How To To Program A 2008-2016 Europe-North American VW Tiguan Remote control key Using Autel 608 #1

VW when adding a key is the same as all keys lost. You need a working key to begin but you must include that key when programming, so when asked key 1 is always your working key, then add as many as you like, if adding 2 you select 3 when adding 1 you select 2. The first key needs to be relearned back as key 1 or you lose it and have to do it again. We learn as we go but with VW be careful if you erase all keys by accident then you must read eeprom on the instrument cluster to add keys back.
vidIQ badge

[@jorgevives2632]

Great video do you know if it's the same process for 2018 vw atlas .

[@ruslantretyak9480]

Thanks !!! Good job 👍

[@adamsny6605]

It's great that you show everything. We're all learning. Regards Adam from Poland .

[@jeffh3938]

Hello I think before i watched a video for you programming VW car I don’t remember it and u chosed 2 when u were learning the key and this must be the same in this case, anyway ur videos still the best for teaching others Thank you

[@BestCarFixes]

Thanks for the info!

[@abuhamzahalmasry5627]

good work as usual my brother .ma sha'a ALLAH

[@HDAB357]

Hello , Thank you for the vidéo. its possible to learn the wirred xhorse key (red bag) ?

[@alazarbeyene4428]

I purchased Autel 508 and a customer brought me a 2012 Tiguan friends discourage me not to do Euro cars but your videos makes the procedure simple I am going to try it,should I use OEM or aftermarket keys thanks

[@ezeldeenkhreisat7298]

Autel is a strong company in European cars

[@afrankhan8615]

Very useful video sir 😊😊

[@BestCarFixes]

"Thank you for taking the time to watch the video. I'm glad you found it useful."

[@ferrywongsodiwirdjo2871]

Thanks fot the info bos

[@BestCarFixes]

No problem 👍

[@ezeldeenkhreisat7298]

I think he had to work on the second key and during selection you choose key number 2 Is this correct?

[@BestCarFixes]

i have to do it again

[@jorgemat8080]

VW when adding key is the same as all keys lost. You need a working key to begin but you must include that key when programming, so when asked key 1 is always your working key, then add as many as you like, if adding 2 you select 3 when adding 1 you select 2. The first key needs to be relearned back as key 1 or you lose it and have to do it again. We learn as we go but with VW be careful if you erase all keys by accident then you must read eeprom on the instrument cluster to add keys back.

[@BestCarFixes]

thank you for your support

[@segounlocks5029]

They key stayed programmed even tho he hit 1. But his mistake is because he hit 1 again when it asked about the remote.

[@jorgemat8080]

@segounlocks5029 when adding 1 key you need to start with it and when asked how many keys you adding you need to put 2 or it will only do the same key. Done it many times. The Remote function has nothing to do with the key to start the engine.

[@segounlocks5029]

@@jorgemat8080 Thats what I'm saying this is basically all keys lost. When you add 1 key you put in 2 keys because the original has to be reprogrammed because they all get erased. I'm just saying when you do remote programming in you put in 2 as well.

[@jorgemat8080]

@segounlocks5029 oh, ok I missed understood that part 👍.. that's right ✅️.

[@osasgodwin6451]

Good morning sir

[@trscentrekeyprogrammingsho9661]

Same mistake in previous video brother, we have to enter number of keys as 2

[@BestCarFixes]

thank you

[@osasgodwin6451]

I'm from Nigeria you can help me out for some difficult work please sir

[@mohammedalsalmi3974]

Thank you Nice

[@BestCarFixes]

"Thank you so much for your kind words and support. I truly appreciate it."

[@MEHBOOB_AUTO_ELECTRICTION]

Good