HOW TO START AND SYNCHRONIZE GENERATOR ONBOARD THE SHIP- Toping's World

[@hj_eastside]

Very informative and straight to the point. Simple explanation. Includes manual starting of generator and manual synchronization. Plus points for checking other items before starting and for including the change over from DO to FO.

[@topingsworld4381]

Thank you Sir❤

[@enginecbr]

Gustong gusto ko yung content mo sir. Dami kong na tutonan na practical knowledge. Can’t wait sa cadetship ko next year. Godbless, sir!

[@gamalielgonzalgo2107]

Thank you so much sirrr sa Videos mo, more power! Salamat sa pagbigay ng knowledge saakin bilang aspiring 3RD asst Engr. More videos sirrr lalo na sa mga makinarya na hawak ng Third Asst Engr on board!

[@topingsworld4381]

Thanks for watching Sir.❤

[@denvergo4003]

Thankyou for this video atleast magkakaroon kami ng idea how operate generator and how to synchronize.

[@tracylemme1375]

In the old days we would use a lightbulb connected from similar legs. The bulb would glow and dim. When the bulb was out the switch would be pulled, and the generators would be running parallel. The the shore power would be either connected or disconnected. Very simple.

[@enginecbr]

I love this. We had a similar laboratory activity. We would wire the generator to the synchronization panel and synchronize it to a steady 220 VAC supply. We used three sync lamps.

[@prutasceratops]

Thank you po! Very informative content. Magandang refresher video, gawa pa po kayo ng madami at simple videos about engine room.

[@RahulJain-et6dc]

Your explanation is awesome... Every thing is perfect in your every video..👍 Thanks a lot from INDIA 🎉

[@Kenn_zou]

Nice video additional tip maigi na e drain muna ang hangin sa may starting air turbine may valve dyan na maliit kasi sa katagalan yung moisture nyan makakasanhi nang pag stuck up sa mga solenoid nang turbine

[@mrmario974]

super interesting! salamat po for your video kuya!

[@swsuwave]

Your ship is so spotless and clean! Great to know!

[@nicnoc4845]

Salamat po sir.. Sana marami pang matutunan sa mga vids mo

[@JoseMarieLeynes]

Wow, this video is incredibly informative! Your deep knowledge on the subject really shines through. Thank you for breaking everything down so clearly and providing such valuable insights. Keep up the amazing work!

[@kyawkokooo1392]

Thank alot sir... Very easy understand to me.. I am a new oiler from MYANMAR.... RESPECT SIR.....🙏🙏🙏

[@topingsworld4381]

Thank you for watching Sir❤

[@emilianogabriel9613]

Iba na pala ngayon ang sistema ng pag start ng generator

[@meljamandre9079]

Very good and i understand very well classmate i am so very proud of you

[@subash3849]

U have to upload every video is very useful for me..thank u so much sir👍

[@nyinyitun2437]

Thanks so much bro ,from Myanmar.

[@GRANTROYAKPOURIEME]

Your videos are always the best, please do one for oily water separator

[@senju1717]

Sanabaoll Vlogerist nahhh😍😍

[@jemgalls4032]

thank sir may natutunan ako❤

[@cristianramos-y7z]

Very Good video my friend, looking from Spain

[@Leo3481]

Great video to understand how to work. Thanks.

[@MaynardRaySantos]

well explained video. thank you so much po sir.

[@chrishunt1941]

Thanks. Will be useful next time I am engine operator on cargo ship

[@jadenequin3674]

thankyou so much for a wonderful and very useful video sir

[@arudeisonproject6437]

Easy to understand, thank you brother, good bless you..

[@DinoCatovic]

Thank you for great video and explanation! Easy to understand, by far best on youtube. I will show this to students in my class. Greetings from Croatia.

[@topingsworld4381]

Thank you so much for watching Sir❤

[@SaintWang]

Thank you sir! more pa po!

[@Maciejkam]

Great video for beginners.

[@md.wazibhasan]

Marvelous Video. Thank you sir. Go ahead

[@topingsworld4381]

Thank for watching❤❤❤

[@makinistangmandaragattv5560]

Very informative sir..keep sharing.

[@bilalawan9829]

very simple and easy thanks Mr engr

[@topingsworld4381]

Thank you so much for watching Sir❤

[@macawilivillarosa9473]

Galing ng mga video mo sir

[@topingsworld4381]

Salamat po❤

[@jonathanpimentel9672]

Keep up to good work and god bless bro, I love you ❤️

[@christianpimentel3461]

Panalo to... Keep safe Bro. God bless!

[@BlastmotoTv]

Easy to understand 👍👍

[@janmarcdapar6895]

Thankful and grateful of being a trainee. Hope to gain more knowledge and guidance with you sir. Hoolllaaa!

[@topingsworld4381]

Thanks det. Holllaaaa

[@senju1717]

I really Love your content sir keep it up

[@topingsworld4381]

Sana baol.❤

[@KNNi-mt7ix]

Very easy to understand.

[@topingsworld4381]

Glad to hear that. Thank you for watching Sir❤

[@Im_bikeman]

Very well explained

[@BillPalileo]

Ayos sir. Tagalog version din sana sir

[@AnatPlk]

Thank you for great video and explanation! Why is there no video showing the oil pump turning on before starting. I would appreciate your reply, sir.

[@emilianogabriel9613]

Pati panel board iba na rin kungsabagay yung panahon namin manual lahat hindi tulad ngayon pero yung last na barko ko unmanned na way back 1991

[@jieghiechannel5182]

Sana all vloger

[@MrtavLadanSutra]

Good video mate

[@andrewcastronuevo5215]

Nice sir!.very informative gd ang video sir and also very easy to understand. 😁♥️

[@topingsworld4381]

Thanks gd sa paglantaw sir❤ hehe

[@christianpimentel3461]

I'm Excited for about your farming content.. hope you can post it too.❤️

[@topingsworld4381]

Soon❤

[@depressedkid-qz7ct]

salamat idol

[@usmanhaider3257]

Very help full

[@devanandmarar2474]

Nice vedio❤

[@darryllabrador996]

god bless po

[@paingkokotun]

Thank you very much sir for sharing knowledge. Very easy understand to us. I’m from Myanmar🇲🇲.

[@topingsworld4381]

Thank you so much for watching Sir. Stay tuned in my next videos❤❤❤

[@genteroyvlog3513]

thanks sir engr. for info

[@jmcrunexy.8816]

Ay iba si sir

[@christiane.caclini9404]

nice..Thank u sir

[@youngliar6578]

Good

[@Popoy-x4j]

Thanks for the video sir, salute. Sir may i ask? Why do we need to wait for 10 minutes after idle run before we put a load? And is there any parameter to be watched or time to wait before we changover after we put a load? Thanks sir

[@DieselGeneratortraining]

If the governor speed of engine lock with other generator during synchronizing generators what will be the fault 🤔 I need your advise

[@topingsworld4381]

I didnt experience that problem sir. But i will read the manual and ask my superior for that question.

[@angelryan9710]

6:54 may nakalimutan Ka kuya , Yung sinchonize handle ibalik sa off. Bago. Mag sare load

[@topingsworld4381]

Nalagay ko rin sa video po. 😁 thanks for watching❤❤❤

[@karthikjr73]

Well explained, 3rd.

[@topingsworld4381]

Thank you so much Sir❤

[@junaidkadri644]

sir is the lube oil priming pump on always. is the lubrication process on continuously while it is stopped?

[@aliagar8673]

Thankyou bro, can you show me that how make emergency stop?

[@LyNguyen-tb1lz]

thanks sir. i wonder can you explain to me why do you close D.O outlet Valve before open FO inlet.i think D.O pipe will be compress to high

[@topingsworld4381]

Good day Sir. To change over valve from D.O to F.O , Open outlet valve of Fuel first then close the outlet valve of Diesel then Open the inlet valve of Fuel and close the inlet valve of Diesel. To prevent Fuel oil going to D.O tank.

[@JuanTheGreater]

❤️❤️❤️

[@nurhossainsagor604]

Sir,why the frequency of the incoming generator must be slightly higher then the running generator?plz answer

[@vasilemocanu6105]

Because if it is not so, when the incoming genset is connected to the busbar, there will be the possibility to operate as a motor not as a generator (reverse power mode).

[@jonathanpimentel9672]

Whatsup brother.

[@surendrachavda1245]

What is acceptable value of voltage,frequency and angle at synchronisation time?what percentage of error acceptable

[@topingsworld4381]

440V, 60 Hertz

[@sergiyt7449]

Keep it up, but you didn’t say about starting the diesel pump, you mixed two topics. Please make a separate video on the transition from one type of fuel to another

[@topingsworld4381]

Thank you for the suggestions Sir. I will improve my video next time.

[@hustinoa3033]

Hmm siguro nakastart na kasi yung diesel pump gawang running na yung isang generator kaya hindi na nabanggit.

[@d-prayboytv5842]

Proper way 👆👆

[@kolokoyako8179]

Mechanical engineer parin Ang nagaayos Ng mga makina Ng barko

[@ryomarch3479]

Hallo Sir...what trouble if generator engine,fuel oil pressure so high pressure? 4.0 mpa over, so high.. Normally 1-2 mpa...

[@topingsworld4381]

Maybe the outlet of fuel valve close or outet pipe line clogging. But in other generator there is a valve pressure regulator near at the F.O duplex filter

[@kennethjamero4075]

sir procedure naman po on how to stop the generator

[@topingsworld4381]

Next time po. Thank you for watching Sir❤

[@makinistangmandaragattv5560]

Ano agency mo sir... magkno bigayn Ng 3e jn

[@topingsworld4381]

Bouvet Sir. Sakto lang para makabuhay ng pamilya Sir hehe

[@AlexanderTheGoat25]

Ano po yung D.o? Di ba po ang f.o ay fuel oil?

[@topingsworld4381]

Diesel oil po

[@BonJoviCrisologo]

dina download ko mga video mo sir salamat

[@Mostakinur17]

manned engine are defecult , In my vessel have unmanned gen also

[@kenlysipe5173]

Timing nabatian lang d sang upod ko tingog mo sir. Taga bouvet ka gale ? 😬😬

[@topingsworld4381]

Hehe. Yes bro.. anong barko nyo?hehe thanks for watching❤

[@user-unji5h2k3nw69]

07:42 why don't forget synchroscope s/w ???

[@ivanfmartinezm]

YAMMAR The best Generator from the Galaxy. I love it, Daihatsu, bull Shit. Caterpillar is the worse of all them ETO from Venezuela.

[@topingsworld4381]

Same sir. Yanmar is the best❤

[@ayeayesoe2793]

I am a school

[@ryanvalendez3328]

Indiano accent