How to Thread and Test PE535 Embroidery!

[@samanthanodzak1804]

I watched so many videos trying to figure out number 6 when setting the upper threading, YOURS ACTUALLY HELPED!! Thank you

[@ckmc909]

This is the best explanation I’ve seen!!! I am impressed with you doing it one handed!

[@Ethan2Tone]

One handed and the best explanation above all the rest. Glad I found you. Thank you so much!

[@mississippi17state9]

I really hope you continue with videos on the embroidery PE535! You are a really good teacher. Thank you ♥️

[@savonnpeoples3486]

Best tutorial video I’ve seen! I was nervous about using the machine until I watched this

[@Patricia312]

At first I had trouble seeing and hearing your video, but then I made it full screen and cranked up my volume and it was all good. I just have to tell you, THANK YOU, THANK YOU, THANK YOU!!!!!! I just got my Brother PE535 on Friday and I have been searching "how to" videos every since. I have never embroidered before in my life! Yours was the ONLY video that showed me what I needed to know. And you explained it all so clearly!!! And to know that you were having to hold your phone to record with with one hand and leaving you only one hand to work with is amazing!! I love the close ups!!! Again, THANK YOU SO MUCH!!!! I can now embroider thanks to you!! God Bless You!!!

[@Kinarp]

Patricia312 aww thank you, I’m new as well. But anything I find out I’ll try to load more. When I first got my embroider I was looking for how to set it up. Couldn’t find any but, ppl unboxing it. And the manual wasn’t much help, I got confused figuring it out. When I figured it out, I’m like let’s make a vid to help other ppl who is as lost as I was. So here it is, next time I’ll get a camera holder of something. I’ll try to make it better hopefully next time. I forget things I do haha. But, your very welcome, much appreciation!

[@8sonsanchor1914]

Best VIDEO I've come across so far for a brand new newbie. Thank you

[@Maria-d7j1i]

I decided I wanted to try embroidery on some of my projects. I use a Janome with minimal embroidery stitches and tiny lettering. So I am trying out this Brother PE535. This video was SO helpful. I have not used an embroidery machine before and the instruction book is somewhat TOO detailed to get from point A to point B. Your video got me up and running. Thanks so much.

[@Dandymoments]

Very helpful and straight to the point. Thank you for sharing your video!

[@ArnoldBrunson]

Thank you for the video. I was able to FINALLY thread & test my machine correctly with your help.

[@demidirectedit]

Thank you so much for being so considerate and taking your time to explain each detail! Super helpful

[@thelatsamy]

Thank you showing this whole process! It was so helpful!

[@MrRbadali]

Hey this was great...I just got my machine and from this I am already embroidering my custom designs for hockey sweater...I haven't even read the instruction manual yet...great job thanks

[@santanawhite776]

Very informative video. I see 2 things i did wrong. I was trying to do the setup without watching KZbin but thank god i watched you because i know what i did wrong. Tysm

[@meanixlandscapinginc.1372]

Love your fast and get to the point video! this is my style of learning! thanks!

[@bunni5299]

this was so helpful and your voice is so nice

[@Dala-sn5to]

I'm do glad I watch the whole video. Great job 👏

[@doreenwilliams9857]

I now feel confident to start using my machine. Than you very much.

[@NuWurk]

Great Job N showing of details how to thread N wind the bobbin was excellent! Also amazed how u did it with ur left hand! keep it up! N Thank U!!!

[@Kinarp]

Thank you 😊!

[@dez3rae168]

This gave me the confidence I needed to start! Thank you so much for sharing 🧡

[@tchau1999]

Thank you!! I have the same machine and your settings worked perfectly for me! I also broke two needles before I saw this video!

[@Kinarp]

Tiffany Chau you’re welcome 😄!

[@keda6152]

Thank you sm 🤍🙌🏾 awesome teacher & examples!

[@rendmendecclesiastes3728]

Very helpful video! Thank you! I was on the Brother website and it quotes that this particular machine is calibrated to use 40-50 thread weight on top and 90 weight bobbin thread.

[@Kinarp]

Ok, thank you and your welcome😊

[@Nails_bysharon._]

This helped me soooo much!! Please keep making videos I really want to learn. 🤍 and you’re excellent at explaining in detail. Thankyou!

[@aylasugarkane3695]

Thank you so much for the wonderful tutorial!! Really helped me out because I was on the struggle bus!

[@christineroethel4155]

Thank you for this video! I really appreciate the examples you showed on using different intensity settings - very helpful information!

[@poohs1979]

Thank you for this video. It was very informative, and helpful for a beginner like me.

[@chantellmendez]

Tysm...i finally did it with your video!!!!!

[@ClearlyDiana]

Thank you so much for posting this it was sooooooo useful💕💕💕💕

[@sherifkaissi4109]

Thank you for your patience it was really useful

[@gigicaudle1063]

Awesome video, never sewn anything yet, but I couldn't hear enough. I'm fixing to do it,,,,, wish me luck!

[@Kinarp]

Gigi Caudle good luck!

[@HonessyVSOP]

All I want to say is Thank youuu 🙏🏽

[@sunnydelight52r49]

Great video thanks for sharing 👍🏻👍🏻

[@wondafaith8621]

Great video! Try using a tripod stand in your future videos so you won't have difficulty video recording. One-handed training courses can be hard :). Thanks for sharing. Love your tutorials on this one. I will be more than ready when I finally begin (after the machine purchase) because you make things look SO SIMPLE Miss Teacher :).

[@Kinarp]

Wonda Faith Thank you, will do next time 😊

[@wondafaith8621]

@@Kinarp You're very welcome and I finally purchased my machine approx two weeks ago. Your instructions ROCK! Thank you for your help so much. Keep up the great work!

[@nicolebalian]

This helped me so much! Thank you😁

[@chillin2150]

Ty so much fir this video!! Im a newbie!

[@lyndaperry2224]

Thank you this is very helpful for me..

[@amierichan1428]

I just got this machine. I have it threaded, but haven't actually tried it yet. The advice about setting it at number 2 is very helpful, I will try that, first. My question is, can you embroider the edge of fabric, say, the edge of a shirt, fancy buttonholes (I downloaded the design and put it on a thumb drive)? In other words, the fabric will not be fully held by the hoop, because you are embroidering close enough to the edge. Hope that makes sense!:-) TIA for any advice on this.

[@christinebennett3907]

Maybe a pen with the rubber end would be good to use for the screen

[@ricanryker6441]

Very informative thanks

[@Lexerbee]

omg this helped me sooo much! thank you

[@alohaesemanaw9554]

Thank you this is helpfull i need more.

[@ceasiacreates6981]

Great tutorial! My light is not turning orange at the 4th step . What could be the problem?

[@Kinarp]

Did you push the thread back? It should turn orange when you push it. Watch the beginning where I show how to wind up your thread.

[@Patricia312]

Are you going to do anymore "how to" videos on embroidery?

[@Kinarp]

Patricia312 No not at the moment been busy with other things. When I do I’ll post them.

[@alvarozuniga8845]

I love your voice!!!

[@JamesDoylesGarage]

Thank you very much for this. I really appreciate it. I have a jpeg of a company logo I need to make a patch for. What file type do I need to load into the machine and do you know if I can just load a jpeg. I seen someone on an amazon review say you could but it would have to have conversion software built in Wouldn't it ? Thanks for any help you can give my I'm just 13 but I have a business where I have a lot of sponsors to thank. Though Patches would be a good way to do it.

[@ravenlanise6782]

So helpful, thank you

[@faithluttrell8317]

Do you know how to do bigger than 4x4 on this machine I have looked everywhere and no one has the answer to how to do it

[@daniyashoptibay7895]

Hi there! Is it possible to change hook and put bigger size?

[@qeranyo6741]

Thanks your help I have questions how to you download your embroidery software can you explain to me? I have pe535 the same like yours

[@Kinarp]

I honestly don’t know and still researching about it myself. I know you can hook up your usb from your computer to your machine. But, I’m still figuring out what kind of software would work for our machine. I have been a little busy and occupied with other things to figure it out. I know if I do ever find out I’ll surely make a video explaining and showing everyone how to use it. I know that’s not the answer you want. So I do apologize.

[@alternateskies]

how can you get the mouth part #6 to open back up again? I manually removed my thread to change the color and I can't figure out how to get #6 to open back up its closed I can't get in there and loop the thread

[@Kinarp]

Did you make sure you hear like a click when you place the thread in #6? Once you hear that sound. It should hold in place and try to press that #7 to loop and thread your needle. Hopefully that helps.

[@kailashpaul3]

Hi, I have a question How do you interchange colors if necessary for intended project ??

[@Kinarp]

Look to see if they have multi colors on the patterns you’re embroidering. The machine should stop when it’s time to change color. You change your upper thread. Usually they don’t really need to change the bottom because it’s.. I believe a white thread and it’s thin in the stitch. But I haven’t done it myself yet on this machine. I hope that helps a little. And sorry that I can’t be more of a help. I’ve been keeping myself busy these days.

[@dianaalvarenga962]

Hi thank u can u show me again the bottom threaded 😊

[@velmalewis5558]

I would like to know if I can sew as well as embroidery on this PE535 machine?

[@Kinarp]

Velma Lewis Some embroidery sewing machines are "embroidery-only" machines. These sewing machines are solely devoted to doing machine embroidery. They do not do the work of a regular sewing machine. ... They usually have a removable embroidery unit, so the machine will meet any sewing need.

[@Kinarp]

To answer that ?? I don’t think PE535 sew like a regular sewing machine does. But, only does embroidery.

[@jasminechavez6023]

What if your design is multiple colors ?

[@brisonstrem5614]

how do get red light to go off when sewing after you put foot dow

[@Kinarp]

Hmm… it should go away after you put the foot down to sew. Did you do everything before you begin to sew. Like thread both bobbin? Also did you press the button where the red light is, that button?

[@vernikacephus6323]

Hey do you know how to clean the nesting?

[@Kinarp]

I believe you just opened up where the threads all tangle and just clean it out. And start it over again.

[@vernikacephus6323]

@@Kinarp okay also do you have a video on threading it yourself cause I can’t get the machine to self threaded it for me at all!

[@Kinarp]

Hmm 🤔 thought I’ve show you in the video how to thread it.

[@chantellmendez]

Can you use any thread or does it have to be embroidery?

[@Kinarp]

@@chantellmendez I believe you can use any

[@Kinarp]

@@chantellmendez I believe you can use any

[@waltertimol5921]

Can you tell us how much the price of PE 540 535 embroidery sewing machine? I like it.

[@Kinarp]

Ummm I really can’t tell you. But I got my PE 535 for $300ish. And the bf bought it for me, for valentine’s Day. So I can’t give you the exact price, I’m sorry.

[@rejebeek2926]

Thank you sister❤️

[@iluvmesomehim92009]

You did a marvelous tutorial.. can you add extra hoops to this machine

[@Kinarp]

J Coleman Thank you! I’m quite not sure, maybe you can if you find a program for it on the computer. And make it as two or three embroider design depending on how many you want. In one design. I haven’t mess with this machine for awhile. And I don’t know any program for this machine either. I’m so sorry.

[@roschelletillman6536]

I couldn’t get the bottom to thread through

[@Kinarp]

Roschelle Tillman did you turn the round wheel, like how I did? To pull the bottom threads up to the top? It’s how you would to a regular sewing machine.

[@GorgeousGangstaaa]

What if my bottom thread isn’t coming up?

[@Kinarp]

Did you turn the knob on the side of your machine to bring it up?

[@oliviasinternshipvlog2783]

THANK YOU SO MUCH!!!!!!

[@ashleywest326]

Mine never turned orange. I pushed the bobbin over and it stayed red. Is my machone broken?

[@Kinarp]

ashley otto did you make sure your is foot up? Press that needle button. Where the light is at. Next to the scissor button. Then push your bobbin back to thread it. The light such turn orange now. Let me know if that works?.

[@ashleywest326]

@@Kinarp it wasnt the foot, I just pushed the bobbin over before turning the machine on and it was confused.

[@Kinarp]

ashley otto oh ok but does it work now for you?

[@ashleywest326]

@@Kinarp yes. i was just doing it out of order. once I did it in order it worked perfect

[@Kinarp]

ashley otto ok that great to hear it’s working for now.

[@theuonly9315]

I’m having problems with my light not turning orange

[@Kinarp]

What’s The Hype are you rewinding the thread for your bottom thread? If so did you push the thread on top to the right, before you start rethreading your bobbin? That’s when the light turns orange if your retreading your bobbin.

[@ada7449]

Do I need the cut away paper

[@Kinarp]

I use cut away stabilizer and yes you’ll need that when you are embroidering. The cut away will support the stitches not only during the embroidery process itself, but during the lifetime of the garment as well.

[@mainlek3971]

does this have automatic thread cutter?

[@Kinarp]

Hmmm.. try going on the settings menu on your screen. If there’s a scissor icon? Press ok then there should be a on or off opinion to set the automatic thread cutter. See if that works.

[@SersiSus]

Followed step by step and pressing number 9 doesn’t do anything .. :/ so frustrated

[@Kinarp]

Is your footer down?

[@SersiSus]

@@Kinarp no

[@Kinarp]

Try putting it down and see if you can thread it after that. Make sure you cut it before pressing it. I hope that’s what we are talking about.

[@SersiSus]

@@Kinarp it doesn’t loop..I tried doing it when the footer is down and up and it just doesn’t do anything :/

[@Kinarp]

I wish I can see what your doing to help. And make better Suggestion. I’m sorry I’m not much help ☹️. I haven’t touch this machine since I have made this video. Been super busy with other projects.

[@francealance]

My light staid red after putting the thread all the way up to 4

[@Stazziee]

Why does the needle break ?

[@Kinarp]

Because I had my on the wrong intensity. When I first bought mine it was set on 4. In the video I show you how to test your machine and pick the best for your machine. So your needle doesn’t break. You just have to set your intensity correctly.

[@Stazziee]

Thank you for responding :)

[@Stazziee]

Do you know why my PE353 needle doesn’t want to go full up? I’m not sure what the problem is :( although it can all the way down but not all the way up, it stays in the middle

[@Kinarp]

Hmm.. idk did you try turning the round knob on the right side. Turn it to see if it go up more.

[@delete6453]

bottom thread should not be brought through the top before embroidering.....it is automatic and locks itself on first few stitches. please read manual!

[@Kinarp]

🤷🏻‍♀️ I just thought it was like a regular sewing machine. I’m very new to this machine. And I’m not much for reading the manual. It was already confusing trying to read and figuring it out in the process. I’m still a beginner. It works finely. And ok!

[@pamdoiron3146]

This would have been awesome, if you didn't have to hold your phone while you were doing it. You need to set up a different video camera, other than that, you do a nice video and we would be able to hear you better. Hope you will keep doing videos with improvements on

[@Kinarp]

Pam Doiron Thank you so much on the advice. I’m actually planning on using my camera I have. And set it up on my stand that I also have for it. I do apologize, this was a quick help tutorial. I was in a rush to post it for ppl that needed help on this machine haha. But, next time I’ll post a better video on these help vids. Much appreciation!

[@pamdoiron3146]

@@Kinarp I sure hope you will do another on the pe535. I don't even know what kind of stabilizer to get,nor how to put the material in the hoop, lol. Thank you for answering me. Will be.looking for your videos. Happy New Year.😊🌞

[@Kinarp]

Pam Doiron I believe I show you on here. How to attached the stabilizer and how to start to embroider. And what to do before you begin. The one I use is called cut away stabilizer. It should work on any embroidery machine you have, I’m sure. I hope that helps. I’ll try to upload when I find out more on the machine with a better video look and experience haha. Happy New Year to you also! 😊

[@elidiaramirez9311]

X fa como traducir a espsñol

[@sailymendoza1588]

No matter what number I put nothing comes out good

[@sailymendoza1588]

What is the best thread pattern for designs if you know

[@Kinarp]

I’m sorry, I don’t know. I’m also still new to it and haven’t done any embroider since I made this video on just how to install it. I’ve been busy on other stuff. I probably maybe need to go back and figure stuff out again, but don’t hold me on that. Sorry I couldn’t be of any help.

[@kayestilber9688]

volume was too low to hear

[@Kinarp]

I’m sorry about that

[@nancynewman2027]

Why don’t you spend $10 and buy a stand for your phone?

[@Kinarp]

I have one now, this video was when I didn’t have one.

[@WelcomeHillDre]

Sorry but I’m listening to your tutorial but you are talking very low and I have ear plugs in.

[@Kinarp]

Yeah, I’m sorry about that. Should’ve spoken louder I have a soft voice.

[@sheilaloosemore7283]

It's thread, not string!

[@lkhtown7396]

Is there a specific thread to use that would be best?

[@lilmapleleafy]

thank you for such an in depth helpful video

[@JamesDoylesGarage]

Thank you very much for this. I really appreciate it. I have a jpeg of a company logo I need to make a patch for. What file type do I need to load into the machine and do you know if I can just load a jpeg. I seen someone on an amazon review say you could but it would have to have conversion software built in Wouldn't it ? Thanks for any help you can give my I'm just 13 but I have a business where I have a lot of sponsors to thank. Though Patches would be a good way to do it.

[@Kinarp]

James Doyle Umm.. I’m still new to this, I’m sorry. I really haven’t done much with it lately. But this embroider should come with a USB port. I believe there a program you would have to download. To make your custom logos. I don’t know what kind of program or apps it would be. Or what type of file it is. I think the manual might talk about it, I don’t know. Try doing more research. And after you customize your logo. You would transfer it to your embroider. With that USB port. I’ll try to upload more but, I’ve been busy with other projects. I tend to keep changing project after another. I’m sorry, I’ll try my best to let you know if I find out more.

[@iluvmesomehim92009]

Etsy does it they will send you the patch design to your email.. so you can download it to the usb ( must have an embroidery machine) this machine is compatible with USB port 🤗

[@JamesDoylesGarage]

Thank you very much for this. I really appreciate it. I have a jpeg of a company logo I need to make a patch for. What file type do I need to load into the machine and do you know if I can just load a jpeg. I seen someone on an amazon review say you could but it would have to have conversion software built in Wouldn't it ? Thanks for any help you can give my I'm just 13 but I have a business where I have a lot of sponsors to thank. Though Patches would be a good way to do it.

[@JamesDoylesGarage]

Thank you very much for this. I really appreciate it. I have a jpeg of a company logo I need to make a patch for. What file type do I need to load into the machine and do you know if I can just load a jpeg. I seen someone on an amazon review say you could but it would have to have conversion software built in Wouldn't it ? Thanks for any help you can give my I'm just 13 but I have a business where I have a lot of sponsors to thank. Though Patches would be a good way to do it.