On Amazon: *CARB CLEANER: amzn.to/39sZiEE *JET NOZZLE WIRE SET: amzn.to/2CBjEQs
@angelgarcias73283 жыл бұрын
Good jod bro got my like 16 year no stared it it also skool mini bike packe X1 ninja 49cc thing need to do my take aut the tank no got any gas the bike don't now got oil to lol check Amazon for caburater clening got like 5 Difrend what mark can used let me know please thank so much
@RichTexas825132 жыл бұрын
I really appreciate this video, I haven't worked on 2 strokes before and wanted to be careful before I ruined my free motor, the comment on starting fluid and the premix ratio is very helpful to me, thank you!
@hamzahsyed74853 жыл бұрын
I used to do stuff like this at my dads shop when I was 10. Dumpster or for like $50 on classifieds. learn and fix them, then sell them. These are a great learning experience. I learned how to negotiate with these things😂😂😂
@alexandrawhitlock36902 жыл бұрын
I watched a video for 15 minutes and yours is WAYYYY better thank you for keeping it short but good shit
@PETERNESS2 жыл бұрын
By far the best auto fella on youtube
@Boss1234killer4 жыл бұрын
MAN YOU HAVE SAVED ME SO MUCH DAM TIME OMG I’ve been trying to figure these out for three days and this video explains everything perfect !!
@NoNonsenseKnowHow4 жыл бұрын
Always great to hear if a video helps somebody out. Appreciate you dropping a comment!
@RandyFields-v1q10 ай бұрын
Good job man someone that made a easy simple watch this this is what I did type of video
@RobbiRocks11 ай бұрын
Wow, im new to this pocket bike world... That spray you did to the side of engine, what did that spray onto? You did it real quick and it worked great
@cksdobber7 ай бұрын
Starter Fluid
@asdasd46224 жыл бұрын
Hello we just changed the engine as 1st engine didnt go long and seized up. New engine in does start but then cuts off. Please can you tell us if this is anything to do with idler screw setting or the throttle adjuster as when we fit the engine we tightened throttle fixing fully and been messing about with idler screw.
@NoNonsenseKnowHow4 жыл бұрын
Yeah could be a carburetion issue. Honestly it's hard to give you any advice without seeing it.
@asdasd46224 жыл бұрын
@@NoNonsenseKnowHow thanks for reply pal. We did finally sort it it was a carburettor problem
@NoNonsenseKnowHow4 жыл бұрын
No problem at all man. Glad to hear you got it figured out. If you feel like doing this solid, click on my latest video and let it play through. Helps out with the algorithm big time. Thanks a lot man
@Peachybundah10 ай бұрын
I got a mini moto and got a new engine for it its a blue race tuned one (as far as i know) sounds good when pulling it just wont start atall doesnt seem to be any responce when i pull throttle either also taking the thing off the bottom of carb will i have to drain the petrol from it?
@coltacp84515 жыл бұрын
lol i use one of those torch cleaners to clear jets out....I read online the rough section on the torch cleaner can open the jet changing your mixture ....LOL ok don't grind on it all-day. that little thing cruised right along with you on it.....i can't believe you found that in the garbage wth
@NoNonsenseKnowHow5 жыл бұрын
Haha yeah it was definitely a good trash find! And yes I've also had people tell me that about using the torch cleaner on jets in the past. As long as you don't get crazy with it like you said, it's fine. But I could see some rookie getting in there and filing away at it
@coltacp84515 жыл бұрын
@@NoNonsenseKnowHow hahaha like this clown i know using a beam style torque wrench and when he reaches the torque the beam drops and he keeps crankin till he ripping the threads out of the cylinder head bolts
@NoNonsenseKnowHow5 жыл бұрын
@@coltacp8451 yeah that'll do it!
@bass_ic613 Жыл бұрын
so, i work at autozone and a customer came in and asked all of us if we wanted a little crotch rocket and so i was like bet, little fixer upper but turns out it needs a lot of things which is fine but i dont know which kind so ive kinda been guessing. the bike doesnt have any vin or brand or anything like that one and the bolts are all stripped i dont kno what size gas tank it takes too
@iTsYaNgT Жыл бұрын
what starting fluid did you use
@jerrytraphouse4 жыл бұрын
Will this work for 4 stroke Pocket bikes?
@NoNonsenseKnowHow4 жыл бұрын
Similar yes but not the same
@dyllenger4 жыл бұрын
hey man how do these things create spark ? my uncle tossed me one in a tote in pieces an it has good compression has spark but seems to be weak i never cleaned the carb yet im going to now but what would i have to clean up or do for better spark if the carb cleaning dont help
@NoNonsenseKnowHow4 жыл бұрын
They have an ignition coil located near the flywheel and when the magnets on the flywheel pass the ignition coil it creates a spark. At least that's how most of them are
@dyllenger4 жыл бұрын
@@NoNonsenseKnowHow yep i figured that out didnt no if there was more to it i got it adjusted right now , the back of the carb where u can see the choke move just an air filter or am i missing a piece, thanks for the quick reply also !
@DiveboyUK4 жыл бұрын
Should the kill switch button be up or pressed down to start?
@NoNonsenseKnowHow4 жыл бұрын
I don't remember, but usually up
@exclusive-songs70533 жыл бұрын
Up 😂😂😂
@mertcapkin72635 жыл бұрын
where do you spray the starter fluid in?
@NoNonsenseKnowHow5 жыл бұрын
Sorry, I suppose I should have specified that. Into the air box /carburetor throat if it doesn't have an airbox on it
@mertcapkin72635 жыл бұрын
@@NoNonsenseKnowHow ah okay, so in the air intake
@NoNonsenseKnowHow5 жыл бұрын
@@mertcapkin7263 yes correct. Basically where the engine sucks Air in. Although you have to be careful to not do it more than once or twice, because most starter fluids do not have a upper cylinder lubricant built into them like your pre-mixed two stroke gas will
@baintoabdi52804 жыл бұрын
Lol
@ezra87614 жыл бұрын
Mines is the same one but it drives and then it would die. But start right up and die again. Possibly where too start Searching.?
@NoNonsenseKnowHow4 жыл бұрын
Could be a restriction in the fuel tank Outlet or the fuel hose. Or the carburetor Inlet. Have you taken the carburetor off and inspected and cleaned? Also check for if it has a fuel filter.
@ezra87614 жыл бұрын
The carb is clean no black build ups. It just started happening. I was able too see threw the inlet.
@ezra87614 жыл бұрын
It also does have a fuel filter its a clear one. Soo i can see the fuel.
@NoNonsenseKnowHow4 жыл бұрын
Could be that you have to adjust the air fuel ratio screw as well. As the weather changes, you always need to tweak with that on Two Strokes
@ezra87614 жыл бұрын
I will try that. Thanks again man. Im new too these toys but they are fun too mess around.
@eepuz17863 жыл бұрын
Hey, can i clean carb without removing the whole thing from the Bike?
@NoNonsenseKnowHow3 жыл бұрын
Not usually
@eepuz17863 жыл бұрын
@@NoNonsenseKnowHow Oh, i just dont want to remove my wheel since i got it in place
@tunorillbastrd26812 жыл бұрын
What kind of fuel did you use
@mratomic91564 жыл бұрын
Hey which way do put the float.
@NoNonsenseKnowHow4 жыл бұрын
The way it came out.
@tombutler2254 жыл бұрын
Whichever way floats ur boat
@modmoviesondemand61923 жыл бұрын
My pocket bike throwing too much smoke . Is it coz of mixing too much engine oil with the petrol ?
@NoNonsenseKnowHow3 жыл бұрын
Yes
@modmoviesondemand61923 жыл бұрын
@@NoNonsenseKnowHow how to fix this problem ? Can you help me . I mean what should I do now
@NoNonsenseKnowHow3 жыл бұрын
@@modmoviesondemand6192 drain the fuel and add the proper premix fuel
@modmoviesondemand61923 жыл бұрын
@@NoNonsenseKnowHow Ty bro
@7bigK2 ай бұрын
What bike is that?
@pacijentt4367 Жыл бұрын
So i recently cleaned carburetor, air filter, spark plug, fuel filter on my pocket bike and it will only turn on and work if i spray some gasoline in cylinder hole where spark plug goes it will turn on immediately or after riding and its still hot it will turn on, but when its cold and not turn on couple of hours or day later it will not turn on, only spraying gasoline in hole or when its hot after rides, what do i need to do guys
@lecobra4182 ай бұрын
You probably still have issues with your carb, have you checked the petcock? If it dribbles gasoline instead of a steam it is at fault but it could be the jet, or the floater or something else. Anyway it indicates that gas does not arrive properly at the cylinder.
@HMAKRIDAKIS3 жыл бұрын
my pull start is very hard to pull?
@pewdiepiekjellberg42953 ай бұрын
Got mine started and everything but as soon as I take my hand off the throttle it dies. Anyone know why?
@clarencewiles963 Жыл бұрын
Vacation bicycle ride for a backup 😂
@flash_flamingo4467 Жыл бұрын
does anyone know what brand the bike is?
@Potato371843 ай бұрын
Doesn't have a brand. Its a cheap china bike
@mr_mattyboy31334 жыл бұрын
Just got a use one it start but it wont start uo
@NoNonsenseKnowHow4 жыл бұрын
pop the carb bowl off, clean her out and polish the fuel.
@LetMeShowYouIt3 жыл бұрын
looool
@Spencer-e4e6 ай бұрын
Wat h Kind of oil
@Potato371843 ай бұрын
2 stroke oil
@firelum4 жыл бұрын
Oh you mean after the bikes been sitting for five years
@NoNonsenseKnowHow4 жыл бұрын
yea
@5sc0pee103 жыл бұрын
I did not watch this video to get it started, AFTER 2 FUCKING YEARS IT RAN ON FIRST PULL!!!!