How to Tip

A how to video instruction guide on how to select the service cycle on a Hotpoint Washing machine or Indesit Washing machine with the 16 sector dials and can only be used on those post 2012.

[@IndesitWasher]

I've got F05 error on first time when I put on service mode like you. next time i don't had this problem next time

[@charlieestevenn]

It flashes any error code it has had previously after being put into text mode

[@Clocktoys]

My indesit was put into the test cycle but is now stuck in it. Can’t select my usual cycle. Display always goes straight to 1 minute left when I try to select usual programme. Any ideas to fix this?

[@danandlaundry]

1:38 had that the first time with my Indesit The second time and all the other times I put it in service mode it didn’t do it

[@sharlydales1762]

I tried to do a surfise cycle on my washing machine but it came up with f05 on my washing machine is the hot point aquariums

[@whichwasher2007]

F05 is pressure switch fault. But more than likly not draining the water due to blockage somewhere.

[@Yazzino7]

What about Aniston ARMXXF145

[@That1Ray]

Hotpoint Aquarius be like when putting SMode: HOW ABOUT NO YOU NERD (Dishes out F05 error)

[@erikaand5019]

Error/Feher number/Nummer 5(E05): Drain HydroError/HydroFehler(H20): press switch/water level detector Idk try resetting. Weiß nicht probiere zurück setzen.

[@mieleboy96]

This doesn't work on the Ultima s-line range I've tried it on mine

[@Zainwhocamefromspain]

New or old like the one with direct injection? Or one without??

[@user-tb5ge3zy6f]

1:37 Error Code F05

[@user-rv6uh6pe7r]

U have a Pump Filter that's Blocked!

[@whichwasher2007]

No it's not 😂

[@user-rv6uh6pe7r]

Yes it is!!!! YOU HAVE TO FIX IT otherwise it will still show F05

[@specialrepair]

I did it service mode and show display the error code f05 and no sat.how delete error code thanks

[@erikaand5019]

Error number 5: drain issue (eo5) HydroError 20: press switch (H20)

[@user-rv6uh6pe7r]

U have to fix it!

[@whichwasher2007]

No I don't need to 😂

[@IloveMelodie3]

F05 is not draining

[@laundryinthenorthpole8732]

I just tried it in my Hotpoint and it went faster than 1000rpm. I think it was 1200rpm, i'm not 100% sure. I JUST tried it a 2nd time and it came up with an F06 error code?????!!! What is F06 anyway?

[@DeepRinseEnthusiast2002]

Toji George which hotpoint model is yours?

[@laundryinthenorthpole8732]

@@DeepRinseEnthusiast2002 a Hotpoint WMXTF 942

[@TheLaunderetteExplorer_uk]

Toji George it will only go to 1000rpm Chances are as the drum is empty it just sounds faster! My machine is a brushless one - you can view my machine on my channel doing this test a few months back! Should sound very similar..

[@That1Ray]

F06 is when the door lock fails

[@jackiemyself3504]

1:38 The FO5 Error Code

[@tamito9298]

What is better Hotpoint, Indesit or Whirpool ?

[@Mangowine000]

hotpoint

[@tamito9298]

@@Mangowine000 why ? Hotpoint is a worst stuff as everybody knows

[@Mangowine000]

@@tamito9298 indesit can give u error codes after even than 3 weeks, whirpool,breh its wrost than Indesit. except some models,but all are bad

[@Zainwhocamefromspain]

​@@tamito9298MY Hotpoint Lasted 12 YEARS.

[@user-mo9gb3ts7l]

​@@Mangowine000İndesit

[@IloveMelodie3]

Not draing

[@itz_mah001]

Why is this video buging so much

[@whichwasher2007]

Buging? What's Buging?

[@michaelgreen4585]

A stupid machine dial on off on off on off on off on off ridiculous