HOW TO STONEWASH A KNIFE. DIY

RESOURCES FOR MAKERS AND AMAZON AFFILIATE PRODUCTS
My Book - If you’re looking for a place to start in blacksmithing this is an invaluable resource that was written FOR YOU!
amzn.to/2l8pyMm
Heavy duty wire brush (for scale/slag) - amzn.to/2MutSSL
Spray adhesive (also kills hornets) - amzn.to/2LTu7Wm
THE BEST metal grinding rocks (heavy stock removal) - amzn.to/2Mxh5ik
Blue Dykem - amzn.to/2LQfhzW
Red Dykem (if you want to be a trend setter) - amzn.to/2JIkdtR
STRONGEST Epoxy for knife makers - amzn.to/2tmxtcI
Acid for etching Damascus - amzn.to/2ld0OTm
JET shop air filtration system - amzn.to/2JP4UzB
Metal cutting disks - amzn.to/2t0JPrt
Sharpening stones
www.hoffmanblacksmithing.com/...
My Website
www.hoffmanblacksmithing.com
Music courtesy of Epidemic sound.

[@jackreeves3001]

Multi faceted kid! You are amazing. You have diffinetly found what you need to be doing. Great work.

[@Cadwaladr]

I was just thinking I might try it with rocks in a coffee can, so I'm glad you said that. Might also try etching with sulfuric acid, because I already have some.

[@TheWVgoodguy22]

Thanks for sharing this quick tip video on how to stonewash a knife. I too think it is one of the better looking/cooler finishes one can put on a knife. Kind of gives it a more rugged appearance. I have a brass tumbler for reloading, but I know that I wouldn't want to mix the two application, so I may have to go with your budget suggestion at first. I still haven't found/figured out my anvil and forge situation and where to put a small shop on my Dad's property so I may have to go the stock removal route to get practice in designing knives, finishing blades and handles and this would be sweet to add to that. Thanks again Liam.

[@dwaynegibbs8371]

Thank you for the information. I have always wondered how this finish was achieved.

[@DiesInEveryFilm]

Great video Liam thanks I definitely need to try this process again 👍🏼👍🏼👍🏼

[@LHR10mm]

Stonewashing also helps deter rust . Great video thank you !

[@slackjaw703]

I had no idea how that look was achieved. So quick too. Pretty amazing. Love these videos! Thanks, you really rock (pun intended).

[@Rsc-dz2sh]

Wow that looks great and you made it seem pretty easy! Thanks for sharing

[@calebsteck7183]

Thank you for the video Liam!!! I am going to try it on my next knife.

[@filmreview4604]

The advice about sanding at least up to 320 grit was invaluable. Couldn't understand why my etching looked so bad lol Thank you Sir!

[@Gleidur]

Great video, I really like the more rustic look on knives!

[@johnjude2685]

Great look! Thanks for showing

[@PsychoKillerSquirrel]

This was a very humble and informative video. You are new in my list of recommended but have earned a sub. I'll be checking in to see what else you produce.

[@jacechatman2703]

Great job man that looks awesome and always love the vids 🔨💪

[@charliedurham1954]

Beautiful knife,great video. Thank you.

[@TheGoodoftheLand]

Such a cool finish!

[@davidscadlock5569]

Thanks for the excellent tips on how to!!! Like your knife design - very tactical!

[@ashleymaclennan3615]

That was an amazing tutorial. Thanks so much.

[@Wundercc]

You are quite the green thumb lol. Thanks I am actually going to try etching my first knife this weekend and this answered some questions I had.

[@shane4176]

Thanks so much I'm going to give it a try

[@sicdigz80]

very cool! want to experiment with this!

[@terryRBNF]

Thanks so much, best of luck!

[@jerryjohnsonii4181]

My father, God rest his soul teached my how to stonewash my knifes. But you have a more details on how to do it step by step Mr. Hoffman. I really learned a lot and thanks for the knowledge bro.

[@74verseveld]

Nice... Awesome blade...

[@fromsparktofire]

Thank you for the video.

[@ziploc53]

Thanks for sharing

[@trulsdirio]

Sandblasting before stonewashing also works really well and quickly. Takes off hardening scale in a minute and leaves it ready for etching.

[@tykellerman6384]

That’s a helluva stack of knives thanks for the video interesting

[@roberthughes6240]

Hi, great video, could you do a video on sharpening angles for different purposes, IE what angle for a chefs knife or a hunting knife, whether its better to have a thin blade v's a thicker one and what would be best to make the knives out of. I would like to make some knives, I currently only do architectural iron work but would like to diversify!

[@stevenmoon8903]

I appreciate the advice. Your work is outstanding.

[@benroper294]

Thank you

[@davehennon4146]

Very nice finish, that's the first time I have seen that. I look forward to trying it myself. Thank you. The only criticism I have, is a better close-up shot of the finished blade would be appreciated, for my old eyes. Very good instructional video. Go for what you know.

[@oneshotme]

Thumbs up and enjoyed as well!

[@tobiasschwobble8885]

Thanks bro!!

[@page76metalcraft19]

Hey man thanks for the great video. I just started experimenting around with stonewashing. I’m wondering if I use that same Tumbler with Pea gravel if the result would be similar? Have you tried it?

[@poelmeister]

3:50 nice pile of awesomeness. :)

[@silentblackdisc]

Helpful in numerous ways. Going to procure that vibratory tumbler. Subscribed! Bumped from 2.2 to 2.3K likes :)

[@grapplergirl10]

In between etching and adding the final oil at the end, could you etch a logo into it? Or is the logo first then the etching and tumbling? Thank you

[@jeffhawkins900]

Good video .. Bro

[@brandon87ize]

Just stumbled across this video and got a good laugh out of the watered plant.

[@dlbknives4869]

Do you apply anything special to the blade to keep it looking good after completion? I mean something besides WD-40 like a special oil or linseed oil or type of wax?

[@donnelson4770]

Great Video..... How do you do the tang now?

[@duesing6]

What steel were those knives made from? I liked the dark etch they took.

[@GeorgiaDOGG]

which media did you get from McMaster-carr? I live in Ga and need new media for stonewashing

[@christophercranmer2397]

sweet video.just subbed.

[@piercefam1]

Two questions: what is the acid...name/brand (where would I find it) and what do you do to protect the finish post tumbling? Thanks!

[@jimaspinwall7814]

If the tang is exposed in the handle, should it also have the patina of the blade?

[@bogrot69]

Great job man, I love that look, gonna do some of mine. BTW , can I borrow yer tumbler man.

[@ChuckSpringfield]

Will you be putting that stack of blades for sale on your website?

[@CCumby007]

How does this finish hold up against rusting?

[@abhaasmith1985]

I can't get ahold of feric cloride but will muriatic acid work?

[@reubenwolfe1323]

I have a question about the etching, I have tried using 40% ferric chloride acid and on my test etches they just come out flat grey even when I have left it in for 40 minutes in like yours whee it come out black ... where am I going wrong ????

[@futuresonex]

If you're just getting in to this you can get less expensive tumblers. I've got a Franklin Armory tumbler that I paid like $65 for. Any sporting goods store that sells reloading supplies should have one.Just remember, you do get what you pay for. Don't expect a $65 tumbler to be professional grade.

[@timfowler4642]

What was in that watering can to cause ceramic stones to sprout a tree?

[@Bartleyblades]

What's the purpose of adding water to the tumbler?

[@mr.frogman9939]

Id love to get a stonewashed finish on a flip knife I'm gonna rehandle but dam I can't buy all the stuff needed for just one blade, unless I can just "stonewash" the current black paint stuff on it

[@mattpowelluk1]

Mr. Frogman99 yeah you can, if you’re on about the factory black paint that is put on knives apparently they come out looking pretty good when stone washed

[@pauldelaney6380]

Does a stone wash finish impart any corrosion resistance?

[@aaronmconie534]

Can you get the same result with 1075 carbon steel

[@MrBAMAREDNECK]

You should have been on the Super Champion FIF episode!!!!

[@vanillathunder8112]

How long was the first etching time?

[@kquanie]

Will your jaegars be available again??

[@mikemcfly3157]

Could I do this on a ring

[@dofler]

Great vid, question. Can I use vinegar instead of acid? What do you recommend for stone washing a large blade like a kabar BK9 please?

[@lsubslimed]

dofler - You _can_ use vinegar, but the etch will be more of a light grey instead of a dark grey/black that a ferric chloride etch will create. I've seen guys use some things such as a foot and a half long or so (whatever will fit you blade with left over room for the stones and space to tumble) section of pvc pipe and seal a cap on the bottom then fill it with rocks (or other tumbling media) and then put the blade in, put some type of lubricant in, then put a cap top and finally shake it or roll it around on the ground until they get the look they like. Do some google searching and you'll surely find some creative and simple DIY/makeshift tumblers or other homemade stonewashing devices.

[@kelamuni]

cool

[@frithsteadfarm904]

The key to this is not leaving it in the tumbler too long. Took me two or three blades to figure this out.

[@bennettsnipes2013]

Do you etch the tangs as well to match the blade finish? Or do you leave the spine and tang polished?

[@chadmccormick8763]

Bennett Snipes instagram.com/p/Bgbeh_IhjkS/?igshid=189jnat6es8p2

[@PaulK390S90V]

Couple questions. I have tons of knife and have been collecting and sharpening for a while but just recently I have started anodizing and also got a 1x30 belt sander with 5" disc, one of the small ones. I also just bought stuff for stone washing and acid etching. So do I have to sand the knife up to 320 with the belt sander and keep the lines going the same way and perfect or would it work if i do it with my dremel or by hand...I'm asking because I haven't used the belt sander yet and not sure if I can keep the knife shape exactly with say hollow grinds and flat spots and stuff. Second question is do I have to acid etch before stonewashing? What are the benefits? Just a darker stonewash look? I wasnt going to get the etching stuff but decided last minute. They will all by folding knives that I'm doing. And I also have nail polish to do where the washers go and the detent ball radius before etching. It must come off when I stonewash but not be a big deal?

[@lsubslimed]

Paul Lonardo - If you can't get a decent finish off of a belt grinder (sander) then hand sanding is definitely the way to go, as a Dremel will mostly likely mess up the knife/finish. Do a quick search on KZbin for "Nick Wheeler hand sanding 101" and you'll learn the basic and proper techniques to get a decent hand rubbed finish. You don't need to etch before stonewashing, unless you're going for an "acid stonewashed" look, which is what makes the blade darker to highlight the stonewashed effect and what Liam did here, otherwise it will simply be a stonewashed blade with all the same color shade, which can also look nice, but it's pretty much a different look. Good luck!

[@PastorCarney]

Thanks for the video! Question: It appears that your knife design an exposed tang. Doesn't it create an unsightly contrast between blade and tang when the knife is finished to only etch the blade?

[@silentblackdisc]

Scales will be applied later? Not etching the portion of the blade that will come in contact with and be hidden by the scales, prevents removing too much material that may make contact with the scales less even and consistent, especially when requiring crisp square edges on the tang.

[@janus2059]

I really want a Jaeger.

[@yishujia186]

Why are some stonewashed knives are silver in colour? Did they simply skip the acid etching process?

[@tigrarulez]

Can you reverse the procedure after stone washing??Making it shiny again?? I have a new model Safe Maker Push dagger that apparently is stonewashed from factory but i don't like it..... Appreciate any info

[@JackSilver1410]

Sandpaper and patience. Start with maybe 220 and start working up. 600-800 is a good working finish, once you get into the thousands you begin to approach a mirror polish. Add in a little glass cleaner now and then, I find that helps me get a finer finish. It's messy as all hell and takes a while, but set aside some time to do it, grab some music to listen to and just get lost in the process. I'd also suggest doing one side at a time so that you can flip the blade over and get an instant look at how far you've come.

[@lucalaferla6601]

can you do a stone wash in a rolling tumber like a car wheel?

[@lucalaferla6601]

what was the specific media you used

[@FoxBonly]

Is the finish more durable or is it just that it has the ability to hide scratches better? Ability to hide or camouflage scratches is not the same as durability.

[@odmods]

Just what I’ve been looking for , thanks for passing on the knowledge. Can I ask when it comes to say a knife grip being a different colour is this where you just anodise it beforehand then use the same tumble method with 3x media Thanks once again

[@SantaPlaysPickleball]

Do you find that multiple etching cycles produce darker results that a longer single cycle? Will two, five minute cycles darker more than one, ten minute cycle?

[@lsubslimed]

RC 80’s Kid - Shorter etch cycles with more of them is almost always better than fewer etch cycles that are longer. For example, when etching pattern welded steel, one long etch will end up making the patterns look more "fuzzy", while shorter cycles with cleaning off the oxides between each etch will provide a more high def look that's more clear and more chatoyant, which basically means that it catches the light at different angles to create more depth and more shimmer). The key seems to be cleaning off the oxides between each etch cycle so that the acid has a fresh surface of the steel to etch. Keeping them somewhat shorter helps keep the oxides from building up of the steel and affecting the etch, which happens if left in the acid for too long. At least this is how I've always understood what was happening. Almost forgot to add that another benefit of shorter cycles is that you can keep an eye on the progress and make sure there are no odd blemishes caused by oil (or something) on the blade to keep them from getting away from you during a long etch.

[@74verseveld]

Where to find the finished knife??? 😉

[@theproudamerican178]

Cool video bro. I’m glad I came across your channel I’m definitely didn’t that subscribe button

[@toxicfpv304]

Ia that a jistin thompson knifes shirt?

[@alvindueck8227]

Stone washed. That's new to me

[@crashwelder5337]

is that knife forged?

[@BigMoney429]

where can i purchase the knife shown in the video!???!

[@londiniumarmoury7037]

I threw a sword in the ocean, just waiting for the tide to do its magic, then i'll pick it up tomorrow morning.

[@dracobruhma]

Did you get the sword?

[@evaderknives]

Why aren't you neutralizing the acid? Just wondering, because I have forgotten to do it before and found a rust colored finish popping out after a few days... It doesn't happen all the time, but it does happen... I use to use windex, but that can be inconsistent too, now i use baking soda... Another thing i found, if you coat the blade with wd40 before you put it in the tumbler, it will give it a different finish too... Great video, take it easy...

[@jagerfromgsg945]

Dave Erving Evader Knives how do you set up the baking soda. I’ve seen Alec Steele do it and hisbis a liquid. I’m sorry for being so new. Any help would be greatly appreciated.

[@evaderknives]

@@jagerfromgsg945 No problem, I actually just keep a box next to my basement sink... Every time I'm finished etching, i put the knives in a pan, put in some baking soda, then fill it with water... I don't know if i would actually let the solution sit after neutralizing... I know with muriatic acid(basically what ferric is with Hydrogen peroxide), baking soda turns it to salt water.. So mix each time then dump it.. Hope this helps..

[@evaderknives]

@@jagerfromgsg945 We all have to start somewhere, I've actually got a lot of videos on knife making.. Good Luck..

[@jagerfromgsg945]

Dave Erving Evader Knives would soda bicarbonate work? I’ve heard that too.

[@evaderknives]

@@jagerfromgsg945 Same thing, just different name for different locations

[@George-hl3qj]

Whta the correct name of the type of acid I need?

[@nathantimmons1362]

Ferric Chloride

[@vickyvonstein2331]

8.22 Dude i thought you were taking a wizz on that..

[@aldogressa6708]

Fantastic, Sorry I don't understand English. What a superficial treatment before the drumming with stones.

[@dlbknives4869]

I'll ask once again....Do you apply anything special to the blade to keep it looking good after completion? I mean something besides WD-40 like a special oil or linseed oil or type of wax?

[@acy0029]

Renaissance Wax is great as a rust inhibitor I buy mine at K&G supplies in Arizona. www.knifeandgun.com/SearchResults.asp?Search=Renaissance+Wax+&Submit=

[@hyperhektor7733]

8:20 that fairy tail sound cracked me up xD btw i wonder if you temper* the knife to become golden (before the etching step), if th golden color comes through after the tumbling? *en.wikipedia.org/wiki/Tempering_(metallurgy)#Tempering_colors

[@willelliott8100]

You probably know already but just tryna help, wd40 is slightly corrosive, not sure if that's what you're using to oil your knives but wouldn't want them corroding on you

[@evilbrat5376]

Good video but personally I don't like the tumbled look. Acid etch, rinse, dry, finish sharping and hey - that me.

[@ronalddunne3413]

Gloves, great! Eye-protection= big fat 0!!

[@SamM-ji3bv]

Why don’t you do this to the tang, if you do a full tang it will show the none stonewashed stuff

[@HoffmanBlacksmith96]

Why don't you?

[@SamM-ji3bv]

Hoffman Blacksmithing I was saying if you do an exposed tang and only stone wash the blade then you will see the un stonewashed metal and it will look weird won’t it?

[@joebreeding449]

Close up of the blade would be better 🤔can't really see it .

[@supermusclemaniac1]

Thanks for not answering anyones questions!

[@MEME-qe4ze]

stonewashing is not for me. it weakens the steel, and scratches the etching, making it more prone to rusting. no thank you!

[@brianpennington8608]

Stop yelling, take off your ear muffs

[@TheDontbeEvil]

bro, have you ever heard of editing?