How To: SRAM AXS Eagle Drivetrain Install & Setup (Step-by-Step)

00:00 Intro
00:29 Parts and Tools
00:56 Install Cassette
2:00 Install Crankset
4:34 Install Rear Derailleur
5:14 Install Controller
6:10 Install Rear Derailleur Battery
6:31Pairing Derailleur and Controller
8:22 Linking to the AXS App & the different modes
9:54 Install Chain
12:34 Derailleur B Tension Tool
14:59 Derailleur Limit Adjustments
17:42 Micro Adjustments
We’re back with an updated video showing you how to install SRAM AXS Eagle MTB Drivetrain. SRAM’s wireless electronic mountain bike drivetrain (available in XX1 and X01) includes the controller, crankset, rear derailleur, chain, and cassette has been available for a little while now but there have been a few changes in the lineup. One of which is the new 12 speed 10-52t cassette which now gives you a 520% gear range. Even though there are no cables to install, there are some new things to consider with the larger cassette during the setup process. Liam, our head mechanic walks us through the entire SRAM Eagle AXS installation and setup to get you back out on the trail without unnecessary headaches. Grab your steed, tools, and a cold one. Enjoy!
Recommended Tools:
Cassette Tool
3mm, 5mm, and 8mm Allen Wrenches
T8 and T25 Torx
Chain Breaker
Park Tools AWS-7 3-Way wrench (5mm Allen & T25 Torx)
SRAM B-Tension Tool
Assembly Grease
Rubber Gloves
Visit our blog article for more information: www.worldwidecyclery.com/blog...
Shop SRAM Eagle AXS: www.worldwidecyclery.com/coll...
Check out our Bottom Bracket Maintenance video: • Bottom Bracket Mainten...
Subscribe to our channel: / @worldwidecyclery
Website: www.worldwidecyclery.com/
Instagram: / worldwidecyclery
Jeff's Personal Instagram: / jeffcayley
Facebook: / worldwidecyclery
KETL Mtn. Instagram: / ketlmtn
Jeff's Gear (Shorts, Jersey, Socks): ketlmtn.com/ (PS. We own this brand now )
What's the Worldwide Cyclery KZbin Channel all about? Demystifying the confusing world of Mountain Bikes one video at a time. We eat, sleep and breathe bicycles and love to make videos about them.
Worldwide Cyclery is one unusual mountain bike shop on a mission to build the best bike shop on the planet. We are a group of passionate and motivated MTB riders who are all about having fun on bikes by any means necessary. We mostly live in the world of high-end mountain bikes but pretty much just love anything with two wheels.
Our content provides riders with the most amount of information possible on everything from new product releases to bike and product reviews. We're here to provide relevant content that will inform and educate our fellow riders/bike enthusiasts so that they can upgrade and shred their mountain bikes with a smile.
To learn more about our shop check out - www.worldwidecyclery.com/page...
Shop online at www.worldwidecyclery.com/ or...
Visit a shop in Newbury Park CA, Lancaster PA, or Reno, NV. Come ride bikes! Or drink a beer or fruit juice...
#sram #axs #installation

[@WorldwideCyclery]

What is your perfect drivetrain setup? 00:00 Intro 00:29 Parts and Tools 00:56 Install Cassette 2:00 Install Crankset 4:34 Install Rear Derailleur 5:14 Install Controller 6:10 Install Rear Derailleur Battery 6:31Pairing Derailleur and Controller 8:22 Linking to the AXS App & the different modes 9:54 Install Chain 12:34 Derailleur B Tension Tool 14:59 Derailleur Limit Adjustments 17:42 Micro Adjustments

[@JustAGlitchFL]

This, but with the rainbow chain and cassette. Then toss on a Reverb AXS and XTR 4-piston or G2 Ultimate brakes. Put that all on a S-Works Stumpjumper frame with custom paint, Fox Factory suspension, and some fancy Roval wheels. Something that I thought would look sweet is if you take the upper of a Reverb AXS to a anodization shop that does Kashima, and get the uppers Kashima anodized to match the suspension.

[@INMOTION24]

XX1 AXS(rainbow full set) on my XC bike and XTR full set on my Enduro and trail bike

[@LoweredLife14]

i have the same but in X01 uninstalled. I'm still trying to figure if I have to replace my chainring. what was the crank and chainring used in this video?

[@Ropetable]

Shimano 12 Speed deore cassette for looks and hyperglide +, then a sram axs shifter for crisp 12 speed action, ofc with shimano chain. Mismatch made in Heaven. I currently have the probably sexiest E-Bike on the market and installed AXS on it today.

[@masonknaffla4125]

A free one

[@henryblasi6149]

Me watching this even though I'll never be able to afford this

[@ddialogue]

Me watching this because my AXS kit is waiting for my Transition Spur to arrive

[@henryblasi6149]

@@ddialogue ok ok nice flex I see you

[@ddialogue]

@@henryblasi6149 All good Henri! I'm just super-excited to have this setup. My buddies say it's the real deal.

[@henryblasi6149]

@@ddialogue yeah for like $2k it had better be

[@WorldwideCyclery]

Henry, one day. You will be able to afford this. I believe in you.

[@B19D91]

FUN VIDEO IDEA. Maybe. 2 AXS drivetrains/ 2 bikes. Sync the shifter on bike 1 to bike 2's rear derailleur and vice versa. Ride bikes and shift for your riding buddy and try to get it to work. Lol

[@WorldwideCyclery]

Haha love it!

[@B19D91]

@@WorldwideCyclery DOOOO ITTTTTT

[@thejollywrencher]

Do please do this. It would be quality entertainment.

[@b-horu7452]

@@WorldwideCyclery Omg please yes, do this

[@alex.huyhuy]

I appreciate that you shot this with a chesty it really makes me feel like I’m in the shoes of someone who can afford this drivetrain

[@brianwilson1145]

😂

[@givreycham]

Just watched this again after fitting my AXS.....really good explanation especially the fine tuning. Thanks for posting it.

[@hevdread]

i love the dirty stunt double used in the close ups of the B-tensioner shots. Distant shots, beautiful gold chain and virgin cassette. Close up, black chain and trail grime!

[@DcCock]

Thanks for this video. I tried following SRAM's own video and I ended up with my chain too long every time. This guide did the trick

[@RichSera2-qm5rl]

The best video and very straightforward on sizing the chain without deflating the rear shock. Great job!

[@jameswalters7072]

Installed this guy last night, I love it! For nearly 3 decades have I been tormented by shit cable shifting! Not any more!! Time to shred my local trails in North Wales 🏴󠁧󠁢󠁷󠁬󠁳󠁿 tanks guys 🙏

[@MikeFede]

This video is just in time.👍🏼

[@UNLKYHNTR]

I got mine a few days ago. Shifts absolutely amazing and the little noise from the servo makes me giggle every time. It's a great shifter. Well worth the 620€ (for the upgrade kit)

[@JamesSmith123456789]

620€ Really?🤣

[@mtbmadman011]

Thx Liam, superb as usual. Turbo Levo and I are ready to take the AXS plunge upgrade.

[@flyingdaggers46]

This was great helping me set my bike up, thanks.

[@itsdouetthierry]

Like your videos. This is all straight forward when you have the correct HUB on your wheel, when you have the correct BB, when you have the correct post vs flat mount brake calipers, and you know what you are doing. I myself, am in the progress of overhauling my original Giant TCX ADVANCED PRO 1. I was mounted Shimano 11spd cassette, SRAM S series hydraulic brake calipers, shifters, all mechanic. Going to XX1 10-52, XX1 AXS derailer, keeping my original BB and Crank from ROTOR, swapping to a single narrow/wide 40 teeth front ring and going with Sram FORCE shifters which come with flat mount calipers that I will have to take off, to use my original s-series sram calipers as they are post mount. FORCE don't make post mount calipers any longer..... Its very complex and confusing to know when you need a BB spacer, when you need to use an XDR or and XD hub. Is your existing wheel even compatible with an XD hub or XDR hub etc... The calipers, can they be re-used with a different shifting group.... lots of unknown for office workers like me. Keep the videos coming, I have learned a LOT! Thank you.

[@jasonschmidt777]

Bro great video Really appreciate y’all creating these Big help

[@175thStreet]

Excellent video!

[@tombolo22]

Great pro tip on using the T8 to engage the preload bolt. Thanks

[@bzg6399]

I will never afford to have this bike, but it’s enjoyable to watch. Nice video, thanks man.

[@checho13a]

This is much better! Thanks

[@reza2wheels443]

Thanks for sharing this grea knowledge.

[@lozetchells9164]

Very helpful, thank you

[@mrskeltal3281]

Thanks for the vid. Just ordered the x01 upgrade kit from mechanical GX. Also that 240 hub is quiet. I thought they always made a lovely noise usually!

[@adamenglander]

I needed this

[@dereksmith5551]

Great super detailed video my friend screw paying the bike shop $100 to do what I can do myself in 15 minutes LOL

[@eddy1406]

Unreal, perfectnisiumexcelentiusum!

[@franferri]

I have learned to align my axs with this great video. Thanks!

[@Chuckolicious]

Here's a trick, unless there's some reason I don't know not to do this. Instead of adjusting B with the rider there, simply let air out of the shock and use a cinch or ratchet strap from seat post around rear rim to hold it at 20-30% sag, whichever you think the rider will want. Coil is a bit more difficult but usually you can lean over seat, with seat in chest, pull up on stay to proper sag, and pull cinch strap tight to hold in place long enough to adjust the B.

[@RichSera2-qm5rl]

Very conventional method. I like this video on sizing the chain because he did it very straightforward.

[@pmowe]

Don’t grease your hangar bolt, unless you want your expensive AXS to undo and end up in your wheel, use blue Loctite.

[@PuffinPass]

It comes with pipe tape already applied so you shouldn't need to do anything except tighten it and move on.

[@Ropetable]

Of course this comes out 1 hour after i install my SRAM AXS setup.

[@ddialogue]

Was it as easy to install as the video shows?

[@Ropetable]

@@ddialogue Yes, very easy.

[@kylaling10]

are you using the 10-52t cassette? did you use the Blue B gap tool?

[@ddialogue]

@@kylaling10 Yes, I'm using the X01 10-52 upgrade kit but the shop ended up installing it for me when my new bike came in. They didn't give me the B gap tool (doh!) but I already own the updated B gap tool (white) which clicks on to the 2nd largest ring on the rear cassette. Now I'm wondering if that's the correct tool for the job. 🤔

[@kylaling10]

@@ddialogue just wanna know if i’m correct so the blue is meant for the 10-50t and the new white tool is for both 10-50 and 10-52.? My upgrade kit came with the blue one and i’m using 10-52t cassette.

[@A.D.D.O.C.D.T]

That a bulk toolkit 👌

[@WorldwideCyclery]

Full details on it here - kzbin.info/www/bejne/Y2aydnxnpKqojNk

[@jared_erickson]

That bike is freaking dialedddd

[@gregcoffey6142]

Great video! I’m finding it hard to get my axs shifting perfectly when I’m on the bike, but I haven’t adjusted under sag, so that’s probably it. However while fiddling with the adjustments I’ve done a lot of micro adjustments on the controller. Is there a way of resetting to factory settings? I reckon I’d like to get the new b tension tool and start again from scratch! Cheers.

[@seekerscult]

great vid man. just installed this on my new whip (yt jeffsey pro race) and im gettin chain/jockey friction wen sprinting or goin up steeps! any ideas to solve this?

[@UltimateMTB]

Ah yes, a video for a tutorial on something ill never own 😔

[@pauldoyle2554]

Great video, I just bought the upgrade kit. Will I need to alter my chain length if I am doing a straight switch over of the derailleur from X01 to X01 AXS? Thanks.

[@Sjzinn]

I would love to know how to set the B tension on a 10x51 Shimano SLX.

[@Matayac]

Good video thanks. I get some rub from the chain rubbing on the 52 cog when in the second biggest cog despite following all these steps. Any ideas?

[@pvpanrijder]

Question, can i do aswell the dropper as the drivetrain om the same remote as the drivetrain. So both on the right remote, so i can put my remote left off the bike, so i can put my twinlock better to my left fingers to reach!!

[@zamzampar3535]

after watching this video, do you use wolf tooth MM-ISEV to mounting the sram controller? please let me know. thank you

[@jaygolden4218]

So I have an AXS shifter and derailleur I put on my bike with 10-52 NX cassette. 1x 32T drive and NX chain NX cranks Worked FLAWLESSLY! No issues what so ever! Then I got new wheels. I9 hydra hubs with XO1 10-50 cassette changed out the cranks to XO1 and chain xx1. I measured the NX chain that was with my 10-52 to be the exact length of the new XO1 10-50 cassette... Adjusted the b gap perfectly It shifts PERFECTLY SMOOOOOTH with no load on. But as soon as I put some load on the shifting is hard like there’s a crunch where as before it was smooth. Very hard shifting sounds... The chain doesn’t jump or anything it shifts great with no load when I ride around the block. Any tips or tricks???

[@ap1reviewsadventures96]

Agree with everything but the grease on the new derailleur into hanger thread! Had the wife get on her hands and knees to adjust it under sag.

[@dubblearr7622]

What’s your opinion on that bike repair stand? Pros and cons .

[@mradam4430]

That was quick. Is there a shifter that has three buttons, one that could be used for a dropper?

[@bikedawg]

What does "under sag" mean? Also, that tool that you clip onto the large cog for the b-screw adjustment---what is it called? And can I use it to adjust for a cassette that I just put on-- 9/48 -- 48 is my largest cog?

[@user-zq2ut5fh9z]

What if the derailleur just blinks red and green when you try to shift after pairing? I uploaded the most recent firmware, battery fully charged. Any ideas???

[@jaygolden4218]

What is the exact cassette tool that you need to tighten the cassette to the wheel? There are a few FR-5.2 park tools to get

[@sterpumihai]

We installed a GX Eagle AXS last week but we couldn't make it perfect even when configuring it under sag. First of all, it seems to me these micro adjustments are not really that micro. 8 clicks and the chain is already switching to the next cog. I mean, with my Deore Shifter I get a lot more fine cable tension turns and I can adjust it so it doesn't make any noise in any part of the 11 speed cassete. However, I do run a 2x11 setup so the chain line is perfect.

[@marcusmaher-triskellionfil5158]

Liam, bought a second hand Scott Spark RC two weeks ago with Sram Axs eagle. The front shifting is not working (changed the lcd battery..nada) looked at the AZS app and there's a shadow/black where the front shifting should be with an exclamation mark. Reached out to Sram and it's not got back to me, any advice here could it be something more fundamental like, sadly (replacing the shifting mech)

[@mikep277]

Would I be able to use a 46T front chainring & 10-42 sram rear cassette with the AXS system , Thanks for your help 🤘🏼🤘🏼🤘🏼🤘🏼🤘🏼🤘🏼

[@redneckscience9040]

Will the b tension tool work if I have a 45 tooth cassette?

[@specialagentzeus]

Nice presentation, does the (SRAM B-Tension Tool) work with the e13 9-50 sprocket?

[@keisersoze42]

What is the chain and the number of links in this chain? I tried the Sram GX 126 links chain and it's very tight.

[@danielpowersdo6289]

1) Love the cameos!! 2) if you’re by yourself, how can you fine tune the B-tension [under sag]? Is it usually a slight additional turn clockwise or counter-clockwise?

[@jaycarneygiants]

Is SRAM ever going to come up with a way to power the axs derailleur from an Ebike battery?

[@mgc5942]

Does it support fatbike?N what all things I need to change for this drivetrain?

[@Schwabz33]

Hey guys little confused about this setup. Per SRAM, you’re supposed to set the chain up in full sag or remove the rear shock and you’re supposed to measure the length of the chain using the largest cog. It’s any particular reason why this is being done differently.??

[@chrismitchell4665]

Fellas, my axs is way off at the starting position. Like way too far outboard. This is on a brand new frame and new hanger, it's not bent. It will only shift up, essentially 10 gears because it's starting position is so far out. How can I tell the derailer to start further in board? This is driving me crazy. If I have it shifted to the smallest gear it will shift the chain right off into the chain stay. If I adjust the limit screw so that the pulley is under the 10 tooth, the derailer won't shift until I press the shift twice and then it will only move 10 gears. I tried micro adjusting the 1st gear position, but it tops out before I can get it in the correct position. Please help.

[@edgarsnezinu1439]

Oh wow good video... I thought that derailer adjusts by self ...

[@billynrthwoods]

Do you use the b tension tool on a hard tail too?

[@michaelnrbygaard3227]

hmm for me its like at the low gear i can hear its (fighting itself) what to do

[@alejandrodeleon9330]

What tool kit are you guys using in the video?

[@skfunk4550]

My perfect drivetrain setup is one that Mr Head Mechanic LIAM will mount on my bike 🤐

[@obypocasangre7903]

mine is honestly xx1

[@billk4019]

I want that tool box!

[@WorldwideCyclery]

Check it - kzbin.info/www/bejne/Y2aydnxnpKqojNk

[@jessehill3780]

So I’m curious what happens if you guys try to set the chain length the way sram says? I’ve always used the bottomed out on big ring and use appropriate overlap and it’s always been successful for me. Now with the 10-52 if I do this I end up with a drooping chain on the highest gear. Have you guys ran into this? Maybe sram needs a revision

[@calvinspaeh3353]

It should only droop when the bike is unloaded. If your at SAG it'll be right.

[@jessehill3780]

@@calvinspaeh3353 correct but it only does it with the 52t not the 50t and then when the rear wheel leaves the ground the chain droops and changes gears in the rear over rough stuff. So I end up running the chain length as if using a 50t so it’s a touch short but the alternator is tons of chain slap from the droop accompanied by the weaker clutch on AXS and then sometimes gear changes. So hopefully they’ve addressed that

[@BDuck-lp2pg]

It was a little confusing how to determine the amount of chain length needed.... and the final shifting adjustment.

[@johncast9565]

I pretty much have 2 gears side by side that usually give me trouble. I make adjustments and usually the 2 problematic gears move together somewhere else on the cog. 🤷‍♂️ Sometimes I press the thumb paddle softly (without changing gear) and that minor tension kinda sets it in gear. Its a fine shifting art but annoying A.F.

[@daphoosa]

Your derailer hanger needs to be straightened.

[@marcopintosouza]

Hi. Does anyone knows If The derailleur and shifter is compatible with NX 11-50 HG sistem? I'm thinking in upgrade, but, without change my freehub for XD.

[@beafmilk]

It is compatible!

[@givreycham]

Have you ordered a new tin of grease ? It looked a bit empty.:)

[@gmanmtb]

Those silent hubs are scary!!

[@diogomontreux3837]

Work on cassete 12V cassete 11/50?

[@mtbmadman011]

Oh and funny Ive been using the same chain breaker for like over 20 years…

[@saodiksahul3329]

Axs support lower number cassete ?

[@Domabbott]

Hmm. I'll just drop my bike off at one of your shops. :)

[@Pr1nc3ssf10na]

does the bike have a weight limit ?

[@TwoDogsFighting]

Use wera 2mm bits. They won't cam out.

[@kyllepanisa8256]

IIs The XX1 And The AXS The Same? 🤔

[@leejohnson8719]

If I've already got mechanical GX -52 on my bike, and I upgrade to AXS, I won't need to get a new chain, will I?

[@Intentsrig]

nah you'll be fine. I'd replace if you had a lot of miles on it.

[@leejohnson8719]

Cool- thank you!!

[@Nick-tx2fl]

Cannot get into granny gear no matter what I do with the adjustment screws

[@nwpilot81]

Anyone running this on a gravel bike with a 42t chainring?

[@jay404]

4:44 Warning!!! Please NOLube on the RD bolt.. that white substance is screw lock. Called ''Microencapsulated Adhesive''

[@taunir713]

„I like grease“ - puts the cassette on dry 😅

[@liamwoods5353]

new cassettes have anti-seize from the factory :)

[@taunir713]

That is correct but a little more grease wont hurt.

[@liamwoods5353]

@@taunir713 as long as it’s the same anti-seize. I wouldn’t mix bearing grease with anti-seize tho..

[@taunir713]

@@liamwoods5353 Ah thx, would the Shimano antiseize be the right One?

[@jakomeister8159]

@@taunir713 probably not

[@Pienimusta]

How much you notice the shifting sound when riding?

[@checho13a]

Going down always, going up never!

[@wheatthinbecker]

Doesn't Sram explicitly say to not ever use grease on their derailleurs? I think it already has something on it

[@paul--b]

Yeah that’s right, you are not supposed to grease the derailleur bolt

[@MaximumEffortGuy]

When are we gonna start talking about that tool kit/box ?

[@bridger1579]

Already did it's an entire video

[@WorldwideCyclery]

Here it is - kzbin.info/www/bejne/Y2aydnxnpKqojNk

[@MaximumEffortGuy]

Thanks!

[@rafakowalski5371]

The official sram manual clearly shows that the shifting bolts should not be lubricated. The bolt is covered with loctite. This already shows the contradiction - loctite - grease. It's strange that no one pays attention to it.

[@rahlpfernandez3958]

How about the chain rub on the cassette from 8th to 11th ring gear? The clearance is too tight if there is any for the chain..

[@Schevron]

What’s your opinion on SRAM saying: no Grease on the main Screw of the Derailleur? (SRAM install video on YT) I heard people complaining about the Derailleur loosening.

[@liamwoods5353]

Alloy on Alloy sometimes will bond over time, if performing regular bolt checks ive never had any issues :)

[@BDuck-lp2pg]

I'm not sure why they said to use grease when assembling the screw on the derailer. Some metal will react chemically when assembled (aluminum to steel) and you want to use anti seize which helps prevent this. Steel to steel (bolt/screw to threaded hole) I would recommend using a thread lock compound. Several types are made (low, medium, penetrating) which one is used depends on what you are assembling. It should go without saying that anything that is used with allot of vibration and impacts the fasteners should be checked often. It's the nature of the beast that MTB require allot of maintenance. Simply riding it and checking bolts and fasteners once in awhile your bound to have problems.

[@ananthkutuva3748]

This video seems oddly familiar...

[@kristianvrum8979]

No grease on SRAM derailleur threads!!

[@drsus0]

“Theres a torque recommendation but.... fuck that.”

[@kylaling10]

is the Blue B tension tool used for 10-50t? because i have the 10-52t cassette. just want to know. thanks. great video by the way.

[@natgeoba7377]

There first was a red tool for OG 10-50 eagle. Then the purple/blue version came out for AXS and it should do 10-50 and 10-52. The white version is completely different and works with -50 and -52

[@zwingler]

torque specs ?

[@victorrivera8079]

Hey!!!! What about chain growth!! The distance between the large rear cog and front chain ring or 1x systems that account chain growth that happen when the suspension is compressed.

[@Niloc1922]

Don't think I'll ever move to AXS unless I get an ebike. Then I'm already worried about batteries and electronics.

[@iuriiilin6567]

The bicycle that starts moving in a gear that corresponds to the terrain can be called safe only. This is easy kzbin.info/www/bejne/p6HVenxojpKXfaM

[@mikeynon]

i want to link the rocker shifter to an axs force rear derailleur. I cant find anywhere that says this is possible or not. HALP

[@liamwoods5353]

It should work the same. Axs can pair with Axs. They call it the eco-system :)

[@ValentineGoloubev]

how many shifts on one battery?

[@BDuck-lp2pg]

Depends on how often your shifting. Refer to manufacturers specs.... Googled it 20 hours.

[@yaronmal]

Good explanation but it's make It's a headache to see the video in this form of photography. You need a camera in a fixed place and not a camera that moves

[@victorrivera8079]

SPECIALIZED STUMPUMPER EVO Troy Lee Designs 29 Frameset - Limited-Edition Frame Build FRAMSET BUILD #01 Specialized - Stumpjumper Troy Lee Designs 29 Frameset - Limited-Edition FACT 11m full carbon frame, asymmetrical design, 29 style-specific EVO Trail Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 140mm of travel WHEEL SET #02 Chris King - Disc Hub Rear ISO XD 28 Hole BOOST 148mm x 12mm Thru Axle, Color - Red #03 Chris King - ISO AB Disc Hub Front 28 Hole BOOST 110mmx15mm, Color - Red #04 Pillar Racing Spoke - WING 21 - Stainless Steel Spoke/Ceramic Nanometer Ti Plating, Color - Ti Black, 46pcs #05 Sapim - Polyax Secure Lock Nipples, Color - Red, 46pcs needed #06 We Are One Carbon Union 28H Rim 29", 2pcs #07 PEATY’S - X CHRIS KING (MK2) TUBELESS VALVES Color -Red (PAIR) #08 (Front Tire) MICHELIN WILD ENDURO FRONT GUM-X Size 29X2.40 #09 (Rear Tire) MICHELIN WILD ENDURO REAR Size 29X2.40 DRIVE CHAIN #10 SRAM - XX1 Eagle AXS Controller, EC-AXS-SRAM-A1 #11 SRAM - XX1 Eagle AXS Derailleur, RD-XX-1E-A1 #12 SRAM - XX1 Eagle Chain, 12sp, Gold, CN-EAGL-XX1-A1 #13 SRAM - XX1 Eagle Cassette, Gold, CS-XG-1299-A1 #14 AbsoluteBLACK - OVAL BOOST DM CINCH PREMIUM CHAINRING, TOOTH COUNT - 32T, COLOR - Black #15 MRP - Chain Guide Mini G3 32-36T BB Mount #16 Chris King - BSA ThreadFit 30mm Bottom Bracket, Color - Red #17 RaceFace - Next R Crankset, Arm Length 170mm, Color - Stealth #18 Hope - F20 Flat Pedal, Color - Red SUSPENSION #19 FOX - Factory Series 36 FLOAT 29 160 GRIP2 HSC/LSC HSR/LSR 110mm Axle 1.5 T Kashima Gloss Black, Standard Chassis 44mm rake #20 FOX - DHX2 Performance Elite, Rx Trail Tune, 2-position lever, 210x50mm, S3-550lb spring COCKPIT #21 FOX - FACTORY TRANSFER SEAT POST, Diameter Size 31.6, Metric Size 150mm #22 Cane Creek - SEATPOST SHIM 31.6 to 34.9MM #23 Wolf Tooth - Seatpost Clamp, CLAMP DIAMETER 38.6, Color - Red #24 Wolf Tooth - ReMote Limited Edition Red #25 Wolf Tooth - REMOTE FOR SRAM MATCHMAKER X #26 Specilized - POWER PRO ELASTON SADDLE - Black 143mm #27 Chris King - Dropset 2 Tapered Headset 42/52mm, for Tapered 1-1/8" steerer, Color - Red #28 RaceFace - Turbine R 35 Stem, Stem Length - 32mm, Color - Black #29 RaceFace - Next R 35 Handlebar, Bar Width - 800mm, Bar Rise - 20mm, Color - Black #30 ODI, Troy Lee Design, LOCK-ON MOUNTAIN BIKE Grips, 130mm, Black/Gray, Set #31 ODI, Troy Lee Design, LOCK-ON MOUNTAIN BIKE Grips, 130mm, White/Red, Set Make Black/Red, Set out the two Grips BRAKES #32 SRAM - Code RSC SRAM, MTB Hydraulic Disc Brake, Front, Post mount, Rainbow Hardware #33 SRAM - Code RSC SRAM, MTB Hydraulic Disc Brake, Rear, Post mount, Rainbow Hardware #34 TRP - TRP-33 TWO-PIECE STANDARD THICKNESS ROTOR, Size 203mm, 2pcs #34 SRAM - Titanium Rotor Bolts, Rainbow, 12pcs