How to Start a Skid Steer business | How to Excavate Land🚜

#LandClearing #brushcutter #landclearingwithskidsteer #landclearingequipement #clearingland #clearingproperty #landscaper #entreprenuer #businessowner #skidsteer #kubota #kubotaSVL65 #Clearingtreeswithskidsteer #Globallandscapers #clearingbrush #clearingoutunderbrush #landclearingequipement #landclearingflorida #florida #landclearingvideo #brushclearing #brush #howto #howtomakemoney
Hello everyone in today video I will be showing you how to start a skid steer business and how to make huge profit while doing excavation projects. In the video today I did an backfilling exaction project that took me 10 hours of my time to finish to make a hefty profit for my business. I’m excited to share the Growth of my business and I hope you guys enjoy this type of content.
Don’t forget to like subscribe and to leave a comment.
Repent of your sins and turn your life to Jesus Christ Our Lord and Savior🙏🏾

[@danielskahl]

I love how you give a message for Christ at the end. It’s good to see a young entrepreneur that works hard, lives for Jesus, and proclaims. Keep going and growing!

[@EntreprenuerDavis]

Thank you all Glory always goes to our lord and savior🙏🏾

[@dennisthomas6368]

Also. When using jack hammers ir anything that vibrates, take pictures of home to confirm no cracking or damage. A customer can file a massive claim or law suit if any cracks in house foundation or house walls. Just fyi.

[@EntreprenuerDavis]

Noted thanks for letting me know I actually didn’t know this and I will definitely be mindful of this because I definitely do not want to be sued

[@nismor3490]

Also what I like to use when doing demo by windows with a jack hammer is using those suction cups from harbor friend and hang a welding blanket. Has saved me from changing windows as well!!!

[@EntreprenuerDavis]

@@nismor3490 imma go look into them how much do they cost if you don’t mind?

[@Uncle2kk]

You're on the right track with your business and thank-you so much for spreading the gospel message! One thing I will recommend, when calculating how your project performed you should calculate your equipment plus labor as an expense (example: Total hours 10 x $75/hr (Skid Steer @ $50/hr + Labor @ $25/hr) = $750). Then when you add to all other expenses and subtract from the total amount the project brings in, you have your Gross Profit. I think you will be very successful in your career, so a higher level of tracking project costs should start now. God Bless You!

[@wayneallen9849]

Add airbags to the rear of your truck to assist with the heavy loads it’s very easy to do .

[@EntreprenuerDavis]

Yeah I’ve been looking into them and I will definitely be adding some shortly

[@sopark434]

Or Supersprings or Helper Springs.

[@JoseJimenez-kt1rv]

Your going on the right path brother always put him first amen 🙏

[@EntreprenuerDavis]

All Glory to God🙏🏾

[@JT-qf4it]

I have had a skid steer business in Central Florida for about 10 years. I can tell you to be fair in your quotes and do a good job. Customers will call you back for more work and refer you to their friends. I do not advertise and stay busy. Just word of mouth. You need to work on your grading skills but that will come with time in the seat. Good luck with your business.

[@EntreprenuerDavis]

Thank you for your advice my problem now with my grading work is my bucket isn’t as wide as my tracks so it’s impossible to grade my tracks

[@JT-qf4it]

@@EntreprenuerDavis You need to trade that bucket for a wider one then. Or overlap your tracks.

[@jeremyeaton-precisionearthal]

Be careful and realize that adding bigger bucket also adds weight to what you’re towing on an already struggling truck considering you stated it squats. When you load your equipment try to position where it is as level as possible and also verify all your gvw. If you are stopped and you’re over it potentially can lead to massive fines not to mention a huge safety concern. Also for the trailer try not to have to much weight on the tongue, this is better than to much on the rear of the trailer (this can lead to fishtailing). After fishtailing three swings it’s common for a vehicle to overturn. Keep up the drive!

[@Kleiminc]

I love the main message at the end. Amen

[@EntreprenuerDavis]

Thank you

[@Paintedplaty21]

How to eliminate squat: Get a bigger truck... Lol All seriousness, I'd either bag the truck or get a dually with a tow package. Keep up the great work and continue to share the Gospel!

[@EntreprenuerDavis]

I want to get me a Dually F-450 but that’s cost Dually F-450 money lol and I will continue to Share God Gospel!🙏🏾

[@lamarkhopkins6831]

God bless you for the word I don’t know you personally but me and you believe the Sam way your channel is a great inspiration keep up great work god bless you

[@EntreprenuerDavis]

Thank you God Bless you as well🙏🏾

[@Mr.BodyByFisher]

Appreciate the knowledge you shared.

[@EntreprenuerDavis]

No problem thank you for your comment.

[@happythe2]

I've done a lot of demo in my days, all I'd say (especially with the attachement hammer) is get some thin plywood in front of those windows. It could have been a pricey one 😉

[@EntreprenuerDavis]

I will do in the future I wasn’t aware I don’t run that attachment as much as others

[@joshmarauder]

Love the ending message is solid..god bless you brother

[@EntreprenuerDavis]

God bless you as well man🙏🏾

[@deanfaleski4156]

You were asking about the truck squatting under load. I install airlift 5000 air bags in my trucks and they work great! Get the compressor too. Without it you wind up not using them when you need them because its a pain to get air.

[@EntreprenuerDavis]

Thanks I will definitely be looking into getting some air bags

[@multi-transportationsystem11]

Better start thinking about getting your cdl license bigger truck more weight my Nephew started his business he’s doing very well here in Texas there’s so much a single wheel truck can haul

[@EntreprenuerDavis]

Yup already start looking into it honestly and your definitely right

[@alexmercado3931]

I would put some type of sheet or plywood on the windows for safety precautions. Don’t want to pay $1k window replacement bill.

[@EntreprenuerDavis]

Yeah I will keep this in mind for next time

[@chintuchin]

I have a property maintenance company and I charge 250. per hr for skid work plus any materials I need for the job. I hope you busted up the bottum of the pool for drainage that pool could hold water, also the dirt you put in the pool will settle so the guy might call you down the road to add more dirt.. Airbags for sure on your truck..

[@EntreprenuerDavis]

Yeah I put holes in the bottom of the pool for drainage and the guy is having pavers put in on top of the pool area and his whole back yard and I will look into getting airbags

[@Joewayne-mc4wq]

Thanks for sharing your video I've learned a lot from this video and I'm planning on starting my own business when I'm released from prison keep the content coming and the positives motivation

[@codylee9397]

You seem like a good, down to earth person who is a hard worker. Mush respect brother. Hard to see now a days. I’m wanting to get me a skid steer and do jobs too. Thanks for taking the time for the videos

[@EntreprenuerDavis]

No problem man and I appreciate your comment and support.

[@clemsonsteeler-man9803]

Good video what part of Florida you in?

[@WaynesAdventure]

Looks great and pretty good profit

[@EntreprenuerDavis]

Thank you!

[@petidaweightslinger]

Great stuff 👍🏽👍🏽

[@EntreprenuerDavis]

Thank you!

[@JaimeDRios]

Great job.. well done! God bless you!

[@EntreprenuerDavis]

Thank you

[@lawrencezaccheojr6642]

Great video !!!!

[@EntreprenuerDavis]

Thanks man 🙏🏾

[@sopark434]

Awesome, : )

[@EntreprenuerDavis]

Thank you man!

[@codyspicer]

WHAT A GREAT VIDEO KEEP IT UP❤

[@EntreprenuerDavis]

Thanks man I appreciate your comment

[@hloc8589]

Amen brother

[@EntreprenuerDavis]

🙏🏾

[@AnointedOne4God]

Amen

[@EntreprenuerDavis]

🙏🏾🙏🏾

[@MATTEOSTOWING]

Get yourself a set of super springs. We use them on tow truck from all that weight hanging off the back. More reliable than airbags. Look them up I’m sure you’ll like how they perform.

[@EntreprenuerDavis]

I will definitely be looking into them 🙏🏾

[@randallbarton7975]

Throw some air shocks on the n back of your truck. You can add air when it squats...you can raise it up.

[@MaddMaxx_MaddMaxx]

Love your videos, and love you preaching about Jesus Christ 💪🏼 for that…I smashed the like and subscribe button!

[@EntreprenuerDavis]

Welcome to the family!

[@RonanKeane]

Amen!

[@EntreprenuerDavis]

🙏🏾🙏🏾

[@benedan192]

AMEN

[@EntreprenuerDavis]

🙏🏾🙏🏾

[@benedan192]

@@EntreprenuerDavisit’s nice to see someone open about their faith. I greatly appreciate the message at the end. What you say does not go unnoticed.

[@brandonstuck5448]

Air bags 100% been running two Firestone units for years with no issues. Helper springs are cool until you’re driving unloaded and your truck is overly stiff. Airbags are adjustable on a per load basis so you’re always riding secured and level no matter your load.

[@EntreprenuerDavis]

I’ll probably get the air bags I’ve had a lot of people tell me good things about them

[@cheebiewonder5817]

I don't believe air bags will help with sway. Weight distribution system does.

[@AaronRHP]

Look at Sumo Springs or Timbren for load support. They replace the factory bump stops and work great.

[@EntreprenuerDavis]

I will look into them because I definitely need something

[@TRUSTLEO]

My man. Good work. I think you could have charged $3k plus materials but all in all, you’re winning bro 🙏

[@EntreprenuerDavis]

Yeah I will keep this in mind for a future job but this customer in particular didn’t have a huge budget so I had to work with him a little bit

[@TRUSTLEO]

@@EntreprenuerDavis I get that a lot also. I find myself in a position where you don’t want to lose the job because it’s not too hard and you’re going to make good money still. Keep it up bud, at your age and level of hustle, when you get to my age you’ll be a beast. Congrats on your success.

[@gregggwidt110]

roadmaster active suspension is great for a no maintence and cheap squat assist

[@EntreprenuerDavis]

I will look into this thanks

[@AmericanbuiltConstruction]

add your machine/ truck /trailer wear and tear. idk 100 bucks a job or so for.. maintenance and so on. good video

[@EntreprenuerDavis]

I already add that in there every time

[@taylorhansen2619]

Great video! Love seeing a young entrepreneur. Would you have some time to hop on a phone call to speak some about the dirt work industry?

[@EntreprenuerDavis]

Yeah I would email me at [e-mail]

[@joshwhitlow9780]

I've never done skid steer work or excavation but if you only worked like 10 total hours that's like 200 an hour so after expenses I think you made out pretty good you made great profit and the customer liked the price

[@EntreprenuerDavis]

Thank you 🙏🏾

[@ariesmiller5058]

airbags or replace your factory bump stops, they’re about the same in the price but bump stops are less maintenance. look up Timbren and you’ll see them

[@EntreprenuerDavis]

I’ll look into the bump stops

[@shawnramer2613]

I used to install air bag kits all the time on trucks like that . Would help with squatting

[@EntreprenuerDavis]

I definitely need one of those systems

[@themintlord4744]

You can get airbags to put on the back wheels to prevent the squatting. My dad uses them with his truck and 10,000 pound boat and they work great.

[@EntreprenuerDavis]

I’m definitely going to get some airbags

[@Jmbeckwith48]

rear timbers for your truck help alot

[@EntreprenuerDavis]

I’ll look into them because I need something

[@davidfortenberry1563]

Her yourself a helper leaf for the leaf springs on the truck. Doesn't affect the ride but helps the sag. Airbags next but a lot more expensive

[@EntreprenuerDavis]

I need this honestly

[@dustywoodard3570]

SD truck spring upgrade springs to 350hd or 450 springs for a stronger more reliable ride. Or do air bags if you don't haul with it that serious.

[@EntreprenuerDavis]

I haul my skid and excavator so I think I’ll get the springs

[@Dumpsterfire88]

Definitely get an auto air lift system. Thats what I run on my truck. And get some rear drop leg jacks for that ironbull so you don’t keep destroying the back of the trailer when loading heavy equipment. The trailer should already have the pockets for it.

[@EntreprenuerDavis]

Yeah I’ve been looking into the air lift system and also I definitely need those jacks for my trailer because you are right in the back of my trailer it’s getting damaged.

[@everettware3466]

Just try to leave your customers yard looking better than what you did. Make look good as possible. Did you offer to seed and straw? Could have been a few extra $. Word of mouth is a lot when a job is completed. Hope your business really takes off. Good luck young man.

[@EntreprenuerDavis]

I left it like that because he is having pavers installed at his home so he’s having another contract coming into install them and they have to put more material down

[@arileoj2509]

God bless you 🙏

[@Kleiminc]

The airbags are good with the squat issue

[@EntreprenuerDavis]

Already looking into getting them

[@Relax-us9tm]

Great Video. Thank you for putting it together. God Bless you and your viewers! Don't forget to add in monthly and annual expenses to make sure you are actually earning a profit. Things like Insurance and maintenance for your truck and machine. Payments on the machine and truck? You do have commercial liability insurance, right? What about health benefits and retirement planning? There are many expenses involved in running a business, and none of them are for you to bear, they are all part of the job cost that gets rolled into your quotes. Figure out exactly what all of your expenses are, and include every one of them, otherwise you may actually be paying to work for people. I love that you're on this adventure! Consider the local chamber of commerce, or even some of your church members to connect with some business-oriented mentors to help guide you in keeping profitable for the long-term. Will this level of profit keep you and your family eating, sheltered, and cared for for the foreseeable future? I suspect you could have charged more for this job and still gotten it. I've learned to walk away from the cheapskates and the folks that think my rates are too high. It's not worth the hassle. Definitely buy the attachments you need, and use the ones you have well. Keep up the awesome work and stay Blessed!

[@mikediaz6588]

Airlift bags 💯

[@EntreprenuerDavis]

I am looking to getting them

[@mikediaz6588]

@EntreprenuerDavis air lift 7500 XL 100 % worth it !!easy to install to!!

[@EntreprenuerDavis]

@@mikediaz6588 thank you man I will look at them are they most powerful ones you can get?

[@mikediaz6588]

@EntreprenuerDavis ya I believe so ! Those will go on the F250 or F350you can get the on board air you and fill up your tires with it I haul a dump trailer with the machine in it probably around 12k lbs and it sits level and if u need to u just add more air ! Or take some out for a smoother ride

[@toplinek990]

Nice job. What matters is keeping the commandments as He told us. 1 John 3:4-10

[@EntreprenuerDavis]

Exactly that’s is true but you can only know the commandments if you read the Bible and if you read the Bible you would read this as well it’s the key to life 🔑

[@edtaylor6431]

Put some air bags under the rear. I retired from hauling RV’s across the country. Air ride suspension is the way to go!

[@EntreprenuerDavis]

I’ll take a look at air ride for sure

[@Gary-zg7pj]

You might want to consider air shocks in the rear of your truck. They will lift up the rear end to where you want it. Keep up the good work Man of God.

[@EntreprenuerDavis]

I definitely will consider some airbags

[@nickc7320]

​@EntreprenuerDavis I had airbags for moving a 38' camper a few years back with a 2500 ram. It had the engine for it, but suspension needed help. It was a night and day difference. So happy with the upgrade

[@EntreprenuerDavis]

@@nickc7320 I am going to be getting some shortly

[@luisouida1606]

Airbags in the back baby

[@EntreprenuerDavis]

I’m looking into get them now

[@jacobahlfield9491]

I put airbags on my dually to mitigate squat on the rear end

[@EntreprenuerDavis]

I definitely will invest in them soon

[@jesseowens2275]

Sumo springs can help with the swatting.

[@EntreprenuerDavis]

I’ll look into them I haven’t heard of them before though

[@savasruiz2977]

when jackhammering near windows use plywood to cover the windows so if anything flys. it won’t break the windows

[@EntreprenuerDavis]

Noted I will keep this in mind for my next job thanks for the advice

[@derekr13]

You can put in air bags on your truck and a compressor, fill them when you are loaded and it won't squat and will ride smoother

[@EntreprenuerDavis]

I am looking into getting them now

[@derekr13]

@EntreprenuerDavis that's good man, hope it helps. Love the videos, will be getting my own skid steer soon, i will keep watching your videos.

[@azmadnesshustle]

You could try installing towing bags? Or convert the back to a dually probably not cheap but just an idea

[@EntreprenuerDavis]

I’m looking into getting airbags now

[@crooksrps1361]

stronger leaf springs for the rear of your truck or get air bags installed!

[@EntreprenuerDavis]

I will look into getting that done

[@RepairedFordBoys]

Just want to share. Need to destroy the base otherwise that hole section will hold water. Burying the material is fine but you need to destroy the pools completely otherwise it will still hold the water. Additionally compact. The compaction of your skid is next to nothing. About 4 psi. You can do about 1 inch rises for every 1000psi. For a 4k plate compactor can compact about 4in of material! Keep husling and provide great work! You'll make it.

[@EntreprenuerDavis]

I put holes in the bottom of the pool because The customer could not afford to get the entire pool removed thank you for your advice

[@shermanjack7251]

Wassgood “ airbags

[@EntreprenuerDavis]

Thank you I will look into picking them up

[@cooflowjenkins]

I would try and compact the soil in lifts.. I mean I guess it’s not a huge deal on something like this but it’s likely that a few months down the road and the customer will have some significant settling..around the hole you filled in. Which you could just come back and fill it in again if he wanted or at least to let the customer know ahead of time to expect some settlement.

[@EntreprenuerDavis]

He was getting pavers in his entire backyard

[@cooflowjenkins]

@@EntreprenuerDavis well there you go. You got it!

[@sdrammm696969]

Jackhammer are expensive, for your area not bad.

[@EntreprenuerDavis]

Okay I didn’t even know I’ve never looked into it I guess but that’s good to know

[@rayrayslawnlandscape2008]

Those numbers are doable-Take away the $500 for jack hammer rental-the $130 home depot hammer rental and all the time wasted running them down and the time picking up dirt when u had to have 18ton delivered anyway -then had to take time to get rid of the extra dirt-- 1 day job easily if all these are eliminated plus alot more profit.. To me its all about your time and managing it - There are enough things that can go left without us creating time sucking issues- im the worlds worse at that! You do like i do - Prepare by dropping equipment off day before and putting alot of thought onto it - I overthink alot of jobs and it usually works out in my favor as far as time management and if it dont then i LEARN from it.. Great video young man🤑

[@EntreprenuerDavis]

Thank you for your comment and advice would you suggest I buy the jack hammer attachment?

[@rayrayslawnlandscape2008]

@@EntreprenuerDavis Well u would have to weigh how much you need one vs what one cost. When i buy attachments I always buy HD Always buy attachment designed for my machine and bigger - where my machine will run it on the low side but a bigger machine will run it better- With that being said it puts me in a spot that WHEN i upgrade my skid steer then all my attachments are good to go - So i only have to buy each attachment 1 time for life

[@EntreprenuerDavis]

@@rayrayslawnlandscape2008 makes sense and I’ve had my run around with the Chinese attachments I will never again get cheap attachments I will get used but never cheap again and I will weigh the pros and cons

[@rayrayslawnlandscape2008]

@@EntreprenuerDavis right the last bucket i bought in November was $2200 for just a tooth bucket - Man My Svl75-3 can not bend it- warp it - its a beast. I Bought a used power rake from Quick attach $8k. A Hd Brush cutter/mulcher from MTL for $10k - A grapple bucket from MTL $3500-and i use it more than anything! had it for 5 years no issues!

[@EntreprenuerDavis]

@@rayrayslawnlandscape2008 yeah I’ve seen how good of a brand MTL is I’ve been thinking about buying there brush cutter things a beast

[@Calebrondil]

nice work having a hard time finding jobs like these in south florida, any tips?

[@EntreprenuerDavis]

Email me at [e-mail]

[@petidaweightslinger]

Repent and turn your life to jesus christ

[@EntreprenuerDavis]

@@petidaweightslinger exactly brotha!

[@pringle9464]

I enjoy your videos. Did you take the pool away or just bury it? Thanks!

[@EntreprenuerDavis]

I just buried the pool to help save on cost for the customer

[@firstname6208]

Why didn't they hire someone to finish the pool? Total loss for them. Dayum.

[@EntreprenuerDavis]

@@firstname6208 because they tried and every contractor said they would have to take it out and redo it

[@maxwellkeller7062]

Get some air bags for your truck. They'll help while towing

[@EntreprenuerDavis]

I definitely will be looking into them

[@joshgibson1222]

Airbags will get rid of the squat … I love mine

[@EntreprenuerDavis]

I investing in them currently

[@environmentlandscapeexcavation]

Never leave a rake on the ground,;those things can do some damage if you step on them. Over here in PA a full triaxle of topsoil cost about $500 which they bring you like 23 tons. Other than that amazing video brother keep it up 👍🏽👍🏽👍🏽

[@EntreprenuerDavis]

Yeah I know about PA that’s where I’m from everything is super expensive compared to Florida but I’ll keep an eye out for the rake for now on.

[@environmentlandscapeexcavation]

@@EntreprenuerDavis oh that’s crazy! I had no idea, im located in bucks county so everything is super expensive. Yeah, man i saw this guy get a huge bruce on his forearm because when he stepped on it, it came back with so much force. Im also trying to reach your level 👌🏼. Hopefully this year im able to get an mt 100

[@dannybond5205]

You might add some leaf spring /air bags

[@EntreprenuerDavis]

That what I’ve been looking into

[@demondmorris7308]

For squat get airbags or get a F350 or 450 dually or srw

[@EntreprenuerDavis]

I would love to get me an F-350 or even better and F-450 but there price tag is crazy so I’m going to have to settle for the airbags

[@davidpritch718]

There's air bags and there's air shocks. I use the latter. They're much less expensive and easy to put on.

[@EntreprenuerDavis]

Interesting I might look into that I didn’t know about it

[@dudleyglass2845]

Ride rite airbags. No questions asked they are worth every penny.

[@EntreprenuerDavis]

I need them badly

[@marvinwilliams8884]

Try out the airlift xl to take the squat out of your truck

[@EntreprenuerDavis]

I’m looking into it now thank you for your advice

[@curtismoncus4118]

Helper air bags

[@EntreprenuerDavis]

I will look into it

[@danielmiller4620]

did u take all the concrete away or did u bury it? and the one thing i would say is to compact it good or it will settle a lot in the 3 4 months but like the vids man keep them coming

[@EntreprenuerDavis]

I Buried the concrete and I compacted really well and I track it down so it’s compacted really well especially since I drove a 8,000 machine on top of it

[@danielmiller4620]

Ok one more question for ya u from pa I saw there was pa license plates on your truck I live in pa

[@EntreprenuerDavis]

Yeah I am from PA that’s where I grew up at I’m from right outside of Philly

[@johnathangraham7226]

Air bags will help with the squat.

[@EntreprenuerDavis]

Looking into getting them now

[@EronIler]

You are not accounting for daily equipment costs, rental, travel to the dump, and depreciation. For using rough numbers like you do, target $1500 after direct job costs to cover you wages and these other costs. Average out wage per hour to be sure your time is well covered. Remember tire shops charge $125/hr to change tires. You are doing more skilled labor and should average at least this. Keep hustling. You are off to a great start.

[@EntreprenuerDavis]

Thank you for your advice I will definitely do this for now on.

[@kqzix]

Im not sure bro but you could of demoed the whole pool with the machine and im pretty sure 100% that you have to compact an old pool when your filling it up from layers and the grading it needs some more work you could of took out the patches of grass and made it look nice..

[@EntreprenuerDavis]

He putting pavers back there…

[@5TheFlyingFarmer5]

If they are installing pavers it's even more critical you achieve proper compaction. Standard code is 95%. Did you pull out and remove the rubble or bury it and all that rebar?

[@EntreprenuerDavis]

@@5TheFlyingFarmer5 listen man I gave him a deal that’s not my job I’ll leave that to the paver guys they’ll just charge more to do the correct job he told me to do it that way to save money if you were doing the job then you can do extra work for no extra money

[@5TheFlyingFarmer5]

@@EntreprenuerDavis not throwing shade, just trying to help educate and prevent callbacks or litigations and protect your reputation. As far as squat on your truck, airbags are nice but make sure you include an onboard air system because they 100% will leak and constantly filling them up with a tire gauge is annoying. With an onboard air you can add and lower air pressure on the fly as your load changes. The other option is to add helper springs to your leaf spring pack.

[@chrisgarland2272]

Air bags for the rear

[@EntreprenuerDavis]

Yeah I’m going to invest in some of them for sure

[@wadegamache485]

Could you not add the attachment plus a premium to your overall charge? I’m starting my own business so any advice would be appreciated. Thanks for your videos

[@EntreprenuerDavis]

Yes you could have and I would usually do so but the customer only had a certain budget and your a point where you can still make great profit for one day and take a bit of a pay cut or not make anything at all

[@moveithaulingjunkremoval3823]

Load the skid steer further back on the trailer to have less of a squat

[@EntreprenuerDavis]

It’s the farthest back it can be I put the engine between the axles

[@jackwilson9572]

Seeeing you run a hammer on that skid steer scared me a bit because your using it while next to a house and rocks can be shot out really hard and can shatter the glass. I only say this because I’ve been hit by the fragments on it and it fucking hurts. 😂

[@EntreprenuerDavis]

Yeah I’m not really an expert with the hammer I rarely use it but I’ve been told I need to be more careful so I don’t damage something and lose all my profit 😂

[@jdmpressurewashing2481]

Definitely airbags

[@EntreprenuerDavis]

I I’ve been looking into them actually heard good things about them

[@joelrush953]

Get bags for your rear suspension

[@EntreprenuerDavis]

Looking into them now

[@fee_ic4981]

Leaf springs for squats

[@EntreprenuerDavis]

I’ll be looking upgrade mine

[@Tyuop8899]

Air bags will help with squat

[@EntreprenuerDavis]

Looking into them

[@cheebiewonder5817]

your trailering solution is called a Weight Distribution System. Level and safer travel!

[@EntreprenuerDavis]

I’m going to look more into it

[@KevinJ293]

@@EntreprenuerDavis A great weight distribution system is the BW continuum hitch. It is expensive, about $1400, but is easily adjustable via a hydraulic pump and sway control is good

[@bt1959]

Probably should allocate some of the profit for the equipment like truck and skid steer.

[@EntreprenuerDavis]

What you mean?

[@user-tg7yn8qo7w]

Is it safe to backfill without compacting the fill in lifts?

[@damianpascual97]

Hey man how are you finding theses jobs I’m also in Florida and struggling to pick up work

[@EntreprenuerDavis]

Shoot me over and email [e-mail]

[@petidaweightslinger]

Repent and turn your life to jesus christ

[@jeremy_moto_192]

Airbags for your truck would work

[@EntreprenuerDavis]

I have been looking into them

[@ggboys6077]

How do you advertise? Or what companies sub work to you?

[@EntreprenuerDavis]

I made a video on this and I call around to local companies in my area doesn’t matter who it is

[@user-lr7nt2hx8l]

DD help me understand something. You are adding your expenses into the job quote aren’t you??? If not DD you should be even though you my have to estimate. The squat in your rear end is because you didn’t get a heavy duty truck. (FORD) you purchased the absolute wrong brand. You should have purchased a 2500 HD or 3500HD GMC or Chevrolet or a medium duty GMC 4500 5500 or 6500 with front and rear air ride diesel 4x4. -Fuel -Rental tools or equipment -Material dirt gravel etc should be added to the quote even when you first arrive at the Job site to start the project that’s a change as well. Since you asked I would have changed $5,500.00 + all the extras mentioned above. Remember you have ware and tair on your equipment. If you need a partner just let me know. I do have some equipment as well. At some point you will need a place to park/store your equipment and materials stockpiles. Job well done. I like your work ethic. Keep it up and keep the faith and videos coming DD.

[@EntreprenuerDavis]

Where are you located and of course I add my expense into the quote that’s the only way I can come up with a number for my quote otherwise it was be a disaster

[@joshuaturnage5982]

Air bags. Very cheap and can be self installed for squat.

[@EntreprenuerDavis]

Yes I looking into them right now

[@Offthagramz]

I do grade work for a company now do you have any good advice on starting a business doing land clearing and grade work with a skid steer ?

[@EntreprenuerDavis]

Email me and I can tell you all you need to know

[@treylincoln9367]

Put some air bags to stop the squatting on the truck.

[@EntreprenuerDavis]

Looking into it now

[@treylincoln9367]

@@EntreprenuerDavis ok 👌

[@JesseDrapinski-rc7co]

Air bags help with squat

[@EntreprenuerDavis]

I am planning on getting them

[@valleytopfarm3108]

Where do you work I’ve seen palm trees in some videos?

[@EntreprenuerDavis]

I work in central Florida

[@avid2064]

What is the weight capacity of your trailer 14K ? 16K? And whay ply tires do you have on your trailer? 10 ply? 14ply? nect ect

[@EntreprenuerDavis]

12 ply and 14k