How to start + Line 14 | Roblox | OSVed's Trolleybuses place | #1

Game:
In this kind of tutorial video, I look at how to start a trolleybus, how to go through the switches, how to perform the maintenance of the vehicle ... After performing all the procedures, I served line 14 & More.
In this Roblox game you take control of a trolleybus. You are free to choose which line you want to run or you can just drive freely.

[@O5Councilor]

Respect to him still helping everyone even after one year in the comments

[@Bedinaanideb]

Respect for helping people even when you have -24 driver points🗿😭

[@Noname-CB]

😄

[@alif-yr4jz]

Thanks for the video it's will useful for me

[@NewBuildmini]

Didn't expect to know you play ROBLOX too. I am a developer of a British transport simulator, Destination: Benford, which is currently undergoing development.

[@Noname-CB]

I didn't play Roblox before I learned about this game. " I am a developer of a British transport simulator, Destination: Benford..." - Very interesting! I will try it.

[@noob-cz8mu]

The best trolleybus game!

[@Noname-CB]

For the time being, yes.

[@Charlie-oz4ll]

I play this one too, it’s quite hard but fun when you get it right. A tip is to use the pole catcher wrench by right clicking on the circles were the wires come from so they are activated. That way if your poles come off they don’t go flying everywhere and return to the top of the bus. You should also try stepford county railway.

[@Noname-CB]

Yes, it is difficult at first. The pole catcher on the one hand is useful but on the other hand you always have to carry this tool with you. Thanks for the suggested game!

[@superflip1729]

@Charlie you are kinda like me

[@teevasu.t]

Thanks, I am near to make my computer fly for the pole keep flying off.

[@deltalegacyone]

It’s easier to focus your camera on the wire to attach poles

[@starflight_wof39]

@@Noname-CBtry british railway

[@zohorhoubane6361]

So cool

[@danidimitrov8847]

thank you very much for letting me know how to start

[@GalileZinski]

Eu nunca imaginei assistiria a um vídeo de Roblox de Trólebus, foi legal o vídeo, porém prefiro as séries de Sovietic Republic e de Cities Skylines.

[@Noname-CB]

I decided this to be one of the special videos for the 100th episode of W&RSR. Otherwise, the other series continue.

[@Lotplayz]

Is it normal for Reverser wrench to not work because when I try it doesn't work

[@Noname-CB]

No it's not normal. There are two options: the first is that you are doing something wrong and the other is that there is a problem with the game.

[@Sinfearsme]

can you drive the Ziu 682 or the 10 bye the way cool video dude

[@Noname-CB]

I have videos with 10 and thanks!

[@launcherxofficial9893]

What to do when there is a ringing sound and the bus will not move ?

[@Noname-CB]

The rods have come loose. In other words, no power.

[@kylegabrield.calugas4062]

Ngl now that im used to attaching the polls its kinda easy now

[@matrixroblox2803]

Please make a tutorial on starting buses in Sunshine Islands

[@Noname-CB]

I haven't played this game. I'll take a look...

[@Kalafior2001]

its a nice game, but can you explain this? i follow every step of this video, the bus starts and works normally, i get to the depot gate, and it doesn't want to move right after, please help if you can

[@Noname-CB]

Most likely the poles of the trolley are in a switch. At least I haven't seen it mentioned anywhere, but from the experience I have I know that I have to make sure that the poles always go through the switch and not stay in it because the trolley will not have power. In the game (I don't know how it is in reality) there is power only in the "wires" but not in the switches.

[@Kalafior2001]

@@Noname-CB nvm it was not switching Control circuit back, thanks tho

[@Br672Fan]

When I drive, my poles always disconnect but I didn't do anything wrong, did I forget something?

[@Noname-CB]

Do you drive fast through the switches? By the way in laggy servers it is more likely to disconnect the poles(these are my observations I don't know if this is the case). Try a singleplayer.

[@NomralSwiss_Guy]

what spawn did you click?

[@Noname-CB]

The depot on the main island

[@Sabriochee]

In this game can we have a gps or a map of the road?

[@Noname-CB]

As far as I know, there is no such thing, but I'm not sure. You can find a map of the lines in the discord server. (driver-guide)

[@HoovyGaming]

well from what i know theres this purple line now that shows up when you put all the boards for the line

[@redundant3187]

How do you change your pole routs like if it splits into two how do you make it to where you go the way you wanna go instead of where it takes you.

[@SullyB.]

If you control circuit is on you go left if it is off going through the switch you right, make sure to turn it back on afterwards so you can accelerate

[@Noname-CB]

As @Sully B. explained to go left you just need to start accelerating (W). The right is more specific, because in principle if the compressor works you have to turn off the control circuit (E). But if it doesn't work, I personally switch without turning it off, you just don't have to do anything until you switch. I guess it seems confusing, but if you don't understand what I mean by the previous sentence, just do what I described above.

[@rubik777]

no sound on wires when poles pass connectors - pity

[@nhatminhtran5487]

Can you do tutorial at Hardbass Depo? :(

[@Noname-CB]

This part of the map is currently unfinished.

[@jace3121]

Hardbass Depot is practically the same concept as the Main Island.

[@purek9061]

sequence isn't working what i need to do ?

[@Noname-CB]

Restart maybe ... it's a matter of many possible reasons and solutions

[@vladutposada7936]

Hello i have a probleme i can t turn on sequence

[@Noname-CB]

Me too

[@ruaanhg]

mn eu segui o tuturial todo mais quando eu vou apertar ali na sequence ela nn vai como faço pra consertar

[@Noname-CB]

Try to hold on.

[@ingusaugstmanis5796]

One big question.How can I know where to turn?

[@Noname-CB]

I think there was an option in the settings whether lines should be displayed above each intersection showing the direction of the particular line you are moving along.

[@SzabiaKiraj]

how can i go forward?

[@Noname-CB]

When you prepare everything correctly with the left button set the direction to "forward" from the reverser lever. I have no idea where your problem is... Maybe you're missing something?

[@neogarcia7319]

Instructions unclear I am now locked outside the bus

[@Noname-CB]

Aww yes that is possible...

[@FlaknBail]

I can never turn the sequencer on. it justs flicks off again

[@Noname-CB]

Same here.

[@viktoruzunov690]

bro i can see me in the end of the video🤣

[@Noname-CB]

What's the chance😄

[@RobloxainYTPlayz]

Can you help me with the sources it won't turn on I clicked it and it won't turn on

[@Noname-CB]

Are you sure you are following the steps correctly? And does everything before that work? My advice is to try again and watch carefully because you might be missing some small detail.

[@RobloxainYTPlayz]

@@Noname-CB Ok by the way you can probably add me on there. My username will be gethio8InMyOldAcc if you add me as a friend on there, you can probably teach me some more

[@CrazyPlayss]

how do i zoom in and sequence isnt working for me either

[@Noname-CB]

"M"

[@CrazyPlayss]

@@Noname-CB yeah just figured it all out lol

[@Noname-CB]

👍

[@CrazyPlayss]

@@Noname-CB ye I also have a question what’s the longest line in this game?

[@Noname-CB]

In my opinion, the longest line is 10.

[@applejack9371]

Why is my bus derailes the lines everytime when turing left and right then dies?

[@Noname-CB]

Well, for example, too high a speed, worn pole heads and remember that when you want to go to the right you do not have to press the accelerator pedal. Also, if your compressor is still running, to switch to the right you will need to turn it off (E) and after going through the switch, turn it on again. Going left is easy - just press the accelerator just before the switch.

[@applejack9371]

@@Noname-CB Thank you so much for advise 😊

[@thatunionboy]

When i turn my sequencer on, it turns off automaticly, what do i do?

[@Noname-CB]

I can't think of anything other than a bug right now.

[@thatunionboy]

@@Noname-CB lol, i already solved the problem :D

[@andrewforest6905]

@@thatunionboy what was the issue? Having the same issue.

[@thatunionboy]

@@andrewforest6905 Well you just need to hold the sequencer for a time i think, if your bus doesn't move, check the motor breaker and try to change the ropes you are on.

[@TheDee87]

Btw try ro-320

[@Noname-CB]

👍

[@ecy124]

why i cant find the adjust reverser thing

[@Noname-CB]

What exactly can't you find? It's under the seat. And the handle itself is in the tool bag.

[@SkewardlySkewZaneShennanigans]

Soviet era trolleybus.

[@Noname-CB]

Yep

[@norwegianecuadorianmaps]

When i try to drive when i am all set then its A2 and i cant move

[@Noname-CB]

Depends on the trolley model but looks like a problem with the switches behind the drivers seat.

[@Goldpoo227]

check the main breaker, it goes out at random times

[@len_ntahapa8327]

I can get my sequences button on help

[@Noname-CB]

Hold it when you need it.

[@dinonugget2306]

can you tell me how to prevent the pole from getting snapped :(((

[@Noname-CB]

Of course ! - Replaced pole heads reduce the chance of the pole derailing. - Also, one of the most important things is speed. - Now I will share some personal impressions about the speed: * We all know that we have to go through the switches slowly (15-20kmh). This is probably the most appropriate speed with which to go through the switch. * Another thing that I noticed and which is quite logical is that at a high speed of about 50 kmh it is quite likely to derail even on a straight section. - Summarized - change the pole heads; pass at low speed through the switches; reduce the speed on sharp turns and on straight sections and do not exceed ~ 50 kmx. I hope I helped.

[@dinonugget2306]

@@Noname-CB THAKN YOU THANK YOU THANK YOU SO MUCH!

[@dinonugget2306]

@@Noname-CB oh and do u have the link to their discord so i can check the map or something...

[@Noname-CB]

discord.com/invite/QNY3XG3

[@MajorAce_usedtobeMechchad]

@@Noname-CB My pole snaps even in depot when i have serviced the pole heads, when i drive like 10 kmh and follow the lines. This game is just made to be frustrating!

[@Nassos_Pap]

How do you know where to go??

[@Noname-CB]

There are line maps in the discord server in the driver-guide section. You need to go around a bit and you will learn the map.

[@kirsipiiroinen929]

How can you drive backwards?

[@Ren4RR]

turn the reverser backwards which u get by tool box

[@Noname-CB]

At 0:53 you can see how i take the reverser wrench and put it on. It determines the direction of movement. If you left-click on its upper end it will move from neutral to forward. To move backwards you have to right-click - this rotates one position backwards. If it is in a forward position and you want to move backwards, you have to click twice.

[@J0rdanYu]

Yo, it’s me again, now my problem is gud now, I can finally drive out the starting place, but my wire poles kept on fleeing away and my bell rings lol, anything I need to know or prevent? It’s so hard to face this problem every time, imagine this kept on happening in real life 😣

[@J0rdanYu]

Btw already did go slow by the switches like 15km somethin, and I also maintain the speed of 35-40 km per hour, idk why but it just fells off even on the speed if 31 km per hour, and the alarm bell go riiiiiingggg or brrrrrrr meme XD

[@Noname-CB]

I can tell you the following: - I guess you know you need to change the pole heads -passing through switches and the like should not happen more than 15 km / h (for the safest) -I noticed that the number of people on the server probably affects these things but I'm not sure. Therefore, you can create your own server in which only you can play and possibly your friends if you invite someone. I can't think of anything else for the moment

[@J0rdanYu]

@@Noname-CB I did change the pole heads, maybe I should be more careful when driving 🤣🤣 ok thx

[@Francisco20106]

how to enter the dc of this game? I'm not getting

[@Noname-CB]

What is dc?

[@noob-cz8mu]

Umm just go to the game, and at the description scroll down , You will see

[@JustaTACA]

and swicht of sequence is very bugged

[@Noname-CB]

A lot of people think so...it would probably be good if the developer change the way this button works.

[@Computer895]

How do i join the discord server where is the link

[@Noname-CB]

When you get into the Roblox click on the game(don't run it) then scroll down and you will see the discord logo which is a link to the server.

[@gianglethian7129]

How do i reverse?

[@Rochefort-Frank_1]

Press right mouse

[@Noname-CB]

See 4:01. Use the mouse buttons - left -> 1 position forward, right -> 1 position back.

[@TacoPro.]

what is the edior app?

[@Noname-CB]

I use kdenlive to process the videos.

[@TacoPro.]

@@Noname-CB is it money for it or is it free?

[@Noname-CB]

It is free.

[@TacoPro.]

@@Noname-CB idk how to use it lol

[@Noname-CB]

It is similar to other such programs. Watch tutorials.

[@patrickmaaya5285]

bro what the hell the sequence keeps turning off like i cant even turn it on bruhh

[@Noname-CB]

Same here.

[@ZyteXtrabyte]

How do you get -24 points?

[@Noname-CB]

This happened when you ran a red light.

[@mozdonyfan4154]

and how to zoom?

[@Noname-CB]

"M"

[@mozdonyfan4154]

@@Noname-CB thx

[@JustaTACA]

bro how to zoom?

[@Noname-CB]

With "M"

[@norbert099]

bruh I thought that it would automatic. know where you need to go....I lost contact so many times. Now I feel like a idiot.

[@Noname-CB]

It is difficult at first, but after some practice it becomes easy.

[@InFlightAce]

👀 Google brought ya here? Give this comment a 👍, man.

[@Noname-CB]

👍

[@paintballnoob7697]

imagine seing "antidisestablishmentarianism street" 💀

[@Noname-CB]

😩👍

[@justacreator578]

it doesnt work for me no video works for me

[@Noname-CB]

What exactly isn't working for you?

[@noob-cz8mu]

@@Noname-CB Maybe bus not starting?

[@adwarnissan8990]

It's not working

[@Noname-CB]

What does not work?

[@roemerjonker284]

This game is broken

[@Noname-CB]

There is something like that... But so far it's the best I've seen.

[@roemerjonker284]

@@Noname-CB I get always -100 points

[@roemerjonker284]

@@Noname-CB red light skip -30 an earning points is really low

[@gunawanreivawibisana9665]

@@roemerjonker284 hmm thats why

[@noob-cz8mu]

@@roemerjonker284 don't skip red lights then lol

[@binebockelmann7511]

Its fake

[@Noname-CB]

Which or what?

[@Wotomolon]

Cus you can't do it

[@Noname-CB]

I don't understand what but okay.