how to siphon gas from any vehicle easily

This is by far the easiest way to siphon fuel from any vehicle. Using the vehicles fuel pump to pump the fuel into a container requires almost no work and no getting gas in your mouth! This method also works on newer cars that have a ball valve in the fuel system that stops you from using a hose and siphoning the gas from the fill hole.
Fluke 117 Digital Multimeter (Amazon Affiliate link)
amzn.to/2JmWvCG
Find me on Facebook at Facebook.com/BillTheTractorMan

[@flyzone100]

We all know how to hold a hose and put gas in a can. What we don't know is how to find the proper connection point and jump the circuit. This wasn't much help.

[@jspooner0605]

Bloody oath mate

[@lonismith6491]

Same

[@lonismith6491]

kzbin.info/www/bejne/rqGroqWXhMmAetU

[@ADMAFIA210]

I used the paper clip trick on my dodge neon on the fuel rely

[@4petesakemusic]

Maybe don’t be so lazy and figure it out lol

[@PoeLemic]

Thanks for showing how to do this. I've been cited by the damned CODE ENFORCEMENT in my city for having a vehicle that has tags that are expired. Someone (probably one of my god-damned neighbors) called them, so I've got to get it running and get it inspected by the upcoming Court Date. So, I thank you for showing how to siphon the gas. I sure hope that I can figure it out and get my vehicle inspected by the date they gave me.

[@sonny2435]

Dr Emmet Brown; you do realize that is pumping the gas out NOT siphoning ( negative pressure)

[@outofluck1001]

I seen the Minnesota license plate and the TC hat I take it you're from Minnesota LOL I'm born and raised from St Paul I love the video keep them coming ✌️💛😁

[@BillTheTractorMan]

Thanks! I spent the school year on the north side of Minneapolis, summers on the farm with my grandparents. Now I'm in central Minnesota.

[@outofluck1001]

@@BillTheTractorMan me also had to get my family out of St Paul now I'm in Blaine MN

[@9m9e9]

One job Danny one job

[@curiosity2314]

Well it would have been good if you had shown hooking up to the test port.

[@christianblunt]

I came here to say exactly this. No idea where to jump from/to. So, this video is absolutely useless to me.

[@cryptobigboss]

thank you so much for this video!!! saved me in a pinch, super easy too.

[@uawsux]

If you Yank the relay the two horizontal blades should be the hot to the relay there is a schematic on the back of the relay that will show you which one to bypass....... If you ever have a problem with good battery good lights cranks no start remove your horn relay and replace it PCM relay your horn won't blow but your car will start be a good idea to keep her a couple of those relays hanging around

[@MD-kf5er]

clear as mud. glad the video was only 2 minutes long

[@k3ntofficialmusic]

Danny's hair is incredible.

[@DaveSteen]

Great video, another thing you could do is get an old relay and force it on to plug into the socket if you need to do this a lot

[@michaelkulman7095]

So did you remove the innards of the Schrader valve with a tire valve tool then and then attach the hose? I assume so. I assume you depressurized the system first... I liked the video but worry you left some things out people won't know or understand. So I'd suggest other videos be looked at two. Just saying... Also some relays have a diagram that show the switch you need to jump symbolically. Some relays have a top that you can lift to switch it without a jumper wire. And for those not sure about how to jump the relay you could turn the key on and off repeatedly but that is tedious... I still found the video helpful, especially in finding which contacts to jump based on which give you voltage which could even be done with a simple 12 volt test light.

[@false-flagburner4184]

with the black hose and black under the hood I cannot see at all where you plugged in to the other side of the hose. The most important part, is where is the port on the fuel rail? And other vehicles will not be the same either.

[@moonriderfast1210]

Exactly!!!!!!

[@gman3747]

Was great simple video but you neglected to show us the part were you actually connected the jumper wire? was in your hand one min then the next was in fuse box. watching you do that would have made this an ace in the hole video . Do not want to cross wrong wires or have them fall off and connect to wrong post and fry something. but thanks for the hose hook up demo that is self explanatory for most but again failed to show you doing it for better clarification.

[@BillTheTractorMan]

Reason for that is so that the viewer researches his or her own vehicle to make sure they put the wires in the right place for their vehicle. Many vehicles are different.

[@leperchauntripod]

Yeah this is great, if the damn pump works.

[@BillTheTractorMan]

Yes, unfortunately that can be a problem some times.

[@LanternComics-2814]

Nice, but where is the fuel rail? You’ve got umpteen hoses there and can’t tell where anything is connected.

[@lufknuht5960]

So after you probed & found voltage (8V in this case), you shorted out those two points? Then turning on ignition made fuel pump? So wherever you find that voltage, you could run a short between that point & ground? What were you probing? -- the assembly around a fuel pump relay?

[@michaelkulman7095]

The ports that the relay plugs into is what he was probing.

[@cryptobigboss]

dont need ignition switch turned on, it will start pumping as soon as you bridge the two connections!!

[@kyleesmythe6694]

Yea the easy way

[@imleany4286]

Time to go get some gas

[@trevorburger95]

Dammit Danny

[@uvuvwevwevweonyetenyevweug2676]

Who shot your battery?

[@bigrod0069]

Should've showed which ones for relay

[@BillTheTractorMan]

I purposely left out a few pieces of information for various reasons. The Schrader valve will be in various places on the fuel rail depending on make and model of the vehicle. If I spent the extra time explaining where this vehicle has it, folks would still be mad their's is different. Also, for the relay, if you're not knowledgeable on its function to understand what I'm doing, for your safety and to prevent damage, I suggest researching further.

[@lynzblk]

Hey so your making it to where ur forcing the fuel pump to kick in once u turn the key but not to start the motor it’s only starting the fuel pump ?

[@ARCSTREAMS]

@@lynzblk i think so but what about this schrader valve thing? i thought all you need to do is put a hose on the fuel line before it goes to the engine rail

[@ARCSTREAMS]

can you not just look up where the pump relay is in the manual?

[@genericdude6551]

That's fine if your fuel pump still works.

[@philipnehri1773]

Enjoy your low key style...I have a bad fuel pump in my van and I have to get about 25 gallons out of the tank

[@sir-mittler8210]

So what did you end up doing? I have the same problem.

[@Munkendrunky]

@@sir-mittler8210 So what did you end up doing? I have the same problem too.

[@98chicagobears]

hey bill can i do this with a 1992 oldsmobile or can i still sypher gas on this car from the gas tank with a hose.

[@leb7860]

Doesn’t work with a bad fuel pump

[@theworstgamervr]

This Danny guy always fuckin around. Spilling gas in this day and age smh

[@toddrhine7648]

Hi Bill, really liked your video here. Have a question for yah. I have a older 1993 Jeep GC Laredo I6 4.0. I already have this ready to go but I would like to have it siphoned/forced out from near the fuel filter into several gas cans under the Jeep. My fuel line is already flushed out from the fuel rail down to (just b4 the fuel filter) with 99% Isopropyl Alcohol. Is this the same procedure or different as I would like to do it in my application here? Hope you or someone with expertise can help me here, thx much for your time also. I just subscribed and liked your channel

[@BillTheTractorMan]

If you disconnect the line going into the fuel filter, and set it to drain into a can. Then use this method it will use the fuel pump to pump the fuel into your can. Side note, last weekend I just put a battery in this truck and it fired right up. Has not been started in 5yrs. The gas in it is 5yrs old.

[@toddrhine7648]

@@BillTheTractorMan Thx bud. Yeah, mine has been sitting for yrs also but we do have a high humidity rate here and who knows what is sitting in the bottom of our tanks.

[@LilElfinmajk]

Is it really necessary to remove the relay switch

[@user-hv4pu1zi8k]

The way to do it ,is a locking gas cap

[@saltymofo5870]

Pumping is not siphoning

[@honeybear8485]

I don't know maybe I'm doing something wrong but it's not working it it is bypassing the fuel pump it's actually making it run with the wire but it's not sucking out the gas is there something else you have to do to the Schrader valve????

[@BillTheTractorMan]

Did you remove the core?

[@dirtyaznstyle4156]

Hahahahaha yeah....

[@WV591]

easily?

[@sonny8598]

Bill, Can I not just use the installed Fuel Pump Relay, connect the rubber fuel line hose to an outside container Then turning on ignition switch to on.

[@markb6156]

No. The computer will turn off the relay after about 3 seconds if the vehicle doesn't start. Jumping the relay contacts keeps the pump running as long as the key is supplying power.

[@ARCSTREAMS]

@@markb6156 thats why some ppl turn the key on and off but that is foolish when you can juts bypass the relay with a paper clip right

[@chevinbarghest8453]

"any vehicle ? don't think so...My Deere Lawn tractor has a mechanical pump mounted on the engine. It only works when the engine is running

[@1969mikemac]

omg... no shit... i need to empty my fuel tank because my pump isn't working

[@georgec8506]

Good working method but you are using the car's fuel pump not a siphon to get the fuel out

[@BillTheTractorMan]

You are right, however I wanted to use a title that would make it easier for people to find this video.

[@davidrhelmick72]

Why do you have to mess with the relay?can't you just turn the key and let it flow or will you the pump shut down because of some computer activity?

[@BillTheTractorMan]

In my experience some vehicles will pump for only a second or two then stop unless you jumper the relay to keep the pump running.

[@J.Sanity]

Too bad this is not siphoning... this is pumping with an electrical pump that is hooked into the system...

[@Michael_Lorenson]

Thanks!

[@1glopz]

Great if your pump works

[@keeponcruisin7876]

Poor Danny. Must be so few people to choose from for friends. Cause Billy sure doesn't talk respectful toward him. I'd be a vapor before he knew it if he talked to me that way. Thanks for confirming pump out gas theory Billy. Got an old W124 thats been sitting for 3 years imma rescue.

[@BillTheTractorMan]

We are brothers, and we always pick on each other. We just brought home another project today to work on. 👍

[@keeponcruisin7876]

@@BillTheTractorMan stop doing it. It's shitty. Be a positive influence. No one enjoys being called a retard.

[@Mwfrizzellandsons]

Suppose the pump is dead? Ugh

[@dakotahoffman7475]

This won't work on a 2004 Ford f150 there is no relay for the fuel pump

[@EverBarbero]

No fuel pump relay for Jeep Liberty either, it is integrated with other stuff, what can I do then?

[@sonny8598]

Bill Bypassing the relay Can you siphon gas out even without the fuel pump ?

[@BillTheTractorMan]

No, the fuel pump is what is moving the fuel up to the engine compartment.

[@patsuddarth1093]

Nice video, would I be able to use this method on my Chevy Express Van? It's a V8 4.8L

[@BillTheTractorMan]

Should

[@patsuddarth1093]

@@BillTheTractorMan , ok cool. Thanks.

[@franciscallahan4213]

Great idea but how can you do this on a 2009 or 2016 F150? Really appreciate any feedback

[@BillTheTractorMan]

Pretty much the same way, you will just have to figure out the right spots in the relay for the Ford

[@franciscallahan4213]

@@BillTheTractorMan yeah on the 09 I believe theirs a Schrader valve on the fuel rail to hook a line to but I'm not sure I can find that on the 16. I think these vehicles have a fuel pump module though so not sure if that would prevent me from pumping that gas out easily

[@BillTheTractorMan]

@@franciscallahan4213 should still have a shrader valve, needed for mechanics to bleed the system and diagnostics.

[@franciscallahan4213]

@@BillTheTractorMan thanks!

[@BillTheTractorMan]

@@franciscallahan4213 no problem!

[@iamyzdemon5717]

It's now 2021 we have the excuse of emptying bad gas cause people would report us to the FBI

[@colinheppell5020]

Easy way? I’m here cause my car tires flat i don’t wanna be (running a spare I wanna go fast) my parents outta town and I need gas in the other car but I’m broke.

[@dustintunis9347]

That doesn't help when there's no Schrader valve. I've looked before and my 03 Astro doesn't have an easy way to test fuel pressure.

[@BillTheTractorMan]

Quick Google search, and I found a picture of where it is. Should have no problem getting some rubber fuel line on it for this process.

[@raymcclinton1086]

Will this technique damage the fuel pump/filters if the fuel is several years old?

[@BillTheTractorMan]

It shouldn't. Unless you have something where the fuel is gelled. In that case it would be obvious it is not flowing and you should discontinue using this method. You will need to disassemble and clean fuel system components.

[@toddrhine7648]

Just make sure you "STOP the process IMMEDIATELY" when you see no more fuel is coming out from the end of the hose. Otherwise, you will burn up your fuel pump!

[@tomdurkins]

Who else is here because we’re now living in Joe Biden’s America? Where 99% of gas stations are out of fuel. Welcome to our new third world country.

[@BillTheTractorMan]

Glad I could be of assistance! I forgot I even made this video until I seen your comment come up. Thanks for watching.

[@cheyenneindian4885]

um ? go eat farm eggs+ Twinkies,,, UM ? DID U SHOW ANYONE HOW TO INSTALL THE JUMP WIRE?

[@gregoryratliff73]

i’m assuming you took the valve core out” ??

[@BillTheTractorMan]

Yes, we remover the valve core.

[@gregoryratliff73]

@@BillTheTractorMan thanks

[@knaggs71]

Can’t you just turn the key to acc to turn on fuel pump?

[@BillTheTractorMan]

Not all vehicles will do that. The computer only runs the pump long enough to build some pressure to start, if the engine doesn't start the pump won't stay on.

[@lwh7301]

How did you get voltage with the battery removed?

[@BillTheTractorMan]

I ended up using a jump pack

[@Don-qr1nd]

Why this video got so many views lmao criminals…

[@BillTheTractorMan]

It surprises me too! I was just trying to make something a little informal and memories with my brother. I have cancer, and some day, my kids might have just these videos to remember me by. The ad revenue helps with the medical bills, though. So I definitely appreciate it.

[@YouSoPoor]

I know an easier method.. you just may get a mouthful of gasoline. 👍

[@BillTheTractorMan]

Doesn't work very well in newer vehicles that have anti-syphon devices. All those crafty teenagers in the 80's screwed that one up for us.

[@truhunk1]

Nah. A mouthfull of gas is easier.

[@TRPufnStuf]

Oh thats easy. Cause everyone has that stuff. Lol

[@BillTheTractorMan]

This stuff is definitely not hard to get. Just about every farm and fleet store or auto parts store has wire and rubber fuel line. I buy fuel line and wire in bulk, but a small spool of wire is under $5 and 4ft of fuel line would be about $6

[@elgatoJNF]

That is not siphoning that is pumping.

[@tomgeezer2342]

???

[@thedevinefeminine]

Yeah cause I own that gadget 🙄

[@baenschman6756]

dump