How to Swap an Adams Rite Paddle Handing (Professional Locksmithing Advice)

[@GpotterBMX]

What’s cool about you making these kind of videos is because when the day comes that I’m needing to do this, I can hit KZbin and this video will always be here to reference. Good stuff.

[@clksupplies]

💯-PJ

[@firefighter1241]

Another great video PJ. The C-clip will go flying off the rear cam if you’re not careful. You will not find it. Asks me how I know this. Only thing I would change is to point out the what you called one spring is actually two spring one inside the other. Those springs get worn and brake so make sure you have spares. Thanks again for pulling my name this past week on the live. #Lockboss winner. Ps. Send me the Triton so Locksny doesn’t get it. 😉

[@johnteague136]

Good job PJ, thank you, to you and all of the fine folks at CLK supplies.. y’all Rock!!!#lockboss

[@edparadis1578]

Another great instructional video from the real #Lockboss, CLK!

[@Chirael]

Great #lockboss tip PJ, thanks for making and sharing this. Definitely a little more involved than I would have guessed at first, but certainly useful!

[@LORDGREATNESS]

I just had to do one of these today and looked up this video. You saved me a lot of time and effort. #Lockboss

[@stephenzies8867]

WoW Great Educational Video. Thank You ! Rule # 1 Don't Lose The E- Clip

[@Ropa_Redefined]

Great demonstration and execution. I would have certainly thought a right-to-left part would have been needed and exchanged. To my surprise, that was amazingly simple. Thanks PJ and CLK. #Lockboss

[@philherman5209]

Excellent information; thank you, PJ! #Lockboss

[@philhart9800]

I’ve switched them a few years ago, i suggest you have a good memory, or take some pics as you go with your phone. Great refresher for me#lockboss

[@jeffreykelley1071]

Great simple information I have switched those around before yes the springs can jump out on ya it one is not careful. #LOCKBOSS

[@kevenquinlan]

Oddly, CLK seems to be the only good source of instructional locksmithing information. Thanks, I always buy from you when I need stuff. Curious, it looks completely alike, I mean, couldn't you simply install upside down? There is no difference from the top to the bottom, except- if using a key, it would be upside down. I tell people, 'That's how the keyways are in England, just pretend your English'.

[@groverthetoecutter7874]

Great video, had forgot how to change it, nice refresher #lockboss

[@curley6531]

good information pj happy new years to all #lockboss

[@TheDavila10458]

Always a learning experience. I would have figured that out. But your explanation and exhibition doing it, it will make it even easier if and when I have to do it. Thank you PJ. #lockboss

[@venusfly1323]

Great video and good to know this way you don't have to stock a lot of parts. #lockboss

[@clksupplies]

💯-PJ

[@carllewis2207]

That’s a great tip, thanks for sharing! #Lockboss

[@neilletford2645]

Great video

[@neilwilson8742]

As always, good info. Thanks PJ! #lockboss

[@kennethjohnson359]

Thanks for the how to!! Just bought one from clk for a job Saturday. #LOCKBOSS

[@clksupplies]

🤝-PJ

[@NothingPicksLocks]

Been a while since I've caught a video. I like the hardware dives, keep up the good work. #lockboss

[@lockmechanic]

Thanks for these videos, PJ! You guys are always putting out great and helpful content! Btw, WHEN ARE WE GOING TO SEE THE NEW PINNING MAT?! #Lockboss

[@clksupplies]

I hope within 2 weeks

[@breached7288]

Very useful knowledge. Thank you once again for sharing another amazing educational video P.J. #lockboss

[@bobbykendrick2426]

Thanks for the video PJ always full of useful information. Looked like a DeWalt driver taking the screws out. Looks like an upgrade from your Ryobi #Lockboss

[@clksupplies]

That’s a really old (my first) Ryobi drill ! -PJ

[@hro789]

Another good video. Nice to see interesting stuff. #Lockboss

[@GpotterBMX]

Cool! Thanks for the knowledge. #Lockboss

[@josephleonard7880]

totally cool demo super that you can swap it from one side to the other side you don't have stock to much equipment or product. #lockboss

[@kevinbacon9660]

Thanks for the crazy useful video, PJ. I don't work often on these, but that's why I so greatly appreciate these tips. #lockboss

[@clksupplies]

You bet! -PJ

[@rmsg7504]

Nice, thanks. I stock both types but good to know just in case. #lockboss

[@bradleybenson13]

Thanks for information PJ, always appreciate the how to videos. Any reason this couldn’t just be flipped upside down? #lockboss

[@clksupplies]

Technically you could get it to work but the bottom bolt would show -PJ

[@bradleybenson13]

@@clksupplies okay thanks for the explanation

[@leetalar4167]

Good tips as usual. Thanks PJ #lockboss

[@nelsonslocksmithservices8745]

Thanks for the information I have always been the type that learns by seeing it done so your videos really help me out thanks PJ #lockboss

[@shadowmountainlocksmith]

Yesss!! Thanks guys! #Lockboss

[@Daniel_Eaton]

PJ Love the content as always.. Uh oh. Did you move the little allen key timing screw at 2:19? If you don't move it to the other hole, when you reassemble, the tailpiece won't be in a diamond orientation as the driver requires. That'll be a 15-30 minute in-field learning lesson if you needed a video in the first place. Also, the instances of springs getting crushed over time reduce significantly when the bar that acts between the lever and the timing screw is installed with the smoother side against the black knuckle surface. I'd be a #lockboss except I'm too Canadian to be eligible. #mooseknuckles

[@clksupplies]

Hey! Yes, but thanks for mentioning it! Great for ppl to read -PJ

[@locksmithandmore]

Good Video, looked like a different brand then Adams Rite though. All the same concept and good to know how they function even just for servicing. #Lockboss

[@georgeblair7129]

Video is good for when you can't talk your customer out of installing these. If you think regular panic bars get abuse, these get so much abuse everywhere I've ever seen them installed. #LOCKBOSS

[@clksupplies]

Such a true statement!!!! -PJ

[@jeffmoss26]

Well done as always #lockboss

[@Dayman0war]

I love learning videos, thank you for that. What is the tool you used to pop the clip off the cam and put it back on? #Lockboss

[@clksupplies]

The multi pick tool (on our site) -PJ

[@davidturner6509]

You have to watch out for the boing factor on those springs so you don’t lose them…. #LockBoss

[@jeffhudgins9142]

Good info as usual. #Lockboss

[@robertcalkjr.8325]

Thanks, PJ. #lockboss

[@FTRVDenny]

Nice and educational demo. #Lockbox

[@Pyrolock]

More good tips to make you a better #lockboss

[@jamesestep76]

How to swap handing on ADAM’s rite paddle handle. Thanks pj. James estep locksmith co #lockboss#lockboss

[@dougkimber21]

Great video 👍 #lockboss

[@gkeyman565]

#LockBoss, I've never seen one close up, but it looks like you could have just spun the whole paddle housing 180, and flipped that tail piece module 180, so the tail piece remain toward the bottom, or is there a this side up to that paddle housing?

[@firefighter1241]

Can’t just be flipped. The pins that hold the back cam orientation only go one way.

[@vernondollhopf3249]

Glad to see this #lockboss

[@NateGodin77]

Good stuff! #lockboss

[@polarbear7334]

I loved the video, #Lockboss

[@16dingo_]

Simple enough. #Lockboss

[@securetechlocksmithco.7383]

Nice info #Lockboss

[@dadedubbledee]

Awesome #LOCKBOSS

[@mikes7471]

Sweet ..... #lockboss

[@chrisdonaldson5505]

Just like that #lockboss

[@yochihop8100]

Nice #lockboos

[@curtolocknkey]

I’ll switch it if this #Lockboss don’t get a paddling…

[@clksupplies]

Lol -PJ

[@evilarchconservative2952]

🐻‍❄️🍭 #lockboss

[@edkeel5007]

Good info as always.#Lockboss