How to thread a serger - Lower Looper (Part 1 of 4)

[@donnabullock2066]

Can't tell you how wonderful and useful your 8 videos on how to thread and use the overlocker have been to me. Gamechangers. Thank you so much. Love from Australia. XX

[@charlotteortiz1233]

I want to thank you so much for posting this . My Mama suffered a couple of strokes, that messed with her memory. She got out her serger, after more that 20 years , to make something for her sister. She was so upset that she started sweating and her nose was running …. I certainly couldn’t help her ! You and other’s post these videos to help people but I need you to know how very helpful you are by doing so . Thank you from the bottom of my heart .

[@yvonnejoy7962]

Wow! Am I glad I found this video. I have had my serger for almost 12 years and today is the first time I see how to thread it with ease. I have been cutting off and pulling through threads when I need to change colors. Lady you are the best! Thank you for sharing

[@josephineaitchison3745]

Thank you for helping me. I am so grateful that I found your video. I have sat here for 2 days trying to thread my over looker and had now success you saved me thank you thank you. 😊 Josephine

[@Ginger_Vixen]

I cannot count how many times I have used your video for reference of how to thread my serger. Thank you so much. Beautifully explained and excellent camermanship. Thank you, Thank you, Thank you !!!

[@coletteemerson5380]

I have just acquired this serger from an old friend. I sat and watched all your videos on this machine. I am so inspired by the way you talked and taught this easy walk through on “How To Use This Particular Model” You are so precise and easy to follow. I feel really confident to start sewing and using my machine now. Thank you for your time.😊😊

[@HeatherGoldsmith-pg7pp]

THANK YOU SOOOO MUCH!! I have avoided this machine for years because of threading it. Thank you

[@promisso]

Thank you so much ! This is the clearest easiest explanation of threading a Serger I have seen, after watching your demo it is the quickest I have EVER threaded my Serger. Brilliant.

[@beverleystreater4331]

Just bought an old serger and this was the best demo.

[@orangedog1189]

This is the clearest demonstration I have seen, thanks!

[@orangedog1189]

PS You're my hero now!

[@JJ-vs2gi]

I stuck my serger in the back of my cupboard after so many failed attemps. Stumbled a cross your videos today and your method of teaching gives me the courage to take the monster out again. Firstly I want to know if you are OK? Posted these 6 years ago. You remind me of my very first driving lesson when my late dad sternly said to me: DON'T LET THE CAR DRIVE YOU! YOU DRIVE THE CAR! You give me the same confidence. Wish me luck.

[@diyisabreeze]

I'm glad you have found the videos helpful. And thank you for asking about me 😊 I have made so many videos but haven't had a chance to upload but I'm planning to post more videos regularly starting soon(very excited about it). These videos are from when I was having my after-purchace training session 6 years ago at my local Janome dealer store and the lovely lady who is explaining it all is one of the owners 😊

[@kfaz3979]

Most DEFINITELY the easiest tutorial on the lower looper! It’s the only one I have problems with. THANK YOU! Saved to my KZbin library for my serger.

[@stephaniepokorny4692]

I use your videos EVERY SINGLE TIME I thread lol. No. I cannot remember but you are a life saver. Thank you!!

[@luckybiby8968]

My Serger came with pre-routed with 4 threads, unfortunately, the Lower Looper was wrongly routed. I had watched a lots of other video of Serger threading instructions, may be bad lighting, they failed to show the last 2 threading points of Lower Looper and how to route it, this video was bright, parts were clearly showed, routing holes were easy to follow, it worked right away at the first trial. Excellent Lower Looper threading instructions. Thanks!

[@KathBorup]

I come back to this video every time. Thank you so much

[@lorrainewilby2085]

Thankyou a million times.This is the best video I’ve seen on threading. My blood pressure has dropped! 😊

[@JJ-vs2gi]

I still have the monster in my closet!

[@zelahfines6535]

I’m feeling extra thankful for my babylock now 😅 Fantastic demonstration!

[@terrimichael2946]

Thank you very much! I have struggled with manual to no avail, then found this video. I'm back to sergering! Awesome!!!!

[@sheleia66]

So glad I finally found this video! The manual isn't at all helpful on how to get this thread thru the machine and back [the manual isn't clear to me, whether or how the thread goes thru and out to the left side then back to the righthand side]. The last video I found showed the other 3 threads, starting after this thread was already done...those are the easy ones that I didn't need help with. I just noticed that a few ppl gave a "thumbs down" -- I can't imagine why, unless by mistake. This is exactly what I needed!

[@yvonnedavidson2380]

Thank you for your clear explanation! The best one I have seen.

[@suzicurrier8811]

What an amazing teacher ! Clear instructions . Great for beginner. Best video I have watched . Will be watching all her tutorials . THANKYOU !

[@JJ-vs2gi]

Any idea if she has another channel?

[@qormi1000]

Excellent explanation. Thank you so much. This is the best threading video I have seen.

[@УфильмаликТургужанова]

Super! This one is the hardest one, i always struggling, omg, thank you so much, you showed and it seems easy

[@helenhiggins8260]

Thankyou. Just did this on my mum's (she's 84) 304D machine for her and I know nothing about them. Easy to follow.

[@sdypg]

U really are lovely. Watched other videos & ur the best. Lower looper too hard. U empathise fully with the first timer. And therefore teach so fully & detailed. Shifting the serger around to make it easier to see what to do. 🙏 Blessings will follow you.

[@mabel6046]

Thank you so much for the demo. I didn’t realize the sequence of threading matter that much. I got the interlock to work after following your steps. 😊

[@DestinysPookie]

My 2 brain cells would never remember all this. Thanks! Saving this.

[@heidib8338]

Thank you so much. This bottom one was the worst to try and figure out. I got this serger from my mom who never opened it.

[@diyisabreeze]

You are welcome! I'm glad it was helpful :)

[@busisiwecindi796]

You are the best...all clear to the tee.. Thank you

[@Smalltownteacher]

Excellent "How to"! Thank you! This was exactly what I was looking for!

[@silybet100]

Mind blowing!!! You have to redo all the threads! Thank you so much! Wonderful tutorial!

[@michaeltexeira6185]

Not true she’s on bs

[@jmmichalak]

So detailed and helpful, thank you so much!!!!! Couldn’t remember any of this after 15 years this serger has been boxed up!

[@adriduplessis3177]

, Ek is

[@LindaBowden-zr1ow]

Thank you for clear and concise instructions

[@mdryden742]

Thank you for such a clear tutorial

[@toniaplummer7951]

Ahhhhh you are a LIFESAVER today!

[@karentracycooper1]

Thank you so much, I couldn't have done that without your video and voice instructions. I'm a first time overlocker-er! Now to find your other three threading videos :)

[@carlaholland1091]

I was so frustrated and my book still didn't make sense. I tried KZbin and you saved my sanity!! I've subscribed and thank you for your video!!

[@toniaplummer7951]

Me too!

[@angiederrett6100]

You're a life saver - this is fabulous - thank you so much! :)

[@pjohnson1628]

Thanks for forcing me NOT to be lazy and rethread all and in order

[@tmg1258]

Thank you for taking the time. I got so frustrated with my merger. I was going to sell it.:0

[@charlafarley7209]

I have re threaded my machine several times now starting with thread 1 and the 2nd red thread keeps coming out of the last little hole. It was working and then I went to serge my next piece and it suddenly stopped. I can’t get that red thread to stay in the hole

[@emmaclift1925]

Thank you!! You explained it very well and it helped me a lot!

[@Sodany21]

Thank you so much this is so perfect . My sister is looking to get a 8004D model is this the same way threading ? As she is very worries - please kindly let me know. You are the best Thanks so much for making this Video 🙏😘⚘

[@thomasinamurdoch5103]

You are a gem at stage 4 threading just about to start test sew what should my tensions be at please

[@yvonnesalazar6930]

Dios le bendiga me podría decir donde puedo comprar el prensa tela y cuánto cuesta bendiciones

[@angelaakers7692]

Love! love! love! this! 🥰

[@bobomassey]

Saved my sanity. ❤

[@imoniquee]

This is amaaazing! Thank you 👌🏽😭

[@sskaba]

Thank you very much. So, right in the beginning, what do we do about the small little hole?

[@h2ovvs]

I like your simple explanation 👍🌹

[@pamcraftsandtreats]

I know this is a dumb question, but I have never used a serger b4. how do you know what or which colors go where. like i have a hoodie that is white on sides, but red in the middle. what color should I use or it be best to put all threads white and call it the day?

[@diyisabreeze]

I myself end up using beige color threads for most of my sewing projects unless the fabric is dark then I use either "steel" color or black. I have noticed for light color fabric beige/eggshell color threads always blend in much better with the fabric color.

[@mariedyde448]

The threading sequence is numbered on this model. It should be 1) lower looper, 2) upper looper then right needle then left needle. On other makes etc the upper one is threaded first.

[@ameenajaan1]

Hello I don’t know if you can help but my first thread ,the most difficult one keeps breaking,I’m exactly following the pattern showing in manual ,after inserting all threads when I overlock there’s too much loose overlooking and the upper part of material show two threads but back material show too much gathers loose threads

[@na3imeh]

Can we share this on our Instagram page?

[@barbarashowell6229]

I never would unthread all to rethread one. The diagram shows pretty clearly which threads are where.

[@UthmaanSampie]

Before the thread runs out I snip the old thread , knot the new thread s d old thread and slowly run the Machine and then it works without retreading all.

[@marygracepedrosa1758]

hi. do you know how to changa the lower looper?

[@lyudmilaantonchuk3774]

Thank you, very helpful

[@teresajiang3454]

Her hand is so smart

[@darahpatrice6554]

Thank you so much!! This is so helpful!!

[@kathywatkins6446]

Bless your heart ! Thank u

[@VikingMakery]

Thank you so much for this!

[@milliekennedy9209]

Thank you so much!

[@AartiGupta-hw7lq]

I followed all the steps but the threads are coming out straight and not chaining up 😢

[@diyisabreeze]

Oh no. Did you try threading them all in this order? Lower looper -> Upper looper -> needles When my threads don't form a chain, I usually start over again and rethread them all.

[@jamiekrista]

Omg. Thank you!!!!!

[@kimstone5038]

Thank you so much!!!! :)

[@lisavaniderstine6212]

I have this serger, what. A pain in the ass to thread the first one

[@doreenrobertson4719]

Thankyou 💕☺️

[@patiencekayxo]

GOD BLESS YOU

[@jlouis5217]

My sewing machine repair guy says upper looper, lower looper. Then the needle threads.

[@antoinettehoubart9175]

Superb.... thank you

[@tensjunkie1]

Super helpful

[@monichippewa2232]

Thank you

[@rafaelserrano6715]

Traducción en español por favor

[@elsiereyes321]

Yo tengo la 3434D

[@Bernietheoc]

🙋🏻👍🇬🇧🙏

[@michaeltexeira6185]

Not correct way. REMOVE PRESSURE FOOT,,,UPPER LOOPER FIRST,,,,LOWER LOOPER. NEXT. RIGHT NEEDLE. NEXT LEFT NEEDLE. THE PERFECT WAY. AND YOU HAVE THE BEST BRAND. JANOME.

[@diyisabreeze]

Thank you for the advise 😊

[@christineelsbury5479]

wrong

[@ziziplumb181]

This is amazing you’re an angel. Can you please please make the next steps to threading ??

[@diyisabreeze]

You can also find the rest of the videos in this channel. Please look for parts 1-4 for full instructions.