How to splice TEUFELBERGER drenaLINE - spLIFE program

[@meirdeaph]

Process perfect 👌 ❤🙏

[@stuartporter5428]

My life has been litterally hanging on these. I think I'll leave it to the experts!

[@JeanBenoitFOURNIER]

Well, I guess I'm just going to make a big knot and that'll be it... ;)

[@diegofernandovargas2655]

Muy buenos días Dios lo bendiga felicitaciones excelente video pregunta de cuánto queda la recistencis del ojo muchas gracias feliz día espero pronta respuesta

[@TeufelbergerGroup]

Hola Diego, gracias por tu comentario y la resistencia mínima del ojo en este caso es de 4 495 lbf. Todos esos detalles los puedes encontrar también en nuestra web aquí aquí en la sección variedades y especificación: www.teufelberger.com/en/drenaline.html :-)

[@CFunes37]

Can the same process be used for rope KM III?

[@carlcox7332]

Ive been searching for the same thing. Only option I could find when I bought the rope was a sewn eye. So thinking its non splicible

[@albertoramos7084]

That rope is not posible to splice.

[@lautonsutley3760]

would this splice work on Mammut Performance static 10mm?

[@TeufelbergerGroup]

Hi. This splice was developed especially for our treecare ropes drenaline and tachyon and can't be done on other ropes so far. Sorry. :-)

[@stevebarratt888]

What splice would you use for ocean vectran 6mm?

[@TeufelbergerGroup]

Unfortunately there is no certified splice available for the ocean vectran

[@lancerudy9934]

What are the measurements for each art of the splice? Thanks😊

[@TeufelbergerGroup]

you can find it here www.teufelberger.com/pub/media/contentmanager/content//downloads//spLIFE_drenaLINE_splicing_instruction_2.pdf

[@cerberusbonsaiarboricultur774]

Would love to see the summary/description ^above include a link to the actual written instructions because you realllly need both the video *and* the written to pull this on 1st-try if not familiar w/ this type of splice (I'm actually using it on a different kernmantle that's a 'non-spliceable' I was determined to get spliced!) I see you guys down-grade splices VERY aggressively while Samson/Yale/etc seem to downgrade a spliced-rope by maybe 10% max, would love to know what accounts for this discrepency! I can't help but wonder if it's more of a symbolic rating since instruction-variation, splicer-error etc has to be given some non-zero values against a splice...but if done perfect it's hard to think you can't reliably get nearly-100% eye-splices if each 'leg' of the eye is only needed to be 50% of rope-ABS to not be weaker-than the rope, wouldn't it be more about doing a longer pre-crossover section *and* a crossover that's achieving sufficient 'bite' while being a longer crossover with a more-gradual merge inside.. Anyways thanks a ton for these instructions, I had 1 mess-up in 3 attempts (attempt #2) but as mentioned I'm splicing a different rope so am adapting/modifying these directions as well as modifying them to improve-on the splice (making lanyards w/ numbered splices on each end, so when putting these eye&eye ropes in a machine it'll be obvious which splice 'wins' so I can at leas break 6k if I can't get splices to-spec which is 8.6k for my rope..I suspect just minimal-modification copying of ^Drena's instructions' splices are giving at least 3/4 strength w/o any attempts to "improve" it / only trying to successfully complete splice)

[@hagenhagenwidder8571]

Wird nicht durch die Reduzierung der weggeschnittenen Stränge an der Öse die Tragkraft reduziert? 😮 Sieht zum Schluss schön aus, aber ein Viertel des tragenden Materials ist ja weg 🗑... 🤔

[@El22locuras]

What’s the measurements?

[@TeufelbergerGroup]

Hello you can find it inside the PDF splicing instructions available here : www.teufelberger.com/en/products-services/tree-care/application-specific-menu-treecare/splife-program.html

[@lunchbreakmedia5410]

Sounds like an 90s skin flick

[@El22locuras]

You guys should talk and say how to do it

[@TeufelbergerGroup]

hi , there is pdf splicing instruction available here : www.teufelberger.com/en/products-services/tree-care/application-specific-menu-treecare/splife-program.html

[@christophersprague1279]

You should make a video actually explaining the process.. how do you expect people to see your measurements and stuff like that?

[@meirdeaph]

You can see the tape marks on the ruler 📏

[@kenwood2242]

Hatte bereits zweimal eine enorme Kern Mantel Verschiebung auf diesem Seil. Ich schwöre normalerweise auf Teufelberger Equipment Treemagineers sowieso.Nichts für ungut aber das hat mich wirklich sehr enttäuscht.

[@slaxxx]

This is a pretty terrible how to. How about some explanation, instructions?

[@TeufelbergerGroup]

here a video with explaination kzbin.info/www/bejne/gF6keoGjj8qDg5Y

[@Eric-de4fw]

Most confusing video I’ve ever watched

[@TeufelbergerGroup]

Why ? explain us like that we'll be to improve it.

[@cerberusbonsaiarboricultur774]

See accompanying written literature otherwise dunno WTH you thought you could do with that^!! W/ the writtens + video it's easy as sin, takes a minute but is far simpler & more straightforward than, say, pretty much *any* chainsaw repairs I've ever done! (actually I was adapting it to a different kernmantle so would be even quicker if actually doing Drenaline) It's not splicing an eye in 3/4 TEC but it's not like putting an eye in Blue Moon, either.

[@saggybobbler]

🤣🤣