How to terminate KNX Cables into an electrical panel

[@Yetimon]

Thanks, I didn't know those 8-way DIN connectors existed. I'm asking my supplier for them now :)

[@PoseidwnTech]

You are welcome! Thank you for your comment!

[@francescolongobardi8291]

Great content!! I really enjoy your videos about KNX, it's a very powerful system and it should be spread more. It would be very interesting to see a video showing a real system, to understand how and where all the components are mounted.

[@PoseidwnTech]

It is in our plans to make such a video. Thank you for your comment!

[@michcritch3824]

Great stuff!

[@DmitriNesteruk]

Phoenix Contact make KNX-specific terminal blocks that can be bridged.

[@pietermech]

Personally I rather use "phoenix PTFIX 6/6X2,5". Since they have the option to easily take out a wire. They are also din mountable and in different colours available. But thanks for your great video! ;)

[@PoseidwnTech]

Thank you for sharing that and for your comment! I will give it a try!

[@Electrical_decorations]

شكرا ❤

[@PoseidwnTech]

You are welcome!

[@catalinIntimidatorul]

Nice work! But I have a question! How do you connect white and yellow wires? You conected only red and black...

[@PoseidwnTech]

Thanks! In Wago connector, I terminated both the red-black and yellow-white wires, although I didn't actually need them in this installation. The reason I do that in every installation is to be prepared. For example, when I have a KNX device that requires additional auxiliary power through the yellow-white wires, I'm already set.

[@dsmviper]

Spectacular video tutorial, preciate👏🏽👏🏽👏🏽

[@PoseidwnTech]

Thank you!

[@egfdevos]

Cable cores should never ever come in contact with the 230V wires. > = 4mm clearance space. Also do not remove more sheath from the cable then needed. This would not pas an inspection.

[@PoseidwnTech]

Thank you for your feedback. If you have any additional info or best practises please share them.

[@yousefr433]

1:30 , if i wanted, i can connect the cables directly to the actuators, right ?

[@kamrannazari3481]

Where can you download a map of wiring and how to wire a building with different equipment

[@PoseidwnTech]

What do you mean a map of wiring? Normally before installing the KNX devices there is a KNX study that must be followed.

[@antonismallidis6461]

Great video , where did you find those wago products ?

[@PoseidwnTech]

Thank you for your comment! In Greece we buy Wago products from Dimoulas : www.dimoulas.eu/klemmes-bysmata/caps/mounting-carrier-for-6-connectors-243-series-for-din-35-rail-mounting-screw-mounting-orange/

[@okikrisna8619]

anyone can sent me the basic Instalation of KNX because my vendor Disepier

[@nikosvaidis5397]

Μήπως δε θα έπρεπε να κόψεις τα συρματάκια γείωσης των πράσινων καλωδίων αλλά να τα γειώσεις σε μια μπάρα;

[@maxking3]

KNX Wires are not to be „earthed“ at either side.