How To Test your Laptop Computer Charger Power Cord Adapter Cable

[@PC_Monkey]

Thanks for watching! Please consider subscribing to my new channel here: www.youtube.com/@jamminpcs. I'm trying to move the easier hardware stuff there so that I can focus on the more in depth troubleshooting and diagnostic videos here :)

[@diegodude222]

A hero. Not the one we deserved, but the one we needed. Nothing less than a knight, shining

[@justaguy4real]

finally a well explained multimeter video about laptop power supplies. good stuff guy. got another subscriber now

[@PC_Monkey]

Thanks !! Glad this video was helpful :):)

[@je19662008]

In addition to testing your charger's voltage, you also need to test its current (amps). It's entirely possible for a charger, or any electrical device, to be putting out proper voltage, but little to no current. Testing for current is an entirely different animal than testing for voltage.

[@kitto6063]

Well tell us please!

[@Elpipiton]

Entirely different animal lol no. If ur getting voltage, and the load isn't doing it's thing....replace it.

[@tunesnocopyright8879]

You're right because my laptop charger has this problem

[@Yah-np1or]

Your freakin good!. I learnt something i always wanted to learm multimetr. God bless you.

[@PC_Monkey]

Great to hear !! Always here to help :):) Feel free to follow my other channel that I'm starting that will offer computer operation tips and general tech tips !! www.youtube.com/@JamTechTips

[@MORGAN31ish]

I just want to say hi and thank you for your videos, they are really easy to follow unlike some I've watched before. Thanks again.

[@PC_Monkey]

Thanks !! Glad this video was helpful :):)

[@ipqp23]

Well discuss. Easy to follow. Thanks for making this video.

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@ridingblues]

Ah yes those lines on the VOM! Thank you!

[@Monkeywrenchmotorcycles]

Thanks. This helped me diagnose a dead power adapter on my all-in-one

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@vanta6lack]

thank you! short and informative

[@PC_Monkey]

Thanks !! Glad this video was helpful :):)

[@ummzzyy]

2:45 if u get it u get it 😏😏

[@OmegaWolf]

lol

[@YoSocial]

Ummzzyy 🤣🤣

[@OmegaWolf]

@@YoSocial lol

[@kristiesanders8289]

OmegaWolf uhm 😂😂 no

[@2-Corrupt]

What are you 12? Mee too. That was freaking hilarious.

[@ProjectDreamCatcher]

VERY IMPORTANT - just incase they want to check other chargers you should tell them about the little symbol on the back of the adaptor that shows if the possitive (+) is in fact the center! Some are reversed (+ on the outside). Things can seriously fry if you're not sure. I think you are safe using the meter though? Thanks for the video.

[@PC_Monkey]

Thx!

[@aegith1816]

It will work fine if the cables are reversed on the multimeter

[@雪アンアン]

Multimeter i guess has that kind of protection

[@Loduwijk]

​@user-ti5fd3gs8z not protection, it just reads the voltage normally which is now negative since it's reversed. In this case you can just ignore the negative sign.

[@marykeane728]

Huge help! May not have solved problem, but helped me to know how to know if there is a problem! Highly recommend!

[@PC_Monkey]

Glad the video was a bit helpful :) What problem are you looking to troubleshoot?

[@marykeane728]

@@PC_Monkey A Samsung Chromebook worked faithfully until it suddenly did not. I tried to take a step by step approach. Absolutely nothing shows up when I try to turn the Chromebook on. Pressing refresh and on does nothing. The charger light does not function. Thinking that it might be the power cord, I was, quite luckily, within the return period. A new cord has arrived but there is no change in result. I am at a loss. Perhaps the Chromebook just died. However, I do not give up easily. I have had Chrome OS go kerfluey and have brought them back to life. But this does nothing. Of course I am out of warranty. I do not see little screws on the back of the clamshell, so I cannot investigate. Here is the product info: Brand SAMSUNG Series Chromebook 4+ Screen Size 15.6 Inches Color Silver Hard Disk Size 32 GB CPU Model Celeron N3450 Ram Memory Installed Size 4 GB Operating System Chrome OS Card Description Integrated Graphics Coprocessor Intel Celeron Processor N4000

[@PC_Monkey]

@@marykeane728 1. Were you able to test the charger cord as seen here to see if its putting out a correct charge or not? You mentioned that the light no longer came on for the charger. 2. For a computer that does not turn on, try this video first; kzbin.info/www/bejne/hmSsaJd6pdB9ptU. Let me know how that goes :)

[@marykeane728]

@@PC_Monkey I do not have a testing apparatus like the one that you use. As I just swapped out the first cord that I thought had failed for a new one that also failed, I am inclined to think that it is not the cord. I put this comment in the wrong feed. I watched a video about removing static from the computer by removing the back and performing a few tests. That may be the one that you have cited. I cannot see any way to get to the inside of the Chromebook I am trying to bring back to life. Nothing works!

[@PC_Monkey]

@@marykeane728 For a computer that does not turn on, try this video first; kzbin.info/www/bejne/hmSsaJd6pdB9ptU. Let me know how that goes :) For help accessing an internal battery, refer to this video; kzbin.info/www/bejne/qoamh4FofLGMq6M If you know your computer's model number, I can help you get inside your specific computer :)

[@fikkry919]

Thankyou so much for teaching me,sorry for my bad langguage

[@PC_Monkey]

Happy to help :) Always here if needed !! Your English is fine :)

[@Sang123-19]

Thanks brother i learned from you how to check really am very greatfull to you god bless you stay safe and be happy always... Soo much thanks for this video

[@PC_Monkey]

Your welcome !! Happy to help :)

[@michaelpatton3673]

Thanks for your response. Please understand I am a novice with this stuff. I bought a meter tested the power supply it is fine. I watched your video on testing the receiving Jack in the laptop. There is a ribbon cable over it and I am not sure how to unplug it to access the Jack to test it.

[@PC_Monkey]

Sorry but this comment isnt attached to any other comments. It sounds like there is previous conversations here but I cant reference any other comments. What is the issue? Or can you reply to my comment on the conversation thread? Thx

[@mright8351]

Thanks, good. Got it working now.

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@otekaieke111]

Good presentation, thanks

[@PC_Monkey]

Thanks !! Glad this video was helpful :):)

[@cadechristensen2119]

Excellent, clean, easy to understand video. Great job.

[@PC_Monkey]

Thanks !! Glad this video was helpful :):)

[@Quest7494]

Appreciate your video!!

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@earthcomedy]

thanks to your video...was able to fix my machine from not charging! I never thought it could be the AC Adapter that was the problem. Before looking at that, I replaced the internal battery, which for a long time was drained - I would get a startup warning msg, but I just ignored it. Then one day it didn't work anymore..... the new battery wouldn't charge - but it did power up the machine until it ran to zero. Thought maybe I got a dud and was going to exchange/return it. Then I saw your video. I tested my old/original power adapter and it shows 19.5V stable on the multi-meter...but I had already ordered a $12 replacement adapter on Amazon. Thought, what the heck - I'll try it anyway.....and it worked! Yet, the old/original adapter does not - even though it tests at 19.5V. Not sure what the deal is....

[@PC_Monkey]

Glad your all set :) Always here if needed !!

[@drt4789]

Amp?

[@R.M.L.M.Renewed]

If my laptop charger is supposed to put out 18.5 but the multimeter says its putting out 19.48 is that ok?

[@JBGecko13yt]

thankyou!! saved me a lot of money. turns out the plugs breaker was thrown. I had to get to the level of testing my electrical though. its a new combo plug with its own reset. the discouraging part is that it has a light on when the breaker is thrown but that mean no power.

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@Dnasty1]

Thanks easy and to the point

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@Dnasty1]

@@PC_Monkey could there be another issue with the adapter if the voltage shows normals?

[@PC_Monkey]

@@Dnasty1 Yes, its possible the adapter could still have issues, but the Volt is good general gauge if its working well

[@zodiactheunicorn6452]

Ok ur a life saver!! The last vid I watched helped me so good tysm! It was my charger I Believe

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@dr.sammypryor]

Thank you so much for this video!

[@PC_Monkey]

Your welcome !! Happy to help :)

[@SubwayJack919]

Thanks for the accurate video.

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@ElectroPopSelection]

Thanks for the tips

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@ideas8854]

Not all heroes wear a… Thank you. ❤❤❤❤❤

[@PC_Monkey]

Thanks !! Glad this video was helpful :):)

[@alfredkay3210]

Thank you, I tried all the troubleshooting tests , I found out it was the charger. The pin inside my HP charger breaks. However I left my laptop running throguh the night and it was just running on the battery. And eventually the battery died and the computer went off as well. I tried to reboot it but no dice. After the troubleshooting I took the power code to a computer shop for a test and I found it was my charger (power cord), a broken pin that is inside the power cord. $30 replacement new power cord

[@PC_Monkey]

Glad your all set :) Always here if needed !!

[@MagicJames-123]

Thanks for your video. My power adapter is Type C connector. How can I touch red pin to power part of pin which is too narrow to touch . Thanks.

[@tjohnsimon]

Thank you. Should we check the ampere using the multimeter ? what is the meaning if the ampere is not as per spec?

[@PC_Monkey]

The Amp of the charger does not need to be exact although it should be at least what the computer is calling for.

[@faiscadrake7590]

Thank you so much!

[@PC_Monkey]

Your welcome !! Happy to help :)

[@unicomp5705]

Ok.. Now, let's see you test a more common USB-C charger..... There must be a simple voltage reader you can plug onto the tip and get a digital readout of the voltage on a usb-c charger. Mike in LA, Calif

[@Heisenberg........_]

I enjoyed your video however I have a question about the multitester? My tester has 5 settings on that symbol 500, 200, 20 then 2000m and 200m which one can I use?

[@thutch77]

You've probably already moved on, but the answer is, "The lowest number that's higher than the voltage that you're trying to measure." So if you're trying to measure a 19v charger, choose 20.

[@rmendoza5953]

It's actually a "ballast", It lowers the voltage leaving the unit.

[@Sbradyman]

thanks for the video. I tested the cable & it was working fine, but the laptop still wouldnt power up. I removed the laptop battery, blew on the sockets & put it back in & yay it powered up. info might help somebody ;)

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@ChaosBW]

So helpful red inside black outside thanks

[@miztrusa]

Indeed.... I've been searching everywhere to find out how to test a plug like this. 😊

[@JamesTomlin-ll7lt]

not related to this subject but, do u have a video on upgrading the ram and hard drive on a HP 15-F233WM laptop?

[@PC_Monkey]

Yes :) Let me know if this helps: kzbin.info/www/bejne/ZnvJh59-fNiWoNU

[@janel697]

Hi Jamin, since 2010 I have had Acer Aspire 5740, after couple of weeks not using not turning on it has no life at all!!. Had no battery bc the one I ordered was a fire risk, so did not replace. I just ordered one again. The power adapter light is green., so it must be good, right? Power strip w surge protector is good. Next? Open hard disc bay? I ordered a screwdriver, waiting for directions from you please. I'm not a techie. New subscriber, your videos are good and are appreciated by your subs.

[@PC_Monkey]

1. For a computer that does not turn on, try this video first; kzbin.info/www/bejne/oYClimehZ7Khlc0. Let me know how that goes :) 2. Also, did anything happen before this issue appeared? Liquid spill, overheating, Windows update, etc?

[@wellschaung1110]

Correction. 19 volts adaptor the multimeter reader must read a bit over 19 volt. If it read 19 volts exactly, it may not have enough power.

[@PC_Monkey]

Feel free to do that for the customers in your computer shop lol. Ill stick to this for mine :)

[@alcon04]

Hi. Can I use an AC adapter with 32V Output to replace a 30V? I lost the original one. This is for a telephone system. Thank you

[@PC_Monkey]

I would not use an adapter with more Volt that needed on any electronic device personally

[@alcon04]

Thank you@@PC_Monkey

[@AquaticSkipper]

My laptop adapter is 11.8A output, should I use a multimeter with a 10A option or a 20A option? Or does it matter? I notice you use the other option for power on that multimeter, why? You dont explain that choice. If your multimeter was in "10a mode" for red, would that prevent you testing amp outputs either below or above that maybe?

[@jlr1487]

@1:57 you insert the red tip inside the pwr adapter; its unclear to me exactly where, I think you say "wall". Does that mean all the way to bottom end, or just internal sidewall. Thank you

[@PC_Monkey]

Each charger cord is different. If there is a pin inside, you would put the red probe on that and do not touch the inside 'wall' of the charger pin

[@jlr1487]

@@PC_Monkey Yes, there is a middle pin, but meter stays on 0 on it. After a few tries, It does display adequate voltage on inside wall.

[@tomkathylindstrom7047]

...but theoretically the power adapter could be putting out the correct voltage but not the correct amperage. I am trying to test amperage because I have two new batteries neither will charge but the charger indicates the correct voltage. Could be two bad batteries, granted as this is an old camcorder and the only batteries on the shelves are years old (even though the seller assured me they were made in the past year). Any clarification? I can order a new adapter for $15 on ebay or amazon but not before I know it is bad!

[@MarkBlauerstern]

Can you measure the current coming out of that charger (adapter)? Or it needs a load for that? However, how do you measure currents with a multimeter? generally speaking

[@PC_Monkey]

It usually needs a load so it can be somewhat dangerous to measure that correctly. Which is why you dont see a lot of videos showing how to do that. Sry :(

[@saren6538]

I bought an 18v 1ma Psu for my audio mixer and it started smoking inside the mixer. I did your test and it’s putting out 21v but it’s labelled 18v … I’m assuming this isn’t correct and why it’s smoked ?

[@marius.iordache]

Let's talk about something more advanced... My laptop is charging, the charger is giving 20V but whenever I'm charging the laptop my touchpad is not responding as initially (everything is slowed down with random touches). Many people started confronting this issue and some are saying that is related to electrical noise and grounding. But the charger doesn't have any grounding. How can I check the noise with oscilloscope?

[@SKSK-xe2zu]

how to check the charger (oin haed) current leakage? can use test pen?

[@mml1224]

i got a multimeter but it dont have the line/3 dot 'symbol' THATS ON there , it s on dcv and the other dial is V ma-kn 100........." is that the sam edial? thanks!

[@ericwhudson]

DCV stands for DC voltage. It is the same thing. The main thing to distinguish is that you are measuring voltage (V) not current (A). This often involves both a dial setting (as was shown in the video) and proper placement of the probes (if you look in the video you'll see that the black probe is in COM - common or on some multimeters it will be GND for ground; the red probe goes into V NOT A).

[@cactusladysouth1000]

Thank you

[@PC_Monkey]

Your welcome !! Happy to help :)

[@mathrodite]

There's a hole a mile-wide in this video! How do you test the amps?

[@alfredthirdy9716]

sir does the charger adapter is plug into the wall electrc socket while you test the voltage with the multi meter?

[@PC_Monkey]

Yes, or you would not be able to read any power :)

[@alfredthirdy9716]

@@PC_Monkey thank you sir appreciate. more tutorial to come its informative and educational and its really helps a lot.”,

[@PC_Monkey]

@@alfredthirdy9716 Happy to help :) Always here if needed !!

[@tommccarrick18]

Could I ask a question about the reading?

[@PC_Monkey]

Yes :)

[@Tazovskyy]

19.9 from 19.5 rated is considered bad? Also touching the inside wall reads this but touching the pin only gets 13.2

[@J22-m1q]

Awesome video thank you. I have a question my charger should be 19.5v and I'm getting 19.31 would this mean the charger is ok?

[@PC_Monkey]

Charger should be ok to run the computer. Why are you testing the charger? Computer running well?

[@J22-m1q]

@@PC_Monkey thank you for your reply. I brought dell inspiron 1545 the seller told me he had brought a new battery and charger but I'm getting a error message that charger is plugged in but not charging, so I checked the laptops specifications and the charger volts match but the battery does not, so I'm trying to figure out if the culprit is the battery or the charger. Long message sorry about that.

[@J22-m1q]

@@PC_Monkey also i checked out your dell videos i have ran diagnostics it comes up as power supply but the laptops battery is at 4% but the laptop works fine when the power adapter is plugged in. So I'm guessing it may be because the batterys volts are lower than the original battery

[@cheems3483]

@@J22-m1q did you find a solution, im going through something similar

[@J22-m1q]

@@cheems3483 I just got a new laptop after trying a new battery and adapter. There are so many possible faults to eliminate. You should try calibrate the battery before replacing the battery or power adapter for sure.

[@johnwhite1608]

great absolutely great

[@PC_Monkey]

Thanks !! Glad this video was helpful :):)

[@niteshkumaryadav8532]

Sir , few days ago my laptop has occured an issue that it's taking more time to turn on but now it's not turning on, can you give some suggestions?

[@nkyizs4904]

Try to check the charger. do have a multi-meter?

[@chu33es87]

@@nkyizs4904 I dont have a multi-meter, mine worked fine and one day it just didn't turn on and when I hold the power button for a minute, the keyboard will flash for a second in white, and when I plug in the charger it doesn't show the charging light thing do you know how to fix this issue

[@MrGtagangster]

Just to mention something else, the charger might be able to put out the required voltage but NOT the required Amps for the device connected (eg. Laptop). Amps are necessary too! (I hope)

[@PC_Monkey]

Yes, very true. This was one of my earliest videos shot prob around 5-6 years ago, back when I was Pointe Tech. Just havent got around to updating it yet. But its on the list :)

[@enermaxstephens1051]

@@PC_Monkey I would love to see an updated video. One that shows volts, amps and wattage. That way we're 100% sure the power supply is functioning properly.

[@PC_Monkey]

@@enermaxstephens1051 Testing A and W are a bit more complicated than V. You wont find too many ppl on here showing how to test for the A. Im still working out how safely to show it and will post a vid when I do :) Another way to see is to simply replace the charger with one on Ebay, Amazon, or another place that offers free returns.

[@dannijabara]

Yes. Voltage is whats required for the adapter to push current (Amps). It may have Voltage, but that doesn't mean current is there so this video is VERY counter productive.

[@mml1224]

jamie .i liked ur vid!...hey my 2yr old hp 15 labtop pav wont charge past 83 perc, wat gives? is it time4new battery or charger, fyi: no external battery, just internal.........any suggestions? thanks!

[@skninfo2118]

Middle pin also show same voltage is ok..?

[@PC_Monkey]

Yes :)

[@bob1966me]

Thank you it was my cord the cat chewed it lolthanks tho

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@davidpride590]

The wire end near the connector can be worn inside but still show voltage plug in the computer and wiggle if you see the light go off or flicker at the same time you bend the end right near the 90 degree plug end that is your issue you can repair solder but if your really desperate sometimes a bit of cable surgery and an alligator clip or even a paperclip can make the repair if your not worried about a fire but it is low voltage DC. If there is poor connect some laptops will flash the charge lights or just shut off, if you enter safe mode or the bios startup mode F1 F2 etc then you can charge without drivers installed or with duplicated or corrupt drivers that the short might have triggered a reset or duplication of or some other internal protection circuitry etc. So it might only be able to charge in this mode until properly repaired by reseting the bios or getting a new charger battery or both but try a different charger at the computer shop first the battery and charger are pretty cheap. I have even spliced a different charger with the same approximate voltage and it works fine for a fair period if it heats up there is too much load maybe not Enuf watts etc bigger is better if you charge 4 cell phones in your USB etc or any extra loads. If it runs without battery and doesn't short u can leave the battery out as charging the battery is the biggest load usually. So unplug any USB loads and the battery plug in charger but leave computer off or in bios boot mode before the drivers load then use a USB load to verify power stays on like a cell phone that dings when it charges if it dings on you. Have a solid charge connection if it keeps flicking on and off you have a poor connection or very corrupted drivers. Delete all drivers and their duplicates From device manager before rebooting past bios start or safe mode if no flickering then it's software related if flickering still. You have a bad connection somewhere check external. First but could be pin in or internal. If it charges off fine then you can only run until the battery dies as the battery power is a different source location but tees in somewhere inside. But it works half the time lol. The charge onky load is less than when running with charge and USB load total a weak Or low output smaller charge cable might still have Enuf juice to run without battery and without major USB loads you can properly splice in a larger charge cord of simular voltage with more watt output on most laptops if the internals do not accept it can. Still charge the battery when turned off. The battery lights usually will turn Color when charged do not overcharge unless you enjoy a good fire always check. For heat at battery and at charger warm is ok but hot is troubke heat indicates load or excessive load like an internal battery short always test in a safe place. Do not. Leave unattended unless 100 percent safe from fire. Solder it up properly using heat shielding or cold solder techniques with proper fire rated insulation etc. If you. Short circuit the charger it can be destroyed quickly with open circuit wires inside the box usually. Not repairable. Get another and test continuity and polarity before plugging it in. Do not reverse polarity usually the pin is positive and the outside wire and outside pin. Are negative DC remeber AC is converted by the charge coil and any electronics inside the charger cable box. Sime even have an led showing DC power out but the connector end can still have an incomplete circuit to the computer or battery charging system. So the volt test is not always accurate but a good start. Enjoy all and be safe

[@mkbokria1319]

@@davidpride590 Thankyou for your suggestion!

[@kaifyuu]

@@davidpride590 damn bro you typed alot

[@malikusama919]

​@@PC_Monkeymy laptop is not turing on plz plz tell me the solution

[@Kizen.]

What if the adapter has degraded to the point where it may not be able to put out the power consistently, and potentially dips? Would that maybe cause it to seem to "disconnect" at times when connected into a laptop?

[@PC_Monkey]

Yes, that could affect the computer in that way. The solution there would be to replace the charger. Let me know if you would like assistance in locating one

[@Kizen.]

@@PC_Monkey I have a replacement coming today. I'll see if the problem is resolved tonight.

[@PC_Monkey]

@@Kizen. Good luck !! Let me know how it goes :)

[@Yash-Gaikwad]

You didn't check the amps. Should you be checking amps?

[@ericwhudson]

Can't really check current. These are voltage controlled power supplies. That is, they supply a constant voltage. When you put a load on them (e.g plug it into the computer) then the supply will need to send out current in order to keep the voltage where it wants to be. If you tried to measure the current just of the power supply you'd be "shorting it" (attaching the +19V signal to ground through your multimeter) and you'd likely end up damaging the supply. DO NOT MEASURE CURRENT from a constant voltage power supply (pretty much any standard power supply). It is a similar effect to attaching a wire from one end of a battery to the other - you'll just end up draining your battery. Except for a power supply, depending on its design, you have a risk of completely frying it.

[@olo-burrows]

True. It could put out 19 Volts just fine for the meter with no load, but when plugged into the laptop a bad capacitor in the power brick could cause excessive a.c. ripple that upsets the computer. Or the power brick simply can't put out the full 4.74 Amps any more for whatever reason. If you can borrow the same kind from a friend to test that would be one test to make.

[@balrajkene5891]

Sir my notebook is having nonremovable battery And in case of bias reset I can not remove battery So is it necessary to remove battery with power cord removal at the time of bias reset?

[@PC_Monkey]

To perform a BIOS reset, yes, you would have to remove the CMOS Battery. Are you saying your CMOS Battery is non-removable or the main computer battery is non-removable?

[@jlr1487]

@@PC_Monkey @Balraj Kene A couple years ago, I worked on a cheap Acer laptop and it too had a non removable cmos battery that was soldered in .

[@PC_Monkey]

@@jlr1487 Yes, many computers use a CMOS battery that is soldered on. If you wanted to remove it for any reason, you would have to de-solder it.

[@angelosilva6924]

Hiii. For example 2 of them showed bigger values than mentioned on the multimeter. For example one with 5 volts appears 9 on the multimeter. What could be?

[@gavilander]

Sometimes I've seen damaged power adapters with the right voltage reading, maybe the current could be the problem sometimes

[@PC_Monkey]

Yes, the current can also be faulty in a charger at times.

[@k1k4h4l9bl]

Is it enough to test the voltage alone? Don't we have to test the amount of current? Here I have a Dell laptop that shows an error - it does not recognize the AC adapter and, accordingly, does not charge the battery. Otherwise, with this charger the laptop works - it loads Windows, the applications open. On the back of the power adapter it says that the output has 19.5 V and 3.34 A. The charger voltage test shows 19.75 V, but the current test shows 0.57 A. Isn't this charger damaged?

[@PC_Monkey]

Yes, the current charger could be damaged. Are you able to try the steps seen here as well? kzbin.info/www/bejne/opO9eYeZfNt_nKM

[@lesegomaleke1923]

Easy way i found out that my character was working was that i pit my tongue in the charging pin hole. Very effective test. I was shocked that its still working

[@Al104Figueroa]

in my case, I tested it the way you did and I got 19 vdc but when I inserted it to my desktop, it didn't work and when I tested it, there's no power. I unplugged it and discharged the output terminals and turn on again, there was 19vdc again. I repeated the process and the result is repeatable. there is something that tripped in the charger every time I use it in my desktop but, it works on my laptop. it seems that there is something in my desktop that trips my charger off

[@PC_Monkey]

1. For a computer that does not turn on, try this video first; kzbin.info/www/bejne/oYClimehZ7Khlc0. Let me know how that goes :) 2. Also, did anything happen before this issue appeared? Liquid spill, overheating, Windows update, etc?

[@venkateshiyer4072]

Hey ,can you tell me when I plug in charger light is on ,pc is also on but still is doesn't shows charging and sometimes the light displays orange or white . So what can be the issue can you plz tell me.

[@PC_Monkey]

Is the computer working normally other than not charging the battery?

[@richardwalton5135]

My adapter has a stripped cord at the junction where the rubber 'ribbed' part of the cord about an inch and a half before the insertion point. This seems to be a regular place for the failure on my computers. Do you have any suggestions on how to avoid this and have you made/do you plan to make a video to show how to fix such an issue? Is it even worth trying to do so?

[@PC_Monkey]

I would replace it rather than try to fix it. With power to the computer, your always better off safe than sorry. Best way to not let cords end up like that is to have little to no stress on it.

[@kakashihatake1506]

Hey I have a project and the big box gets hot as hell is it supposed to be doing that or am I going to be needing to return it ?

[@PC_Monkey]

When you say, 'the big box', I assume your referring to the power adapter? If thats getting very hot then no, its not supposed to do that. I would replace it asap

[@thrivingbranch]

Hi. I know this video is old, but I need to test a laptop adapter that has a rating of 19V and 12.5A (it's a big Dell Alienware). The Multimeter I have is only rated for 10A max My question is, if the meter is set to measure voltage, and the leads are plugged into the voltage socket... do I still need to worry about the amperage? -- don't want to blow up my meter, or anything else 😅

[@PC_Monkey]

Usually Amps are not a huge deal. As long as the Amps are at least what the computer is calling for. It will pull the Voltage as needed :)

[@thrivingbranch]

@@PC_Monkey thanks for replying. So I should be good as long as I am only measuring voltage on the voltage input of the meter, even if the AC adapter of the laptop has a higher amp output than the multimeter supports, right? I haven’t really used a multimeter before, and know next to nothing about electricity, so this is all new for me. Thanks for answering my stupid questions.

[@PC_Monkey]

@@thrivingbranch Yes :) np :)

[@SKSK-xe2zu]

Sorry how to check the charger (Pin Head) current leakage. use test pen check?

[@lindali2827]

Is there a way too see if your charger is still working with out that machine?

[@PC_Monkey]

No. Without testing the charger, its just a guess.

[@joelalba9008]

Does the power jack need to be the same as what your laptop originally has or it just needs the same voltage output?

[@wraith7460]

same voltage output

[@christhedemocrat]

Does that indicate that it is center positive?

[@mattp-b6921]

Hi PC Monkey. My ASUS Laptop will not turn on with or without the battery connected. The ASUS Laptop states 19V & 3.42A and the non-genuine power adapter, that was given to me with the laptop, states 19V & 4.74A (Is this difference a problem?). I have tested the power cable as you have shown in the video & I get upto about 19.6V. Is the Amps important? I tried to test the Amps and (assuming correctly tested) initially received around 2.6A now I'm only getting around 0.6A. Do you think this makes my problem the power cable?

[@PC_Monkey]

Shouldnt be too much of an issue. All the steps for a computer that wont start are updated into one video here; kzbin.info/www/bejne/hmSsaJd6pdB9ptU. Let me know how that goes :)

[@nkyizs4904]

Do you know what this problem could be from mainly

[@PC_Monkey]

This video shows how to test a power adapter. Its not showing how to fix any particular problem. Not sure what your referring to.

[@ryder4721]

HOW do you check the C adaptor for the hp chromebook?

[@samikamal8432]

Thanks

[@PC_Monkey]

Your welcome !! Happy to help :)

[@theScholar369]

Hey there I got a new asus vivobook 14 laptop last November Around 5 months ago Now its not turning on Not even the lights. There is no shop around due to covid Can't get a multimeter But i do think they are not the problem as they are relatively new Can you drain the static if you don't remove the battery and press the power button for 1 min I am not removing the bottom as it might screw the warranty

[@PC_Monkey]

For a laptop that wont turn on, start your troubleshooting process here; kzbin.info/www/bejne/lX6ylmpnoKeDhbs Let me know how that goes :)

[@theScholar369]

@@PC_Monkey like i have commented above. The laptop is new It is not turning on and the light too is not on. I didn't remove the battery as it is not removable from outside. ( as it may be wrong with the warranty period still valid) But i did unplug all the wires and usb and pressed the power button for 1 min and it didn't work. Is it necessary to remove the battery for discharging the static ?

[@viruantala1183]

Hi, I wanna buy new laptop . Which one u suggest ? Now I am using lenovo I7 please guide me to buy new laptop for my personal use

[@PC_Monkey]

There are many laptops out there. It depends on what you need it for and where you live as not all computers are sold everywhere. What programs are you planning to use?

[@philthreadgould833]

The testing worked perfectly. However, I jammed the red prong in too deeply and this bent the internal prong. Then it would not go back into the laptop. Almost ruined my power supply. You may want to warn viewers about this.

[@malcseaman9807]

Followed this along great until I remembered that the plug on the end of the charger I need to test is USB type C. No 'inside and outside' to insert the red and black leads from my multimeter. Gak! What do I do in this case? Any ideas please?

[@leafeater5453]

My Chromebook’s charger has a tip similar to a mini or micro usb port, not your standard round plug with a + and a -

[@veeeks2938]

I tested my laptop charger. It's rated at 19.5v DC but only outputs around 11v on a multimeter. I take it the charger is kaput? Or is that within an error margin?

[@PC_Monkey]

I would replace the charger. Thats not within error margin :(

[@veeeks2938]

@@PC_Monkey Thanks for the reply. Yeah that's what I figured. Oh and subbed!

[@Shinken69]

What about the centre sense pin???

[@devhc5104]

can i use my dell 5559 charger adapter if its output rating is 19.5 volt but in multimeter it is showing 21.5 voltage now days. is this high voltage it safe for laptop motherboard.? my laptop battery is also dead.

[@PC_Monkey]

I would not. Higher power intake could definitely damage components. Great job testing that and identifying that issue. I would def replace it

[@machxisgaming3409]

I did everything except the voltage does not stay the same or equivalent to the output. It kept decreasing base on what i observed on my multimeter. So does that mean my charger capacity life is near its end?

[@PC_Monkey]

Yes, if the Volts keep decreasing, then the charger has become defective and should be replaced.

[@machxisgaming3409]

@@PC_Monkey thankyou so much for your help and reply🙌🏼

[@PC_Monkey]

@@machxisgaming3409 Happy to help :) Always here if needed !!

[@chandraprakash_nawrange]

My laptop turns on only with battery but with adapter it's shows ac adapter type and wattage can not be determined your battery may not charge. I have checked adapter same as you told and I found that adapter output is same as my laptop. I didn't understand where is the problem. Sir can you tell me what causes the problem?

[@PC_Monkey]

That usually means there is something wrong with the adapter or your software. You can see how to fix that issue here; kzbin.info/www/bejne/opO9eYeZfNt_nKM

[@TheEgg185]

What about amps???

[@KNFIX-CUCHI]

thank sir

[@galimirnund6543]

So, if the meter is correct as far as volts... do you not need to worry about amps? I'm a noob..

[@PC_Monkey]

Possibly but usually not. Testing for Amps is much more difficult and dangerous so I dont recommend viewers do that. However, replacing the charger is always a good troubleshooting step if your battery is not charging

[@thavionhawkmkii4509]

What about the amperage?

[@Martin-ot7xj]

Hi there please make a tutorial video about short to ground laptop motherboard.. How we can check and diagnose short to ground.. Pleaseeeeee. Thnx

[@texastitan6567]

Is the charger plugged or unplugged from an outlet during this test?

[@PC_Monkey]

It would have to be plugged in or it couldnt read a charge :)

[@texastitan6567]

Ah. I’m new to multimeter wasn’t sure if they produced their own charge but in hindsight yea that doesn’t really make sense

[@kingshearer2]

did you plug the charger into the wall?

[@PC_Monkey]

Yes. You would have to in order to see power...

[@kingshearer2]

@@PC_Monkey sorry I meant to delete this comment since when I watched it back you say that you plugged it in.

[@joshygaminghub7428]

is there a way to fix a charger that it charge sometimes and there is a reading it says 19v but if you move the wire in any position, it will not charge, you need to find a sweet spot for it to charge

[@PC_Monkey]

When that happens, usually the power adapter tip or the power jack on the computer is physically damaged. One will need to be replaced.

[@joshygaminghub7428]

@@PC_Monkey I tested the charger itself using multi digital tester, it did output 19v sometimes when you move the charger just a little bit, the tester will read only 0.01v, is there a way to fix the charger or Cut it and reconnect the wire together or it will not be easy?

[@PC_Monkey]

@@joshygaminghub7428 Usually not worth it. Or at least I dont do that in my shop. I would just replace it.

[@shaunsaju7084]

I have msi laptop ..my dc output varies from 16-18 v ...but it is rated 19v...my laptop is not charging..but when I keep the cable in certain positions it charges...also the cable heats up a lot...is the problem due to my connector cable ,my adapter or my laptop pin? Pls help.. thanks in advance

[@PC_Monkey]

I would test the charger as seen here to confirm its healthy. It also may be your power jack, as it needs to be at a certain angle. The jack could be damaged. If the charger is heating up severely, however, I would guess it needs to be replaced. Do you use your computer with a surge protector? You should.