How to stream live video on the internet--using 3+ cameras and Wirecast.

[@TheSchoolOfGuitar]

Is it possible to get one device that you plug in all 3 cameras to go into the laptop or do you need to buy a separate piece of hardware for each camera you connect in? Thanks - great tutorial!

[@sterlingteaches]

If you only have HDMI out on your cameras, I don't know of an external device that brings in multiple HDMI (manufacturers that you might contact to see if they make something are: aja, black magic, or Matrox). There are some cards if you want to build your own computer. If your cameras support SDI output then a great piece of hardware I started using recently is: The AJA 4kio www.aja.com/products/io-4k it supports 4 SDI Video inputs OR 3 SDI video and 1 HDMI input and it can be daisy chained (have not tried daisy chaining yet). It requires it's own power supply but it works well for bringing in multiple feeds into a laptop.

[@iskconkanpur]

hi i have Blackmagic but i don't have thunderboit can you help me out is there any other way to connect or can you keep a link for thunderboit which has a usb output because i want to give input to desktop not to mac so that i can purchase

[@journeymanandwoman]

Thanks for the info. So far the only video I have been able to find that really breaks down the basics. Now I have a much better understanding of what I need. Thanks again!

[@GustavoArceMusic]

hello, what cable did you use to conect your secon camera to the computer, the first one is a Thunderbolt, the third camera is usb 3 but the second camera what cable did you use please

[@sterlingteaches]

The laptop that I use has 2 Thunderbolt connections, so for camera 1 and 2 I used Thunderbolt, for camera 3 I used USB 3. Older model macbooks may have a firewire port and thunderbolt. Firewire used to be a standard way of connecting cameras to the computer, but I have not used it on a mac laptop, so I don't know what hardware is available to connect it to current cameras.

[@GustavoArceMusic]

Sterling Teaches main is a MacBook pro 2011 it has FireWire 800 , one thunderbolt that I connect an external monitor and it has two USB , what devices and cables do I need to get please. I appreciate your help

[@jroar123]

What if your Mac Pro doesn't have a Fire Wire port? Is there a adaptor that might work?

[@MrGodchild15]

Intensity Shuttle mines dont have the Usb 3.0 compatibility it had the mini displayport(Thunderport) & I cant find a usb 2.0 or 3.0 to displayport(thunderport)

[@DanielRecordsMx]

How much the output frame grabber has usb? and that the store I can get?

[@anthonybaber7991]

Question. Will this work for a basic internet tv station setup? Maybe something that might be a step up? Thank you.

[@sterlingteaches]

+Anthony Baber Yes I think it would work. It allows you to have multiple cameras going into one place. If you get the pro version of wirecast you can add playlists for commercial breaks.

[@JeremyAbles01]

What about audio? Would you use one camera as the "primary" audio source if say you were using a lapel mic since they were all streaming audio/video back via Hdmi>bmd box>thunderbolt cable or could you use another solution obviously everything depends on camera placement and distance but could you run it back to an audio recorder that has a mic output and bring it into the mic input on the computer and still have wirecast recognize it?

[@sterlingteaches]

+Jeremy Ables For Audio if the venue has a mixer(or if you mix your own audio) I try to get a direct feed I plug it into one camera, then in wirecast I change all the audio inputs to be that camera. Right click on the source and check the camera with the direct line attached to it, and uncheck the other camera audio source. That way the audio doesn't change when you switch cameras. If I don't have a live mixer, I input the camera with the best audio/mic set up. You also can have multiple audio sources selected at the same time. I hope that helps.

[@luisrossy6368]

thanks for the video. wanted to ask what hdmi extender will work with the blackmagic mini receiver and wirecast. thanks.

[@fltronic]

Finally I see the video where everything been explaned quick and simple!!!One more question pls.How can I connect a"sound" from my mixer to it on the background so there was only a clear mix live on top a that video and no any camera mic sound?

[@dukealliefifi]

Cool, I am trying to stream a nest camera inside the bluebird nest box in my yard. They are fun to watch from building the nest until the day they fledge.

[@AdceonOfficial]

Can you live stream with Wirecast on sites for example Omegle? Also can you put a timer on each camera so it automatically changes the camera view over time? It would be fun if i could live stream a house party or something like that this way.

[@viperice]

It will exhaust the bandwidth of the port. Its better to use switcher for more than 2 cameras.

[@TeacherCast]

Great video. I'm looking for recommendations on HDMI Cameras that can be used in a High School Stadium to capture a Graduation. Is there any thoughts on the length of HDMI Cord when using WC?

[@sterlingteaches]

Depending on the budget and what you have for a video switcher there are many things to consider... I use canon cameras, we Have used Canon XA10s (with their optional battery because our graduation is over 2 hours and the regular battery didn't last) but this year upgraded to XA25 and love them! HDMI video signal doesn't travel very far, www.popularmechanics.com/home/how-to/a6751/how-to-extend-your-hdmi-cables/ I tried different things like extenders etc, but didn't work for HDMI over 25', Tricaster makes 100' HDMI cables www.bhphotovideo.com/c/product/1085185-REG/newtek_fg_000879_r001_tricaster_mini_hdmi_cable.html that have worked well for me*--They work well in sending the signal and Wirecast sees it just fine, but the connectors are garbage and fall off easily (If you get these wrap gaffers tape around the connectors so they stay on) I think they are overpriced too, but the cheap ones I tried didn't carry a signal at all. We had to buy an HDMI Mini to HDMI cable converter (don't buy the cheap kind they don't work) We connected these to canon xa10 hdmi mini out with an adapter www.bhphotovideo.com/c/product/981166-STUD/pearstone_hd_aracmaf_male_hdmi_c_m_ra_to.html/mode/edu We were able to upgrade our cameras to XA25 this camera has SDI output which allows you to go much further over easily a couple hundred feet. (if you go this option make sure your switcher has SDI input-these cameras still do HDMI) I bought a spool of coax cable from home depot and made my own cables for our graduation last year and it worked very well- I ran the cable from the top of the bleachers to past where the graduates where sitting so we could see them. We switched using wirecast. It worked very well. If this is out of your budget go with a namebrand camera (sony,Canon) that has HDMI Mini out connect it with the above mentioned connector to HDMI cables or buy HDMI mini to HDMI cables and run it to your switcher (or computer with Tricaster). Sorry for the long answer, I've done graduation a few times and thought I'd share anything that might be helpful.

[@bt10ant]

Jeffrey: Did any of these suggestions help? I am in the same boat, needing a way to put a camcorder on a Win PC for an outside event and would like to know how you made out. Thanks much.

[@Djent7779]

what does the black magic acutally do if you are live streaming? does it work as a external video expansion and render the video and audio without your native cpu and video board?

[@GHUMGHAMCANADA]

does hdmi switcher works to replace the cost of another ultrastudio mini recorder?

[@petenicezz]

so far a great video tutorial seen so far. will definitely get that blackmagic, thx for sharing.

[@souloucc8105]

I cannot get my Macbook Air to find the Canon Webcam connected through the BM mini recorder into the Thunderbolt cable. I can view it in the BM Desktop Video Utility just fine, but cannot get it to display in wirecast or on a test my webcam site. Is there any resolution settings that must be set the same on either device or software?

[@MyLittleBakery]

Can I use Canon g7X for live streaming?

[@michaelhaskins7718]

Great video. I wanted to try to have 4 cameras for a high school volleyball and stream it live. Is theresome way to have all four cameras go to a video where you pick which camera to feed to the wirecast? What upload speeds will be needed to have smooth live streaming? Thanks!

[@sterlingteaches]

If your cameras have SDI video out we use a AJA 4kio for 4 cameras kzbin.info/www/bejne/invCf3WQgt2SY5I If you only have HDMI out from the camera... I haven't tried it, but it looks like a good solution: Atem Television Studio HD, it works for both HDMI and SDI, www.blackmagicdesign.com/products/atemtelevisionstudiohd I recommend 8-10 Mbs upload speed. Stream in 720 to conserve bandwidth unless you have super fast internet. Use ethernet cables not wifi for streaming. If possible be on internet(ethernet) that the fans won't be using they will drop your bandwidth quickly. Here is a chart for bandwidth streaming: support.ustream.tv/hc/en-us/articles/207852117-Internet-connection-and-recommended-encoding-settings I hope that helps.

[@ponyshea4404]

hi sterling... I have an old HVX200 that I wanted to try as a webcam since it has such amazing lens and mics and we are all spending so much time on zoom with COVID. I have a USB C I/O MacBook Pro. how can I get it into that and readable as an external cam? .

[@allenday]

Sterling, thank you. I saw the white box has many inputs. can it be used to stream more than one camera simultaneously into Wirecast?

[@sterlingteaches]

Unfortunately no, it only accepts 1 input at a time, it just has the options of different types of inputs. I haven't found a good HDMI multiple input yet. Here is an external switcher that connects to your computer but I have only read about it and have not used it so I can't comment on it: www.bhphotovideo.com/c/product/766072-REG/Blackmagic_Design_SWATEMTVSTU_ATEM_Television_Studio_Production.html If you have a PC some manufacturers make HDMI Input cards, I have not used them so I can't comment on how they work, but here are some: www.bhphotovideo.com/c/product/1201806-REG/magewell_pc_400_de_hdmi_hd_video_capture.html Hope that helps.

[@allenday]

Sterling Teaches thanks. I have one of the thunderbolt gray boxes and it works great. I have MacBook air though so need to buy the USB version for my second cam. have you used one of those with your Mac?

[@allenday]

also can you make a demo with Wirecast for how to do side by side? is it even possible?

[@sterlingteaches]

I had OS Mavericks installed before and it didn't work on the mac, After I upgraded to the next OS and now on El Capitan (and upgraded the Black magic drivers to the latest) it seems to work without issues.

[@sterlingteaches]

Sorry I am swamped at work and don't have the time to make a video. I don't usually do side by side, but it looks like you have your source click on the gear (bottom right corner of the source) and choose change template to side by side or two together. It will then let you choose source A and Source B. Then right click and edit shot will allow you to get more detailed on how it looks. I hope that helps.

[@theodoris04]

Can i do this on windows too?is Elgato Game Capture HD a solution?

[@rodbardi]

Hi, my MacPro 2011 has , 2 usb ports + 1 Firewire and 1 Thunderbolt ! so .....should i , plug in 1 camera in Firewire and another in Thunderbolt ? right ?

[@iiyanx7]

Can I add more camera sources by using a Thunderbolt Hub and using a Blackmagic Ultrastudio Mini Recorder with each device? Like more than 2 cameras with Thunderbolt?

[@sterlingteaches]

I have never tried it and have been curious if it would work. I have not found anything online about someone getting the setup to work. There is a device that operates independently from the computer, but may be an option, Blackmagic Design ATEM Television Studio HD Live Production Switcher, I haven't used it, but it seems like a good option to get more cameras connected.

[@AndreaSlavenDRE]

When using cameras from various locations away from the computer to get various angles, does it matter the length of the cable vs quality of the video? What is the length of the longest cable that can be purchased for the hdmi video streaming?

[@sterlingteaches]

+Andrea Slaven If you google hdmi cable run length you will find charts that explain how far you can run an hdmi cable. I have heard 50' as a general rule, I have tried to keep it under 25'. Some companies sell longer cables, like newtek tricaster 100' HDMI cables, I have tried these cables and they carried the signal fine, but the cables are cheaply made and the end connectors fell off quickly. If your cameras support component cable (red/Green/Blue) cables you can get the distance considerably further but requires 3 cables Plus 2 for audio. You might contact a reputable vendor that specializes in video equipment and ask them they could give more specific details on length. Hope that helps

[@KalenjinInternational]

Which camera could you advice me to get.

[@MrMusic32150]

If I go though this process, can I control who can view the live broadcast (at the time I'm broadcasting)? I'm an entertainer and want to be able to provide my services via the internet to specific locations, but block anyone who is not a paid client.

[@lady7571]

gary knowles hey sorry I can’t answer ur question but I’m in need of advice as well I’m trying to decide if I should buy the cannon vixia 70 or 82 I want to make long 1hr videos and be able to live stream but I’m not sure between the two is best I need buget friendly at the moment I’m just worried about the Quality of the video from vixia R70-80 and the compatibility with this older device with my new iOS devices I have

[@sterlingteaches]

Gary, This process is just to get the stream online, to control who sees your broadcast is more about the streaming provider. I haven't tried that so I can't comment much on it. You might check with livestream.com/ to see if they offer that option.

[@sterlingteaches]

Lady Tee, The Vixa 70 / 82 are pretty much the same thing, the 82 has double the memory. If you are on a budget check out www.bhphotovideo.com for refurbished cameras and you can get a good price on one of those models.

[@lady7571]

Sterling Miller thank u for the reply the only reason I was concidering 70 was because of the AVCHD format compared to the mp4 format I heard it cuts every 15-30 mins but it has more space as u said and WiFi. I find that may give me a problem with the cuts within the editing process. I don’t want it to be noticeable because I will be making long videos 1 hour long max and I’m trying to get a good opinion for a starter I also need the WiFi so I could live stream.. on YT.. I know the 70 is a older model an I’m worried about the WiFi being compatible with my current iOS Devices. which model more compatible with current ios with the WiFi option and which allows for an additional mic? is the r80-82 mp4 format hard to work around or is the AVCHD Format easier for what I want to do when it comes to using editing software which format is best for PC I need the help I’m trying to choose between which is compatible and will give me both good enough picture for my buget compatibility with my devices thank you for the help in advance

[@sterlingteaches]

@@lady7571 The older models used to cut mp4 every 30 minutes, the really older models would actually stop recording every 30 minutes in mp4. I have a couple of the vixia models and I try to always record in the Mp4 format-- it works easier to edit the quality may be less (I can't tell the difference between the filetypes quality). The Mp4 is a much easier file type to work with. If the cameras do cut the videos into clips it is probably because the files have reached 4 GB, but the camera would have to be in its highest recording setting (if it is less than 35mbs you should be fine). I think the cameras are both comparable--you shouldn't notice a difference in video quality. Both should have 3.5 mm mic plug (size of headphones). If you go to bhphotovideo.com find the two cameras and ask a question you are sure to get a clear answer. I would test it on my cameras but they are locked away as my work is closed for the time being.

[@benjaminsachs8813]

Question. Does the Black Magic Design mini recorder have an included hardware H 264/265 encoder? Thank you.

[@sterlingteaches]

+Benjamin Sachs I don't think it does include an encoder(I could be wrong), I think it just allows the computer to view it. For more money there is an encoder called teradek vidiu which will encode and stream right to the internet, I have tried it and it works pretty well.

[@madedigital]

Could you use a hdmi splitter to get more

[@lanovialatina]

Hi, I need to setup 2 cameras to broadcast to the tv's how will you recommend I do been I only have one input to the computer (thunderbolt) and those this program allow to broadcast to the tv

[@Creativestz]

Does the blackmagic magic also convert input HDMI to analog composite through out rca ?if i have hdmi input and rca out monitoring.

[@sterlingteaches]

I don't think so, I think it only inputs to the computer or outputs from the computer. I don't think it does both simultaneously, but I don't know for sure.

[@andrewmccord6575]

this is all well and good but how do you include audio say from an external sound console. probably not wanting to include the audio feed from the from the cameras in most cases.

[@mikerukwava9574]

Interested too, pliz come and help us on this one. Obviously we don't want our sound to come from the camera direct but an external microphone

[@Jhackmedia]

Hey thanks so much for a great tutorial! Are there any good wireless transmitters that can eliminate having to run long cables? I'm looking to run multiple cameras as basketball games but HDMI cables running all over the gym doesn't sound feasible.

[@BernardOuellet]

+Jeremy Hack Use HDMI Extender over CAT 5e/6 for that.

[@mikerukwava9574]

Yes but costly

[@miesham1011]

Hi! Thank you for this very helpful information. I had a few questions: Does streaming two cameras at a time slow your computer/ the Wirecast Software down, or create any glitches in your Live Stream? Also, do I need any additional gadgets for quality audio? Lastly, am I able to Live Stream for both KZbin and Facebook at the same time? I am trying to set up a live stream for an event that requests live streams for both Facebook and KZbin at the same time. I have two cameras and two BMD mini recorders as mentioned in this video. Any suggestions on how to work this out would be greatly appreciated.

[@sterlingteaches]

Each stream will slow down your computer. But it all depends on your computer's set up (processor, ram etc). It also depends on your video quality, higher quality takes requires a better processor. I have a 2014 really strong Macbookpro with 8GB and an i7 processor and I can have 3-4 cameras work (single stream) without issues, though it pushes the processor to it's limits. The best audio quality would come from a an audio mixer, if your venue has a sound board try to plug directly into that. I usually plug in the audio through the camera (this video shows how I do audio kzbin.info/www/bejne/r6mapHl4isyoj80) You could get an audio mixer that plugs in via USB, but I don't do this so I don't have an exact recommendation. Yes you should be able to stream to both FB and KZbin at the same time in the output settings just make sure to select both youtube and facebook, but you will need a lot of bandwidth. (I have only briefly experimented with dual streams that seems to push my processor and cause hickups) Make sure to connect to the internet via Ethernet not over wif. Search online for streaming bandwidth calculator and it will give you ideas on how much bandwidth you will need. This will also put more strain on your processor. If you have the equipment, I recommend setting it up with private streams ahead of time and try it out before you get to the venue. Hopefully that helps.

[@larrykum5316]

Hi, instead of streaming, can you record video signals from your 3 live camcorders to the hard drive of your laptop? Another word, can you cut live videos instantly on wirecast than burn your video to DVD, Blu Ray or SD card? Does your wire cast software work on Window? Can you give a make, model# of your little black box that connect your camcorder to your laptop. Thanks

[@superstarvideos]

Hi Need lil help im try to found out if i can do live stream with this blackmagic esuing my onwe website ?

[@SpeedSkaterMan]

What output settings do you have the cameras set to? I got an Intensity Shuttle 3.0 but my canon hf r600 and 700 aren't showing a video feed and ive tried playing around with the setting but cant get one that get the video signal through

[@sterlingteaches]

I just have it set to whatever the default is, It is 1080, but I don't know the details. The USB 3.0 doesn't work on all computers. I have used some that it works with and some that have the wrong processor for it to work. Try turning off your computer plugging in the device, plugging in the camera turn the camera on first then the computer. You can try watching this video about adjusting it's settings: kzbin.info/www/bejne/Zoi6eIWwmqiAfq8 If you can't get it to work at all you might contact blackmagic and see what they say.

[@SpeedSkaterMan]

Unfortunately no dice, apparently the canon hf r700 and 600 are some of the only cameras that don't work because the hdmi output is locked at 1080p60 and the devices can only handle 1080p30 max, so you must be some sort of wizard to get three of them working at the same time.

[@adamphilpott3052]

Rookie question: I have just recently started live streaming, and have an increased need for more than two webcams. I have the cameras; but my mac mini cannot "process" (for lack of a better word) any more than two. Before spending the extra cash needed for this equipment, do you think it could accommodate the extra web cams for live streams?

[@sterlingteaches]

+Adam Philpott If it is already struggling to process I don't think adding more would help. If they are USB webcams and you don't need additional converters, I recommend setting up a "private" live stream with all of your cameras, and see what happens, if it works great, but if not then you'd know.

[@AnaFigueira23]

The same set up that you have done in this video using the Mac.. Is it the same thing with a different computer other than a Mac?

[@sterlingteaches]

The software wirecast is for PC or a Mac, but the black magic devices shown don't work as well for a PC. If your DSLR can be seen as a webcam on your PC it would work. I don't use a DSLR, but many do have this feature. You could download a trial of wirecast and see if your DSLR will connect to it. You could even google your model of DSLR and wirecast and see if someone has instructions for it.

[@zacharymcauley6410]

This entire time I've been trying to go in the HDMI out door. Thank you hero. May you always crush your enemies, see them driven before you, and hear the lamentations of their women.

[@sinantolukan]

İs there any way to have 'two different big preview screen' for use of two camera ?

[@jessetrue2956]

Is there a way to do a three camera set up while also running ethernet for better internet connection?

[@sterlingteaches]

It depends on your computer's set up. In this video I'm using a Macbook pro that has 2 Thunderbolt ports and 2 USB ports. You can connect 2 Black Magic mini Recorders to the thunderbolt, and 1 Intensity Shuttle to a USB, then ethernet to Ethernet USB. If your computer doesn't have all those ports (and the ability to support all of those simultaneously you'll have to find another way). If your cameras have SDI output in (different from HDMI) You can use an AJA io 4k, here's a video I made showing how to use that one. kzbin.info/www/bejne/invCf3WQgt2SY5I There might even be a newer technology that would work for it.

[@jessetrue2956]

Cool! Thanks for the quick response! Trying to do a live broadcast on a regular basis and want to make sure we don't have any connection issues. I have all of those same ports as well. I'll look into the ethernet to USB adapter. Thanks so much!

[@sterlingteaches]

I recommend the apple usb to ethernet, In my experience the non apple brands don't seem to work consistently.

[@ChortyWhy]

Are there any cheaper possibilities then the Blackmagic UltraStudio Mini Recorder or the Blackmagic Design Intensity Shuttle Thunderbolt?

[@miningmonkey760]

Excellent video man so simple,.but if I use the gear you just outlined but have an external microphone that needs to get plugged into our house system for our guest speaker, where would I plug that ext mic into? And any brands you recommend? Great video again...

[@PhilToran]

What would you recommend if the cameras are not close to one another? Hard to run HDMi long distances, no?

[@sterlingteaches]

HDMI is very limited on how far you can run it. There are 100' cables made by NewTek www.bhphotovideo.com/c/product/1085185-REG/newtek_fg_000879_r001_tricaster_mini_hdmi_cable.html which worked well to send the signal 100'. Depending on your camera you probably will need a mini HDMI to HDMI connector. I tried other long HDMI cables and these are the only ones that I was able to get to work consistently, but they are poorly made and the connectors on both ends fall off. (I taped the ends so they don't fall off and they work great). The other option is upgrade to cameras that send video via SDI (Canon XA 35 is an example). That greatly increases the distance you can go. I've also used on camera encoders to send a signal by Teradek but they are costly. Hope that helps.

[@darrylephraums4612]

Sterling Teaches what are the on camera encoders you used by Teradek to send a signal without a cable? I am trying to setup a team of three roving camera operators on gimbals, which send their feeds to a capture device like AJA io etc and then into wirecast for switching. Or the feeds could go into an ATEM switcher first. Any thoughts? Thanks sir.

[@sterlingteaches]

Darryl Ephraums I have used the Teradek Cube, but sent the signal directly to wirecast. I haven't used it in some time so I don't remember too many details. But I do remember contacting the company (via phone) and they helped me find a solution to what I needed. Their website has their phone # listed teradek.com/pages/contact-us Try calling them, It worked for me.

[@MattsTechToolBox]

Hello - thank you for the video. Could you tell me specifically what cameras you are using? Would you recommend those or if you were to buy again would you purchase something different? Thank you for your advice in advance.

[@sterlingteaches]

Matt Fuller I use Canon Video Cameras various models, usually I use XA10s (I have other consumer models, but they are no longer made) they work fine. If I were to buy again and had the budget I would go with XA25. I would recommend them they work for my use. I also would recommend contacting a professional camera shop Like BHPhoto in NY and telling them what you want to use the camera for and ask for their recommendation.

[@amazingworld1188]

Hi, I am Robin from IVB7. We have a fantastic equipment which will broadcast 24X7 videos in HD quality and you dont even need to have high internet connection plus you can also broadcast the video simultaneously into your website,multiple social accounts and TV aswell For free demo kindly contact me [e-mail]. With our device you can even stream Live HD video just using your android device.

[@Elbanian]

Do you need to use the BlackMagic Design Mini Recorder or can you go straight to a standard Thunderbolt to HDMI adapter that can be found on Amazon?? Thank you.

[@sterlingteaches]

You will need something that converts the signal. The cables that I have seen that are just adapters from HDMI to Thunderbolt are just cables and don't change the signal at all. Read through the comments of the product that you have found and see if complains about it not working--if so chances are it doesn't work. There are other video converters out there, the mini recorder is one that I found works form me. Make sure to get something that converts signal not just adapts the cable. Hope that helps.

[@Elbanian]

Thank You. I purchased the BlackMagic and WireCast. The only problem now is that the camera isn't coming up as an option in wire cast only my webcam built in the MacBook. Not sure how to fix this.

[@sterlingteaches]

Make sure that you have downloaded the latest drivers from black magic and the settings are set up to HDMI or SDI which ever cable type you are plugging into it. Here is a video with older versions of the software showing how to check the driver settings for black magic devices It looks different now, but hopefully this will help get you in the right direction. kzbin.info/www/bejne/Zoi6eIWwmqiAfq8

[@oinkbastudios3150]

Does KZbin have livestreaming implemented now.. so you don't need to use the Wirecast software?

[@sterlingteaches]

You can livestream to youtube if your camera connects to your computer or from a camera on a phone. The software allows multiple cameras to be connected and switched between for the stream.

[@oinkbastudios3150]

I'm with you.. thanks!

[@kisantv1474]

Very important technology & many many thanks you

[@EdRickerVlogs]

It seems like a pretty economical way of streaming until I saw how much Wirecast costs...$500, for real? Is there a cheaper option similar to Wirecast?

[@matthewf9872]

+Ed Ricker Vlogs I think OBS works. It is a screencast software that supports livestreaming

[@busteraycan]

OBS is great for casual streaming. Only problem I found was it's not as fluent for changing to different cameras. You need to setup a scene for each camera. Other than that, OBS is a lot better because of the plugin library.

[@larsosejohansen]

Burak Baggins But to set up a scene is not hard. With the broadcast mode you get preview and program «monitor». So not hard at all

[@davee6916]

Wow. Thank you for the video. Very informative. Question. Though... am working on a set up that would have to be wireless or at least two cameras wireless the other two wired using a device similar to intensity shuttle. Is there any way to have at least one or two of the cameras wireless.??

[@sterlingteaches]

The cheap way is to use iPads... (it isn't very consistent) this video shows How I used iPads-- not the best option.) kzbin.info/www/bejne/n6TJoKqjgd5sa6M If you have a decent budget, Teradek teradek.com/collections/cube-family makes a bunch of devices for wireless, contact them directly for which device would be best for your scenario. I have called them in the past and found them to be very helpful. Good luck finding a solid wireless solution.

[@DiegoRooks]

dude you explained it perfectly. Thanks Thumbs up!

[@MuzzaHukka]

I wanna do the Mongol Rally (10,000km around the world) through several countries, and I wanna have several cameras in the car, streaming live to the internet via 3G. I wanna have a live stream of where I am driving, how can this be done?

[@munandarmusuk1362]

What is minimun requirement of mac can use for multicam like this?

[@sterlingteaches]

Page 10 on this guide shows the recommended minimum requirements for using the software that I use, Wirecast. www.telestream.net/pdfs/technical/Wirecast-Reviewers-Guide.pdf It also depends on your video quality and how many inputs. Higher the quality the more it uses your computer's resources, more camera inputs uses more of the computer.

[@christopherchristian106]

please tell me that it will work with basic mac book pro model which has Intel Iris Graphics 6100 ???

[@navext]

Hi Do you know if exist another cheaper alternative and regarding the Blackmagic Design UltraStudio Mini Recorder, It's possible used a kind of Thunderbolt hub to avoid pay for two Blackmagic Mini Recorder units ? My mac only have 1 Thunderbolt port and pay for Blackmagic Design Intensity Shuttle Thunderbolt I think is very expensive

[@sterlingteaches]

The mini recorder is the least expensive converter that I have found. I am unaware of others converters that work, I am sure there are some out there.

[@macbelwoldie6201]

What if you wanted to make a presentation while being able to change your screen through a remote control during presentation? is that possible?

[@GardeniaRD]

Please could you list a list of devices used in detail?

[@kamalsinnofilms]

In my part of the world, if you arent using a canon 5d mark 3 or 4 or Sony HDV cameras into sdi or hdmi, nobody hires you. Can it be done with such options instead of the cameras listed in the video or not. Lastly does the intensity work with pc or just Mac? Thanks

[@sterlingteaches]

The intensity works well on Mac and is hit and miss on PC. There is a newer camera input device by magewell that works much better on both PC and Mac. For HDMI www.bhphotovideo.com/c/product/1105735-REG/magewell_xi_100_d_usb_hdmi_one_hd_hdmi_usb.html or for sdi www.bhphotovideo.com/c/product/1350328-REG/magewell_32070_usb_3_0_sdi_capture.html?sts=pi&pim=Y they cost more than the intensity but the ease of use makes them much better in my mind.

[@cristianfebres2121]

what about getting the audio of the camera? it comes from the hdmi too?

[@VA-lj4eb]

Hi, I am trying to use a Canon Vixia HF R700 with the Intensity Shuttle on a Macbook Pro Mid 2012 model, with the latest OSX. Although, the camcorder does not seem to be sending out any video or audio to Wirecast, or any other software that is applicable with the Blackmagicdesign Intensity Shuttle such as Blackmagic Media Express for example. The Intensity Shuttle does function correctly, as I have tested it with both PC, and Mac to determine the USB 3.0 chipset compatibility as some can be slightly different that can cause compatibility issues, but this does not seem to be one of them. I have been able to get the Intensity Shuttle to render audio and video through a Canon EOS 70D, though it doesn't seem to want to work with the camcorder that I have, which seems very similar to the one's you are using for your setup. I am wondering what model's your camcorders are, and if there is a firmware update that may fix the incompatibility issue.

[@79thebest]

OK so lets say I want to use two cameras so i would do this exact same thing. But what I want to do is live-stream a sports event and put the other camera at the other side of the gym and it would not be able to reach the base laptop. What do I do???

[@twisttwist1]

Is there any black magic thing that makes on one single thunderbolt accept several cameras? have 6 slr with hdmi outputs

[@jlotrio]

Depends on what your are trying to achieve, have you looked at the BM ATEM Studio? www.blackmagicdesign.com/products/atemtelevisionstudio

[@broady998]

I'm also looking for something with 3/4 HDMI inputs...

[@smartzpixel]

Hi wanted to ask you what is the best setting you set for the recording ? i got the problem when recording the video got choppy .. pretty bad ..

[@sterlingteaches]

Jikey Wee We usually just stream and record on the cameras for an archive editable copy, I don't have a good recommendation for recording. For streaming, I usually base it off how much bandwidth I have.

[@jkninstitute]

Hi, Can following be used for pcs without a thunderbolt 2 port? Kanex KTU10 - storage / USB3.0 controller - USB 3.0 / eSATA 3Gb/s - Thunderbolt

[@sterlingteaches]

I don't think so, the product that I googled looks like it plugs into a Thunderbolt port. I have not tried something like that, but looking at it, It doesn't look like it would work. There is a product in the video description called a magewell HDMI to USB 3.0 that might work for a PC without thunderbolt 2 port.

[@nondualityone]

Hi there. Any advise on what to use for the audio element

[@trillcosby6310]

+Frank McCaughey ?

[@nondualityone]

+Dave Da Dork HMU??

[@nondualityone]

***** cheers for help!!

[@amazingworld1188]

Hi, I am Robin from IVB7. We have a fantastic equipment which will broadcast 24X7 videos in HD quality and you dont even need to have high internet connection plus you can also broadcast the video simultaneously into your website,multiple social accounts and TV aswell For free demo kindly contact me [e-mail]

[@Thebudadams]

Nice video - I just got the Shuttle (Thunderbolt version) and for some reason, I can't get the HDMI input to show anything - the Mac knows it's there, but black video. I have my HDMI camcorder plugged directly in. Have you experienced any issues? I have the latest version of BlackMagic drivers and I'm on the latest version of OSX...

[@sterlingteaches]

+TheBudAdams, LLC You might have to change the settings on the driver and tell it to have HDMI in not composite or other video in. That is just a guess. Here's a link to a video that kind of shows where you might adjust that. kzbin.info/www/bejne/Zoi6eIWwmqiAfq8

[@Thebudadams]

I got it figured out, thanks - for input I had to make sure my capture was at 1080i 59.94, no other setting worked. And to get to use it as an external preview on Premiere I had to make sure the timeline was 1080i 29.97 as well... a lot of configurations needed for this device - quite tricky for the average user!

[@Akojam1]

Very helpful tutorial Sterling my question how do I put subtitle or the program name, please can you help me thanks

[@sterlingteaches]

It depends on which version of software you are using. In version 5 (older) I create the title in photoshop with transparency (search online how to do that) save it as a PNG Then drag it into wire cast. If you are using a newer version search youtube for adding titles to wirecast # (replace # with the version you are using). I believe that you can click on the plus then a gear icon and choose new title, but I can't remember exactly.

[@ErickB58]

What was your camera set too for streaming? I have a Canon as well but it wants to record to an SD card. Thank you.

[@sterlingteaches]

+Erick Beebe I recommend looking at the camera's manual to see how to have HDMI video play out while the camera is on. Many cameras will allow you to record to SD and send an HDMI Signal out simultaneously.

[@bakingmatters1]

Hi Thanks for this tutorial, brilliant. One (silly )question. Do the cameras being used, have to be identical ?

[@sterlingteaches]

+john royce The Picture looks nicer if they are all the same (as each type of camera processes the image differently , but it can be any camera that sends the signal. I mix brands and types of cameras all the time.

[@bakingmatters1]

Thank you Sterling Teaches for your helpful comments, much appreciated.

[@EmmanuelJosueHasbun]

whats that exact canon model you have on the video it dont matter if is not available

[@sterlingteaches]

Canon VIXIA HF M50

[@JohnnyBoyUploads]

can we connect a camera with hdmi and another with sdi to one mini recorder and use it for a 2 camera setup?

[@sterlingteaches]

No, unfortunately it only does one or the other.

[@LaurenToyota]

does anyone know why AUDIO won't come from my canon 70D to through wirecast? I have hooked it up with HDMI out from camera and into the UltraStudio device. Then thunderbolt out? I tried with an attached mic on my camera and without.

[@sterlingteaches]

Some DSLRs don't send audio out via HDMI. I don't know if this is one of them. I don't have much experience with DSLRs but this forum might have some help : forum.telestream.net/forum/messageview.aspx?catid=44&threadid=12808

[@gameclan5831]

does live streams use internet is you delete it or cancel it

[@JN003]

if you had a 1000 viewers watching your live stream every hour do you know how much data that would use an hour? (for example, if you gave a tour of your house for one hour and you had a total of 1000 users. I'm trying to work out gb per hour cost

[@phantomhacker3417]

I want to stream live services in my church but the only problem is that I am far away from the speaker,what can I do to get the audio sound near for the live stream watchers??

[@sterlingteaches]

Reon Matthee If the church uses a sound mixing board for the speaker, the board should have audio out and if your camera supports audio in (via line or mic plug) you should be able to get the sound directly from the speaker. (you may need a special cable to connect the two. In an auditorium our audio board(mixer) has a red and white circle that say rec out (RCA) and I plug that into the mic (3.5 mm) on my camera and get clear sound. We need to use a Male RCA to Male 3.5mm) cable. It all depends on the audio configuration. If there is a person who runs they sound you may ask them for Audio out, and see what type of cable they give you. if you If your church doesn't use a audio mixing board then you might get a battery powered shotgun microphone. But going through the sound board is your best bet.

[@GWCCOFFICIAL]

QUESTION: I am trying to do live streaming for my church and I am trying to use three cameras. I am using Sparkaco, but after watching your video, I am proposing my church to get "UltraStudio Mini Recorder", but there is any of "UltraStudio Mini Recorder" more than one channel. One UltraStudio but I can plugin more than one camera.

[@sterlingteaches]

+Bhutanese-Nepali Christian Community Church I don't think they make one that brings in multiple cameras, I think you are limited to just one. They make a different device but costs more the atem studio, I have never used it, but I think it brings in multiple video streams (you might have to bring audio in seperately I am not sure) www.blackmagicdesign.com/products/atemtelevisionstudio or if your cameras are SDI you can get a different company's product, www.aja.com/en/products/io-4k I haven't used this either, but was at a trade show and seemed like a nice product. Both are more expensive options. Hope it helps good luck with it.

[@mikerukwava9574]

Use a video mixer my guy then the output from it goes into the UltraStudio, that's all

[@srminshall]

Sterling... I need your help. I want to use a Go Pro connected through BlackMagic to mac and Live Stream using Wirecast...

[@sterlingteaches]

I have only tried using the gopro through blackmagic once a long time ago. You will need a micro hdmi cable to hdmi cable. I used the following cable and it worked www.bestbuy.com/site/insignia-8-hdmi-to-micro-hdmi-cable-black/6392464.p?skuId=6392464 It didn't work plugged into an extender cable, so the limitation is how long the hdmi micro to hdmi cable is. Here are gopro's directions for getting an HDMI out signal: gopro.com/support/articles/best-ways-to-achieve-video-out-signal-via-hdmi I have not found a wireless way to use the go pro as a video feed.

[@yunglittlefoot]

Do you know how to do this on the new macbook with USB-C? There is not adapter that supports thunderbolt and no thunderbolt port on the new macbook

[@sterlingteaches]

+Alexis Littlefoot As USB-C is so new I don't think anyone has made a USB-C to Thunderbolt Adapter, I would recommend waiting until a manufacturer creates a USB-C to Thunderbolt adapter.

[@nochistlanmx4350]

Thank you for the info, just what I needed to learn.

[@RobertCorbell]

can you use the icamera in the computer as another camera

[@sterlingteaches]

+Robert Corbell Yes, You can also plug in web cameras as another camera. As long as your computer's processor can handle it.

[@Houdefinition42Productions]

What's your opinion on the new wirecast gear that came out?

[@sterlingteaches]

I haven't had a chance to try it, but I like the software, and they worked directly with the manufacturers to spec a machine that would support their software. I think it is a good option if it is in your budget.

[@JuanMiguelEspinalJimenez]

Its possible to connect Camera to a Mac using a Connector: HDMI to Thunderbolt? Will the camera be detected by Wirecast? thanks :)

[@KhairulIslam-uk6wk]

hello bro,would you tell me how i make a digital movie by mini video tap recoder.

[@aspire88]

If I am using an older MacPro that does not have thunderbolt (has USB, Firewire and SD card)- is there an HDMI to firewire or USB input device?

[@sterlingteaches]

I don't know about a Firewire connector. There is a USB 3 option by magewell listed in the video description, you might double check that your computer has usb 3 first.

[@abiolaadebayo6981]

can you connect 2 canon VIXIA R700 cameras to this mini recorder or id need two of this ?

[@sterlingteaches]

It only works for 1 camera at a time.

[@abiolaadebayo6981]

would an hdmi splitter let's me connect two cameras with hdmi into my laptop or this converter?

[@sterlingteaches]

There would probably be a pause (or blank screen) when you switched between the cameras as a splitter is almost like unplugging a cable and plugging in a new one. I have not tried it but that is my guess as to what would happen.

[@MichaelHeipel]

What about sound? Does it stream the sound that the cameras capture or do you need an additional audio mixer of some sort?

[@sterlingteaches]

You can choose to have the sound come from one or all the cameras or other audio inputs(mixer) that you have connected to your computer. I usually set up one camera with the sound I like (Plug my mics or sound system into that camera) and have that camera set for the audio on all wirecast shots. (click on the gear and choose the audio input source).

[@stirouify]

T

[@felipeescobedo4684]

nice video, do you know if this setup works with OBS ? i dont know if the obs will recognice the video input. thanks

[@sterlingteaches]

I haven't used it with OBS. I found this video kzbin.info/www/bejne/ppq0pIxrlqmtbpo that uses a program called syphon to make it work with OBS. You might check out that video.

[@sterlingteaches]

I downloaded OBS and plugged it in and it didn't work out of the box. I haven't tried what is shown in video showing syphon to bring in the signal.

[@felipeescobedo4684]

Thank you very much, don't worry, i will look a way.

[@eazye_rio]

hello can i get 2 out like out for projector and Tv like ( i need made 2 camera no need to stream only for get out to projector and Tv and some time recorded it )

[@ricardopulidobenavides6007]

What MacBook are u using, specifications?

[@renatoalvareztv]

¿Captura el audio de la camara?

[@eastafricatotheworld]

How far a cable go before any problems!

[@sterlingteaches]

SDI I have gone 150' no problem. HDMI is limited. I usually keep those under 20 feet. Tricaster makes 100' HDMI cables that have flimsy connections but if you reinforce the hdmi connectors on the end they have worked for me for 100'. www.bhphotovideo.com/c/product/1085185-REG/newtek_fg_000879_r001_tricaster_mini_hdmi_cable.html

[@alzalinda5963]

Thanks for sharing, Can I record the sessions and will it encode to small files like 264?

[@sterlingteaches]

Yes, the software allows you to choose the quality/settings of the recording.

[@tommyhayes5482]

Would it be possible to use an HDMI 3INPUT/1 OUTPUT splitter or switcher to do a three camera shoot?

[@sterlingteaches]

I strongly recommend against it. Possible probably, but it will look really bad. My experience with splitters is that they aren't instant and take time to switch the signal between one HDMI and the other. This may cause a blank video for a few seconds between switching each camera.

[@EstephaniaLeBaron-Rios]

Great video! I have a question, is there a device to use so you can use 3 cameras with only 1 switcher or is this a trade off for the price we will pay for each individual switcher? I know I want to stream 3 camera shoots and I am just wondering if I should buy all three devices ( 2 mini and the USB Black Magic) or get a different one? What is your recommendation?

[@sterlingteaches]

Estephania LeBaron The same company, Black Magic makes a bigger device called a atem studio, www.blackmagicdesign.com/products/atemtelevisionstudio but I think you need a separate device for audio. I haven't tried it. I recommend contacting a reputable retailer like BHPhotoVideo.com and see what they devices/brands they recommend.

[@edgarrivas3890]

Hi, i have a Asus computer laptop that has Thunderbolt, will the black-magic mini recorder work?

[@sterlingteaches]

+Edgar Rivas I've only tried it on Macs, I don't know about it working on an ASUS you might contact the black magic company to find out

[@sterlingteaches]

+Sterling Teaches I realized that I did try the intensity shuttle USB 3.0 on a pc and it didn't work, I don't have a PC with thunderbolt to try.

[@phantomhacker3417]

Hi,(PLEASE ANSWER) when I want to do live video feed in a church service,I need extension cables to run to the Pc,right? And what type of extensions??

[@sterlingteaches]

Reon Matthee You can go as far as your cables will let you. If your cameras have SDI video out you can go much further I think up to a couple hundred feet, if you don't have SDI videos on your camera (check the user manual) then you are limited to the length of HDMI cable that you have. I use a 25' and 50' HDMI cable, I don't know if it will work for lengths longer than that.

[@phantomhacker3417]

Ok thanx!

[@bourzbahraam7]

my Q was (can i Mac be use for live streaming without any more camera?) i found your video clip- i have Canon XHA1 but i dont have cameraman to do all the work for me- can i use my iMac or Macbook pro 13 as a computer and camera for Live Streaming?

[@sterlingteaches]

With an adapter you should be able to connect a canon xha1, I have never used that model, but online it says it has Component and SDI output. The mini recorder by black magic in the video would work for the SDI, or the black magic intensity shuttle should work for component out of the camera. You can contact the manufacturer to be sure.