Thank you NJS for your great videos, will be watching more soon. Sorry I have to add something to this one.. I just spent the last few days stripping steel parts from my 1981 land rover to send for galvanizing. Like in this video I tried paint stripper, but some parts had several coats of paint, rustproofing and filler putty. If anyone watching this finds that paint stripper does not work for filler & rustproofing.. make sure you remove any fire hazards (fuel tanks, solvent cans, etc) use additional protective gear like welding gloves & use a gas blow torch to burn the filler putty, chisel, painters scraper & wire brush - it will save you a lot of time. Don't use blow torch on delicate steel parts or aluminum as they may warp.
@orlandoprklz39292 жыл бұрын
I recommend you use a plastic scrapper. It should be enough and it wont damage your piece :)
@NJSInstructional2 жыл бұрын
Cheers, good tip.
@JayTwizzle6 күн бұрын
Great suggestion!!!!
@David-sw3on Жыл бұрын
Thanks for the Great Video! And some excellent pointers from the comment section also👍😉🇨🇦
@NJSInstructional Жыл бұрын
Glad it was helpful!
@jeffdavies90992 жыл бұрын
I sprayed a metal fire basket with Hammerite spray paint by mistake.Will this stripper remove it.Thanks.
@krausecommercialpainting33593 жыл бұрын
Great video. Thanks for posting.
@NJSInstructional3 жыл бұрын
Thanks for watching!
@theropesofrenovation93523 жыл бұрын
Guess I'll get my wire wheel. I've done the stripper. Thanks for the vid
@NJSInstructional3 жыл бұрын
Cheers
@chrislewis4830 Жыл бұрын
you shouldnt be painting it on you should be stabbing and dabbing it on with the end of the paint brush to ensure a thick coat if you paint it on then your brisles will be wipeing most of it off but thx for taking the time
@consueloetcheverry68682 жыл бұрын
hello! I would like to know if it works to remove varnish and paint on wood! Thank you!
@NJSInstructional2 жыл бұрын
I'm not too sure, I haven't tired it so I can't 100% confirm...
@seanwilliams36342 жыл бұрын
Absolutely bizarre. Today I used the exact same 4 methods trying to strip 4 layers of pain in a metal bench, and I thought let's look at youtube if chemical stripper works.
@David-sw3on Жыл бұрын
Lol...that happened to me on a different tangent once also!😅
@sunshinec.97332 жыл бұрын
I have to remove Black Bull off the barrel of an 1872 Ballard rifle that I assume was applied to preserve blueing. Any suggestions?
@wheretonow31063 жыл бұрын
I'm in California. The crap that is available here, I might as well use my tap water.
@MrPomelo5553 жыл бұрын
😂😂😂
@MurCurieux2 ай бұрын
I am sure there is some gender neutral green solution out there for ya
@wheretonow31062 ай бұрын
@@MurCurieux HaHa California, I get it. Good put down there cowboy. Think of that all by your lonesome?
@gaijinwolfr3436 Жыл бұрын
I am doing the same restoration and this might save me hours
@WaschyNumber13 жыл бұрын
Have you tried acetone 🤔
@corkygidget4 ай бұрын
This is great, but, they don't sell it in the US.
@cptbrncls70502 жыл бұрын
Paint stripper is a new technique for stripping paint off things?
@orlandoprklz39292 жыл бұрын
Nope, its been around for a while already. Its just people dont know it exist such a thing but if you go to school for finishing then its a must to know :)
@every16652 жыл бұрын
It was around in the 1960's and it was not described as "new" back then either. But they have come up with several more "environmentally friendly" types since then.
@diggler2002 Жыл бұрын
I used a drill with a wire brush. Got most of it off.
@jeffreyzie2 жыл бұрын
Thanks for the video. Where’d you find the Poly stripper? I’m trying to find this one in particular but don’t see any stores that sell it Thanks -Jeff
@NJSInstructional2 жыл бұрын
Hi Jeffry, just from the local hardware store. I purchased this from Bunnings.
@jeffreyzie2 жыл бұрын
@@NJSInstructional thanks
@SixtySixteenSix2 жыл бұрын
After stripping paint from the metal, how should I clean up any chemical residue of the paint remover? Just wipe it down with tissue or rinse it off?
@explorer77872 жыл бұрын
Acetone would be the perfect but you probably already figured out and job done since
@orlandoprklz39292 жыл бұрын
Acetone is the solvent you'll need and a brush to remove. good luck
@helenflouch2 жыл бұрын
Metholated spirits.
@markknight6910 Жыл бұрын
Due to the caustic nature, clean up, risk of chemical burns, poisonous fumes and Very high costs for these products... Its much safer and cost effective to find a local shop that does bead/media blasting. With an appointment, you can typically have a part this size back the next day. You can also choose a less or more aggressive finish by deciding what blast material that's used. I tried chemical strip first.. what a mess. Never again
@Catobergcontent3 жыл бұрын
What if we don’t have any paint stripper thing
@XxJaguar223 жыл бұрын
Acetone should work fine, just not as well
@kiimmig2293 Жыл бұрын
I just ran across a video saying break fluid is the best.😮
@tinman2420 Жыл бұрын
if the paint is stuck on so good, why bother stripping in the first place, can’t you just paint over it?
@mannymedia2 жыл бұрын
Sand blaster
@reliefmango68 ай бұрын
Twu💥
@MrSlushy873 жыл бұрын
My paint stripper is even more toxic, it even desolves my gloves in seconds 😁
@KD51LifeofaRacer3 жыл бұрын
What paint stripper do you use? Link?
@MrSlushy873 жыл бұрын
@@KD51LifeofaRacer it is a generic brand from a Swedish home improvement store. I doubt you could get hold of it in the US but if you want to I can look if they still make it.
@Mms_358303 жыл бұрын
avez vous un nom celui ci fonctionnerais sur de l'epoxy?
@MrSlushy873 жыл бұрын
@@Mms_35830 chisel or sand if it is cured. On porous surfaces like wood or concrete you could get lucky to losen it with a paint stripper or acetone before mecanically removing it. For me, and if the work piece allows it, a heat gun has worked best
@Mms_358303 жыл бұрын
@@MrSlushy87 je ne comprend pas tres bien :(
@denvernow72943 жыл бұрын
Better video title: "How to ruin a chisel."
@rottvang2 жыл бұрын
Sand blast with a soft sand
@kareemmunoz60282 жыл бұрын
Where can i do dat
@drewrinker2071 Жыл бұрын
Bet this stuff next to impossible to find now
@nachomoma2469 Жыл бұрын
Try brake fluid
@Prairiedrifter13 жыл бұрын
My pain stripper is so strong that it will eat through 3 pair of gloves in a few seconds
@orlandoprklz39292 жыл бұрын
you need special gloves for the stripper ..the regular ones wont work
@evoxis10583 жыл бұрын
Why ain't that wood split tho?
@bugmouthready5293 жыл бұрын
POISON narrrr
@james-xo8qg5 ай бұрын
this is one of the most useless videos on the internet