How to stud your boots for the winter

[@Sflynn74]

Great tips Billy. And one in return for you: Get some wrist sweatbands and cut a small slit on the inside. Put small heat pads in there on the inside of your wrist. It will heat the blood going into your hand and keep them toasty all day as long as you keep them dry. Worked when I would fish through the ice on Lake Superior down to -30F/-34C.

[@Billyfishing_watch]

Thanks Sean, that's a great idea. I Will definitely give it a go, you ice guys know your stuff. Fish on Brother 👍😁👌

[@ididntdoitkayak3445]

I’ll give that a try as I suffer with cold hands a lot lol. Any tips on keeping your feet warm?

[@Sflynn74]

@@ididntdoitkayak3445 Start with a good quality insulated boot. Spend some dough on good boots; life's too short to suffer shite boots. When it's really cold I use a polypropylene liner sock with a wool-rich outer sock. Both wick moisture so keep your feet dry but if they do get wet they will still insulate, unlike cotton.

[@ididntdoitkayak3445]

@@Sflynn74 I don’t suffer to much when shore fishing, but when I’m on my kayak fishing that’s a different matter 🤣 trying out heated socks but not to happy with them.

[@mr.noneyabidness]

.882 F/C... Sorry, it was a bad math joke.

[@davidb9025]

I've no long had a knee operation with a snapped patella. Would these be okay to use walking the streets in Scotland on ice, to prevent slipping ?

[@susanblair7]

Hi ❤

[@susanblair7]

@davidb9025 hi

[@Billyfishing_watch]

Hi David. they are good for the ice👌

[@HillyRoads]

Thanks for link. Glad you're taking these safety precautions, you fish some super challenging terrain.

[@Billyfishing_watch]

We need all the help we can get! Thanks Brother 😁👌

[@anthonyharrison8584]

Cracking information here Billy,, especially the tyre studs,, they are a fraction of the cost of mainstream Boot Studs . Cheers 👍👍

[@Billyfishing_watch]

Any time Anthony, there is only so much money in your pocket, so a little knowledge goes a long way. Fish on Brother 👍😁

[@simonlightfoot6585]

Hi. great vid. Thanks for the tips. I'm going to get some new boots as my feet get cold in my wellies. I'm fishing Sunday 6am start at Loughor after Flounder and Bass. The Bass have to be catch and release. Think it's going to be a bit cold as the weather is coming from the north ish. Tight lines.

[@Billyfishing_watch]

Have a good match, hope you hook a Bass not a schooly. Fish on Brother 👍😁👌

[@ididntdoitkayak3445]

Great tips and great videos Billy. Will put some of your tips to use next time I get over to Norway fishing again. Tight lines to you

[@Billyfishing_watch]

Thanks Brother, share the knowledge and we'll all catch more fish. Fish on 👍😁👌

[@ididntdoitkayak3445]

@@Billyfishing_watch sent you a message on insta about the studs. Must do more lure fishing next time I’m over. You certainly inspire me to try a bit more after spending 4 hours and nothing, then a nice halibut comes along 👍

[@Billyfishing_watch]

That's the way with halibut, rod hours. If you got one first cast, it would not be so much fun👍

[@aquaholich2051]

Spot on 👌 Billy essential bit of kit to navigate certain marks safely

[@Billyfishing_watch]

Any time Brother 👍😁👌

[@trampster7306]

Brother Billy 'the Stud'! 😁😁 Nice one Billy. Can't access Rock marks so rarely wear boots. Great video though. A mate was talking about the Zippo handwarmers recently - he reckons they are great, and he's so impressed with the one he bought, he's off to get another for the other pocket! Stay safe & well - Dave. 🎣🎣👍👍

[@Billyfishing_watch]

Thanks Trampster, they sound great. But you have to keep fuel in them, so much stuff to remember. I like the chemical ones. Fish on Brother 👍😁👌

[@ciarandunne2741]

Nice one Billy 👍 I do a bit of spinning in west cork every summer and the rocks there can be a mare! Just ordered those studs from China 🤘🏻

[@Billyfishing_watch]

Thanks Ciaran, hope they work out of you. Fish on Brother 👍😁👌

[@michaelbrown-ub6jr]

Another great video Billy well done mate.

[@Billyfishing_watch]

Thanks Michael, hope you can use it some time Brother 👍😊

[@terry32]

The best idea re boot traction ! so , where can I get these little soul savers ? I live in Canada . Thanks so much for doing this video .!

[@Billyfishing_watch]

Hi Terry. You will find them on AliExpress, thanks Brother 👍😁

[@HilarySearle]

Great tips and videos as usual Billy, can you send me the link or website for studs and the tool please, Tight lines.

[@Billyfishing_watch]

Hi bud, Glad you liked it. If you find me on Instagram, I will send you a link. Thanks Brother 👍😁

[@differentfins]

We have studded winter tires for our car, I am sure I could get those studs and tool from any automotive store. Cheers bud and great tip video!

[@Billyfishing_watch]

Any time Brother, glad to help. Fish on 🇨🇦

[@stephenbrown783]

Nice one brother Billy there's no slip ups with that tip 👍 . To stop my hands getting wer and cold I use nitrile gloves with fingerless gloves on top .works well here in SE UK but have to carry some spares . As you said to cold go home..

[@Billyfishing_watch]

That right Stephen, glad you like it. Fishing on Brother 👍😁

[@robertredman7130]

Hi billy, great tip. Could you please send me the link for the studs. Thanks and keep the great video’s coming.

[@Billyfishing_watch]

Hi Robert, yes I will send you the link. Just find me on Instagram or messenger. Thanks Brother 👍😁

[@TheBrambo3]

Hello mate. Enjoying your videos. In planning a trip to bodo in april. Could you send me a link for the studs please

[@Billyfishing_watch]

Sorry but this video is four years old! But you can find these studs on AliExpress or any other Chinese platform. Tight lines 👌

[@TheRiskyDingo]

Awesome! I am going to throw these on a extra pair of combat boots to use in the winter for military training. Was looking for something like this so I don't spend a arm and a leg for yak track styles that would probably destroy my feet running in or flop off as I'm causing maximum friction bounding. My ncos didn't want to try it and I'm gonna chuckle while they flop around everywhere.

[@Billyfishing_watch]

Hi bud, if you need a link, find me on Instagram. Thanks Brother 👍😁

[@marketmade]

Very interesting video billy and good tips 👌🏻

[@Billyfishing_watch]

Thanks Brother, I'm not sure if I answered your question from before, I think it was a for a fishing rod, but I wasn't sure whether it was surfcasting or spinning?

[@dazlee3257]

Nice one Billy I've been wanting studs, the three quarter to high tide range rocks are lethal this time of year 👍 (not a stalker the youtubes keep recommending your videos and always good) 🤣👍

[@Billyfishing_watch]

Thanks Daz, glad to help, Fish on Brother 👍😁

[@bruntpaul1]

Hi Billy, what type are the blue gloves you use? Keep up the great vids 👍.

[@Billyfishing_watch]

Hi Paul. The outer one are made by, kinetic. A budget fishing tackle company from Scandinavia, but I have seen their tackle in Ireland as well. The inside gloves are just common waterproof commercial fishing gloves. Glad you like it Brother, thanks 👍😁

[@craigbaldwin9085]

Hi Billy Another great video keep them coming. Also link for the studs Billy Tight lines brother

[@Billyfishing_watch]

Thanks Craig, contact me on massenger and I'll send you the link Fish on Brother 👍😁

[@Pablo-mp7fp]

Hi Billy, great content. Would you send me a link to the studs please, what a great idea! Cheers Pablo

[@Billyfishing_watch]

No probs Pablo, find me on massenger or Instagram 👍

[@jamess5920]

Great video and advise Billy. Have you got the link for the studs please?

[@Billyfishing_watch]

Thanks James, find me on massenger and I will send you the link. Fish on 👍😁

[@jamess5920]

@@Billyfishing_watch I don't have messenger sorry?

[@dmthomo]

Hi Billy, Ive used the Norwegian Ice racing versions of these studs for years now. Longer than yours, in a pair of Hi-tec boots. They as you say ate brilliant. Ive even been told by other fishermen that studs are more slippery than normal soles…shortly before they fall over. The carbide really foes bite into anything. Can’t wear them in doors, if you do the floors are never quite the same. But very interested in a link to the Chinese equivalent thought. Let me know if you can please. 👍

[@Billyfishing_watch]

Thanks Brother, there are two types of slippy, one is hard sleepy and the other is wet and squishy slippy. Can't predict them both. Find me on messenger and I'll send you a link. Fishing on brother 👍😁

[@dmthomo]

Looks like I’ve been messaging some poor bloke in America thinking its you 🤪 he must think I’m off my trolley. He is called Billy Fishing go figure. The only other billy fishing has no picture. Ill search again. 👍

[@dmthomo]

Got you 🎉

[@ianjames8794]

More top tips Billy. 👍🎣

[@Billyfishing_watch]

Thanks Ian, hope you can use it. Fish on Brother 👍😊

[@patchthesinclair5896]

Thanks Billy, good info!

[@Billyfishing_watch]

Thanks Patch, hope it comes in handy Brother 👍😁

[@darrenmall7963]

Great stuff 👍

[@Billyfishing_watch]

Thanks Darren. Fish on Brother 👍😁👌

[@berryvanzwam3013]

I love Billy fishing the best u tube channel I know 💪🐟🐟🐟💪

[@Billyfishing_watch]

Thanks so much Brerry. Hopefully I will get some fish soon. Fish on Brother 👍😁👌

[@KarlRhodesUK]

Hi Billy, great videos. Keep them coming! About your Viking Icefighter boots, I've bene looking at these for some time, but don't want to spend that much on them until I know they fit, and cant find any locally. How are they around your calf? I have quite thick (19") calfs and cant seem to find a pair that I can get on comfortably.

[@Billyfishing_watch]

Hi Karl, thank you Brother. I have measured mine and they are 18.5, and have no problems. They are fantastic boots well worth the money

[@dave1secondago]

brilliant info billy

[@Billyfishing_watch]

Thanks Dave, hope you can use it Brother 👍😁

[@mattking5242]

What are the dimensions of these studs? Screw length in particular.

[@Billyfishing_watch]

It's all there in the video, thanks Brother 👌

[@TheGsxrstig]

thanks for info

[@Billyfishing_watch]

Any time, Craig. Thanks Brother 👍😁

[@petermorgan8792]

Hi Billy could you send me the link please. Great channel and great vids.

[@Billyfishing_watch]

No probs Peter, just find me on massenger or Instagram 👍😁

[@NYC-pd4ku]

bro I got to say what a great idea great in front of the camera

[@Billyfishing_watch]

Thanks Brother 👍😁👌

[@MrHarry440]

I know this is a Old video. But i would like the link, for those studs and tool.

[@Billyfishing_watch]

Unfortunate buddy, but I don't have a link anymore. But I got them on Ali express, you know what they look like search boot studs. Thanks Brother 😁👌

[@MrHarry440]

@@Billyfishing_watch Thats ok! I know it was a longshot😁 But thanks any Way M8👍I’ll try to find them😁

[@fozman3875]

Brilliant Billy,anyone got a link please.

[@Billyfishing_watch]

No probs Brother, find me on massenger or Instagram 👍😁

[@scoob8254]

you got a link for us please billy, im paying £15 for 30 atm, don tknow if thats cheap or not lol, need to order some more pretty soon

[@Billyfishing_watch]

That cheap, are they the same studs?

[@geef9027]

Simple things like the tyre studs can make the difference between a good days fishing and a bad day in A&E Billy so it makes absolute sense to not take the risk. I'll be a double glover next time I'm exposing myself to the elements. (That didn't come out right}🤣🤣🤣 Thanks for the tips.

[@Billyfishing_watch]

Thanks G men, Share the knowledge and we all catch more fish Brother. Fish on 👍😁👌

[@Kureshiman]

Hi Billy! Can you please recommend a brand? I’m based in finland so I am sure I can find the brand you use.

[@Kureshiman]

Okay, I just reduced the part where you said you got them from china and I can ask for the link. Please, link me! :)

[@Billyfishing_watch]

Hi. follow me on Instagram, and send a DM because I can share link there. Thanks Brother 👍

[@johnmaggiorino4493]

Can I get the link please, thanks 👍

[@Billyfishing_watch]

Yes you can Brother, find me on Instagram or Facebook. And I will send you a link 👍😁

[@garthmicro]

How do I search for you on Facebook Messenger? What are the specs on the studs (how long, etc)? Also, what sort of socket is being used?

[@Billyfishing_watch]

Hi bud. Unfortunately there is no link available for what you need. You will need to go on to AliExpress you've seen the studs and just search for them there. Thanks bud 👍

[@stiansele4895]

hi, where do i buy these stud with tool?

[@Billyfishing_watch]

Hi bud. The tool is sold with the studs, you will find them on AliExpress. thanks Brother 👍😁

[@terencekaye9948]

Hi Biĺly. Is it far too late to get the link for the studs?

[@Billyfishing_watch]

No! But you will find someone AliExpress

[@jayrobert5917]

I do that to my boots to walk on logs, box of screws $5.79 caulked boots, $450.00😂

[@davidb9025]

Where can i buy these ?

[@Billyfishing_watch]

AliExpress 👍

[@geoffdavies2027]

Hi Have you got the link please for studs and studs head holder TIA

[@Billyfishing_watch]

No, this video is years old. You can find some on AliExpress

[@D1982-b3k]

I know the video is 2 year old but is there any chance you could send me a link please thanks

[@Billyfishing_watch]

Sorry buddy! You will find them in AliExpress you know what they look like. Just search for boot studs on their site. Thanks Brother 👍

[@castersfishingwales2038]

🤣🤣Billy the God Brothers Dancing shoes 😂 honestly Peeps have you seen this guy dancing really Dancing 😛😛😘

[@Billyfishing_watch]

You again 🤬I thought I blocked you. Your the guy from Wales with the big lunch box🤣😂.Thanks Matt, fish on Brother 👍😁👌

[@castersfishingwales2038]

@@Billyfishing_watch 🤣🤣🤣

[@gazzwad]

Boomshki!

[@Billyfishing_watch]

Thanks Brother 👍😁👌

[@yvonnemurphy2172]

Thanks Billy!! S'hure you're a stud😅

[@Billyfishing_watch]

Anytime Brother 😁👌

[@gary-dn4uw]

Nice video Billy 🐟👍i pm you on messenger for link for those studs & tool

[@Billyfishing_watch]

No probs Gary, fish on 👍😁

[@jonnywaselectric]

Thanks for sharing mate, I'm super keen to do this. I'd love the link please? I'll send you a message on Instagram I follow you on there Cheers John

[@Billyfishing_watch]

No probs John, glad to help out. Thanks Brother 👍😁

[@Billyfishing_watch]

Hi Jonny did you get the link?

[@jonnywaselectric]

@@Billyfishing_watch hi mate, I didn't get one but I ended up sourcing some from aliexpress. Thank you

[@Billyfishing_watch]

To hat was the link, did you find the tool to put them in?

[@jonnywaselectric]

@@Billyfishing_watch he included a free tool with it yes thank you