A quick video showing a technique for how to tie rebar. @hausplans #build #howto #tierebar #rebar #diy #construction #contractor #hausplans
Пікірлер: 275
@tonyyglesias77842 жыл бұрын
Built my garage, used plastic quick ties. No issues at any connection... Inspector loved it...
@hausplans2 жыл бұрын
I’ve seen people do that as well
@ralph54502 жыл бұрын
That's how I close my bread bag
@eldios36662 жыл бұрын
😂 when union boys argue about work it brings me peace knowing they don’t all drag ass around all day
@mr.yeast5billion9102 жыл бұрын
You'll never hear road workers having that argument though lol
@kaindiaz48782 жыл бұрын
@@mr.yeast5billion910 gold man gold they'd be on some "what? yall guys tie we usually scrap the rebar and buy beer with it"🤣🤣🤣
@joels25172 жыл бұрын
Cheaper to buy a roll of wire and use pliers?
@hausplans2 жыл бұрын
I’m not sure I know that’s how some of the commercial guys do it. The ties I buy are really cheap though
@georgebeauchamp16902 жыл бұрын
@@hausplans meaning they are POS! Get some wire and do it like a rod buster!
@githucalias9212 жыл бұрын
Man why pliers u can use the same tool
@hannahmay54612 жыл бұрын
Slower
@mikenormandy9250 Жыл бұрын
I love watching the rod busters tie all damn day long! But def NOT with this method! Pliers and your rod reel!! I see guys use linesman style pliers (with spring loaded handles and one handle is curved for grip) and front end style nippers! Pretty sure showing up to the job with this setup is the equivalent of me showing up to a job site with one of those automatic wire strippers!
@willywombat20872 жыл бұрын
Johnny homeowners lol them quick ties very costly always break or not tight enough
@rickschermerhorn23155 ай бұрын
That's because you don't know how to do it real foundation guys get them all tight and break none in fact Donnie or Tina were so good at it that they break none over the whole house
@rickschermerhorn23155 ай бұрын
You're wrong
@alexm657015 күн бұрын
Those “quick” ties are a lot slower than using a spool of regular tie wire
@CaLilife5622 жыл бұрын
Great info! I will definitely be using this method on my next T&I project
@MacGatesStudio2 жыл бұрын
I appreciate you assuming that I already knew how to tie rebar. However I do not, but thank you for teaching me.
@sorsaasefa7660 Жыл бұрын
I was lucky enough that my first job used an electric rebar tie. Point and tie. We ran out of the rolls that go into the rebar tie and tying them by hand wasted an extra 2 hours for us. Now I can brag in the future like an old head and tell them I tied rebar with my bare hands back in the day😂
@hausplans Жыл бұрын
😂👍
@goreyboggs Жыл бұрын
He is not a rodbuster I’m guessing. Rodman throw the bag ties off the side of the bridge and put on a tool belt with Pliers, Scaber & Reel. 😎
@rickschermerhorn23155 ай бұрын
Guess what all of you know it alls this guy is doing it absolutely perfect and how do i know?????? Ive done at least 775 foundations around here so ive probably done that 75,000 x have sny of you self proclaimed experts ever built more than 2-3 foundations in your whole life this guy is perfect thats the way you do it compare your no foundations built life with .my 775 you have no right to even comment on ehat hes done
@mikeyhemingway91202 жыл бұрын
They got things called "yoyos" and you pull it once and it tightens it perfectly every time
@shauntilley6730 Жыл бұрын
Bag tie
@mikeyhemingway9120 Жыл бұрын
@@shauntilley6730 huh
@dougedwards80229 ай бұрын
Don't pick up 14 ton 8ft Dia 80ft cassions built with those,,,,it might not make it to the hole,,,😂😂😂 an if your told to do it or else chose the or else
@oneilljames18 ай бұрын
Idk ive done both ways. You should load a bunch of ties all the way onto the tool thru one loop, and hold them in your palm. Then you pull one out of palm, thread, hook the loop and twist. Ready to do the next one
@rickschermerhorn23155 ай бұрын
Screw that
@davidebevilacqua25752 жыл бұрын
My dad use to use a pair of thrusty knipex pliers and a coil of wire, he was super fast, no need for there tool
@samnass Жыл бұрын
KNIPEX makes concreters nippers. I find them faster and more comfortable than pliers...
@dougedwards80229 ай бұрын
I likem a new pair of klien 9 st213 no spring skin the handles then watch out for weld flash😂 nothing but a blur don't try to watch me because it'll blow your mind
@ekermit33262 жыл бұрын
I'm and electrician and I did it just helping a buddy out and I did it quicker than that just cutting a piece of tie wire off and Crossing it and then twisting it
@zachcrowl85046 ай бұрын
I’m a mechanic so don’t get mad at me for asking but how would safety wire pliers work for this?
@ig_omar42882 жыл бұрын
Get some linemens and stop trolling us haha I use tie wire every day like the next guy on here
@rodneybeckstedt60322 жыл бұрын
I aint used a twister in years, kinda miss it but hated the travel
@first_last01 Жыл бұрын
came to the comments to be told what he's doing wrong and wasn't disappointed
@hausplans Жыл бұрын
😂😂
@scottedwards3403 Жыл бұрын
He’s not necessarily doing it wrong, this is ok for most residential pours, commercial or ‘special’ use concrete require saddle tie (in my state). I was a rod buster for a long time and thing he’s doing fine
@ksconstructionskill2265 ай бұрын
Good technique❤
@hausplans5 ай бұрын
Thanks 😊
@MRYOUDONTKNOWJACK2 жыл бұрын
I'm all my years in construction I've never seen a rod buster tie bars with this shit.
@bmo14lax2 жыл бұрын
Ok
@dontrompas13122 жыл бұрын
Same
@rickschermerhorn23155 ай бұрын
That's too bad are you a rod buster? No you're not
@MRYOUDONTKNOWJACK5 ай бұрын
Even if I was I wouldn't use this shit
@derreckmoran10983 ай бұрын
I’m a Rodbuster of three years and have never once seen or used this tool looks gimmicky af too
@joemcguirk8522 жыл бұрын
Would love to see him do this on a 20,000sf deck lmfao
@rickschermerhorn23155 ай бұрын
So what have you
@MrCoventry198610 күн бұрын
I use 250mm knipex, always done the job for me.
@xdjuicyclap67212 жыл бұрын
Wire and pliers, im a bit slow at it cause we only did it at school, but you get the hang of it or you got the guns, thats fun. But yes, paur of pliers and roll of wire.
@hausplans2 жыл бұрын
I would like to by a rebar tie gun
@Suspect0022 жыл бұрын
could you hypothetically put an eye hook in a drill and use that?
@hausplans2 жыл бұрын
I think it would be easy to over twist to break the wire with a drill. It takes a little while to get the feel. Not enough twist and it’s lose, too much in the wire breaks
@michawolski25842 жыл бұрын
@@hausplans what about the torque setting that every drill has built in?
@Sam-ls6sl Жыл бұрын
@@michawolski2584 that would work
@MrRebar159 ай бұрын
Local 15 Ironworker/retired, grew up in the business, well said.
@hausplans9 ай бұрын
👍
@alexnelson61962 жыл бұрын
I never cared for pigtails. Always used a saddle tie for strength and a Max tie gun for speed. Well worth the money if you’re tying lots of bar.
@MichaelZorn2 Жыл бұрын
A snap tie works just fine. Not all ties need to be done for strength. A saddle tie is good for walls. A saddle with a snap for template bars.
@jeremytrapo27152 жыл бұрын
We use that for fences
@TTCS Жыл бұрын
Fast way to get laughed off a commercial job. Neat tools though
@elischultes6587 Жыл бұрын
Put that Whirlie Bird down and slowly walk away. Just using snap ties like that aren’t as strong and stable as a saddle or a crossed saddle tie. Get a reel for a spool of wire. Get your bars in place tied with crossed saddle ties then go back through and do the snap tie to get your tie percentage for your bar inspection. Tying 2 bars over #5 these ties aren’t long enough. Besides you run out of these quickly. If you need to hold something plumb tie it into place.
@Toxikyle12 жыл бұрын
Lol on every single video of people trying to show a tip on trade work, there just so many people in the comments about how they’d get fired and that this way is shit compared to their way.
@hausplans2 жыл бұрын
You aren’t wrong 😂
@slash.98828 ай бұрын
rebar tie gun is the way to go
@josegutierrez74572 жыл бұрын
That's not how you tie rebar
@raymonddoran30232 жыл бұрын
Thats one way a double saddle works better stronger but its good
@alemalvina76242 жыл бұрын
Is better to pass the wire again forming the inginite symbol grabs rebar better
@apyorick2 жыл бұрын
When you take forever prepping ties and your ties fail to make it seem like you are fast.
@devin39692 жыл бұрын
I’ve never seen it done this way before
@stephenking97898 ай бұрын
wow, ive never knew this and been twisting the rebar around eachother
@christhut81402 жыл бұрын
I love everyone talking shit about bag ties and twisters. Many small residential companies still use them. You only really see pliers and reels or tie guns on bigger sites or commercial/industrial
@hausplans2 жыл бұрын
We only tie rebar a couple times a year, I could see if that’s what you did every day using pliers
@richard4169132 жыл бұрын
Use actual tie wire and some Kliens….be a man!
@Mattnoble808 ай бұрын
That’s my technique also, did you have Mr. Jones as your teacher too?
@aNtLoKo90650 Жыл бұрын
Those are nice tie wires and I can tie alot of steel with those babies 😊
@mds63872 жыл бұрын
I've used pliers. I'll keep this technique in mind.
@hotpotato32 жыл бұрын
First up .... That is the dumbest way too tie rebar.. Mind you...we were up 50 feet...
@douglasfick4817 Жыл бұрын
I learned 2 things, how to do this and what that tool is for
@michaeljimenez83992 жыл бұрын
$10/hr ties, with pliers and reel $25+\hr
@neilspires725910 ай бұрын
It's much higher now.
@johnrobinson80272 жыл бұрын
Only a novice ties like that. A saddle tie is how to really tie rebar.
@thatdude60452 жыл бұрын
Figure 8 is my prefered method. Its same as a saddle but one side crosses
@jancloddlafront91852 жыл бұрын
KZbinr are 14 on average... they teach as they learn!
@Mark_Mark_Mark_Mark_Mark2 жыл бұрын
🤣🤣🤣🤣🤣🤣🤣 saddle tie or figure 8 a matt you'll work till smoko then get told to go home. This tie is fine. I use nip and reel but when using a twitch I like to hook one loop and fold other end over the tool. Tighter and quicker tie
@jayzayas34252 жыл бұрын
Bro Milwaukee makes a tool for that who the hell still does that
@hausplans2 жыл бұрын
Actually Milwaukee does not make a rebar tie gun. If they did I would but buy it!
@jayzayas34252 жыл бұрын
@@hausplans I’m going to find it for u right now!
@jayzayas34252 жыл бұрын
Yea brotha not Milwaukee completely right I meant makita ! They just came out with it check it out
@christhut81402 жыл бұрын
Many many people still use bag ties and twisters. Mostly small residential companies
@savoielvis12 жыл бұрын
i didn t know....thx !!!
@whytry7776 ай бұрын
They have new ways now that's old school
@hausplans6 ай бұрын
It is
@costcomuffin9322 жыл бұрын
That’s how my dad taught me
@hausplans2 жыл бұрын
Cool👍🏻
@abvoltbolt2 жыл бұрын
to do it faster use your foot as the anchor
@natepotter7776 Жыл бұрын
Tried this with my buddy once shit sucked. I always use my wire wheel and klines lot faster
@chainjail4834 Жыл бұрын
the wire came like that? where's this from?
@Gaoyujie-er4bc5 ай бұрын
Nice, we have glassfiber reinforced rebars and production line for sale 🥳
@hausplans5 ай бұрын
Very cool
@Gaoyujie-er4bc5 ай бұрын
@@hausplans Thanks friend🤣
@Gaoyujie-er4bc5 ай бұрын
FRP REBARS AND MACHINE
@user-oy8or9ch2h8 ай бұрын
Where do u people come from
@robertryan4485 Жыл бұрын
He's a real and a pair of pliers it's a lot cheaper sometimes old school things work better or not cheaper I get what you're doing but it's not very cheap she had to make that twice as tight you can wrap two loops around it and thinking it up you do a figure eight you can put around turn on the movement it is those tires are not efficient junk and grew up iron working know all about that I like the new ones if you're going to run that you might just buy an electric baler gun
@DIERKONSTRUKSICHANNEL Жыл бұрын
Nice👍
@hausplans Жыл бұрын
Thanks ✌
@waynevictory52082 жыл бұрын
Reel wire with wire cuts dud . That’s to slow .
@ErnyMntee Жыл бұрын
Fuck that, you’re fired bro
@juniorjr.83132 жыл бұрын
People make videos on anything theses days
@kspekle8 ай бұрын
Hurts my eyes in so many ways Thats takes forever like this
@user-ho3eh5vn3f Жыл бұрын
In general, it is necessary to knit with two wires in order to make it stronger.Hello everyone from Russia, does anyone speak Ukrainian or Russian just wondering?
@Swof992 жыл бұрын
Real concrete guys just use a wire reel and some good pliers. Don’t know what this goofy shit is
@lxcameron406 Жыл бұрын
Get some tie wire and a spool rig with tie pliers and really learn
@josecapetillo6034 Жыл бұрын
If you a rebar mat like that, I don’t think it’ll last with people walking over it.
@CJ-ec7qo Жыл бұрын
Roll of wire and pliers. And only 1 thick!? No 2
@Anonymous_Service_Leaks Жыл бұрын
What kind of lazy technique is this common I’m trying to be actually fast here
@deondaylisan2995 Жыл бұрын
I thats how you tie an iron or rebar in the Philippines .. you'll be a laughing stock 😅😅😅💪😎
@WorkableRouge Жыл бұрын
Most people just use a small set of pliers
@MrAgent47HITMAN47 Жыл бұрын
My boss got that Milwaukee tool that does it it’s great worth the 100s it probably cost
@YourDadsBoyfriend2 жыл бұрын
For anyone that doesn't. Well they still don't need to know, because they will never do it in their life
@Tauwreds2 жыл бұрын
What about with pliers
@hausplans2 жыл бұрын
Some guys do use pliers and the ones that do are pretty fast with them
@slowmoe19642 жыл бұрын
Yes
@mofugga2 жыл бұрын
Ik you'll argue ab the gun, but at the end of the day, if your work isn't overloaded then your probably not doing something right.
@rafaelmonroy74066 ай бұрын
Perfect...now i need to lose 200 lbs 😅😅😅
@peteashby41602 жыл бұрын
Do that and let the real rod busters laugh you off the job
@richardalfaro49332 жыл бұрын
So how do you tie 2 rebars
@hausplans2 жыл бұрын
I haven’t figured that out yet😂
@shawnwilkson87882 жыл бұрын
Use a wire reel
@jamesduncombe72929 ай бұрын
Loop ties 👍🏻
@hausplans9 ай бұрын
👍
@gameover-to8gj2 жыл бұрын
How to butter bread
@JesusSavesRepent Жыл бұрын
You can figure eight these too 🙄 just tie another one in an ‘X’ - we still use lineman pliers and a roll of wire, but this is high speed.
@rickschermerhorn23155 ай бұрын
If you haven't figured it out by now ive got a negative comment for every one of you giving him rude comments because you know NOTHING BECAUSE THIS IS PERCECT
@army22072 жыл бұрын
If thats not how you do it can someone explain how to do it right
@mattweger4372 жыл бұрын
*automatic rebar tie*
@hausplans Жыл бұрын
I want one bad, just hard to justify for how much I tie in a year
@mattweger437 Жыл бұрын
@@hausplans OfferUp?
@Thesac442 жыл бұрын
That’s not how you tie rebar bud. Get ya a pair of kliens and some actual tie wire. If you wanna make a video on how to tie rods like a landscaper then rename this video how to tie rebar like a landscaper
@dylanlaton78098 ай бұрын
Come on dude he's building a small mat for a footing. He ain't bustin bars on a bridge
@gabrielmedrod5 ай бұрын
Y por hacer eso dices que pagan bien?
@jeffreyflynn2805 Жыл бұрын
Haven’t seen anyone use a manual twitcher since the 80s
@f.t.w8645 Жыл бұрын
I don't think that works for a 45m bar or 35m columns
@hausplans Жыл бұрын
Probably not😂
@germacam3498 Жыл бұрын
Get a reel and some cutters like a man lol
@hawkman223872 жыл бұрын
Damn I'd have to do it by hand.
@redman7152 жыл бұрын
Simple until you have to tie 3000 pieces
@hausplans2 жыл бұрын
True
@vetovieraprieto4097 Жыл бұрын
Tengo un tortol rapido i muy sensillo es manual x aora supera a totas lo que ay en mercado
@jeffsprague2967 Жыл бұрын
Lol no that's the way guys that pools builders tie steel. A Iron worker would laugh you off the jod site
@mideyan2 жыл бұрын
wire & hammer faster better stronger
@douglasmichel63612 жыл бұрын
I have boxes of um left over….
@bennyg48502 жыл бұрын
Bullshit you'd be ran of site for this 🤣🤣🤣
@cowboy349wmag2 жыл бұрын
Heck, last slab we did I just got the welder out and welded all the rebar. It was way faster.
@hausplans2 жыл бұрын
Nice
@joebledsoe2572 жыл бұрын
old school.
@michaelkelly7395Ай бұрын
Twisty need not apply 😒
@user-ho3eh5vn3f Жыл бұрын
Хорошо хоть субтитры есть, привет из России
@hausplans Жыл бұрын
Hello from USA, thanks for watching!
@user-ho3eh5vn3f Жыл бұрын
@@hausplans Do you speak Russian or Ukrainian?
@hausplans Жыл бұрын
I do not
@user-ho3eh5vn3f Жыл бұрын
@@hausplans I'm sorry I just asked for the sake of interest
@user-ho3eh5vn3f Жыл бұрын
@@hausplans I wonder if many Americans know East Slavic languages (Belarusian, Russian, Ukrainian)?I'm just interested in linguistics, different languages, their study and origin