How To Tie Beaded Paracord Knife Lanyards

[@TheWeaversofEternity]

WOE Paracord Store Is Launching Soon! ▶ www.paracordweavers.com/ GET MY FREE EBOOK ▶ www.weaversofeternity.com/freebook

[@OwlskiTV]

<a href="#" class="seekto" data-time="318">5:18</a> when he gets to actually tying the knot.

[@HaxionChannel]

Thank you

[@a.f.carmona3484]

Thank you again so much - I’ve been going back again and again whenever I need to install a new paracord lanyard to my knives - thanks again and best wishes go out to you 🙏🏽

[@SebastiaanDeVos]

Great lanyards! Last summer i bought my first knife (at age 33 haha here few people carry pocketknives), a CS Recon 1 mini and i still have to make a nice lanyard for it. AND i have found a paracordshop in the Netherlands that sells the Schmuckatelli skulls wich i realy like. So thank you for the inspiration!

[@TheWeaversofEternity]

Sebastiaan de Vos Hey Sebastiaan! That's awesome that you found a shop that sells the beads. They're great products for sure. Glad I could inspire you! Thanks for watching and commenting as usual my friend!

[@BoemdeBrubap]

Any chance you sharing the name of the shop? As a dutchy to dutchy? :-)

[@DVS040]

BoemdeBrubap www.paracordshop.nl have fun!

[@BoemdeBrubap]

bedankt man!!

[@johnestes9047]

Nerdism_EDC

[@sharonah2038]

Good tip , removing a couple of strands to fit the bead .. best wishes Sharona

[@eddieking2976]

My brain always gets tied in knots watching these videos. But I am slowly learning. Thanks for sharing.

[@joseg.rodriguezramirez943]

Really Thanks!!!!! Great tutorial!

[@CaptStevo]

Great tutorial. Thanks!

[@TheGraveyardTapes]

Subscribed and thank you for an awesome tutorial, my buck knife needed something like this.

[@JoeLopez]

Great tutorial. I'm new to these paracord lanyards, learning to make some for my gear.

[@TheWeaversofEternity]

Joe Lopez That's awesome Joe! Thanks for watching!

[@itmightmakeitbetter]

Thanks for this video!

[@trevorhill9870]

Thank you for the help!!!

[@crosscaddie]

Thank you !

[@zacandmillie]

I tried the 'ol wet your fingers and quickly smooth the end trick. Yes, well my wife laughed when I yelped as I blistered my thumb and forefinger. Think I'll use the lighter itself to flatten the hot end next time.

[@TheWeaversofEternity]

Zac+Millie+Buddy LOL, I'll have to start posting disclaimers at the beginning of my videos! Be careful in the future... ;)

[@runetorshammare2972]

Just what i've been looking for. Thank you. My Manix 2 xl will be pleased!

[@TheWeaversofEternity]

You're welcome! The Manix is a great knife!

[@costradelmal]

nice lighter there

[@john1972goh]

thanks for the video

[@notmillionaires]

Love the snake bead snake at the top. I always do 2 snakes bead then diamond. Also liking the bead 2 snakes then diamond you're using. Making a little pouch zipper pull now and gonna use this setup. Appreciate the content.

[@felipesalasanell8648]

muchas gracias por una buena espricasio

[@Mehdeenuh94]

These lanyards work very well for blades that have the Emerson Wave feature!

[@the_real_treezus]

gonna make one of these

[@218cblue]

Nice job bro'! Great lanyard!

[@عزفالجروح-ص8خ]

Very good

[@EDKG]

Put in an order for a couple of the Fang skulls after the last time you showed their work, they do some very cool stuff

[@TheWeaversofEternity]

EveryDay Knife Guyy Awesome! Schmuckatelli makes great beads. Thanks for watching and commenting!

[@RompRat42]

great vid, thx for making them!!

[@hancockbrewer1465]

Great video as always my friend.

[@TheWeaversofEternity]

hancock brewer Thanks my friend! :)

[@caiosantosrds]

Does It looks nice using a leather strip?

[@joebotz1243]

Good video. I'm still trying to figure out how to do this project I'm working on. If you're going to use the first knot in this video.. how would you go about attaching a bead to the loop? It almost seems easier to cut the loop end and then tied back together. If you have a chance let me know what you think. I really do like that Barrel knot just difficulty bead placement

[@joebotz1243]

kzbin.info/www/bejne/mZPWXoSYYtdsbpYsi=SwSoVWz_3Lr5ftl-

[@raystupka3823]

Great video. Only issue I am having is moving the diamond knot up. Don't know what I am doing wrong.

[@dseednorwayn47]

coolone and thanks forthe knot tutorial

[@TheWeaversofEternity]

dseed You're welcome, thanks for watching!

[@AMG-ug8ci]

Hi where did you buy the 18k skull, I like your style. Thanks

[@ddwchamp]

Where is the best place to order the "Skull" and beads? I am new to paracording.

[@jeffdur1330]

If only I had the patience

[@andresjaimes7848]

Would this work on the rat model 2? I feep like the hole is way to small

[@thefathomsofforteana6624]

Awesome

[@yoinky]

Im sorry if i missed this somewhere in your vid, but about how many feet of cord did you use for the entire lanyard? Great channel btw

[@TheWeaversofEternity]

At 1:30 I mention it's about 2 ft. Thanks for watching and the kind words!

[@kennymason3518]

What knaf is that bro

[@jacobaddotta]

Anyone ask where he got the red and black colors paracord? Looks great, nice vid thanks!

[@TheWeaversofEternity]

+Jacob Addotta (21Jake21) That color is called Licorice. You can find it on paracordplanet.com

[@yanlafleche]

hey nice video. starting to getting where I want with lanyard knot thx. my only problem is I own a microtech utx-85 and the slit for the lanyard is not positioned like other. can you help me out ? cause every one I make doesn't fall down normally cause of the weird place where you have to put your paracord. hope my English is not so bad and that's you understand what I meant. thx

[@xwwry]

What knives are those? I really like and enjoy your vids. I also would love to see more knives reviews. Greetings all the way from Poland. XD

[@TheWeaversofEternity]

Ksawery6932 Those knives are the following: Burchtree Bladeworks Midtech V1, V2, and the David Mosier Crossfire Midtech. I haven't done many knife reviews in a while, but I have some I've been meaning to upload. Greetings from Canada! :D

[@ItsRobNoir]

The beads closer to the end of the knife, are those knives back spacers or are they just casual beads?

[@TheWeaversofEternity]

robert svart Those are actually spacers, I got them from Chris Reeve lanyards.

[@ItsRobNoir]

good to know, might order some day they look awesome thx for the response!

[@poetikdcyple1960]

Can this also be made into a keychain or rear view mirror decoration?

[@TheWeaversofEternity]

+Poetik Dcyple Of course!

[@howardmanley3388]

Where do you buy the skulls at?

[@hoosky76]

Your videos are awesome man, thanks for sharing. Are you on Facebook or Instagram?

[@TheWeaversofEternity]

+hoosky76 Thanks! I'm on both under Weavers of Eternity.

[@shk216]

Is the ona tiki bead with black pewter finish?

[@shk216]

+shk216 camera is throwing me off.. perhaps it's brass ox?

[@TheWeaversofEternity]

+shk216 If you're referring to the skull it is the 18k gold plated one

[@shk216]

+The Weavers of Eternity Paracord Tutorials Not the Skull one. The Ona Tiki Bead shown at around 20sec in to the video.

[@TheWeaversofEternity]

Sorry for the late reply, that one is a black oxide finish.

[@SnoweyMist]

don't know if you will see this or not but I'm wondering if I can do this with a leather bootlace or something similar or should I look for a different method?

[@TheWeaversofEternity]

+Hugh Finch Leather lace can work too, but it's best if the leather lace is round. Square lace tends to get tangled and twisted.

[@SnoweyMist]

+The Weavers of Eternity Paracord Tutorials ok thanks for the reply

[@JohnBarrow1961]

Are those torch style lighters best for this paracord work? If so, do you recommend a particular brand?

[@TheWeaversofEternity]

+John B I find jet lighters the best. I like being able to control the direction of the flame. I don't have a particular brand in specific that I can recommend though.

[@allanmarquez10]

were do you get your knifes from?

[@TheWeaversofEternity]

+allan marquez On the USN forums.

[@نورعمري-س8ح]

sgdygykpj

[@LoverBoy-ks9qh]

+The Weavers of Eternity Paracord Tutorials aren't the knifes you use in the video illegal in the uk cause they can open using gravity or a spring?

[@blanex1]

hi,have you ever seen schmuckatelli's pre made lanyards with there skull on the end, i think its a box lanyard,i was just wondering how they get 4 strands though the skull ! i did it once,but i forgot how i did it ! and as you no 4 strands is vary hard,thank you.

[@TheWeaversofEternity]

Blane Biondolillo It's most likely because they gutted the paracord, so it's thinner.

[@kaledore6538]

We're do u get ur beads from

[@prongATO]

www.schmuckatellico.com/

[@kozmozumer3720]

How do I make the purple/maroon color one on the front of the thumbnail?

[@TheWeaversofEternity]

I showed you in this very video. It's just that that one has an extra bead on it. It's the same as the red one.

[@barzilaiduran8398]

Me encantan todos tu tutoriales y los hago aunque no tengo el material que utilizas los adaptó a otros cordones e hilos etc serías tan amable de poner subtítulosen español para poder entender lo que dices muchas gracias att Barzilai Duran desde Ecuador recibe un cordial saludo

[@georgesa4214]

which knives are those?

[@TheWeaversofEternity]

+George daboss Those are the Burchtree Midtech V1 Dao, Burchtree Midtech V2, Mosier Crossfire Midtech.

[@jtscustomcutlery317]

Anybody know what size diameter hole that bead is?

[@TheWeaversofEternity]

+Cro Van 3/16" or 4.7 mm

[@jtscustomcutlery317]

+The Weavers of Eternity Paracord Tutorials thanks for the info. This will help me out tremendously:)

[@paboisselle]

I was getting bored w/ the cobra weve. thnxs!!!

[@TheWeaversofEternity]

+Philip Boisselle You're welcome!

[@vladislav6151]

Quite expensive for little objects like that

[@TheWeaversofEternity]

Vladek petrov They're actually quite reasonably priced imo, but then again I've seen really nice beads that go for $50-$100!! O_O

[@vladislav6151]

The Weavers of Eternity Renaissance If they have svarovski for eyes it's reasonably. They do look good but still are microscopic pieces of metal.

[@kreganufo]

Nice knot. But the introduction is so long and the make a knot is so fast for learn.

[@hunterdeers1]

Why the vedio too much fast you can take another week Regards nice table

[@TheWeaversofEternity]

You can slow down the video in KZbin if it's too fast.

[@StEEVOxxKNIEVO]

REDA THIS BEFORE YOU START!!!! JUAT START OFF WITH 2.5 FEET IF YOU HAVE MAN HANDS. I had to start all over after getting to the end because I couldn't tie the last not

[@Bluesidian]

LOL he said Schmuck lol

[@optimusprimesqrt6]

Can you get any more long winded?

[@francisconavarro4532]

Mate the way you cross over ends you are doing it instinctively go slower and explain when you crossing over explain step by step remember it's for Dummies that have no idea, not having a go at you, cheers happy teaching

[@garysumlin8355]

I'm falling asleep hurry up

[@normcote270]

Too fast, slow down!! If I were giving you guitar lessons that's what I'd needcto do. I watched this over 20 times and you spent more time showing the knife and the two strands coming from the knife than the critical turns and twists of the knot you tied. Going to another site, sorry but I'm done here.

[@aprilezell3784]

Video was good but could have been 3 minutes shorter for all the time you showed the ends of the paracord against the back of your hand. If people are THAT slow, they can watch the section again... Lol!