How to swap a bmw zf s5d 320z transmission into your volvo 740

[@Chimera6297]

pre-liked the video because I already know it's going to be good

[@fullthrottlemetric]

Would be nice to see where they welded the bell housing on.. pretty critical to have ot spot on . I'm planning on this same swap

[@williamgreer4087]

It's great to see how your builds are going to the next level now 👍

[@IKEACar]

Your channel is the main thing that got me into Volvos I’m on the lookout for one I hope I can find something soon! Keep up the great vids & Volvo gravy

[@sledstorm4703]

Literally watch the previous wagon video I was like "Why isn’t there a new video about the trans?" Refreshed the page and there it is. Awesome

[@unuseableb]

Hol up, you didnt get the 6-speed? I mean sure the 5 is pretty much as durable but keep the newer 6-speed 37dz/bz zf in mind too for future projects. It's gearing match the volvo diffs better for dailying and they are as afforable and even more widely available in Europe than the now old and rare-ish 320z. Im certain the 320z will do for a drift car though as gearing isnt an issue

[@CzMnHD]

Actually 320z has longer 1,2,3,4 gears than 37dz/bz. That means if you put 3.15 rear gear ratio like I did you get a lot better pulls from the line when running high horsepower setup. With 37 you have to try launch from 2 gear and that sucks. So you didnt get the 5 speed? Too bad for you.

[@unuseableb]

@@CzMnHD I have the exact 320z in my e36. Even on that Id like the sixth gear of the gs6 boxes, which plenty of people I know run as the 320zs get rarer. Having driven one in a volvo I cant say I noticed the first being very short on the 37. Also the gasoline version gear ratios are almost identical to the 320z anyways, with only first being slightly shorter at 4.35 ratio vs. 4.21. It may still be a substantial difference for proper dragging chasing tenths, but personally Id prefer the 37 for the 6th gear and better availability.

[@CzMnHD]

@@unuseableb Gasoline version 37 does not have better availability than Diesel. Almost all 37 are diesel versions. Diesel version has very short gears and is bad (need extra adapter bearing for the shaft extension)

[@TheAussieRod]

This is super interesting! Thank you Drifts'n'lifts 👍 Dennis from Sweden, thank you too, mate 🙏 Please film the next conversion. I can't wait to hear your impressions

[@rilagin1]

You are the king of the road sir

[@KABOBkabob]

Also I know full on wrenching vids aren't your style but projects like this would be sick to see in detail with you filming as you go. The summary at the end is still helpful but I feel like there's a lack of good redblock vids out there. Maybe just bc they're simple idk

[@feminazislayer]

I thought the wagon was junk cuz of the frame and body rot ? Then again if this experiment goes well now you know for the next car, which I predict will be coming this fall.

[@10mm]

Everything ZF makes is gold

[@nobodynoone2500]

Everyone says my 240's 5-speed is glass but i've been beating on it nonstop with over 200k. Interested to see what other options are out there if i kill this thing.

[@KABOBkabob]

is it turbo? it can probably handle more NA power but I think where people have issues is with higher boost cars

[@xnpl]

Hi, really nice job, well done! What's the pinion angle of the driveshaft? You used an angle finder, right? Thanks

[@SamuelPuska]

You should change the hose to the slavcylinder to brake pipe instead, that because the original hose expands and you Will loose clutch power. Only a tip but i always do that to my cars😎

[@Jlinwoodjackson]

That is sweet! I have seen places that offer Tremec T5 transmissions.. and those are beefy!

[@ToreDL87]

That'll just about do it! I looked up the transmission and it came in E46 325xi, 330i as well as E53 3.0i X5, all 3 of which I believe N.A received in larger numbers than Scandinavia, shouldn't be too hard to source if you need a new one. Also most deffo spotted longtitudinally oriented bolts further behind aft on the bellhousing, so I think you should be able to make do with just swapping over that part of it to a new transmission if need-be, instead of having to weld a new one.

[@dirtslider1997]

Any bmw trans that bolted to inline 6 would work the same

[@jaceconder3677]

Can't wait to see it rip keeping it coming bro stoked for up coming content

[@kaspars1998]

Why did you choose welding the bellhousing over using an adapter?

[@4soggy]

no companies make an adapter for this trans to b230. can only find tremec t5, cd009, and in sweden a GS637DZ

[@Dasiikopath]

Can we get a 0-60 with the new trans?

[@gert-jandejong1832]

Very nice upgrade!

[@dirtslider1997]

I thought you said the ZF takes atf but ive never heard that before ive always run 75 90w

[@ZHPBrent]

good choice on the zf.

[@troyward8349]

Where can I make a friend in Sweden that can help me out!?

[@KABOBkabob]

i guess you can't do a bellhousing adapter?

[@rsxboss302]

Those driveshaft bolts needs to be grade 10.9 or they’re gonna bend

[@stevensaunders7327]

Can't way to see this hot rod go lol 👍👍👍 fucking awesome chap keep it going

[@Psychedelicbananas]

This looks to me like 260Z from diesel 325tds/525tds not 320z.

[@CzMnHD]

Yeah I have S5D-320Z gearbox and this one on the video is different gearbox. This one looks like its the 310z gearbox that is more common. Its pretty much the same but i've heard 320z is a bit maybe 50-100Nm of torgue stronger. 320z is hard to find from M3 e36 or 328 e36 bmw.

[@KABOBkabob]

bout how much did this run you overall?

[@driftsnlifts]

Just over 2000cad

[@KABOBkabob]

@@driftsnlifts sick that's not bad at all. How many m46/m47s do you think you've gone through before this lol

[@sarina3081]

Good soup

[@samburnham4156]

whats the intro song always wondered??

[@groggers]

the current one is Easy Lover by Phil Colins