How to test Shark IQ cliff sensors Error number 7

Want to give a thanks to lskywalker6 for the info.

[@gahvno]

Okay, I found something that absolutely one-hundred-percent fixed my Error 7 issues. After checking all of the sensors and making sure that there was nothing obvious wrong with my Shark IQ, I simply deleted the current map. It was behaving as if it was sitting on a cliff or a drop when it was several feet from one and I wondered if it had become confused and the map was corrupted. After deleting the map I told it to start all over from scratch and it has been working like a charm. Just like brand new. It worked for me so if you don't have any bad sensors or anything else physically wrong with your vacuum, give it a try. You might be as fortunate as I was.

[@_rebzy3194]

Mine keeps saying too close to a cliff please reposition I am I even resetted it and I cleaned it all and it keeps saying it 😭 I don't even know what to do??

[@ashleyf2470]

Is there a way to bypass the cliff sensor? If so, can you show us how? After an hour on customer service with shark, I’ve learned my shark is a brick because of error 7 and there are no replacement sensors. The machine can function just fine if I can get the cliff sensor figured out.

[@TheRobertThornton]

I successfully replaced the cliff sensors in my shark vacuum but now it can't find the dock. It tries to go in front firstr instead of backwards. What did i do that could cause this?

[@mld958]

May you please go over how to replace the cliff sensors? I don't see the lights on one of the left front & side.

[@mattsteinkopf6364]

my shark IQ got into dog poo, cleaned everything down to the frame, unit was completely a part. now I get the error #7. I think the sensors are specific and I could have put them in the wrong location. How can I tell which sensor goes where?

[@TheBobpro]

Do you fix Shark IQs?

[@ghost_ship_supreme]

You have a dragonfly on your wall

[@lawtube5434]

The problem of abnormal ground inspection

[@vanessa12342able]

Can u please help me. Mine would charge and everything is good but when I hit to work , it stops and it wants me to clean it but it’s already clean ? Can you tell if it’s a sensor? Please advise. Thank you .

[@19bassman70]

My Shark RV761 will stop working and say that the dust bin is not in the Shark. It is! Enjoyed your video! Thanks

[@E85_STI]

I tested my cliff sensors with a multimeter before I bought replacements and I’m glad I did because the multimeter confirmed the leds for both the transmit and receive were both good regardless of the light test with the camera. The board does have a small black spot on the connector so I’m guessing the board has a burned pin I’ll have to find a way to test the board before buying anything.

[@sy73326]

Smitty awesome videos. You got anything that shows how to replace the cliff sensors?

[@don4628]

Great videos! But I haven't been able to find the model I have - a UR1105ARUS. On mine, the vacuum motor went out - so I purchased a replacement and went to work R&Ring it.... When I removed the top cover, a small PC board (marked 'Dust Cup Hall (or Holl) PCBA) came loss and fell out of its place. Markings in it include the following: E486784, K01-RV-02-05, 0080749. I didn't see where it came from or where it goes back. I completed the repair or the vacuum, except placing that PC board in its rightful place, and it all functions - except that it now has a hard time docking and although the tower does it job, I get an error on my phone "I am unable to empty debris into the dock dust bin. Please empty my dock dust bin and remove blockages.". Do you have any idea where that PC board fits back in place? Thanks in advance!!

[@user-pk1xc4wc5i]

Hey great videos. I have a front left cloff sensor that either looks cracked or something inside. Do you have a video on how to replace it. I called shark and they said they do not sell that part. Thanks

[@joezamora616]

You can probably use any personal security cameras you have in your home that uses night vision mode. I was even able to see the IR with my doorbell camera.

[@darrenkahler7244]

Is there a fix to move the robot to a level surface, error #10? I have moved this thing to a level surface and it is not working any ideas would be great help for me thank you

[@danyflorez]

Hi Smitty, is there a way to disable this sensors? I have this error again and again and I don't have stairs or something like that, the robot is just on circles, also getting erro with the boudary strip.

[@BryanHughes0]

Do you have a repair service?

[@Chillsies]

Hey smitty,