How To Tie A 9X8 Herringbone Knot - For Your Bullwhip, Stockwhip, or Snakewhip

[@rodgreen1181]

Thanks Nick. The bell finally went off.

[@chadrumsey1313]

That’s my whip ! Thanks again, Nick. Amazing quality and whip!

[@NicksWhipShop]

You're very welcome Chad!! Thank you!

[@mosfet51]

Thank you for the mention Nick. You rock.

[@NicksWhipShop]

No problem man, its a great whip.

[@mosfet51]

@@NicksWhipShop I have you to thank

[@Bleiz39]

I love the way an us speaker pronounce my name (Pierrick) that's fun ! glad you like my whip and thx for all your tutorials !

[@NicksWhipShop]

Sorry about that.. I'm so bad with names, I do apologize.

[@Bleiz39]

@@NicksWhipShop no probelm you tell it quite well but it's funny to hear it from american instead of french ^^

[@ddm650]

Awesome craftmanship 👍👍👍👍👍👍👍🍻🍻🍻🍻

[@JustineLh]

Thanks so much for this amazing video, clear and easy !

[@djecpamba]

First: your videos have gotten much better from years past; we’ll done. Doing a herringbone in a single color is challenging but with a bit of practice becomes second nature. You know what side is the base knot going up (away from the beginning standing end) as well as going down so you can use that understanding to split a pair. The only other issue is recognizing what two strands are paired. Recognizing pairs was the most difficult for me. Thanks for sharing. I’ve learned some new techniques from your video. Donald

[@jedharris478]

Thank you for doing what you do, Nick. Was awesome to see my piece in the line-up, and definitely looking forward to working with the whipmakers cord again. 👍👍👍👍

[@NicksWhipShop]

You're welcome Jed!

[@jedharris478]

Looking at a dual set of 4' mini-bulls in the whipmakers cord.

[@wren5291]

No worries about the political ads! However, the timing of an ad straight after of Keith Lemon crafting a festive Mogwai was just epic. I was in tears!😂 No politics, just crafts🧰 And the video was great. Slow, steady and clear as always👌

[@stingU420]

My first time tying this and only my second accent knot made only one mistake but other then that I think it looks good thanks to this video

[@chicotee0]

Great Video Nick. Now you should do a 12x13 I

[@astronotusx]

Thank you many times for your videos. They are so simple that even I was able to plait a few whips according to your instructions! Could you please make videos of other types of knots? Thank!

[@ChristianPsencik]

Awesome video as always Nick! Thank you for featuring my black and red stockwhip with my name plaited into it! That paracord is a dream to use for patterns!

[@NicksWhipShop]

You're very welcome Christian!

[@ChristianPsencik]

NicksWhipShop and by the way great job pronouncing my last name!

[@TroyGarrigues]

What are dimensions of your practice handle and materials used.

[@UstedTubo187]

Hey Nick! These tutorials are invaluable. I'm making my first whip under your guidance! I have a question though. Does this knot cover a larger area heel foundation than the last heel knot video you kept referencing in this video? You gave dimensions in the other video, and I didn't catch any here. Somehow my heel knot foundation is a bit larger in diameter than the one you measured in the last video (by about 6mm) and I was hoping the knot in this video might provide better coverage. Any advice? I am hoping I don't have to remove the foundation and start over. Thanks dude!

[@UstedTubo187]

Follow up: The knot in this video did in fact cover my foundation quite nicely. Still don't know how this knot's coverage compares to the knot in the other video referenced in this video, but it did the trick for me. Video was easy to follow. A word of advice to beginners, definitely heed Nick's advice when he says not to tie it too tightly as you make your passes. If you wind it too tightly, you increase the risk of poking through a previous strand if you can't easily move the strands apart to fit the needle between them. You can always tighten up afterwards if need be. Thanks Nick! Now I have to figure out how to wax this thing!

[@DrMurdercock]

3:43 above the "J" in the name, in the wound up part, it looks like a couple gloss stripes mixed in the matte stripes, that is seriously bad ass

[@waynepryce3462]

Very informative

[@realholyrosaries]

When you buy whipmakers cord does it come gutted ?

[@NicksWhipShop]

Yes.

[@indianalopez8327]

Awesome can't wait to try this

[@gillvision646]

I get my paracord from where you do but yours always seems to behave better than mine lol... yours will just sit there if you tie start a belly where as mine wants to slide down...

[@briancorbin9680]

1 - You are the Bob Ross of weaving! 2 - This would be a NIGHTMARE with a single color.

[@quietrioter]

Challenge accepted

[@hiroprotagonist525]

Hey Nick, nice to have you back! Question; since a lot of the high-plait-count comes as a result of paracord's width, has anyone ever thought of trying to develop WIDER paracord? I'm thinking if you had some wide (6-7mm), medium wide (9-10) and really wide (13-14mm) paracord, you could get a lot closer to how leather whips are built, minus the bolsters... I don't know how difficult it is to get suppliers to make different types of paracord but if it's not a huge deal, I'm thinking why adapt the construction to the medium if you can simply change the medium? Thoughts?

[@mobi9l823]

Perhaps sinkercord would work

[@NicksWhipShop]

Hello Hiro, definitely an interesting idea. As mobi mentioned, sinker cord is around that size and I believe there are different diameters. The only problem I can think of would be ending the bellies. I don't think you could get the taper to end very small. Worth a try though!

[@hiroprotagonist525]

@@mobi9l823 Sorry, what's sinkercord? I'm a leather guy so these materials are unknown to me.

[@Евгений-т8ю7с]

Nick, hello from Ukraine🤚. Please tell me the length of the cords and the number of layers for a 4-inch bullwhip. I'll be very thankful. P. S. I already made one six-foot whip thanks to your video, but there was a problem with the diamond plat, now I have mastered this plat and started making a second whip.

[@cretintime]

Hi. I've followed your various tutorials on making bullwhips and they've gone very well. Although one problem i'm having is when i'm plaiting over the core strand just after the end of the second belly in 5 or 6 plait the whip becomes flat rather than round. any idea what could cause this? Thanks for the videos!

[@NicksWhipShop]

Probably plaiting over the coreless paracord is doing this. I would recommend rounding out the core strand if you can by running your fingers down it and creasing it in the opposite directing to round it off more.

[@tylerdolejsi2857]

love The vides

[@reinhardgiezing5676]

Theparacordstore doesn't ship to South Africa so that is kinda bad. I still love your videos though.

[@bleachkowalski1276]

7:35

[@Tiaan2303]

Do you sell these whips?

[@NicksWhipShop]

Yes, please visit nickswhipshop.com.

[@jocelynbarayugabarayuga8800]

Hi I can't make it because I don't have enough money

[@NicksWhipShop]

Sorry to hear that.

[@wren5291]

Check out Adam Winrich's channel or Connor Hack at CaliberWhips for their budget whip tutorials. You could still make a very functional fun whip🙂

[@VladimirDorl]

👌👍👍👍👍

[@olis2059]

Cool

[@Thea_MojaveOutliersWhipmakers]

Incidentally, if you're trying to tie this knot with a leather strand, there are two widths of strand to choose from: 1.) Too wide. 2.) Too narrow. That's it. That's all you get.

[@Thea_MojaveOutliersWhipmakers]

QUIT LAUGHIN', you think I'm not serious!? I'm serious! As a. *snicker

[@NicksWhipShop]

Haha! You are correct Thea! 😆 I've only made a few leather whips in my life, and it is such a challenge. I hope to someday be able to make them as well as you do.

[@Thea_MojaveOutliersWhipmakers]

@@NicksWhipShop Awww, that's nice! Taker yer time, take yer time, don't need to be in a big hurry, now... lol!

[@ИванПетров-т5е9т]

А МОЖНО С ПЕРЕВОДОМ НА РУССКИЙ ЯЗЫК ДА КРАСИВО НО В РАШКЕ С БОРОКОРДОМ ПРОБЛЕМЫ