How to tap down a dent | Knocking down high spot | Tap down tutorial

Tap down a dent or knocking down a high spot is another very important thing when it comes to learning PDR.
In this tap down tutorial I will show you how you can learn taping down all this high spots. This is another one of my beginner PDR series about PDR learning.
Watch other videos as well if you want to learn PDR or you like anything PDR related stuff as I am releasing all different type of PDR content.
The video I have mentioned in the video about how to see the dent included here in this one:
• PDR Training: How to f...
Thank you for watching and please like, share and subscribe to get more great PDR related content.
Best PDR training:
bestpdrtraining.com/
#pdr #dentrepair #pdrtraining

[@dpilotnyc7621]

Best into breakdown I’ve seen on any subject, not just PDR. Great job on this video bro

[@vidicz]

I appreciate that!

[@akisvezircoglu5560]

I Learned so many things in just ten minutes. Thanks a lot, you're great. Greetings from Greece.

[@vidicz]

Hei thank you for watching :)

[@robbrown6495]

Without a doubt the best tap down demo I've seen. I've got a dozen dents on my car and I'm about to see how difficult PDR is. I feel much more confident on tapping down having watched this video.

[@vidicz]

Good luck. It’s not as easy as it looks I can tell you that 😌

[@archieclode]

Это очень сложно

[@smody121]

While i did find this excellent tutorial, as a new car DIY guy, i didnt know the name of this method so it was very awkward to search. Luckily the algo came through with this suggestion...

[@MaverickUltimateTop10]

Lol as obvious as it was I had the same issue 😂

[@vidicz]

Glad the algo helped :) I have no idea how else to name it to be more new diy person friendly. Any ideas?

[@musichead4555]

Hey man that last tip you give was a life saver, totaly save the job👍👍🤘

[@vidicz]

You are welcome 👍👊🏻

[@frankpetrie8389]

Thank you Zan. You really helped me get started on learning how to use those tools.

[@vidicz]

You are welcome Frank. If you have any questions feel free to reach out!

[@yakhunt9424]

Pure skill and so satisfying to watch

[@vidicz]

Thank you so much! Much appreciated

[@Fadeetherouge]

Keep up the beginners guides please, amazing content and super helpful. Also hello from Canada 🇨🇦

[@vidicz]

Hi Dave. It’s hard to keep coming out with beginner guides. I do try to include useful information on every video though 👍 Greetings to Canada! 👍

[@jasonswift8918]

Great video. I saw everything from A to B and it wasn't boring. I'm a subscriber.

[@vidicz]

Thanks Jason. Some of my videos might get boring from time to time but I try to keep them entertaining 😊 any questions let me know 👍👊🏻

[@rossmcfadzean8565]

Great video! Been watching loads lately and came across your channel tonight, Subscribed!!

[@vidicz]

Thanks Ross. Hope it helps!

[@gimne]

Thanks man, I partially started doing pdr on my car door after the corner of the door got bent, was able to bend it back but now I have a crown and just finishing it up. First time doing it.

[@vidicz]

You are welcome. Good luck with your learning process.

[@danflowers8584]

Dude...awesome explanation and demonstration. You are a great teacher and technician. Thank you. Subscribed to your channel and excited to learn more from you.

[@vidicz]

Thank you Dan. Glad I can help!

[@c.andrewits2774]

tap down is a critical skill, i learned since my first few repairs i actually had a few little spots i puushed up, cant be scared to tap down after :) just create little dents basically but push back out after.

[@vidicz]

You are right. Tapping down is as important as pushing up!

[@PatriciaWilliams-ut8jq]

😢😢😢😢😢😢😢🎉🎉😢🎉🎉🎉🎉😢😢😢😢🎉🎉55😢😢😢😮😢😢😅😮😢😢😮😢😮😅 9:47 9:47

[@PatriciaWilliams-ut8jq]

😢😢😢😢😢😢😢🎉🎉😢🎉🎉🎉🎉😢😢😢😢🎉🎉55😢😢😢😮😢😢😅😮😢😢😮😢😮😅 9:47 9:47

[@westporter1]

Great informative video. Nice of you to share your knowledge.

[@vidicz]

You are welcome 👍

[@billseay6399]

Hey thanks Loving it big guy

[@vidicz]

Any time!

[@davehayden1282]

Great video. Thank you!

[@vidicz]

Thank you Dave.

[@gergemall]

Learned much . Thank you

[@vidicz]

You are welcome 👍

[@CVM222VOLT]

You make it looks so easy.

[@vidicz]

Thanks. I try.

[@andyeve8]

Amazing video. Thank you.

[@vidicz]

You are welcome Andy👍🏻

[@gordonturner8544]

thanks very helpful! youre making that look a lot easier than it actually is but very good tips ta

[@vidicz]

Thanks Gordon. Glad I was able to help 👍

[@rendellbaldwin8946]

Best tutorials I've came across. Big 👍

[@vidicz]

Thank you Rendell!

[@ktun1]

Best tutorial ever 🤝 thank you.

[@vidicz]

@@ktun1 thank you buddy 👍

[@rinzler9775]

Really clear video of the detail.

[@vidicz]

Thank you!

[@gourmet53]

Great video dude. Great camera angle to watch the process.....Thank You

[@vidicz]

Thanks. Glad it was enjoyable! :)

[@tomkkilincer3567]

Great...good job...described clearly

[@vidicz]

Thank you Tom.

[@thomasr4470]

My favorite tap down is the red weighted tap down from Black Plague PDR and I use a few different tips from Edgy tools. Love the video bro!

[@vidicz]

Thank you. Edgy and Black Plague have quality products for sure! 👍👍

[@nawarhasson1017]

Mate you awesome learned alot of you thank you for your videos

[@vidicz]

You are welcome Nawar. Thanks for watching.

[@kimhenrik1975]

great post,thank you !

[@vidicz]

Thank you. Hope it helps!

[@thomasleebrown3136]

Good information; thank You .

[@vidicz]

You are welcome 👍

[@allenwilson6585]

finally a use for my black gliston glue sticks.! Awesome video!

[@vidicz]

Thanks Allen.

[@jejejei274]

Best explanation of pdr tap down ever❤🎉

[@vidicz]

Thank you!

[@AlfredoHernandez-fh5fk]

Love the way you make it look so easy great job 👏

[@vidicz]

Thank you Alfredo!

[@bernardkelly8898]

2022 5th Dec 2022 Hi can I have the same line but inverted Meaning there is reverse. It is on my Bentley 2017 Front wing , I rubbed along a piece of wood in my garage , just above the wheel arch. Can you pls suggest correct procedure, Thks

[@bernardkelly8898]

Sorry not to mention it is the line at your 7.20 min video

[@frankgomezjr7520]

Freaking awesome video bro thank you and I just subscribed 🎉

[@vidicz]

Thanks for the sub!

[@kennethcochran1556]

Extremely cool I have a 2019 ford ranger and I put a dent in the back door with my shoulder trying to rock the truck because my door was stuck on a cabinet in my garage so now I’m going to try to fix it myself after watching your video you know they just don’t put the metal in these cars like they used to

[@vidicz]

Yes metal is much thiner these days then it used to be. However I must warn you that fixing dents is much harder then it looks so be careful as you can make it worse and harder for someone to repair it later

[@dragantanevski6013]

Great tutorial Zan

[@vidicz]

Thanks buddy :)

[@m.d.1473]

Nice video. Thanks!

[@vidicz]

Thank you for watching.

[@eddy.F-63]

Grande video. spiegato molto bene grazie, Great video you are a fantastic teacher thanks from italy

[@vidicz]

Thank you buddy

[@toonybrain]

Love the glue stick tip. Thank you.

[@vidicz]

You are very welcome! :)

[@vadymkhomenko4629]

Thank yoy! Very usefull.

[@vidicz]

You are welcome!

[@sureshlingabathina]

Excellent

[@vidicz]

You are welcome! Thanks for watching!

[@NasirKhan-io6nx]

Best lesson

[@vidicz]

Thank you

[@pdr-original]

Hi!! If you have a high spot and a sharp one, you can knock it down and at the same time press and hold it from the inside with a plastic ball !!! The result is easier! Good video!!! PDR is art!!

[@vidicz]

Hei. Thanks for the advice!

[@AlfredoHernandez-fh5fk]

Brilliant technique love it hope one day to become as you 👍🏽

[@vidicz]

Thank you! I just fix dents buddy!

[@brothertoughlove]

Great video 👍🏿

[@vidicz]

Thank you!

[@alexiecolon3441]

Good work 👍🏼

[@vidicz]

Thank you 🙏

[@markdukakus7024]

i love this trade

[@vidicz]

Me too. It is a great trade

[@tompongrac8952]

Thanks, you make it look easy! I thought you use a blending hammer after knock down based on your hail storm videos, but from this looks like no need

[@vidicz]

Thomas Pongrac blending hammer comes in to play on rails and occasionally on other side panels. I never use it on top panels

[@tompongrac8952]

@@vidicz ahh thanks, I never knew. I'll try this out as soon as my PDR light arrives

[@vidicz]

Thomas Pongrac cool. Let me know if you need any help 👍

[@tompongrac8952]

@@vidicz thanks bro 👍🏿

[@frankzito1]

Can’t seem to get mine down. Might have to hit a bit harder lol thanks for the nice tutorial

[@vidicz]

No problem 👍 gradually add force until you see it moving

[@dimosthenismandilas6893]

Great demonstration!! Thanks for helping us !!!

[@vidicz]

You are welcome. Thanks for watching

[@qamarzaman4274]

Nice information

[@vidicz]

Thank you much appreciated!

[@stephenthomas1821]

Thank you

[@vidicz]

You are welcome. Thank you for watching

[@gersonjesusdelreygutierrez3700]

Gracias, haces parecer lo difícil fácil

[@vidicz]

Thank you

[@yoorynt5590]

WOW--- Amazing man. , Great. How could you do such thing , surely not easy as looks. Thank you for share how to do it perfectly. Jakarta-Indonesia learn from you.

[@vidicz]

Thanks buddy. Greetings to Jakarta!

[@harunozdogan8023]

Greetings from Turkey. I discovered your awesome videos channel. I am a teacher in Turkey. I love these jobs and I am interested. Great explanation thanks.

[@vidicz]

Thank you Harun. Greetings to Turkey

[@harunozdogan8023]

@@vidicz Is it hard to learn this job? I have very good dexterity. In my country, you can earn a lot of money from this business. I trust myself on this topic. But I have no experience. Where would you recommend starting? If I were close, I would definitely like to learn from you.

[@sammysteele432]

this is the most informative video on the subject i have seen so far thank you. however you may want to work on your mic and music volume settings i had to turn my speakers up to 60 to hear you when everything else i listen to on 20 and at that volume the music was a bit on the loud side...lol but otherwise a great video

[@vidicz]

Yes I know about the sound issue. I think I got better in time with it :) thanks for watching and the feedback 👍👊🏻

[@Dragon-Slay3r]

Make sure the tap is thin regards End of days 2020 mashup

[@milanstojkovic7705]

Dobar video.

[@vidicz]

Puno hvala!

[@Triumph1968]

Great video, I learned allot. thank you. Maybe you can lower the intro sound, which is way louder than the video itself.

[@vidicz]

Thanks for the suggestion Michel!

[@user-cd4zj1xq5w]

muchas gracias

[@vidicz]

No problem

[@MrRiderHD]

Odlican video,hoce li biti jos ovakvih?imam zelju da naucim oko PDR i do sad ti si najbolje objasnio.

[@vidicz]

Hvala. Imam jih više na youtubu

[@mouslarb6976]

Nice

[@vidicz]

Thanks

[@lohikarhu734]

When you are tapping, it would really help us beginners if we could see how hard you are hitting the tool, to get some feel for how gentle, or hard, one should be....so far in the video (tapping down the sharp little bumps), I haven't seen the method of opening up a dent, to make it better to glue pull...

[@vidicz]

I would recommend always start with gentle then add more force if nothing happens.

[@StatikFeedBacK]

Thanks

[@vidicz]

You are welcome

[@vistron888]

I bought a PDR kit years ago. I tried pushing out a dent but it wouldn't move one bit. After that I got kind of deflated. I never intended to make it a career but just wanted to accomplish it for my own satisfaction. I do still watch a lot of PDR videos on youtube just for the enjoyment but this video is the only one I've seen where you get close up detail of what is going on. Credit to you for that. Maybe I'll go back when the weather is better and try again. Subscribed.

[@vidicz]

It sure looks much easier then it really is. A lot is also about the tools you have. Anyways thanks for subscribing and if you will have any questions when you go back at it feel free to ask.

[@christiansustrina5672]

VT don't give up. Keep practicing you'll be a master one day!

[@vistron888]

@@christiansustrina5672 Cheers mate.

[@leebigcatasitis]

I,m confused with the two main types of pdr boards , fog vs line board, i have both but not sure which one to use , i pull to paint at the moment because i can,t finish the micro high and low spots but very keen o learn, many thanks Mr Zan, lee U.K . good day

[@vidicz]

Hei Lee. I prefer fog over lines, but its what you are used too

[@marklewis3134]

Could you do a tutorial on light board positioning please

[@vidicz]

Great idea. I will keep it in mind when I get back to working

[@RefurbishYourCar]

Can you do a video of tapping down the crown first before you pull out a dent please

[@vidicz]

Good idea. I will keep it in mind and next time I have a repair like that I will record it

[@BarneyWobba]

You make it look so easy :(

[@vidicz]

With a lot if practice and right guidance everyone can make it look easy :)

[@christiansustrina5672]

Do you have a link on what tools you used? I cannot find good tools to do PDR with. Amazing video!

[@vidicz]

Hi Christian. Where do you live?

[@RobertMirzakhanian]

wondering where is a good point on the crown to start tapping down. in the middle or the edges f the crown and how hard to tap.. appriciate the help..And thank you for all of the info.

[@vidicz]

Hi Robert. Sorry for the late reply. I always start tapping down the crown from the sides.

[@boboboesje5424]

Started 6 months ago with a 4 day of pdr training, using only the white knock down with the magnet at the moment. Ordered a ATP knock down hammer to try. I like your video's man hope one day i become also good pdr guy. Ps: how do you ''clean'' the tip of the knock down? mine is making scratchs

[@vidicz]

You will get there! It took me 1 year to be able to fix a car...acceptable quality and slow pace. Having a 1 on 1 training can greatly speed you up. You can clean the tip by using some sanding paper like 1500 and then 3000 and buffing it afterwards.

[@boboboesje5424]

@@vidicz Thank you i will try. I practise every day 1 hour after my work, most of the dents are almost not vissible if i sand it a little and buffing it up

[@bobanmilisavljevic7857]

If you had perfect access to a dent from the back of the panel or from inside the car, would you tap it down from the inside or still massage it out with a rod?

[@vidicz]

I would push it (massage it) with a rod. Some people do tap it out from inside the car. Most commonly is this technique used by Brazilians.

[@JDLC4]

Hi Zan. I have used a glue gun to pull out some dents I had from walnuts but now I have raised dents on the top of my car. Would I need to use larger tips for these dents? And more force when hammering since they're a good size?

[@vidicz]

Do the dents look like a volcano now?

[@tuftwrld]

@@vidicz yes on my hood

[@charlesbass4651]

what tips were you using? what kind of hammer do you use? why did you change tips and what were the tips made of?

[@vidicz]

I am using dead on dent tool tips. A hammer is something light, nothing special. A paddle would do just fine! I change tips because different size gives different result.

[@Mike-go5pg]

Last week my van was hit with hail and the insurance paid me a lot of money to get it fixed, so instead I bought a few pdr kits and working on the dents myself and already got paid to take my time and learn how to make these dents go away. This video really helped. I have used hot glue tabs to get the major dent out and now I have a smaller but still noticeable indent and I am going to try to knock down the crown around the edges and see if that takes the tension off the metal

[@vidicz]

Great. Glad that you were able to make them go away and glad that my video helped.

[@markanthonydojoles3891]

Do u heat up the panel to make it malleable before you tap down? thanks!

[@vidicz]

Hi Mark. I never heat the panel to do a tapdown.

[@staskras1694]

Hello, wich brand knockdowns and tips are you using in this video ? Thanks

[@vidicz]

I am using the firing pin and peewee from dead on dent tools

[@staskras1694]

@@vidicz thank you Zan, your jobs and videos is great

[@kevinhintz1903]

Excellent video! I see you prefer fog over a line board, why is that?

[@vidicz]

Fog is preferred in the industry and I learned on fog

[@straightlines7432]

Good work. I would like to see you do a deep door ding repair showing the tool tips, etc . Did you win at mte competition? Thanks

[@vidicz]

Thanks. Yes I won the recent Orlando MTE competitions and the PDR World Cup.

[@vidicz]

kzbin.info/www/bejne/lXTMY3lvbpaBiaM Something like this?

[@straightlines7432]

No I was talking about a deep.ding over stretched showing the tools and your technic Thanks

[@straightlines7432]

On a flat panel

[@aymanhusein7277]

What is the name of the device that you use at the beginning of the video, the dent puller, but air

[@vidicz]

Hi. It's not pulling the dent out but it's making the dent if you mean the one in the intro?

[@reza_dc2]

I created a few lo's with the tap down.. Hitting it to hard I'm assuming.. Great Video ~

[@vidicz]

Yes. You are hitting to hard. Push the low spots now.

[@reza_dc2]

@@vidicz Will do , thanks for the heads up. Do you think a wider , more flat surface tip is safer for a rookie in pdr ; compared to a pointed knock down tip?

[@vidicz]

@@reza_dc2 the wider the high spot is, the wider the tap down should be 👍

[@MrNickstevenson63]

Your information is excellent but you don’t need the background music. It makes it a difficult watch

[@vidicz]

Thank you for your input. I guess when trying to teach the background music is too much

[@jnvc7270]

Brilliant. How hard are you hitting the tap with the hammer?

[@vidicz]

Thank you. It all depends on what you need to tap down, but start with less force and add as needed

[@jnvc7270]

@@vidicz Thank you. 👍

[@badjazz271]

Who makes the tap down that you were using? Thanks

[@vidicz]

The tip itself is from Dead on dent tools. The carbon tapdown is from Druz toolz

[@alexsandrgal149]

To hammer with a stick of glue, this is familiar to me. One person in Lithuania, then showed me.

[@vidicz]

Of course :) Kaz itself :)

[@dimetionize]

Hi, what is the tap down tool brand. Do you have a link to purchase it? Thanks

[@vidicz]

The tapdowns are Dead on dent tools and are sold by Anson.

[@littlewing2357]

Where do you get, or what tool are you using to tap down? Thanks

[@vidicz]

Any PDR tools store should have tapdowns.

[@chilimax21]

What hammer did you use? Also when would you use a hammer vs. paddle? Thanks

[@vidicz]

I have a hammer I am used to…it’s basically a hammer for tiles :) works good for me

[@vidicz]

Oh and Paddles are also good…its about what you get used to

[@bojanXXL]

Hello. Which tip do you use 3:50 and which at 6:02?

[@vidicz]

First one is called the peewee from dead on dent tools and the second one is from the VIP Tools. Don’t know how is called exactly

[@bojanXXL]

@@vidicz Thank you Zan, but for now this PeeWee tip is sold out at all shops

[@pawelkapica5363]

Do you always pre-warm your surface with a hot air gun? Will I ruin the paint if I don't do that? I have a dent in my door and want to try this for the first time....

[@vidicz]

Hi. No I preheat only on really sharp dents. If you have a more valuable car I wouldn’t recommend doing it by yourself...if you want to learn the trade then get some of the tools that are worth your money and start practicing on scrap metal panels 👍

[@pawelkapica5363]

@@vidicz It's just a10 year old fiat 500 ;)

[@vidicz]

I like fiat 500 :)

[@pawelkapica5363]

@@vidicz Yeah it's fun to drive and I am a tall guy. Ok but now in the kinda freezing temperatures its still probably not a good idea to do it right? THe dent isnt that sharp but goes on half of the passender door. Swiped a post :P

[@vidicz]

I mean if you just want to try to save your money then don’t :) you will end up messing it up and spending more at the end. It’s much harder then it looks :) If you want to actually learn to do PDR then I suggest getting a scrap panel :) save your doors for later :)

[@randydicotti3975]

I tried this on the exact same kind of dents at 3:47, not sure why but could not get the dent back down. Middle of sliding door. After over an hour, the dent was still raised, but the entire area sunk low still with the dent in the middle. 2006 Dodge Caravan. Maybe the New reinforced Steel I've heard of?

[@vidicz]

Was it maybe a brace underneath and it was pushing it up all the time?

[@johncrossley2150]

Tapping down a crown with a glue stick is killer tip. I watched videos for a week. Got the terms tools and some techniques. I watched 3 hrs a day. I have a large scrap sheet metal pile including hail damage hoods. I am having huge problems with this. I can’t give up. What do I do next. Thanx Johnc

[@vidicz]

Sorry for late reply. I had knee surgery and was recovering. What are you having problems with?

[@johncrossley2150]

@@vidicz hope all is well. Thank you for taking time to reply. I hope your knee is ok. It takes a wile to recover for sure. I have taken some time off. I started to struggle and struggle. I have put it to the side for now wile my Bodyshop business is very busy now this time of year. Thanx again Zan. Take care. Johnc

[@vidicz]

@@johncrossley2150 no worries. Glad to hear bodyshop is busy and running 👍 If you get back to it feel free to ask if you need help 👍

[@galiever]

what tool you are using Sir? and where to buy that?

[@vidicz]

Its a tapdown tool which you can buy in any of PDR tool stores around the world

[@stevengitahi3806]

Hi I need some step downs can you organize for me please am in Kenya and it's difficult to get them here, will appreciate.

[@vidicz]

Hi Steven. You best way would be to order them online

[@joephon3359]

Nice Im learning pdr and every time I push out a dent it seems like I make a crease my 2nd week training

[@vidicz]

Good luck on learning PDR. You need to start cross checking to get rid of those little creases. They are normal, you just need to get rid of them

[@benparkes5939]

Makes it look so so easy 🥹

[@vidicz]

Thanks Ben!

[@E.v.g.e.n.]

👦👌🔥

[@vidicz]

Thank you

[@harpo7226]

I remember father ted doing this😂😂😂😂😂

[@vidicz]

hahahah yes he did a number on it

[@peppedpd]

Thanks for the very best videos. But please, please, skip the "music". Please.

[@vidicz]

Without the music it would be boring and dull to watch. I am sorry if you dont like my selection of music, but in that case you can always mute.

[@peppedpd]

@@vidicz I promise, most people looking at this is interested of what you are doing, and the sound of what is happening could help to understand and also give a good feeling of what is happening. No, nothing dull in your exellent videos. Just interesting. Thanks again.

[@ricktemple6469]

DO YOU HEAT THE METAL WHEN DOING THIS ?

[@vidicz]

Hi Rick. No need to heat the metal when taping down the smaller stuff.

[@saulruiz9467]

Any site for a pdr kit? That doesn’t break the bank?

[@vidicz]

Check out my 1000$ challenge video. That’s for A1, I will have other 1000$ challenge videos coming out

[@user-oo8wf3tq4t]

Hello i need like this stuff what way i got

[@vidicz]

Best to order online in some PDR store