How to Train your Remee

[@alexrichienz]

It was a little difficult to figure out but once you get it, you're good! Cheers man!

[@nazaiwilliams3125]

Mines is not working at all

[@rainbowsengi2628]

@@nazaiwilliams3125 Mine neither! 😡

[@byrdo444]

worked first night! although one improvement I'd say to make for Remee II is add four more LED lights, have the normal six then one above and below the middle light on each side (making a plus sign). Reason why is sometimes when sleeping the mask slips up my face a bit, if there were a lower and higher LEDs then it'd still trigger lucidity even when slipping off

[@ckrokii]

TréCreative what can you do in your sleep?

[@YT-hr8yv]

Anything you want

[@TheMattShea]

@mumpsimus You're going to need to do some condition while you're awake. Question reality and do reality checks whenever you see and thpe of blinking light. This will carry over into your dreams, and you can use the blinking lights in the dream to trigger lucidity. Remember, it may seem quite obvious that you're awake in reality, but actually doing the reality checks are important. Dreams can be pretty convincing. Good luck!

[@TwinninXbow]

Woah hi

[@chittle1438]

lol

[@Stolas676]

Here before 500 replies

[@byrdo444]

Like flashing red lights, almost as if someone is shining a flashlight into your eyes, but a little more defined. I had it on the brightest setting.

[@Erroneus.]

Make sure the room you are in, are not to bright, when trying to program it. That can mess up the light sensors.

[@officialkidzeromusic]

make sure your screen brightness is turned up all the way. That was happening to me then I adjusted my brightness.

[@rainbowsengi2628]

THANK YOU! I DID THIS AND IT WORKED FIRST TIME!!

[@rainbowsengi2628]

I'm doing everything RIGHT, but my remee won't flash telling me I did it right. It did the first time I used it, but now it won't... It won't give me any signal... What am I doing wrong??? EDIT: Kid Zero suggested turning up the brightness of the computer and it work the first time! THANK YOU!!!

[@thenickvegas1268]

Great tutorial looking fwd to using it

[@artisticwingsyoga4559]

Wondered if you tell why only one side was successful when I tried updating settings thanks : )

[@paulsabbath1]

The idea is great.

[@igorgusev7261]

THIS IS AWESOME!!!!

[@looigi9447]

I had some trouble setting it up because after programming it didn't do anything, just stayed on with two LEDs but it worked eventually.

[@mehd0gbRdme]

i just got mine so once i program it i turn it off until i go to bed?

[@mumpsimus]

So far I've dreamt I was in a room with dancing flashlights, a movie theater with a bad projector, and seeing flashing lights on a police car - but in none of those did it occur to me that I was dreaming. Any tips?

[@kingbobbieboo702]

Prolly get urself into a habit I of doing a reality check every time u see the lights

[@Robinsonwood-re1vi]

can someone reply with the answer but right after youve programmed your remee can you turn it off please reply because ive just got one

[@nadialemoss4019]

do u need to program each time you use it?

[@kookiespace]

Just programmed my Remee. I'd be interested if this actually works :o From the Kickstarter video I fot the impression that Remee would messure the eye movement to detect if the user was REM-sleeping

[@TheEternalWisdom]

I don't even care about lucid dreams I just want a little lucidity so I can't astral project

[@darknebula5725]

Can you have astral projections?

[@Tonytw4553]

Do u have to program it for it to work

[@ismail_bel04]

Yes i think so

[@jremiahs]

I have the same problem ... my remee also doesn't accept the programming, i just stays blank

[@isabella4450]

I hold the button for 7 seconds but nothing happens. There’s no red lights or anything and no indication the customization worked

[@jewmangi]

Quick question when are we receiving the custom designed remees?

[@jremiahs]

GOOD NEWS: I have solved my programming-problem => just by enhancing the brightness of my computer to a maximum.

[@MichaelNwatu212]

Worked, give thanks!

[@cdebenz94]

But when its all set i turn off and turn back on stays on for only like 5 or 10 seconds then led lights stop

[@Pat_Loco]

When u turn it on the led lights will stay on and go off on their own which means it’s in normal night mode so u can go straight to sleep

[@cazer194]

I guess it's not working with IPS types of screens? I tried all positioning options - Remees lights never blink even a single time. I'm doing everything in a strict accordance to instructions.

[@cazer194]

Yep. Finally got to reprogram it on my phone.

[@benedictjohntomas6223]

ive resset several times but nothing

[@mrbigpig2189]

@@cazer194 how did you get the lights to blink

[@nathacartee1228]

So to use it just turn it on and choose brightness then leave it until it fades? Then that means it’s working?

[@bitbangerlabs4941]

Just FYI - we just released a new version, perhaps this will fix your issue

[@jewmangi]

yeah mine isnt accepting the programming at all, it just sits there blank

[@chillingisme]

Im having trouble I don't know when to program it to go off during my rem cycle because I don't know exactly when rem happens when I fall asleep some people say 90-120 minutes but I don't know if thats correct.

[@gamerz-yt5804]

wait so then what? do we just turn it on and put it on and go to sleep?

[@DaisyTolley]

Hey? A left lights has worked off in the inside. They didn’t work off in the outside. 😥

[@bitbangerlabs4941]

hello, from where did you purchase it

[@autumn_cactus8423]

Thanks :)

[@finndis5095]

How do you turn it on for a normal sleep

[@cleveland963]

MINE WILL NOT TURN ON, i dont know if the battery is dead, but no lights come on no matter what i try and it pissing me off

[@dredamon493]

so when u said remee is asleep and i should be too, does that mean im supposed to do nothing for ten seconds and let it go to sleep, or don't let it do that? im about to get it, so excited.

[@oskeman6855]

How do i make it in initial delay mode? Like how do I make it wait 6 hours and then blink?

[@combatfear4]

does it work?

[@bitbangerlabs4941]

@Zach Norris the mask hibernates after 13 hours but its probably a good idea to shut it off anyway.

[@AustinDoggie]

Yes, I see... But will it blend?

[@raulcarrera1372]

I didnt got any instructions in the box and my remee is not programing , it didnt came inside a bag or anything , i cannot use it because i dont know how and its frustrating nos finding the instructions online !!

[@why.u.even.care.]

You must hold the button 7 seconds. When you do all you must lie remee ON the display some you must do it often

[@QuestionTheAnswers]

Turn up the brightness on the computer You use to program it with all the way

[@Danno123-q1b]

it does not work for the programing.

[@soadjt]

When I click on a saved setting, it doesn't do anything. It doesn't show what the saved setting was, so basically I would have to remember what the settings were.

[@domshyra]

I never got a quick start guide with mine :(

[@jackbarrett1157]

Ik this is a little late but same my just came in a Amazon package

[@twostar-ii380]

Nice tutorial, however even with the brightness programmed to 100% and testing it with my eyes closed, I can't tell if the lights are on (with my eyes closed), the brightness is not string enough, anyone else with this issue? Update: The same test is successful without the black covering (I moved it down a bit for testing) - but the mask operates with the black sheet cover but it seems to be blocking the lights!

[@leonardobernal1034]

I have the same question, you had to take out the black cover to make it work?

[@twostar-ii380]

@@leonardobernal1034 Yes, I took in to a tailor and they sectioned the black sheet with a white one, it works fine now (with an area replacement of black with white cloth/sheet)

[@kosemoja8348]

Is there a phone app for this mask

[@TrevorTheLever]

Is there a way I can get a pdf of the instructions guide. I bought mine off craigslist and it didn't come with a box. :(

[@jewmangi]

my remee is having issue, after i hold the button for 7 seconds to do program mode the two lights on the left don't show up. So its not programming at all. I think after it goes to program mode it just shuts off.

[@MrChuang100]

I want to know that too.

[@TheNinadobrevfan]

which botton i have to push to start it ?

[@Sean-qq4fr]

Any idea?

[@TheEternalWisdom]

what do the LEDs look like in your dream

[@fannyroubin7890]

how does it know when I‘m sleeping?

[@Darkuira56]

Quick question do you remember your dream after using Remee?

[@qwoc]

Depends

[@qwoc]

I dont

[@ireadbooksmydadputsmetorea4062]

the fisrt time i did do it i rmember my dream, so i think it does help or make you rember your dream a bit

[@reecepierce]

So how to use it before sleep?

[@zombieunicorngamerzu2007]

My Remee will not program the right side! Ive literally tried everything and nothing is working. Please help, i really dont wanna think i wasted my money on this. I was so excited to use it and it doesnt even work. :(

[@bitbangerlabs4941]

Hi! Did you purchase it from sleepwithremee.com? We have had a few reports of masks not programming and in every case it was a fake

[@5plus9equals7]

Ah yes... That is the question.

[@randomaesthetic8986]

And how dies it charge?

[@y0ur.ch01ce5]

It doesn’t work when I try to program it

[@domshyra]

same here. mine won't update

[@Onlinebusinesspioneer]

I had to increase my brightness and take the device out of the mask

[@arturo1990]

what is nap mode?

[@nderohan]

It’s not an envelope it’s a box and bag and it’s not that hard to get the instructions out!

[@KSZB-cf8yz]

I cant turn it on can anyone help me

[@instantrevenge14]

Does anyone know a promo code for the remee?

[@ryanian4243]

The site is blocked for me does anybody know why it says not secure failed to connect to the database

[@bitbangerlabs4941]

Fixed - Problems with our hosting, sorry!

[@chaosflame7278]

My right light won’t program ? Wtf

[@jacksofd]

Sup man, did you ever figure out how to fix it? Mine is doing the same thing

[@joaq1999]

the basic instructions are in chinese, where can I download them in English, pls help

[@bitbangerlabs4941]

You have purchased a fake chinese knockoff

[@joaq1999]

nope, srry the English intructions where in there. I have a problem yet; I am setting it up for Nap Mode and apparently all is correct, flash lights confirm Nap Mode, etc; but it doesnt show flash lights after 20 mins. I did the reset-programming operation in case I screwed something but still not flash lights after 20 mins. I am experienced lucid dreamer so I know this device is not “magical” but also I know it actually works after some mental trainning so I am really interested on havig the mask running properly

[@bitbangerlabs4941]

@@joaq1999 Hi, if your remee had chinese instructions in it it's fake, which means it doesn't have real software on it - there's no telling how it works or what it's trying to do, unfortunately

[@joaq1999]

well it looks exactly like the other one, the box and everything... but yeah it has both English and Chinnese instructions. Also refers to the web site and everything

[@bitbangerlabs4941]

@@joaq1999 yes, it's pretty frustrating for us too

[@karinarojo6948]

alguien lo tiene en español

[@TheMattShea]

@mumpsimus I meant to say "any type of blinking light"

[@jeremiahlockaby2290]

This was a while ago man. Better times

[@BirdaeBlue]

@@jeremiahlockaby2290 better times...

[@junn._.21]

I want remee link

[@bitbangerlabs4941]

Drop us an email!

[@trissookram]

So now what?

[@lemuelkoh]

Profit

[@FloranBelle]

Can you make a app

[@redblade8160]

Crap!