jig. It's a simple design, easily adjustable and to use. I think this is on my to-do list now. One question, have you found the need to modify it to be able to lock the needed sharpening angle into place?

[@Paoson_Woodworking]

thanks! that would be an interesting improvement

[@SISTEM1976]

Nice job! 👍

[@reloda]

like C-ROD said: so simple and none of the waffle. Thanks

[@MagnusRex4]

cool. thanks for sharing. Is there any difference if you go above 2000 grit?

[@Paoson_Woodworking]

you can go with 2000 grit

[@MagnusRex4]

+Paoson WoodWorking thanks man

[@kalleklp7291]

Nice job. However, you shouldn't cut down in the stone with that knife...your stone will be scratched and the knife dulls immediately. I also use such a stone plate as a straight surface, when I have to align things for measuring and/or marking (I'm a machinist and blacksmith). The method you use in the video is also excellent for polishing small flanges, ferrules etc.

[@guaraguaoarcherycustombows3843]

excelente trabajo hermano! como siempre ;p saludos desde Santo Domingo

[@Paoson_Woodworking]

muchas gracias!

[@71PGA]

I would like a link for the double sided tape you're using.

[@jamesmcbeath9686]

Great craftsmen. Really impressed with the jig you built. Did you also make the grinder?

[@Paoson_Woodworking]

yes! check out my channel

[@Cactusworkshopchannel]

fantastic!!

[@Paoson_Woodworking]

thank you!

[@DrCRAZYde]

Nice video. Thank's for explain.

[@Paoson_Woodworking]

thanks!

[@juanjoseduran6325]

Un saludo, enhorabuena por el vídeo, esto es afilar con precisión.

[@Paoson_Woodworking]

gracias Juan

[@rickpick9058]

Helpful video! Can the coarse stage (320 grit) of this be done on regular sandpaper? that is, NOT wet/dry sandpaper?

[@Paoson_Woodworking]

you can also use wet/dry sandpaper

[@rickpick9058]

Thanks for your reply. I have wet/dry sandpaper ONLY in the finer grits. Just wondering if I could get by with regular dry "woodworking" sandpaper for the early stages, since that's all I have!

[@Paoson_Woodworking]

@@rickpick9058 you should use plenty of water for lubrication, so I do not advise you to use dry sandpaper. You could also start with P400 grit sandpaper or even more, it depends on the grit of your emery wheel. Try it with what you have

[@leksey7870]

A great way!

[@troppysholzhuette]

very nice... Fast sharp wood chisel... And I've paid so much money for the Triton TWSS10 lg Rene

[@Paoson_Woodworking]

thanks!

[@JoeGP]

very nice

[@Paoson_Woodworking]

thanks!

[@ПростоТолсто]

Мужик, ты красавчик.

[@matthewpalermo4957]

All videos on this topic use glass or stone as a flat surface. I am trying to find something like this but in the mean time would some plywood, MBF or pine work?

[@giancarlo4862]

Bravissimo.. ottimo !!

[@drfistus94]

Giancarlo Cortese spaghettisimo

[@trevordawson1947]

Great vıdeo.But how does the gap ın the wheel not flıp your chisel??????

[@Paoson_Woodworking]

with these revolutions that problem does not exist

[@ВалерийФедоровский-в3е]

Зачёт навсегда жаль что не поймет палец вверх,☝️👍👍👍👍👏👋👏👋

[@ГеннадийЖербаков]

Я в шоке от точильного круга с наждачной бумагой! Это же гениально!

[@иванфандорин-б1с]

Интересная приспособив для заточки ножей может ли она помочь в заточке ножа рубанка

[@pablorodriguezgarcia7605]

Xa chegou a demostración. O formato visual e moi atractivo, eu vexoo con subtítulos pero gustanme a voz en inglés polo tono e porque solo falta cando é necesario. O dito, sinxelo, fermoso e práctico.

[@Paoson_Woodworking]

moitas gracias Pablo!

[@enriquequintela4453]

Amazing wow.!!!!!!!!!

[@МиМиКа-п535]

Super!!!

[@T70781]

Thanks for the information. Do the last two grits make a noticeable difference after the first couple of cuts with the chisel? Thanks again.

[@Paoson_Woodworking]

you should try it, the difference is noticeable!

[@T70781]

Paoson WoodWorking okay, thanks again.

[@byrhanfatkylin8520]

какое счастье быть Амереканцем!

[@FajnyAleZaNiski]

Nice self-made tools. Sharpening anything on the any mechanical sand paper wheels can be dangerous if you cut the paper by mistake. I like your wooden-case for sharpening stone. I usually sharpen anything by hand manually with water stones. I have self-made wooden stand for a stone over the sink.

[@Paoson_Woodworking]

better to use sandpaper with cloth base, it's hard to break it. Thanks for comment!

[@FajnyAleZaNiski]

stone wheels are more safety, especially you have space in the wheel, I wouldn't risk like that

[@simonecamplani2430]

is there a jig that works with gouges?

[@Paoson_Woodworking]

can serve for some gouges...

[@SmallestWorkshopGH]

Thank you

[@luckystrike7045]

I like your chisel sharpening technique but I am unable to find wide, double sided tape. Can you share with me the manufacturer and type of tape you use. Thanks, LouS/

[@Paoson_Woodworking]

hello Lucky, as I say in the video you can use any adhesive tape to stick the sandpaper. Thanks!

[@ravenmooore]

What if I have a chipped off top? A tiny one? Do I just keep sharpening until the chisel shortens?

[@Paoson_Woodworking]

yes, unfortunately it is the solution

[@ДмитрийЖурков-и1е]

Всё доходчиво отлично

[@Paoson_Woodworking]

If you'd like to help me, you can upload subtitles in your own language following this link: kzbin.info_video?ref=share&v=BCOPtDcOKXk Puedes contribuir con subtítulos en tu idioma en el siguiente enlace:

[@Aleksandr_Solovov]

размеры абразивных зерен. время видео 3:54 (размер. на станке - 200). абразивная зернистость

[@Paoson_Woodworking]

here all that info: www.paoson.com/blog/en/how-to-sharpen-chisels-n77/

[@tedfinkenauer42]

Thank you!

[@arturpiekarski9683]

Nice job:)

[@Paoson_Woodworking]

thanks!

[@виталийанатольевич-м2ф]

молодец буржуй лайк однозначно

[@alpachino468]

How many chisels can you typically sharpen with each strip of sand paper?

[@Paoson_Woodworking]

If you clean them with water when you finish, you can reuse them and sharpen about 20 chisels

[@victorshimovolos1473]

Спасибо

[@ur5gcl90]

Greetings from Ukraine! You can open a hairdresser, shave customers, there will be a full house! You are the best!

[@juanjoseduran6325]

Un saludo, se agradece la traducción correcta al español.

[@hectorantoniocastro8410]

El anterior vídeo o lo pueden retransmitir en español?

[@tommylee85]

great! and pretty cheap!

[@bicicleta31]

how its made this machine and the discs

[@Paoson_Woodworking]

take a look: kzbin.info/www/bejne/eHSygad6mLR-js0

[@иванфандорин-б1с]

👍super🖐️👍

[@НесторМахно-б9с]

Какие номера наждачки рекомендует автор?

[@davidwolf6927]

I tried it for really old chisels and it took me many sand papers in order to take off the metal and sharpen it. the result is okay, but I don't think this method works when you want to take of a lot of material.

[@Paoson_Woodworking]

have you used the grinding wheel first?

[@davidwolf6927]

@@Paoson_Woodworking thanks for your reply. I don't have a grinding wheel unfortunately. but you are right, that would help :-) do you have any other suggestions. I need to remove a secondary bevel on the bottom flat side (spiegelseite, mirrorside) otherwise I am using tons for sand papers ;-) thanks for your video!

[@Paoson_Woodworking]

@@davidwolf6927 you could try to start with a very coarse sandpaper, for example P40. What grain are you starting with?

[@davidwolf6927]

@@Paoson_Woodworking I started with P400, I am going down in grain, thanks!

[@davidwolf6927]

@@Paoson_Woodworking I flattened the backside with P180 paper. This 10 year old, worn-out chisel looks like new. Took some time tough without having rougher paper. but still: great guide, thank. I was wondering how long you can use a sandpaper until it wears out. do the grains mix with the water and build a kind of foam? how do I know when to change the paper?

[@DonJohn87_YT]

Wouldn't it be better to use the belt sander for the first step?

[@Paoson_Woodworking]

two systems are valid, in my case my belt sander does not reach the necessary degrees

[@DonJohn87_YT]

Ah!

[@janakovalovska3143]

Like Your voice Bro!

[@quocvietdang8118]

cách mài dao với giấy nhám

[@Ph.tahaali]

2:35 when u nearly burn your shop!

[@Paoson_Woodworking]

you should always be careful with this type of work!

[@vannan3734]

Good

[@GWAIHIRKV]

Interesting.

[@gabrielamorales9296]

Okey

[@Sultan-r8h]

Моя жизнь до этого момента, была бессмысленной)

[@vasya118]

Wow!

[@MurphyTJ]

Poor hairs at 6:30!