I started shrink wrapping my boat several years ago because I didn't want to pay the high price to have someone do it for me. It really isn't all that hard if you take your time to prep prior to putting it on the boat.
Пікірлер: 51
@bucksgarage15 жыл бұрын
For anyone who sat through this I'm sorry I didnt fast forward and cut some of the slow stuff out.
@ccamstutz39334 жыл бұрын
From someone who does this professionally I can say you did a great job. It does help if you put your strapping around the boat first and just tuck the wrap then heat and grab. Will save u alot of time.
@bucksgarage14 жыл бұрын
I had a semi shitty comment on one of my videos and it brought me down a little. I have gotten much better and planned on making a better video. Thanks for the tip. I appreciate the comment.
@janveitch93092 жыл бұрын
Thanks for the tips. Your kids are pretty funny too!
@queeky003 жыл бұрын
My buddy has the actual heat gun. And man, they are expensive! He did my pontoon this year and told me the weed torch wouldn't work because it didn't have the wide spread end that fans the heat rather than so much direct. I guess he's wrong. You proved it! And I will be doing my own each year.
@bucksgarage13 жыл бұрын
After you get the hang of it you can do it in no time. Good luck.
@cierra4sale6 жыл бұрын
GREAT VIDEO. I WISH I HAD SEEN IT BEFORE I PURCHASED THAT $300 GUN. THE PROPANE WEED BURNER FROM HARBOR FREIGHT IS ONLY $29.00!!!
@bucksgarage16 жыл бұрын
Jesse Moore I would like to have that gun... just don't want to part with the money.
@wguisbert543 жыл бұрын
@@bucksgarage1 No! Yours is much faster! I have that gun, I'm gonna buy Harbor freight gun. I'm sure it's gonna be a learning curve, but being a "seasoned citizen" my arms and shoulders ache to the point that I do half the boat, and let my "old buddy" do the other half!
@pjdlugework5 жыл бұрын
I was wondering if I could use my Harbor Freight torch, and the answer is yes.
@JamesMyers2305 жыл бұрын
This really helps me. I am going to shrink wrap myself this year as it costs $450+ to have it done where I live. I guess you don't have to worry about snow load where you are?
@bucksgarage15 жыл бұрын
We rarely get over 5 inches of snow at a time.
@josephbailey19954 жыл бұрын
Thanks this video was a great help!
@fishyhobby36976 жыл бұрын
Clever and frugal ideas, Thanks, Cheers!
@tvmanjon4 жыл бұрын
Thanks for sharing the video did you watch Mr shrink wrap before you did this or some other training video
@bucksgarage14 жыл бұрын
I watched the Dr Shrink one with the $500 propane shrink gun and figured I could do it just as easy my way. Since my video i have gotten far better at it. Back then I felt like I needed to shrink the whole cover when in actuality you just need to shrink the loose parts and they pull the whole thing tight. Thanks for watching
@AK-kj6ec6 жыл бұрын
Very helpful, Thank you!!!
@bobsxtra61883 жыл бұрын
Thanks I'm going to give this a shot. Has anyone tried squishing the weed torch end in a vise to flatten it out more like the gun?
@bucksgarage13 жыл бұрын
I dont see why that wouldnt work.
@bobsxtra61883 жыл бұрын
Did it today, wasn't very hard. The biggest trick was getting used to the distance and heat level of the torch.
@jonathanbond4739 Жыл бұрын
Ok job for someone who is just learning
@chrisburton96595 жыл бұрын
Awesome video. Thanks!
@redveiner2 жыл бұрын
Is that your bimini top lowered on the boat that is bracing up the shrink wrap? Is it a canvas top? The dealer made a big deal of all the work framing with wood strapping to hold up the SW. He complained tha he should get a lot more money to SW!
@bucksgarage12 жыл бұрын
It's just a aluminum Bimini top. On other boats I use a few 4x4s to make a tent setup.
@jamesmoran56626 жыл бұрын
Thanks man
@stogierogy7 жыл бұрын
great job!
@jamesmoran56626 жыл бұрын
Can I buy the 6mil stuff and be fine or go with the 7mil thickness??
@hugohugasian46693 жыл бұрын
THATS WHAT SHE SAID!!! LMAO. Too funny..
@galendavis66515 жыл бұрын
Would a heat gun work the same?
@bucksgarage15 жыл бұрын
Yes it would. I originally tried to use a heat gun but it was taking an unreasonable amount of time. I'm talking hours vs minutes.
@tonysantiago78907 ай бұрын
The sheet was too small of a piece of plastic
@tstevens037 жыл бұрын
how big of roll of shrinkwrap did you buy
@bucksgarage17 жыл бұрын
Tim Stevens I believe it's 14 by 150 I got it off Amazon for $150.
@bucksgarage17 жыл бұрын
For me it's worth it to buy it in a full size roll so I can get at least 5 wraps out of it.
@tstevens037 жыл бұрын
thank you
@chrisvr66 жыл бұрын
Good job. How expensive is that gun?
@DE-mr3vp4 жыл бұрын
Can you put links on for the wrap material that you purchased from amazon, and the weed burner?
@picklechips10896 жыл бұрын
HAHAHAHAHA
@bucksgarage16 жыл бұрын
jon nummer not sure what's so funny? I have done this for 10 years now with no issue..
@cierra4sale6 жыл бұрын
GREAT VIDEO. I WISH I HAD SEEN IT BEFORE I PURCHASED THAT $300 GUN. THE PROPANE WEED BURNER FROM HARBOR FREIGHT IS ONLY $29.00!!!